TY - GEN A1 - Das, Chittaranjan A1 - Roy, Rajarshi A1 - Kedia, Mayank A1 - Kot, Małgorzata A1 - Zuo, Weiwei A1 - Félix, Roberto A1 - Sobol, Tomasz A1 - Flege, Jan Ingo A1 - Saliba, Michael T1 - Unraveling the Role of Perovskite in Buried Interface Passivation T2 - ACS Applied Materials & Interfaces N2 - Interfaces in perovskite solar cells play a crucial role in their overall performance, and therefore, detailed fundamental studies are needed for a better understanding. In the case of the classical n–i–p architecture, TiO2 is one of the most used electron-selective layers and can induce chemical reactions that influence the performance of the overall device stack. The interfacial properties at the TiO2/perovskite interface are often neglected, owing to the difficulty in accessing this interface. Here, we use X-rays of variable energies to study the interface of (compact and mesoporous) TiO2/perovskite in such a n–i–p architecture. The X-ray photoelectron spectroscopy and X-ray absorption spectroscopy methods show that the defect states present in the TiO2 layer are passivated by a chemical interaction of the perovskite precursor solution during the formation of the perovskite layer and form an organic layer at the interface. Such passivation of intrinsic defects in TiO2 removes charge recombination centers and shifts the bands upward. Therefore, interface defect passivation by oxidation of Ti3+ states, the organic cation layer, and an upward band bending at the TiO2/perovskite interface explain the origin of an improved electron extraction and hole-blocking nature of TiO2 in the n–i–p perovskite solar cells. KW - perovskite solar cells KW - interface KW - defects KW - photoemission spectroscopy Y1 - 2023 U6 - https://doi.org/10.1021/acsami.3c13085 SN - 1944-8244 SN - 1944-8252 VL - 15 IS - 48 SP - 56500 EP - 56510 ER - TY - GEN A1 - Kedia, Mayank A1 - Das, Chittaranjan A1 - Kot, Malgorzata A1 - Yalcinkaya, Yenal A1 - Zuo, Weiwei A1 - Tabah Tanko, Kenedy A1 - Matvija, Peter A1 - Ezquer, Mikel A1 - Cornago, Iñaki A1 - Hempel, Wolfram A1 - Kauffmann, Florian A1 - Plate, Paul A1 - Lira-Cantu, Monica A1 - Weber, Stefan A.L. A1 - Saliba, Michael T1 - Mitigating the amorphization of perovskite layers by using atomic layer deposition of alumina T2 - Energy & environmental science N2 - Atomic layer deposition of aluminum oxide (ALD-Al2O3) layers has recently been studied for stabilizing perovskite solar cells (PSCs) against environmental stressors, such as humidity and oxygen. In addition, the ALD-Al2O3 layer acts as a protective barrier, mitigating pernicious halide ion migration from the perovskite towards the hole transport interface. However, its effectiveness in preventing the infiltration of ions and additives from the hole-transport layer into perovskites remains insufficiently understood. Herein, we demonstrate the deposition of a compact ultrathin (∼0.75 nm) ALD-Al2O3 layer that conformally coats the morphology of a triple-cation perovskite layer. This promotes an effective contact of the hole transporter layer on top of the perovskite, thereby improving the charge carrier collection between these two layers. Upon systematically investigating the layer-by-layer structure of the PSC, we discovered that ALD-Al2O3 also acts as a diffusion barrier for the degraded species from the adjacent transport layer into the perovskite. In addition to these protective considerations, ALD-Al2O3 impedes the transition of crystalline perovskites to an undesired amorphous phase. Consequently, the dual functionality (i.e., enhanced contact and diffusion barrier) of the ALD-Al2O3 protection enhanced the device performance from 19.1% to 20.5%, while retaining 98% of its initial performance compared to <10% for pristine devices after 1500 h of outdoor testing under ambient conditions. Finally, this study deepens our understanding of the mechanism of ALD-Al2O3 as a two-way diffusion barrier, highlighting the multifaceted role of buffer layers in interfacial engineering for the long-term stability of PSCs. Y1 - 2025 U6 - https://doi.org/10.1039/D4EE05703A SN - 1754-5692 VL - 18 IS - 11 SP - 5250 EP - 5263 PB - Royal Society of Chemistry (RSC) CY - London ER -