TY - GEN A1 - Kosto, Yuliia A1 - Tschammer, Rudi A1 - Morales, Carlos A1 - Henkel, Karsten A1 - Flege, Jan Ingo A1 - Ratzke, Markus A1 - Fischer, Inga Anita A1 - Costina, Ioan A1 - Alvarado Chavarin, Carlos A1 - Wenger, Christian T1 - Rational design and development of room temperature hydrogen sensors compatible with CMOS technology: a necessary step for the coming renewable hydrogen economy T2 - Proceedings of iCampus Conference Cottbus 2024 N2 - The transition towards a new, renewable energy system based on green energy vectors, such as hydrogen, requires not only direct energy conversion and storage systems, but also the development of auxiliary components, such as highly sensitive hydrogen gas sensors integrated into mass devices that operate at ambient conditions. Despite the recent advances in nanostructured metal oxide thin films in terms of simple fabrication processes and compatibility with integrated circuits, high sensitivity, and short response/recovery times usually require the use of expensive noble metals or elevated tem-peratures (>250 ºC), which results in high power consumption and poor long-term stability. This article presents the first steps of the work on developing a novel resistive hydrogen gas sensor based on ultrathin cerium oxide films, compatible with complementary metal oxide semiconductor technology and capable of operating at room temperature. Here, we show a multidisciplinary bottom-up approach combining different work areas for the sensor development, such as sensor architecture, sensing mechanism and deposition strategy of the active layer, electrical contact design depending on the desired electrical output, and fast testing under controlled environments. KW - gas sensors KW - micro-structering KW - atomic layer deposition KW - sensor platform Y1 - 2024 SN - 978-3-910600-00-3 U6 - https://doi.org/10.5162/iCCC2024/P21 SP - 182 EP - 185 PB - AMA Service GmbH CY - Wunstorf ER - TY - GEN A1 - Sanchez-Barquilla, Raquel A1 - Tschammer, Rudi A1 - Buß, Lars A1 - Morales, Carlos A1 - Flege, Jan Ingo T1 - The relation between substrate, Sm alloy, and surface sensitivity of ceria (111)- and (100)-oriented nano-islands on Ru(0001) and Cu(111) T2 - Verhandlungen der DPG N2 - Inverse oxide/metal catalysis allows achieving better catalytic performance than its traditional counterpart. For example, in cerium-based inverse catalyst systems, the Ce3+ states have been shown to be the active sites for methanol synthesis. This suggests that the activity can be enhanced by promoting those through alloying with trivalent, catalytically active rare-earth metals, as, e.g. Sm. We present low-energy and X-ray photoemission electron microscopy (LEEM/XPEEM), investigations that show how epitaxially grown (100)- and (111)-oriented CeO2 islands may be modified and/or alloyed by post-deposited metallic Sm. For the Ce1−xSmxO2−δ/Ru(0001) system, the CeO2 (111)-oriented islands undergo a structural change, concomitant with a partial conversion from Ce4+ to Ce3+. Surprisingly, for Ce1−xSmxO2−δ/Cu(111) the result is found to be face-dependent since only (100)-oriented CeOx islands were reduced whereas the (111)-oriented islands remained unaltered. Both systems have been exposed to reducing (H2) and oxidizing (CO2) conditions, resulting in higher reduction and in a complete recovery of the Ce4+ states, respectively. These unexpected results indicate a complex interaction not only between cerium and the doping element, but also an intricate interplay with the metallic substrate. KW - ceria KW - low-energy electron microscopy (LEEM) KW - X-ray photoemission electron microscopy (XPEEM) KW - samarium KW - metal substrate influence on reduction KW - orientation Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/85/contribution/6 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Tschammer, Rudi A1 - Kosto, Yuliia A1 - Morales, Carlos A1 - Schmickler, Marcel A1 - Henkel, Karsten A1 - Devi, Anjana A1 - Flege, Jan Ingo T1 - Atomic layer deposition of cerium oxide monitored by operando ellipsometry and in-situ X-ray photoelectron spectroscopy T2 - Verhandlungen der DPG N2 - Atomic layer deposition (ALD) has been used extensively to grow homogeneous films with excellent