TY - GEN A1 - Kaletta, Udo Christian A1 - Wipf, Christian A1 - Fraschke, Mirko A1 - Wolansky, Dirk A1 - Schubert, Markus Andreas A1 - Schroeder, Thomas A1 - Wenger, Christian T1 - AlN/SiO2/Si3N4/Si(100) based CMOS compatible surface acoustic wave filter with -12.8 dB minimum insertion loss T2 - IEEE Transactions on Electron Devices Y1 - 2015 U6 - https://doi.org/10.1109/TED.2015.2395443 SN - 0018-9383 VL - 62 IS - 3 SP - 764 EP - 768 ER - TY - GEN A1 - Bertaud, Thomas A1 - Walczyk, Damian A1 - Walczyk, Christian A1 - Kubotsch, S. A1 - Wenger, Christian A1 - Schröder, Thomas A1 - Vallée, Christophe A1 - Gonon, P. A1 - Mannequin, C. A1 - Jousseaume, V. A1 - Grampeix, Helen T1 - Resistive Switching of HfO2-based MIM diodes: Impact of the Top Electrode Materials T2 - Thin Solid Films Y1 - 2012 SN - 0040-6090 VL - 520 IS - 14 SP - 4551 EP - 4555 ER - TY - GEN A1 - Bertaud, Thomas A1 - Walczyk, Damian A1 - Sowinska, Małgorzata A1 - Wolansky, Dirk A1 - Tillack, Bernd A1 - Schoof, Gunther A1 - Korolevych, R. A1 - Wenger, Christian A1 - Thiess, Sebastian A1 - Schroeder, Thomas A1 - Walczyk, Christian T1 - HfO2-based RRAM for Embedded Nonvolatile Memory: From Materials Science to Integrated 1T1R RRAM Arrays T2 - ECS transactions Y1 - 2012 SN - 1938-6737 VL - 50 IS - 4 SP - 21 EP - 26 ER - TY - GEN A1 - Dersch, Nadine A1 - Perez-Bosch Quesada, Emilio A1 - Perez, Eduardo A1 - Wenger, Christian A1 - Roemer, Christian A1 - Schwarz, Mike A1 - Kloes, Alexander T1 - Efficient circuit simulation of a memristive crossbar array with synaptic weight variability T2 - Solid State Electronics N2 - In this paper, we present a method for highly-efficient circuit simulation of a hardware-based artificial neural network realized in a memristive crossbar array. The statistical variability of the devices is considered by a noise-based simulation technique. For the simulation of a crossbar array with 8 synaptic weights in Cadence Virtuoso the new approach shows a more than 200x speed improvement compared to a Monte Carlo approach, yielding the same results. In addition, first results of an ANN with more than 15,000 memristive devices classifying test data of the MNIST dataset are shown, for which the speed improvement is expected to be several orders of magnitude. Furthermore, the influence on the classification of parasitic resistances of the connection lines in the crossbar is shown. KW - RRAM KW - Neural network Y1 - 2023 U6 - https://doi.org/10.1016/j.sse.2023.108760 SN - 0038-1101 VL - 209 ER - TY - GEN A1 - Perez, Eduardo A1 - Maldonado, David A1 - Acal, Christian A1 - Ruiz-Castro, Juan Eloy A1 - Aguilera, Ana María A1 - Jimenez-Molinos, Francisco A1 - Roldan, Juan Bautista A1 - Wenger, Christian T1 - Advanced Temperature Dependent Statistical Analysis of Forming Voltage Distributions for Three Different HfO2-Based RRAM Technologies T2 - Solid State Electronics N2 - In this work, voltage distributions of forming operations are analyzed by using an advanced statistical approach based on phase-type distributions (PHD). The experimental data were collected from batches of 128 HfO2-based RRAM devices integrated in 4-kbit arrays. Three di erent switching oxides, namely, polycrystalline HfO2, amorphous HfO2, and Al-doped HfO2, were tested in the temperature range from -40 to 150 oC. The variability of forming voltages has been usually studied by using the Weibull distribution (WD). However, the performance of the PHD analysis demonstrated its ability to better model this crucial operation. The capacity of the PHD to reproduce the experimental data has been validated by means of the Kolmogorov-Smirnov test, while the WD failed in many of the cases studied. In addition, PHD allows to extract information about intermediate probabilistic states that occur in the forming process and the transition probabilities between them; in this manner, we can deepen on the conductive lament formation physics. In particular, the number of intermediate states can be related to the device variability. KW - RRAM KW - HfO2 Y1 - 2021 SN - 0038-1101 SN - 1879-2405 VL - 176 ER - TY - GEN A1 - Mai, Christian A1 - Marschmeyer, Steffen A1 - Peczek, Anna A1 - Kroh, Aleksandra A1 - Jose, Josmy A1 - Reiter, Sebastian A1 - Fischer, Inga Anita A1 - Wenger, Christian A1 - Mai, Andreas T1 - Integration Aspects of Plasmonic