TY - CHAP A1 - Richter, Christian ED - Hess, Wolfgang ED - Stöber, Karlheinz T1 - Gestaltung von Testumgebungen zur Beurteilung von Sprachproben T2 - Elektronische Sprachsignalverarbeitung, Tagungsband der zwölften Konferenz, Bonn, 24. bis 26. September 2001 Y1 - 2001 SN - 3-935712-62-6 SP - 144 EP - 150 PB - w.e.b. CY - Dresden ER - TY - CHAP A1 - Fellbaum, Klaus A1 - Höpfner, Dirk A1 - Richter, Christian T1 - Auditive Verfahren zur Sprachqualitätsmessung - Übersicht, Gestaltung und Anwendung Y1 - 2003 ER - TY - CHAP A1 - Richter, Christian ED - Hentschel, Christian T1 - Internetbasierte auditive Testverfahren T2 - Sprachsignalverarbeitung : Analyse und Anwendungen ; zum 65. Geburtstag von Klaus Fellbaum Y1 - 2007 SN - 978-3-940046-02-4 SP - 113 EP - 120 PB - TUDpress CY - Dresden ER - TY - CHAP A1 - Richter, Christian A1 - Holfeld, Tobias ED - Wolff, Matthias T1 - Gestörte akustische Umgebungen und ihr Einfluss auf netzbasierte auditive Testverfahren T2 - Elektronische Sprachsignalverarbeitung 2012, Tagungsband der 23. Konferenz Cottbus, 29. – 31. August 2012 Y1 - 2012 SN - 978-3-942710-81-7 SP - 275 EP - 282 PB - TUDpress CY - Dresden ER - TY - GEN A1 - Fischer, Christian B. A1 - Rohrbeck, Magdalena A1 - Wehner, Stefan A1 - Richter, Matthias A1 - Schmeißer, Dieter T1 - Interlayer formation of diamond-like carbon coatings on industrial polyethylene: Thickness dependent surface characterization by SEM, AFM and NEXAFS T2 - Applied Surface Science N2 - The coating of materials with diamond-like carbon (DLC) is a very common way to change and improve their basic characteristics. Although DLC is used on several substrates, the chemical and physical properties throughout the coating process on plastics are yet sparsely investigated. Two types of protective coatings one sp3-enriched (robust, r-type) and one with more sp2-centers (flexible, f-type) have been realized on polyethylene by PECVD deposition. SEM and AFM analysis of coated samples of DLC types revealed diverse surface topographies on different scales and images appeared even differently smoothed by the carbonaceous deposits. Grains of both DLC types are platelet-shaped and nearly double in size for the robust type indicating fundamental differences in the epitaxial DLC growth. NEXAFS spectroscopy showed significant details of carbon centers in chemically different neighborhood displaying a characteristic fingerprint behavior. Comparison of deposition models revealed a mechanism of interlayer formation which is discussed in detail. Interlayer formation is clearly the appropriate explanation of the process for the current carbon deposition between these two unequal materials. An improved understanding of hard DLC and soft polyethylene assembly is given in the presented work. KW - Diamond-like carbon KW - Interlayer formation KW - Polyethylene KW - Surface characterization KW - Coatings KW - Plastics Y1 - 2013 U6 - https://doi.org/10.1016/j.apsusc.2013.01.210 SN - 0169-4332 IS - 271 SP - 381 EP - 389 ER - TY - CHAP A1 - Richter, Christian ED - Hoffmann, Rüdiger T1 - Optimierung internetbasierter auditiver Sprachgütemessverfahren T2 - Tagungsband zur 13. Konferenz "Elektronische Sprachsignalverarbeitung", Dresden, 25.-27.09.2002 Y1 - 2002 SN - 3-935712-72-3 SP - 399 EP - 406 PB - w.e.b. Universitätsverlag CY - Dresden ER - TY - CHAP A1 - Fischer, Christian B. A1 - Rohrbeck, Magdalena A1 - Wehner, Stefan A1 - Richter, Matthias A1 - Schmeißer, Dieter T1 - Diamond-Like Carbon Coatings on Selected Plastic Materials T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 47 N2 - The manufacturing of synthetic materials and their wide range of use for daily life is accompanied by essential requirements. Besides the basic performance of materials such as flexibility, elasticity, fracture strength and chemical resistance, further determinants are long term stability or biocompatibility. To overcome