coverage and atomic-scale thickness control for a variety of applications. However, remaining challenges include the investigation of novel precursor-oxidant combinations for low-temperature deposition as well as unraveling the complex interplay between substrate and coating for ultrathin films. In this work, we present a detailed investigation of ultrathin cerium oxide films grown using the novel Ce(dpdmg)3 precursor with H2O and O2. Following a surface science-based approach, we have combined operando spectroscopic ellipsometry and in-situ X-ray photoelectron spectroscopy to allow rapid process optimization and determination of the complex relation between oxide stoichiometry, film thickness and ALD growth parameters, revealing a distinct dependence of inital Ce3+ content on the film thickness and choice of oxidant. This offers the possibility of adjusting the oxide properties to application requirements e.g. in gas sensing by choosing a suitable precursor-oxidant combination. KW - Atomic layer deposition (ALD) KW - ceria KW - low-temperature deposition KW - operando spectroscopic ellipsometry KW - in-situ X-ray photoelectron spectroscopy KW - film thickness KW - oxidant choice KW - cerium oxidation state Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/49/contribution/4 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Gertig, Max A1 - Morales, Carlos A1 - Henkel, Karsten A1 - Flege, Jan Ingo T1 - In situ X-ray photoelectron spectroscopy study of atomic layer deposited ceria on SiO2: substrate influence on the reaction mechanism during the early stages of growth T2 - Verhandlungen der DPG N2 - Atomic layer deposition (ALD) is known to produce amorphous and defect-rich films in a layer-by-layer fashion, which can potentially give rise to unexpected material properties. In particular, ultrathin films (few monolayers) will show the highest complexity, as the substrate-material interaction will play a major role during deposition. Therefore, it is crucial to understand the early stages of growth of the ALD process to control and potentially tailor this interfacial interaction. Applying a surface science approach combined with complementary ex-situ characterization, we have studied by in-situ X-ray photoelectron spectroscopy (XPS) the early stages of ceria (CeOx) growth on SiO2 substrates deposited by thermal-ALD using Ce(thd)4/O3. Interestingly, an initial mixture of Ce3+ and Ce4+ was observed, although only Ce4+ may be expected considering the used precursor and oxidant. This fact, together with a deviation from the ideal layer-by-layer growth and a higher growth rate during the first cycles, indicates a significant influence of the substrate of the ALD reaction mechanism as well as a correlation between morphology and ceria oxidation state. KW - Atomic layer deposition (ALD) KW - X-ray photoelectron spectroscopy (XPS) KW - in-situ KW - ceria Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/67/contribution/7 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Guttmann, Dominic A1 - Riedel, Björn A1 - Sánchez-Barquilla, Raquel A1 - Morales, Carlos A1 - Flege, Jan Ingo T1 - Oxide formation and oxide/metal interaction in CeOx/Ni(111) T2 - Verhandlungen der DPG N2 - Ni/ceria catalysts exhibit a high activity for methane to methanol conversion, making them very promising for applications within a sustainable economy. Possibly, their activity may be strongly enhanced due to the facile exchange between Ce4+ and Ce3+ states, with the latter likely responsible for activating O-H and C-H bonds. Here, we aim to unravel the complex metal-oxide interactions in the inverse CeOx/Ni(111) system under oxidizing and reducing environments. Using low-energy electron diffraction (LEED) we find that the CeOx(111) grown by reactive molecular beam epitaxy preferentially aligns with the main directions of the Ni(111) substrate or is azimuthally rotated by ±10°. By using X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS), we find that less NiO is formed during deposition of CeOx than when it is held without ceria at the same conditions (O2 partial pressure and temperature). Finally, we observe a complex behavior of the cerium and nickel oxidation states when exposing the system