TiN-based Nano-Hole-Arrays on Ge Photodetectorsin a 200mm Wafer CMOS Compatible Silicon Technology T2 - ECS Transactions N2 - In this work we present the progress in regard to the integration of a surface plasmon resonance refractive index sensor into a CMOS compatible 200 mm wafer silicon-based technology. Our approach pursues the combination of germanium photodetectors with metallic nanohole arrays. The paper is focused on the technology development to fabricate large area photodetectors based on a modern design concept. In a first iteration we achieved a leakage current density of 82 mA/cm2 at reverse bias of 0.5 V and a maximum optical responsivity of 0.103 A/W measured with TE polarized light at λ = 1310 nm and a reversed bias of 1 V. For the realization of nanohole arrays we used thin Titanium nitride (TiN) layers deposited by a sputtering process. We were able to produce very homogenous TiN layers with a thickness deviation of around 10 % and RMS of 1.413 nm for 150 nm thick TiN layers. KW - plasmonics KW - nanohole array KW - germanium detector Y1 - 2022 U6 - https://doi.org/10.1149/10904.0035ecst SN - 1938-5862 VL - 109 IS - 4 SP - 35 EP - 46 ER - TY - GEN A1 - Han, Weijia A1 - Reiter, Sebastian A1 - Schlipf, Jon A1 - Mai, Christian A1 - Spirito, Davide A1 - Jose, Josmy A1 - Wenger, Christian A1 - Fischer, Inga Anita T1 - Strongly enhanced sensitivities of CMOS compatible plasmonic titanium nitride nanohole arrays for refractive index sensing under oblique incidence T2 - Optics Express N2 - Titanium nitride (TiN) is a complementary metal-oxide-semiconductor (CMOS) compatible material with large potential for the fabrication of plasmonic structures suited for device integration. However, the comparatively large optical losses can be detrimental for application. This work reports a CMOS compatible TiN nanohole array (NHA) on top of a multilayer stack for potential use in integrated refractive index sensing with high sensitivities at wavelengths between 800 and 1500 nm. The stack, consisting of the TiN NHA on a silicon dioxide (SiO2) layer with Si as substrate (TiN NHA/SiO2/Si), is prepared using an industrial CMOS compatible process. The TiN NHA/SiO2/Si shows Fano resonances in reflectance spectra under oblique excitation, which are well reproduced by simulation using both finite difference time domain (FDTD) and rigorous coupled-wave analysis (RCWA) methods. The sensitivities derived from spectroscopic characterizations increase with the increasing incident angle and match well with the simulated sensitivities. Our systematic simulation-based investigation of the sensitivity of the TiN NHA/SiO2/Si stack under varied conditions reveals that very large sensitivities up to 2305 nm per refractive index unit (nm RIU−1) are predicted when the refractive index of superstrate is similar to that of the SiO2 layer. We analyze in detail how the interplay between plasmonic and photonic resonances such as surface plasmon polaritons (SPPs), localized surface plasmon resonances (LSPRs), Rayleigh Anomalies (RAs), and photonic microcavity modes (Fabry-Pérot resonances) contributes to this result. This work not only reveals the tunability of TiN nanostructures for plasmonic applications but also paves the way to explore efficient devices for sensing in broad conditions. KW - TiN KW - Plasmonics Y1 - 2023 U6 - https://doi.org/10.1364/OE.481993 SN - 1094-4087 VL - 31 IS - 11 SP - 17389 EP - 17407 ER - TY - GEN A1 - Reiter, Sebastian A1 - Han, Weijia A1 - Mai, Christian A1 - Spirito, Davide A1 - Jose, Josmy A1 - Zöllner, Marvin Hartwig A1 - Fursenko, Oksana A1 - Schubert, Markus Andreas A1 - Stemmler, Ivo A1 - Wenger, Christian A1 - Fischer, Inga Anita T1 - Titanium Nitride Plasmonic Nanohole Arrays for CMOS-Compatible Integrated Refractive Index Sensing: Influence of Layer Thickness on Optical Properties T2 - Plasmonics Y1 - 2023 U6 - https://doi.org/10.1007/s11468-023-01810-3 SN - 1557-1963 SP - 1 EP - 13 ER - TY - GEN A1 - Matbaechi Ettehad, Honeyeh A1 - Wenger, Christian T1 - Characterization and Separation of Live and Dead Yeast Cells Using CMOS-Based DEP Microfluidics T2 - Micromachines N2 - This study aims at developing a miniaturized CMOS integrated silicon-based microfluidic system, compatible with a standard CMOS process, to enable the characterization, and separation