mismatches in surface characteristics of optimal parent material they can be customized for their intended use resulting in suitable coatings for profitable applications. The determining factor for such modifications is the preservation of basic material performance in addition to the benefit of further advantages like changed adhesive, improved repellent or antibacterial behavior. Protective coatings of selected plastic materials have been realized by depositing a few layers of diamond-like carbon (DLC). The assembly of soft plastic material and robust DLC coating is important for the resulting material characteristics. The detailed understanding of materials interphasing between these unequal materials and the conjunction of carbon centers in chemically different neighborhood is part of the presented work. Results will be transferable to other plastic materials with diverse needs, e.g. energy storage devices, water treatments and coatings for everyday commodities or industrial parts. Y1 - 2012 UR - http://www.dpg-verhandlungen.de/year/2012/conference/berlin/part/o/session/66/contribution/9 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Rohrbeck, Magdalena A1 - Fischer, Christian B. A1 - Wehner, Stefan A1 - Richter, Matthias A1 - Schmeißer, Dieter T1 - Diamond-Like Carbon Coatings on Industrial Polyethylene Surfaces T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 47 N2 - Synthetic materials are used in a wide variety of fields. Depending on the intended application the plastic material must meet specific requirements. Since the material always interacts with its environment, particular attention is required regarding the surface. Possible damage of the plastic material and further risks could be caused by the adhesion of bacteria, biofilm formation and encrustations. Therefore, bacteria-repellent coatings and surface-modified materials that allow for an effective removal of adhered bacteria are of extremely high interest for many applications. In this study Polyethylene (PE) is chosen as simplest model for relevant plastic materials. Surface modification of PE samples is accomplished by plasma-deposited diamond-like carbon (DLC) coatings to achieve increased abrasion strength and bacterial resistance. Two types of nanometer-scaled DLC films with different layer thicknesses are compared by multiscale microscopic analysis. Further spectroscopic measurements with synchrotron radiation are performed. These results will provide an enhanced understanding of layer formation at the interface between the basic plastic material and the DLC coating and will possibly lead to optimal parameters for the surface coating to achieve improved product characteristics. Y1 - 2012 UR - http://www.dpg-verhandlungen.de/year/2012/conference/berlin/part/o/session/35/contribution/28 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Richter, Christian A1 - Lindemann, Jens A1 - Römer, Ronald A1 - Wolff, Matthias ED - Wirsching, Günther T1 - Das Labor für kognitive Systeme an der BTU Cottbus-Senftenberg T2 - Tagungsband, 26. Konferenz Elektronische Sprachsignalverarbeitung, 25.-27.03.2015, Eichstätt Y1 - 2015 SN - 978-3-95908-000-2 SP - 240 EP - 247 PB - TUDpress CY - Dresden ER - TY - CHAP A1 - Richter, Christian A1 - Tursch, Philipp ED - Woll, Ralf T1 - Vorbereitet sein und verbunden bleiben - Möglichkeiten zur Involvement-Messung T2 - Handhabung von Maßstäben für schwerquantifizierbare Qualitätsmerkmale Y1 - 2015 SN - 978-3-8300-8326-9 SP - 37 EP - 50 PB - Kovač CY - Hamburg ER - TY - CHAP A1 - Rösken, Liz M. A1 - Rohrbeck, Magdalena A1 - Catena, Alberto A1 - Wehner, Stefan A1 - Fischer, Christian B. A1 - Richter, Matthias A1 - Städter, Matthias A1 - Schmeißer, Dieter T1 - Characterization of diamond-like carbon (DLC) coatings on industrial polyethylene and polyoxymethylene by SEM, AFM and NEXAFS T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - Diamond-like