to O2 or H2 atmospheres. KW - Low-energy electron diffraction (LEED) KW - ceria KW - X-ray photoelectron spectroscopy (XPS) KW - ultraviolet photoelectron spectroscopy (UPS) KW - oxidation states Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/33/contribution/10 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Kosto, Yuliia A1 - Kapuscik, Paulina A1 - Tschammer, Rudi A1 - Guttmann, Dominic A1 - Mankowska, Ewa A1 - Matvija, Peter A1 - Morales, Carlos A1 - Mazur, Michał A1 - Henkel, Karsten A1 - Matolinova, Iva A1 - Domaradzki, Jarosław A1 - Flege, Jan Ingo T1 - Bare and Pd-doped ceria thin films prepared by ALD and EBE for hydrogen detection T2 - Verhandlungen der DPG N2 - The need to store and use hydrogen safely as part of green economy based on renewable energy evokes a necessity to reliably detect it at ambient conditions. The majority of currently used sensors are working at elevated temperatures (200-500 °C). In this work, we demonstrate that ceria films deposited on a commercial electrode by atomic layer deposition (ALD) and electron beam evaporation (EBE) electrically respond to hydrogen (from 20 to 500 ppm) at much lower temperatures (50-200 °C). The results reveal that <1.5 nm thin Pd adlayer increases the electrical response by several orders of magnitude for both ceria films. The NAP-XPS study under changing oxidative/reductive atmospheres sheds light on the mechanism of Pd-CeOx thermal activation and the role of the deposition technique in the reactivity of the oxide. KW - Hydrogen sensor KW - Atomic layer deposition (ALD) KW - ceria KW - Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/59/contribution/5 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Morales, Carlos A1 - Kosto, Yuliia A1 - Tschammer, Rudi A1 - Henkel, Karsten A1 - Flege, Jan Ingo T1 - Unraveling the effects of substrate interaction on the chemical properties of atomic layer deposited ultra-thin ceria layers T2 - Verhandlungen der DPG N2 - Atomic layer deposition (ALD) is well known to lead to amorphous and defective, non-stoichiometric films, potentially resulting in modified material properties that can also be affected by film/substrate interaction in the case of ultra-thin growths. For example, the formation, diffusion, and recovery of oxygen vacancies can be favored in disordered, reducible metal oxides compared to more ordered deposits, whereas interdiffusion processes can critically affect the film/substrate interface region. These effects have extensively been studied for thin thermal-ALD ceria films (below 15 nm) by combining in-situ and ex-situ characterization techniques in our lab and at synchrotron radiation facilities. While using alumina or silica substrates modifies the initial growth rate, Ce3+/Ce4+ ratio, and ceria morphology, the formation of different species at the interface affects its reactivity. Interestingly, the experiments have shown high reducibility of ALD-ceria ultrathin films on silica for very low hydrogen concentrations, even at room temperature, whereas for alumina substrates the formation of aluminates at the interface prevents further oxidation. Moreover, the comparison with more ordered films indicates a key role of the defective structure of ALD films in Ce3+/Ce4+ conversion. KW - Atomic layer deposition (ALD) KW - ceria KW - interface reaction KW - morphology KW - reducibility KW - hydrogen detection Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/49/contribution/8 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Kapuścik, Paulina A1 - Wojcieszak, Damian A1 - Pokora, Patrycja A1 - Mańkowska, Ewa A1 - Domaradzki, Jarosław A1 - Mazur, Michał A1 - Mazur, Piotr A1 - Kosto, Yuliia A1 - Morales, Carlos A1 - Kot, Małgorzata A1 - Flege, Jan Ingo T1 - Low temperature hydrogen sensor with high sensitivity based on CeOx thin film T2 - Sensors and Actuators B: Chemical N2 - In this work, a 500 nm-thick cerium oxide thin film was prepared by electron beam evaporation. It was found that the deposition of 7 nm thick Pd catalyst was required for obtaining a sensor response to hydrogen. The Pd/CeOx sensing structure has a high response of 5000 towards 25 ppm H2 at a working temperature of 200 °C and exhibits a sensor response of 1.3 at