of live and dead yeast cells (as model bio-particle organisms) in a cell mixture using the DEP technique. DEP offers excellent benefits in terms of cost, operational power, and especially easy electrode integration with the CMOS architecture, and requiring label-free sample preparation. This can increase the likeliness of using DEP in practical settings. In this work the DEP force was generated using an interdigitated electrode arrays (IDEs) placed on the bottom of a CMOS-based silicon microfluidic channel. This system was primarily used for the immobilization of yeast cells using DEP. This study validated the system for cell separation applications based on the distinct responses of live and dead cells and their surrounding media. The findings confirmed the device’s capability for efficient, rapid and selective cell separation. The viability of this CMOS embedded microfluidic for dielectrophoretic cell manipulation applications and compatibility of the dielectrophoretic structure with CMOS production line and electronics, enabling its future commercially mass production. KW - dielectrophoresis KW - microfluidics KW - cell characterization KW - CMOS Y1 - 2021 U6 - https://doi.org/10.3390/mi12030270 SN - 2072-666X VL - 12 IS - 3 ER - TY - GEN A1 - Soltani Zarrin, Pouya A1 - Wenger, Christian T1 - Implementation of Siamese-Based Few-Shot Learning Algorithms for the Distinction of COPD and Asthma Subjects T2 - Artificial Neural Networks and Machine Learning – ICANN 2020 : 29th International Conference on Artificial Neural Networks, Bratislava, Slovakia, September 15–18, 2020, Proceedings, Part I N2 - This paper investigates the practicality of applying braininspired Few-Shot Learning (FSL) algorithms for addressing shortcomings of Machine Learning (ML) methods in medicine with limited data availability. As a proof of concept, the application of ML for the detection of Chronic Obstructive Pulmonary Disease (COPD) patients was investigated. The complexities associated with the distinction of COPD and asthma patients and the lack of sufficient training data for asthma subjects impair the performance of conventional ML models for the recognition of COPD. Therefore, the objective of this study was to implement FSL methods for the distinction of COPD and asthma subjects with a few available data points. The proposed FSL models in this work were capable of recognizing asthma and COPD patients with 100% accuracy, demonstrating the feasibility of the approach for applications such as medicine with insufficient data availability. KW - Machine Learning KW - COPD Y1 - 2020 U6 - https://doi.org/10.1007/978-3-030-61609-0_34 SP - 431 EP - 440 PB - Springer CY - Cham ER - TY - GEN A1 - Perez-Avila, Antonio Javier A1 - Gonzalez-Cordero, Gerardo A1 - Perez, Eduardo A1 - Perez-Bosch Quesada, Emilio A1 - Mahadevaiah, Mamathamba Kalishettyhalli A1 - Wenger, Christian A1 - Roldan, Juan Bautista A1 - Jimenez-Molinos, Francisco T1 - Behavioral modeling of multilevel HfO2-based memristors for neuromorphic circuit simulation T2 - XXXV Conference on Design of Circuits and Integrated Systems (DCIS), Segovia, Spain N2 - An artificial neural network based on resistive switching memristors is implemented and simulated in LTspice. The influence of memristor variability and the reduction of the continuous range of synaptic weights into a discrete set of conductance levels is analyzed. To do so, a behavioral model is proposed for multilevel resistive switching memristors based on Al-doped HfO2 dielectrics, and it is implemented in a spice based circuit simulator. The model provides an accurate description of the conductance in the different conductive states in addition to describe the device-to-device variability KW - RRAM KW - Multilevel switching KW - behavorial model Y1 - 2020 U6 - https://doi.org/10.1109/DCIS51330.2020.9268652 ER - TY - GEN A1 - Morales, Carlos A1 - Mahmoodinezhad, Ali A1 - Schubert, Andreas Markus A1 - Wenger, Christian A1 - Henkel, Karsten A1 - Flege, Jan Ingo T1 - Functional ultra-thin oxide films deposited by atomic layer deposition on structured substrates T2 - Verhandlungen der DPG - SurfaceScience21 N2 - In the last decades, atomic layer deposition (ALD) has gained prominence in the materials and surface science communities owing to its high potential for integration as