TY - GEN A1 - Glawe, Christoph A1 - Schmidt, Heiko A1 - Kerstein, Alan R. A1 - Klein, Rupert T1 - XLES Part I: Introduction to Extended Large Eddy Simulation T2 - arXiv.org N2 - Direct numerical simulation (DNS), mostly used in fundamental turbulence research, is limited to low turbulent intensities due the current and future computer resources. Standard turbulence models, like RaNS (Reynolds averaged Navier-Stokes) and LES (Large Eddy Simulation), are applied to flows in engineering, but they miss small scale effects, which are frequently of importance, see e.g. the whole area of reactive flows, flows with apparent Prandtl or Schmidt number effects, or even wall bounded flows. A recent alternative to these standard approaches is the one-dimensional turbulence (ODT) model, which is limited to 1D sub-domains. In two papers we will provide a generalized filter strategy, called XLES (extended LES), including a formal theory (part I) and one special approach in the XLES family of models, called ODTLES (in part II (see Glawe et al. (2015))). ODTLES uses an ODT sub-grid model to describe all turbulent scales not represented by XLES, which leaves the larger scales to be simulated in 3D. This allows a turbulence modeling approach with a 3D resolution mainly independent of the turbulent intensity. Thus ODTLES is able to compute highly turbulent flows in domains of moderate complexity affordably and including the full range of turbulent and diffusive scales. The convergence of XLES to DNS is shown and the unconventional XLES advection approach is investigated in basic numerical tests. In part II, highly turbulent channel and duct flow results are discussed and show the future potential of XLES and ODTLES. Y1 - 2015 UR - http://arxiv.org/abs/1506.04930 ER - TY - GEN A1 - Glawe, Christoph A1 - Schmidt, Heiko A1 - Kerstein, Alan R. A1 - Klein, Rupert T1 - XLES Part II: From Extended Large Eddy Simulation to ODTLES T2 - arXiv.org N2 - In turbulence research and flow applications, turbulence models like RaNS (Reynolds averaged Navier-Stokes) models and LES (Large Eddy Simulation) are used. Both models filter the governing flow equations. Thus a scale separation approach is introduced for modeling purposes with the large scales simulated using a numerical scheme while smaller scales are assumed to be less important and might be modeled more or less easily. Unfortunately small scales are frequently of big importance, e.g. in reactive flows, wall bounded flows, or flows with significant Prandtl or Schmidt number effects. Recent alternatives to these standard models are the class of models based on the one-dimensional turbulence (ODT) idea, like ODTLES. The ability of ODT to capture highly turbulent flows (recently up to Reτ=6×105) allows ODTLES to realize 3D resolutions basically independent of the turbulent intensity. In two papers we provide a formal theory and application of an innovative modeling strategy for highly turbulent flows in domains of moderate complexity: In part I (see Glawe et al. (2015)) a new general filtering approach, called XLES (extended LES), is introduced. Contrary to LES, XLES is based on 2D filtering of the governing equations, whereby additional small scale terms are interpreted numerically. In this work a new ansatz for the ODTLES model is introduced as one special approach in the XLES family of models by incorporating the ODT model into XLES. The ODT model introduces microstructures not captured by the XLES filtered equations. To illustrate the ODTLES model capabilities, turbulent channel and duct flows up to friction Reynolds number Reτ=10000 are studied. Y1 - 2015 UR - http://arxiv.org/abs/1506.04938 ER -