carbon (DLC) coatings are often utilized to change the base properties of raw materials, e. g. to gain robust or chemically inert surfaces. Here the deposition of hard DLC layers on soft polymers is tested. The common industrial polymers polyethylene (PE) and polyoxymethylene (POM) serve as model substrates in the present work. In order to examine the effect of the carbonaceous layers on PE and POM thin diamond-like carbon films were realized via PECVD. The topography of the different coatings was detected by AFM and SEM uncovering the different influence of the substrate material, e. g. interlayer formation for PE. The composition of the surface structures were analyzed in more detail by NEXAFS, showing the hybridization of carbon atoms in chemical different surroundings from the pure polymer to the carbon coating. The comparison of carbon coated PE- and POM-composites enables valuable insights into the interaction between soft substrates and hard coatings. For the chosen settings in PECVD, POM showed incomplete coating, while on PE a very stable and robust composite has formed. KW - Diamond-like carbon (DLC) KW - soft plolymers KW - Scanning electron microscopy (SEM) KW - Atomic foce microscopy (AFM) KW - Near-edge X-Ray absorption spectroscopy (NEXAFS) Y1 - 2014 UR - http://www.dpg-verhandlungen.de/year/2014/conference/dresden/part/ds/session/43/contribution/20?lang=en SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Fischer, Christian B. A1 - Rohrbeck, Magdalena A1 - Wehner, Stefan A1 - Richter, Matthias A1 - Städter, Matthias A1 - Schmeißer, Dieter T1 - Interlayer formation of Diamond-Like Carbon Coatings on Polyethylene Plastic Material T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - The coating of materials with diamond-like carbon (DLC) is a very common way to further improve and modify surface specific properties. Although DLC is frequently used as a protective coating on several substrates, the chemical and physical properties throughout the coating process on plastics are yet sparsely investigated. Different layer thicknesses of two types of protective coatings one sp3-enriched (robust, r-type) and one with more sp2-centers (flexible, f-type) have been realized on polyethylene by PECVD. Microscopic analysis showed diverse surface topographies for the two DLC-types. NEXAFS spectroscopy revealed significant details of carbon centers in chemically different neighborhood displaying a characteristic fingerprint behavior. The appropriate explanation for the current carbon deposition process is obviously the formation of an interlayer between these unequal materials. An improved understanding of hard DLC and soft polyethylene assembly is part of the present work. KW - Diamond-like carbon (DLC) KW - topography KW - X-ray absorption spectroscopy KW - plasma enhanced chemical vapor deposition Y1 - 2013 UR - http://www.dpg-verhandlungen.de/year/2013/conference/regensburg/part/o/session/33/contribution/4?lang=de PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Peplowsky, Stefan A1 - Richter, Christian A1 - Jacobitz, S. A1 - Woll, Ralf ED - Dahlgaard-Park, Su Mi ED - Dahlgaard, Jens Jörn T1 - Individuality - A challenge for production and quality T2 - Proceedings, 19th QMOD-ICQSS Conference International Conference on Quality and Service Sciences, Rom (Italy) Y1 - 2016 SN - 978-91-7623-086-2 SP - 1538 EP - 1546 PB - Lund CY - Lund University Library Press ER - TY - CHAP A1 - Tschöpe, Constanze A1 - Duckhorn, Frank A1 - Blüthgen, Peter A1 - Richter, Christian A1 - Papsdorf, Gunther A1 - Wolff, Matthias T1 - Miniaturisiertes System zur intelligenten Signalverarbeitung T2 - DGZFP-Jahrestagung 2017, Zerstörungsfreie Materialprüfung, Koblenz, 22.