TY - GEN A1 - Zobel, Arthur A1 - Fuhrer, Christopher A1 - Vogt, Damian A1 - Nakos, Alex A1 - Beirow, Bernd A1 - Blessing, Alexander A1 - Zippack, Carolin T1 - On the Influence of Bearing Modeling Details on the Dynamical System Effects of a Mid-Size Turbocharger Rotor T2 - Proceedings of ASME Turbo Expo 2023, Boston, Massachusetts, June 26-30, 2023, Volume 11, A. Aerodynamics excitation and damping, bearing and seal dynamics N2 - The investigation of the excitation of turbocharger rotors to quantify the High-Cycle-Fatigue (HCF) risk is still a demanding task nowadays. The common way to investigate such phenomena is to look either at the turbine or the compressor rotor in an isolated manner. This approach gives mostly reliable results, if the investigated excitation pattern is stemming from the up- or downstream parts in the machine. However, there is a lack of studies on the existence of responses, which may exist due to the coupling between compressor and turbine. With the increase of computational capabilities and the improvement of FE tools, it is possible to create a full rotor model featuring the compressor and the turbine wheel as well as the bearings to investigate the dynamical behavior of the full rotor at different resonances. To carry out such an investigation, both wheels and the shaft are modeled. The axial, as well as the radial bearings, are modelled realistically by suitable elements and values. Due to the asymmetry of damping and stiffness properties, the resulting system matrices are asymmetrical as well. The eigenfrequencies and mode shapes of such a system can be obtained in a reasonable time by carrying out a modal analysis using the QR damp eigensolver in Ansys APDL. The present paper will show the differences in dynamical system effects of a mid-size turbocharger with different shaft support conditions. For this purpose, the FE simulation with the full rotor and fixed support at the radial bearing position, which is comparable to the isolated rotor consideration, will be compared to the model featuring the detailed bearing modeling with stiffness and damping values originating from the OEM. Besides the detailed process of modeling the bearings, the mutual influence of both rotor wheels at certain eigenfrequencies is analyzed. This allows to conclude on the level of detailing needed to ensure that dynamical system effects are properly accounted. KW - Bearings KW - Dynamic Systems KW - Modeling KW - Rotors Y1 - 2023 SN - 978-0-7918-8705-9 U6 - https://doi.org/10.1115/GT2023-102098 PB - ASME CY - New York ER -