a scalable process in microelectronics. ALD's largest strengths are its well-controlled layer-by-layer deposition and growth conformity on 3D structures. Yet, the ALD technique is also well known to lead to amorphous and defective, non-stoichiometric thin films, resulting in modified materials properties that may even preferentially be used in certain applications. To study these issues, we have developed an in-situ ALD reactor attached to an X-ray photoelectron spectroscopy (XPS) system, capable of switching between both pump and flow-type operation. This novel tool allows to cover the entire range of compounds and recipes used in ALD, thus clarifying the role of such defects at different deposition stages, growth conditions and film/substrate interfaces. To exemplify these sorts of studies, we show the deposition of Al2O3 5-10 nm films on nanostructured Si, and their use as substrates for functional CeOx ALD deposits. KW - Atomic layer deposition KW - sensors KW - structured substrates KW - in-situ X-ray photoelectron spectroscopy Y1 - 2021 UR - https://www.dpg-verhandlungen.de/year/2021/conference/surfacescience/part/o/session/74/contribution/5 VL - 2021 PB - Deutsche Physikalische Gesellschaft e.V. CY - Bad Honnef ER - TY - GEN A1 - Perez, Eduardo A1 - Pérez-Ávila, Antonio Javier A1 - Romero-Zaliz, Rocío A1 - Mahadevaiah, Mamathamba Kalishettyhalli A1 - Pérez-Bosch Quesada, Emilio A1 - Roldan, Juan Bautista A1 - Jiménez-Molinos, Francisco A1 - Wenger, Christian T1 - Optimization of Multi-Level Operation in RRAM Arrays for In-Memory Computing T2 - Electronics (MDPI) N2 - Accomplishing multi-level programming in resistive random access memory (RRAM) arrays with truly discrete and linearly spaced conductive levels is crucial in order to implement synaptic weights in hardware-based neuromorphic systems. In this paper, we implemented this feature on 4-kbit 1T1R RRAM arrays by tuning the programming parameters of the multi-level incremental step pulse with verify algorithm (M-ISPVA). The optimized set of parameters was assessed by comparing its results with a non-optimized one. The optimized set of parameters proved to be an effective way to define non-overlapped conductive levels due to the strong reduction of the device-to-device variability as well as of the cycle-to-cycle variability, assessed by inter-levels switching tests and during 1k reset-set cycles. In order to evaluate this improvement in real scenarios, the experimental characteristics of the RRAM devices were captured by means of a behavioral model, which was used to simulate two different neuromorphic systems: an 8×8 vector-matrixmultiplication (VMM) accelerator and a 4-layer feedforward neural network for MNIST database recognition. The results clearly showed that the optimization of the programming parameters improved both the precision of VMM results as well as the recognition accuracy of the neural network in about 6% compared with the use of non-optimized parameters. KW - RRAM KW - Multilevel switching KW - In-memory computing Y1 - 2021 U6 - https://doi.org/10.3390/electronics10091084 SN - 2079-9292 VL - 10 IS - 9 ER - TY - GEN A1 - Perez, Eduardo A1 - Mahadevaiah, Mamathamba Kalishettyhalli A1 - Perez-Bosch Quesada, Emilio A1 - Wenger, Christian T1 - Variability and Energy Consumption Tradeoffs in Multilevel Programming of RRAM Arrays T2 - IEEE Transactions on Electron Devices N2 - Achieving a reliable multi-level programming operation in resistive random access memory (RRAM) arrays is still a challenging task. In this work, we assessed the impact of the voltage step value used by the programming algorithm on the device-to-device (DTD) variability of the current distributions of four conductive levels and on the energy consumption featured by programming 4-kbit HfO2-based RRAM arrays. Two different write-verify algorithms were considered and compared, namely, the incremental gate voltage with verify algorithm (IGVVA) and the incremental step pulse with verify algorithm (ISPVA). By using the IGVVA, a main trade-off has to be taken into account since reducing the voltage step leads to a smaller DTD variability at the cost of a strong increase in the energy consumption. Although the ISPVA can not reduce the DTD variability as much as the IGVVA, its voltage step can be decreased in order to reduce