-24.05.2017, Kurzfassungen der Vorträge und Posterbeiträge Y1 - 2017 UR - https://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&ved=0ahUKEwiOtpCM7-zUAhXBZ1AKHXMyBQYQFghDMAQ&url=https%3A%2F%2Fjahrestagung.dgzfp.de%2FPortals%2F151%2Fdownloads%2FKufa_alles_oP%2520-%2520GESAMT%2520-%2520ohne%2520Anzeigen.pdf%3Fver%3D2017-05-19-135955-633&usg=AFQjCNGFKZug7Xf1FFhVCqafxEFIyDEIeA&cad=rja SP - S. 192 PB - DGZIP CY - Berlin ER - TY - GEN A1 - Richter, Martin A1 - Winkler, Herwig A1 - Kaucher, Christian A1 - Sarram, Amirhossein T1 - Investigation and analysis of accumulators for the use of electrochemical storage in hybrid shunting locomotives T2 - Procedia CIRP N2 - This paper evaluates storage batteries with respect to usage in hybrid shunting locomotives. Topics are the status quo of existing technologies as well as future electrochemical storage technologies. A target system is used to evaluate the technologies. Furthermore, relevant battery characteristics for the usage in hybrid shunting locomotives have been identified. The necessary data have been retrieved from current literature (document analysis) and by a survey made with scientific and industrial experts. The results of the study show, that batteries of the lithium-ion-technology with a lithium-titanate anode and a lithium-iron-phosphate cathode are currently the most suitable batteries for the use in hybrid shunting locomotives. Promising future technologies are under investigation, but these technologies are several years away from their market entry. KW - Current status of batteries KW - future technologies KW - relevant charactristics of batteries for hybrid locomotives KW - battery technologies Y1 - 2019 U6 - https://doi.org/10.1016/j.procir.2019.03.243 SN - 2212-8271 VL - 81 SP - 1010 EP - 1015 ER - TY - GEN A1 - Wachtler, Benjamin A1 - Hoffmann, Stephanie A1 - Blume, Miriam A1 - Rattay, Petra A1 - Herr, Raphael A1 - Deindl, Christian A1 - Sundmacher, Leonie A1 - Richter, Matthias A1 - Spallek, Jacob A1 - Lampert, Thomas T1 - The impact of the family on health inequalities in children – A systematic scoping review T2 - European Journal of Public Health N2 - Background Health inequalities in school-aged children and adolescents were repeatedly reported across Europe but less is known about the contextual and compositional factors of families that might influence and reproduce those health inequalities. In this systematic scoping review we aim to provide a comprehensive overview of the available international literature on the mediating and moderating influence of the family on health inequalities in children and adolescents in Europe and North America. Methods This review follows the PRISMA guidelines for scoping reviews. After defining the research question a search strategy was developed in cooperation with a scientific librarian and the study protocol was registered. A search of three databases (Pubmed, Scopus, PsycINFO) was conducted to identify relevant literature in English or German published between the year 2000 and 2019. A qualitative data charting process was used to extract the relevant data. Results In total 11.838 records were identified through the multi database search (Pubmed n = 6370, PsycINFO n = 3505, Scopus n = 1963). After elimination of duplicates and records from excluded countries, 8862 abstracts were screened by two researchers independently. Different cluster of evidence of family influences on health inequalities were identified: Parental behaviors and children's obesity, parents' smoking and drinking habits and adolescents' risk behaviors, parenting style and children's common mental disorders, parental resources and children's quality of life. Conclusions There are different aspects of family's contextual and compositional characteristics on health inequalities identifiable in the international literature. These characteristics might be new targets for family-focused health promotion strategies. Key messages: -A systematic scoping review found different family aspects that influence health inequalities in children and adolescents. - The