temperatures near ambient. Furthermore, the sensing structure exhibited excellent response/recovery kinetics. The results confirm that the CeOx-based materials are a promising material for the fabrication of room-temperature hydrogen sensors. KW - Cerium oxide KW - Thin film KW - Hydrogen sensing KW - Low operating temperature Y1 - 2024 U6 - https://doi.org/10.1016/j.snb.2024.136148 SN - 0925-4005 VL - 417 PB - Elsevier BV ER - TY - GEN A1 - Hernández-Gómez, Cayetano A1 - Prieto, Pilar A1 - Morales, Carlos A1 - Serrano, Aida A1 - Flege, Jan Ingo A1 - Méndez, Javier A1 - García-Pérez, Julia A1 - Granados, Daniel A1 - Soriano, Leonardo T1 - Structural defects on graphene generated by deposition of CoO: effect of electronic coupling of graphene T2 - Materials N2 - Understanding the interactions in hybrid systems based on graphene and functional oxides is crucial to the applicability of graphene in real devices. Here, we present a study of the structural defects occurring on graphene during the early stages of the growth of CoO, tailored by the electronic coupling between graphene and the substrate in which it is supported: as received pristine graphene on polycrystalline copper (coupled), cleaned in ultra-high vacuum conditions to remove oxygen contamination, and graphene transferred to SiO2/Si substrates (decoupled). The CoO growth was performed at room temperature by thermal evaporation of metallic Co under a molecular oxygen atmosphere, and the early stages of the growth were investigated. On the decoupled G/SiO2/Si samples, with an initial low crystalline quality of graphene, the formation of a CoO wetting layer is observed, identifying the Stranski-Krastanov growth mode. In contrast, on coupled G/Cu samples, the Volmer-Weber growth mechanism is observed. In both sets of samples, the oxidation of graphene is low during the early stages of growth, increasing for the larger coverages. Furthermore, structural defects are developed in the graphene lattice on both substrates during the growth of CoO, which is significantly higher on decoupled G/SiO2/Si samples mainly for higher CoO coverages. When approaching the full coverage on both substrates, the CoO islands coalesce to form a continuous CoO layer with strip-like structures with diameters ranging between 70 and 150 nm. KW - graphene KW - CoO KW - structural defects KW - X-ray photoelectronic spectroscopy KW - confocal Raman microscopy Y1 - 2024 U6 - https://doi.org/10.3390/ma17133293 SN - 1996-1944 VL - 17 IS - 13 PB - MDPI AG CY - Basel ER - TY - GEN A1 - Morales, Carlos A1 - Plate, Paul A1 - Marth, Ludwig A1 - Naumann, Franziska A1 - Kot, Małgorzata A1 - Janowitz, Christoph A1 - Kus, Peter A1 - Zöllner, Marvin Hartwig A1 - Wenger, Christian A1 - Henkel, Karsten A1 - Flege, Jan Ingo T1 - Bottom-up design of a supercycle recipe for atomic layer deposition of tunable Indium Gallium Zinc Oxide thin films T2 - ACS Applied Electronic Materials N2 - We present a successful bottom-up approach to design a generic plasma-enhanced atomic layer deposition (PEALD) supercycle recipe to grow high-quality indium gallium zinc oxide (IGZO) thin films with tunable composition at a relatively low temperature of 150 °C. In situ real-time ellipsometric characterization in combination with ex situ complementary techniques has been used to optimize the deposition process and quality of the films by identifying and solving growth challenges such as degree of oxidation, nucleation delays, or elemental composition. The developed supercycle approach enables facile control of the target composition by adapting the subcycle ratios within the supercycle process. Compared to other low-temperature deposition techniques resulting in amorphous films, our PEALD–IGZO process at 150 °C results in nearly amorphous, nanocrystalline films. The preparation of IGZO films at low temperature by a supercycle PEALD approach allows controlling the thickness, composition, and electrical properties while preventing thermally induced segregation. KW - IGZO KW - PEALD KW - supercycle KW - XPS depth profiling KW - current density Y1 - 2024 U6 - https://doi.org/10.1021/acsaelm.4c00730 SN - 2637-6113 VL - 6 IS - 8 SP - 5694 EP - 5704 PB - American Chemical Society (ACS) ER -