the energy consumption with almost no impact on the DTD variability. Therefore, the final decision on which algorithm to employ should be based on the specific application targeted for the RRAM array. KW - RRAM KW - Multilevel switching KW - HfO2 Y1 - 2021 U6 - https://doi.org/10.1109/TED.2021.3072868 SN - 0018-9383 SN - 1557-9646 VL - 68 IS - 6 SP - 2693 EP - 2698 ER - TY - GEN A1 - Romero-Zaliz, Rocío A1 - Perez, Eduardo A1 - Jimenez-Molinos, Francisco A1 - Wenger, Christian A1 - Roldan, Juan Bautista T1 - Influence of variability on the performance of HfO2 memristor-based convolutional neural networks T2 - Solid State Electronics N2 - A study of convolutional neural networks (CNNs) was performed to analyze the influence of quantization and variability in the network synaptic weights. Different CNNs were considered accounting for the number of convolutional layers, size of the filters in the convolutional layer, number of neurons in the final network layers and different sets of quantization levels. The conductance levels of fabricated 1T1R structures based on HfO2 memristors were considered as reference for four or eight level quantization processes at the inference stage of the CNNs, which were previous trained with the MNIST dataset. We also included the variability of the experimental conductance levels that was found to be Gaussian distributed and was correspondingly modeled for the synaptic weight implementation. KW - RRAM KW - neural network KW - HfO2 KW - memristive switching Y1 - 2021 U6 - https://doi.org/10.1016/j.sse.2021.108064 SN - 0038-1101 VL - 185 ER - TY - GEN A1 - Yun, Min Ju A1 - Lee, Doowon A1 - Kim, Sungho A1 - Wenger, Christian A1 - Kim, Hee-Dong T1 - A nonlinear resistive switching behaviors of Ni/HfO2/TiN memory structures for self-rectifying resistive switching memory T2 - Materials Characterization N2 - This work reports forming free/self-rectifying resistive switching characteristics and dependency of the top electrode (TE) of a crystalline HfO2-based resistive switching memory device. In the memory cells, nonlinear bipolar resistive switching characteristics, i.e., an asymmetric current-voltage curve like the Schottky diode, was observed. In addition, the device exhibits resistive switching behaviors without forming process, which makes it possible to switch the resistance state under ultra-low current levels of <10 nA. In addition, compared to the resistive switching of the proposed resistive switching memory devices with different TEs, the VSET was decreased when using TE with lower work function, and the height read margin was obtained in the sample with the Ni TE, covering over 56 × 56 arrays. Consequently, these results indicate that the interface control resistive switching properties in memory structures having the Schottky junction warrant the realization of selector-free resistive switching memory cells in a high-density crossbar array. KW - RRAM KW - resistive switching KW - HfO2 Y1 - 2021 U6 - https://doi.org/10.1016/j.matchar.2021.111578 SN - 1044-5803 VL - 182 ER - TY - GEN A1 - Perez-Bosch Quesada, Emilio A1 - Perez, Eduardo A1 - Mahadevaiah, Mamathamba Kalishettyhalli A1 - Wenger, Christian T1 - Memristive-based in-memory computing: from device to large-scale CMOS integration T2 - Neuromorphic Computing and Engineering N2 - With the rapid emergence of in-memory computing systems based on memristive technology, the integration of such memory devices in large-scale architectures is one of the main aspects to tackle. In this work we present a study of HfO2-based memristive devices for their integration in large-scale CMOS systems, namely 200 mm wafers. The DC characteristics of single metal–insulator–metal devices are analyzed taking under consideration device-to-device variabilities and switching properties. Furthermore, the distribution of the leakage current levels in the pristine state of the samples are analyzed and correlated to the amount of formingless memristors found among the measured devices. Finally, the obtained results are fitted into a physic-based compact model that enables their integration into larger-scale simulation environments. KW - RRAM KW - memristive device KW - HfO2 Y1 - 2021 U6 - https://doi.org/10.1088/2634-4386/ac2cd4 SN - 2634-4386 VL - 1 IS - 2 ER - TY - GEN A1 - Romero-Zaliz, Rocio A1 - Cantudo, Antonio A1 - Perez, Eduardo A1 - Jimenez-Molinos, Francisco A1 - Wenger, Christian A1 - Roldan, Juan Bautista T1 - An Analysis on the Architecture and the Size of Quantized Hardware Neural Networks Based on Memristors T2 - Electronics (MDPI) N2 - We have performed different simulation experiments in relation to hardware neural networks (NN) to analyze the role of the number of synapses for different NN architectures in the network accuracy, considering different datasets. A technology that stands upon 4-kbit 1T1R ReRAM arrays, where resistive switching devices based on HfO2 dielectrics are employed, is taken as a reference. In our study, fully dense (FdNN) and convolutional neural networks (CNN) were considered, where the NN size in terms of the number of synapses and of hidden layer neurons were varied. CNNs work better when the number of synapses to be used is limited. If quantized synaptic weights are included, we observed thatNNaccuracy decreases significantly as the number of synapses is reduced; in this respect, a trade-off between the number of synapses and the NN accuracy has to be achieved. Consequently, the CNN architecture must be carefully designed; in particular, it was noticed that different datasets need specific architectures according to their complexity to achieve good results. It was shown that due to the number of variables that can be changed in the optimization of a NN hardware implementation, a specific solution has to be worked in each case in terms of synaptic weight levels, NN architecture, etc. KW - RRAM KW - memristive device KW - neural network Y1 - 2021 U6 - https://doi.org/10.3390/electronics10243141 SN - 2079-9292 VL - 10 IS - 24 ER - TY - GEN A1 - Bischoff, Carl A1 - Leise, Jakob A1 - Perez-Bosch Quesada, Emilio A1 - Perez, Eduardo A1 - Wenger, Christian A1 - Kloes, Alexander T1 - Implementation of device-to-device and cycle-to-cycle variability of memristive devices in circuit simulations T2 - Solid-State Electronics N2 - We present a statistical procedure for the extraction of parameters of a compact model for memristive devices. Thereby, in a circuit simulation the typical fluctuations of the current–voltage (I-V) characteristics from device-to-device (D2D) and from cycle-to-cycle (C2C) can be emulated. The approach is based on the Stanford model whose parameters play a key role to integrating D2D and C2C dispersion. The influence of such variabilities over the model’s parameters is investigated by using a fitting algorithm fed with experimental data. After this, the statistical distributions of the parameters are used in a Monte Carlo simulation to reproduce the I-V D2D and C2C dispersions which show a good agreement to the measured curves. The results allow the simulation of the on/off current variation for the design of RRAM cells or memristor-based artificial neural networks. KW - RRAM KW - circuit simulation KW - HfO2 Y1 - 2022 U6 - https://doi.org/10.1016/j.sse.2022.108321 SN - 0038-1101 VL - 194 ER - TY - GEN A1 - Mannocci, Piergiulio A1 - Baroni, Andrea A1 - Melacarne, Enrico A1 - Zambelli, Cristian A1 - Olivo, Piero A1 - Perez, Eduardo A1 - Wenger, Christian A1 - Ielmini, Daniele T1 - In-Memory Principal Component Analysis by Crosspoint Array of Rresistive Switching Memory T2 - IEEE Nanotechnology Magazine N2 - In Memory Computing (IMC) is one of the most promising candidates for data-intensive computing accelerators of machine learning (ML). A key ML algorithm for dimensionality reduction and classification is principal component analysis (PCA), which heavily relies on matrixvector multiplications (MVM) for which classic von Neumann architectures are not optimized. Here, we provide the experimental demonstration of a new IMCbased PCA algorithm based on power iteration and deflation executed in a 4-kbit array of resistive switching random-access memory (RRAM). The classification accuracy of the Wisconsin Breast Cancer data set reaches 95.43%, close to floatingpoint implementation. Our simulations indicate a 250× improvement in energy efficiency compared to commercial GPUs, thus supporting IMC for energy-efficient ML in modern data-intensive computing. KW - RRAM KW - Multilevel switching KW - neural network Y1 - 2022 U6 - https://doi.org/10.1109/MNANO.2022.3141515 SN - 1932-4510 VL - 16 IS - 2 SP - 4 EP - 13 ER -