identified family traits are promising targets for family-focused health promotion strategies to reduce health inequalities. KW - Health inequalities KW - family KW - scoping review KW - children KW - adolescents Y1 - 2020 U6 - https://doi.org/10.1093/eurpub/ckaa166.898 SN - 1101-1262 SN - 1464-360X VL - 30 IS - Supplement_5 PB - Univ. Press CY - Oxford ER - TY - GEN A1 - Meyer, Werner A1 - Borislavov, Borislav A1 - Eckert, Friedrich A1 - Richter, Christian A1 - Römer, Ronald A1 - Beim Graben, Peter A1 - Huber, Markus A1 - Wolff, Matthias ED - Hillmann, Stefan ED - Weiss, Benjamin ED - Michael, Thilo ED - Möller, Sebastian T1 - Formalisierung und Implementierung einer adaptiven kognitiven Architektur unter Verwendung von Strukturdiagrammen T2 - Elektronische Sprachsignalverarbeitung 2021 : Tagungsband der 32. Konferenz Berlin, 3.-5. März 2021 N2 - Das Fachgebiet der Kognitiven Technischen Systeme zeichnet sich durch einen hohen Grad an Interdisziplinarität (z. B. Kenntnisse auf den Gebieten Biologie, Psychologie, Informatik und den Ingenieurwissenschaften) aus. Nach wie vor besteht Bedarf an einer methodischen Darstellung des Fachgebietes, bei der die theoretische Durchdringung von Zusammenhängen zwischen den verschiedenen Wissensgebieten zusätzlich durch Anschaulichkeit unterstützt wird. Die vorliegende Arbeit stellt einen Fortschrittsbericht zur Realisierung eines Forschungs- und Experimentiersystems dar, mit dem wir dieses Anliegen unterstützen und über das wir erstmals konzeptionell in [1] berichtet haben. In diesem Beitrag folgen wir einem integrativen Ansatz zur Entwicklung einer kognitiven Architektur, mit der unter Verwendung repräsentationaler Datenstrukturen adaptives Verhalten auf verschiedenen Zeitskalen sowie zwei wichtige Verhaltensprogramme für das Problemlösen (Objektfindung, Exploration) auf der gemeinsamen Grundlage von Markov-Entscheidungsprozessen umgesetzt werden. Mit einem Kurzbericht zum Entwicklungsstand der physikalischen Experimentierumgebung und einer Zusammenfassung der bislang erreichten Ergebnisse beschließen wir den diesjährigen Beitrag. Y1 - 2021 UR - https://www.essv.de/?year=2021 SN - 978-3-959082-27-3 SN - 0940-6832 SP - 67 EP - 76 PB - TUDpress CY - Dresden ER - TY - GEN A1 - Strobel, Carsten A1 - Alvarado Chavarin, Carlos A1 - Leszczynski, Sebastian A1 - Richter, Karola A1 - Knaut, Martin A1 - Reif, Johanna A1 - Völkel, Sandra A1 - Albert, Matthias A1 - Wenger, Christian A1 - Bartha, Johann Wolfgang A1 - Mikolajick, Thomas T1 - Improved Graphene-base Heterojunction Transistor with Different Collector Semi-conductors for High-frequency Applications T2 - Advanced Materials Letters N2 - A new kind of transistor device with a graphene monolayer embedded between two n-type silicon layers is fabricated and characterized. The device is called graphene-base heterojunction transistor (GBHT). The base-voltage controls the current of the device flowing from the emitter via graphene to the collector. The transit time for electrons passing by the ultrathin graphene layer is extremely short which makes the device very promising for high frequency RF-electronics. The output current of the device is saturated and clearly modulated by the base voltage. Further, the silicon collector of the GBHT is replaced by germanium to improve the device performance. This enabled the collector current to be increased by almost three orders of magnitude. Also, the common-emitter current gain (Ic/Ib) increased from 10-3 to approximately 0.3 for the newly designed device. However, the ON-OFF ratio of the improved germanium based GBHT has so far been rather low. Further optimizations are necessary in order to fully exploit the potential of the graphene-base heterojunction transistor. KW - Graphene KW - transistor Y1 - 2022 U6 - https://doi.org/10.5185/amlett.2022.011688 SN - 0976-3961 VL - 13 IS - 1 ER - TY - GEN A1 - Matos Fialho, Paula Mayara A1 - Dragano, Nico A1 - Reuter, Marvin A1 - Deindl, Christian A1 - Schleberger, Sarah A1 - Metzendorf, Maria-Inti A1 - Hoffmann, Stephanie A1 - Diehl, Katharina A1 - Wachtler, Benjamin A1 - Schüttig, Wiebke A1 - Herke, Max A1 - Richter, Matthias A1 - Pischke, Claudia R. T1 - School-to-work and school-to-university transition and health inequalities among young adults: a scoping review T2 - BMJ Open N2 - Objectives The main objective was to systematically map evidence regarding the emergence of health inequalities in individuals aged 16–24 years during school-to-work and school-to-university transition (STWT). Second, we aimed to summarise the evidence on potential effects of contextual and compositional characteristics of specific institutional contexts entered during STWT on health and health behaviours. Design Scoping review. Study selection Relevant literature was systematically searched following the methodological framework proposed by Arksey and O’Malley. Ovid MEDLINE and Web of Science, and websites of the International Labour Organization and National Institute for Occupational Safety and Health were searched, using a predetermined search strategy. Articles in English or German published between 1 January 2000 and 3 February 2020 were considered. Data extraction To collect the main information from the selected studies, a data extraction spreadsheet was created. Data were summarised and grouped into five health outcomes and five institutional contexts (school, vocational training, university, work, unemployment). Results A total of 678 articles were screened for inclusion. To be able to draw a picture of the development of various health outcomes over time, we focused on longitudinal studies. Forty-six prospective studies mapping health-related outcomes during STWT were identified. Higher family socioeconomic position (SEP) was associated with higher levels of health behaviour and lower levels of health-damaging behaviour, but there was also some evidence pointing in the opposite direction. Disadvantaged family SEP negatively impacted on mental health and predicted an adverse weight development. There was limited evidence for the outcomes physical/somatic symptoms and self-rated health. Meso-level characteristics of the institutional contexts identified were not systematically assessed, only individual-level factors resulting from an exposure to these contexts, rendering an analysis of effects of contextual and compositional characteristics on health and health behaviours impossible. Conclusions This scoping review demonstrated a wide range of health inequalities during STWT for various health outcomes. However, knowledge on the role of the core institutional contexts regarding the development of health inequalities is limited. KW - School-to-work transition KW - school-to-university transition KW - health inequalities KW - young adults KW - scoping review Y1 - 2022 UR - https://bmjopen.bmj.com/content/12/7/e058273 U6 - https://doi.org/10.1136/bmjopen-2021-058273 SN - 2044-6055 VL - 12 IS - 7 SP - e058273 ER - TY - GEN A1 - Strobel, Carsten A1 - Alvarado Chavarin, Carlos A1 - Richter, Karola A1 - Knaut, Martin A1 - Reif, Johanna A1 - Völkel, Sandra A1 - Jahn, Andreas A1 - Albert, Matthias A1 - Wenger, Christian A1 - Kirchner, Robert A1 - Bartha, Johann Wolfgang A1 - Mikolajick, Thomas T1 - Novel Graphene Adjustable-Barrier Transistor with Ultra-High Current Gain T2 - ACS Applied Materials & Interfaces N2 - A graphene-based three terminal barristor device was proposed to overcome the low on/off ratios and insufficient current saturation of conventional graphene field effect transistors. In this study, we fabricated and analyzed a novel graphene-based transistor, which resembles the structure of the barristor but uses a different operating condition. This new device, termed graphene adjustable-barriers transistor (GABT), utilizes a semiconductor-based gate rather than a metal−insulator gate structure to modulate the device currents. The key feature of the device is the two graphene-semiconductor Schottky barriers with different heights that are controlled simultaneously by the gate voltage. Due to the asymmetry of the barriers, the drain current exceeds the gate current by several orders of magnitude. Thus, the GABT can be considered an amplifier with an alterable current gain. In this work, a silicon−graphene−germanium GABT with an ultra-high current gain (ID/IG up to 8 × 106) was fabricated, and the device functionality was demonstrated. Additionally, a capacitance model is applied to predict the theoretical device performance resulting in an on−off ratio above 106, a swing of 87 mV/dec, and a drivecurrent of about 1 × 106 A/cm2. KW - Graphene KW - Transistor Y1 - 2022 U6 - https://doi.org/10.1021/acsami.2c10634 SN - 1944-8244 SN - 1944-8252 VL - 14 IS - 34 SP - 39249 EP - 39254 ER - TY - GEN A1 - Deindl, Christian A1 - Diehl, Katharina A1 - Spallek, Jacob A1 - Richter, Matthias A1 - Schüttig, Wiebke A1 - Rattay, Petra A1 - Dragano, Nico A1 - Pischke, Claudia R. T1 - Self-rated health of university students in Germany-The importance of material, psychosocial, and behavioral factors and the parental socio-economic status T2 - Frontiers in Public Health N2 - Health inequalities start early in life. The time of young adulthood, between late teens and early twenties, is especially interesting in this regard. This time of emerging adulthood, the transition from being a child to becoming an adult, is characterised by the detachment from parents and establishing of an own independent life. From a health inequality perspective, the question about the importance of the socio-economic background of parents is important. University students are an especially interesting group. Many students come from a privileged background and the question of health inequality among university students has not yet been properly studied. Based on the National Educational Panel Study (NEPS), we analysed health inequalities among 9,000 students in Germany (Ø 20 years in the first year of their studies) over a period of eight years. We found that university students in Germany report a good and very good health. Yet, we still found substantial health inequalities. Students whose parents had a higher occupational status also reported less health problems. We were also able to tie health inequality on health behaviour, psychosocial resources, and material conditions. KW - Students KW - Health KW - University KW - Inequality KW - National Educational Panel Study Y1 - 2023 UR - https://www.frontiersin.org/articles/10.3389/fpubh.2023.1075142/full U6 - https://doi.org/10.3389/fpubh.2023.1075142 SN - 2296-2565 VL - 11 ER - TY - GEN A1 - Eisenhauer, Nico A1 - Frank, Karin A1 - Weigelt, Alexandra A1 - Bartkowski, Bartosz A1 - Beugnon, Rémy A1 - Liebal, Katja A1 - Mahecha, Miguel A1 - Quaas, Martin A1 - Al‐Halbouni, Djamil A1 - Bastos, Ana A1 - Bohn, Friedrich J. A1 - Brito, Mariana Madruga de A1 - Denzler, Joachim A1 - Feilhauer, Hannes A1 - Fischer, Rico A1 - Fritsche, Immo A1 - Guimaraes‐Steinicke, Claudia A1 - Hänsel, Martin A1 - Haun, Daniel B. M. A1 - Herrmann, Hartmut A1 - Huth, Andreas A1 - Kalesse‐Los, Heike A1 - Koetter, Michael A1 - Kolleck, Nina A1 - Krause, Melanie A1 - Kretschmer, Marlene A1 - Leitão, Pedro J. A1 - Masson, Torsten A1 - Mora, Karin A1 - Müller, Birgit A1 - Peng, Jian A1 - Pöhlker, Mira L. A1 - Ratzke, Leonie A1 - Reichstein, Markus A1 - Richter, Solveig A1 - Rüger, Nadja A1 - Sánchez‐Parra, Beatriz A1 - Shadaydeh, Maha A1 - Sippel, Sebastian A1 - Tegen, Ina A1 - Thrän, Daniela A1 - Umlauft, Josefine A1 - Wendisch, Manfred A1 - Wolf, Kevin A1 - Wirth, Christian A1 - Zacher, Hannes A1 - Zaehle, Sönke A1 - Quaas, Johannes T1 - A belowground perspective on the nexus between biodiversity change, climate change, and human well‐being T2 - Journal of Sustainable Agriculture and Environment N2 - Soil is central to the complex interplay among biodiversity, climate, and society. This paper examines the interconnectedness of soil biodiversity, climate change, and societal impacts, emphasizing the urgent need for integrated solutions. Human‐induced biodiversity loss and climate change intensify environmental degradation, threatening human well‐being. Soils, rich in biodiversity and vital for ecosystem function regulation, are highly vulnerable to these pressures, affecting nutrient cycling, soil fertility, and resilience. Soil also crucially regulates climate, influencing energy, water cycles, and carbon storage. Yet, climate change poses significant challenges to soil health and carbon dynamics, amplifying global warming. Integrated approaches are essential, including sustainable land management, policy interventions, technological innovations, and societal engagement. Practices like agroforestry and organic farming improve soil health and mitigate climate impacts. Effective policies and governance are crucial for promoting sustainable practices and soil conservation. Recent technologies aid in monitoring soil biodiversity and implementing sustainable land management. Societal engagement, through education and collective action, is vital for environmental stewardship. By prioritizing interdisciplinary research and addressing key frontiers, scientists can advance understanding of the soil biodiversity–climate change–society nexus, informing strategies for environmental sustainability and social equity. Y1 - 2024 U6 - https://doi.org/10.1002/sae2.12108 SN - 2767-035X VL - 3 IS - 2 PB - Wiley ER - TY - GEN A1 - Kraljevski, Ivan A1 - Duckhorn, Frank A1 - Ju, Yong Chul A1 - Tschöpe, Constanze A1 - Richter, Christian A1 - Wolff, Matthias T1 - Acoustic Resonance Recognition of Coins T2 - 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 25-28 May 2020, Dubrovnik, Croatia N2 - In this study, we compare different machine learning approaches applied to acoustic resonance recognition of coins. Euro-cents and Euro-coins were classified by the sound emerging when throwing the coins onto a hard surface.The used dataset is a representative example of a small data which was collected in carefully prepared experiments.Due to the small number of coin specimens and the count of the collected observations, it was interesting to see whether deep learning methods can achieve similarly or maybe even better classification performances compared with more traditional methods.The results of the multi-class prediction of coin denominations are presented and compared in terms of balanced accuracy and Matthews Correlation Coefficient metrics. The feature analysis methods combined with the employed classifiers achieved acceptable results, despite the relatively small dataset. Y1 - 2020 SN - 978-1-7281-4460-3 SN - 978-1-7281-4461-0 U6 - https://doi.org/10.1109/I2MTC43012.2020.9129256 PB - IEEE Xplore ER - TY - CHAP A1 - Tschöpe, Constanze A1 - Duckhorn, Frank A1 - Richter, Christian A1 - Blüthgen, Peter A1 - Wolff, Matthias T1 - Intelligent Signal Processing on a Miniaturized Hardware Module T2 - IEEE SENSORS Proceedings, Glasgow, Scotland, UK, Oct. 29 - Nov. 1, 2017 Y1 - 2017 UR - http://ieeexplore.ieee.org/document/8234023/ SN - 978-1-5090-1012-7 U6 - https://doi.org/10.1109/ICSENS.2017.8234023 N1 - IEEE Catalog Numer: CFP17SEN-ART PB - IEEE CY - Piscataway, NJ ER - TY - CHAP A1 - Tschöpe, Constanze A1 - Duckhorn, Frank A1 - Richter, Christian A1 - Blüthgen, Peter A1 - Wolff, Matthias T1 - An embedded system for acoustic pattern recognition T2 - IEEE SENSORS Proceedings, Glasgow, Scotland, UK, Oct. 29 - Nov. 1, 2017 Y1 - 2017 SN - 978-1-5090-1012-7 U6 - https://doi.org/10.1109/ICSENS.2017.8234380 N1 - IEEE Catalog Numer: CFP17SEN-ART PB - IEEE CY - Piscataway, NJ ER -