TY - GEN A1 - Göttmann, Alexander A1 - Mertin, Chris A1 - Mosecker, Linda A1 - Naumov, Andreas A1 - Bambach, Markus T1 - Properties of Friction Stir Welded Blanks Made from DC04 Mild Steel and Aluminum AA6016 T2 - Advanced Materials Research Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/AMR.769.237 SN - 1662-8985 SN - 1022-6680 VL - 769 SP - 237 EP - 244 ER - TY - GEN A1 - Henke, Thomas A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Quantification of uncertainties in grain size predictions of a microstructure-based flow stress model and application to gear wheel forging T2 - CIRP Annals - Manufacturing Technology Y1 - 2013 U6 - https://doi.org/10.1016/j.cirp.2013.03.121 SN - 0007-8506 SN - 1726-0604 VL - 62 IS - 1 SP - 287 EP - 290 ER - TY - GEN A1 - Vladimirov, Ivaylo N. A1 - Bambach, Markus A1 - Herty, Michael A1 - Bücker, H. Martin T1 - Identification of optimal material models and parameters in finite strain plasticity T2 - Proceedings in applied mathematics and mechanics : PAMM Y1 - 2013 U6 - https://doi.org/10.1002/pamm.201310163 SN - 1617-7061 VL - 13 IS - 1 SP - 335 EP - 336 ER - TY - GEN A1 - Bambach, Markus A1 - Grzibovskis, Richards T1 - Analysis of optimal metal flow in incremental sheet forming T2 - Proceedings in applied mathematics and mechanics : PAMM Y1 - 2013 U6 - https://doi.org/10.1002/pamm.201310161 VL - 13 IS - 1 SP - 331 EP - 332 ER - TY - GEN A1 - Bambach, Markus T1 - Conditions for Consistent Implementation of Flow Stress Models Incorporating Dynamic Recrystallization into Finite Element Simulation Codes T2 - Materials Science Forum Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/MSF.762.325 SN - 1662-9752 SN - 0255-5476 VL - 762 SP - 325 EP - 330 ER - TY - GEN A1 - Lohmar, Johannes A1 - Bambach, Markus T1 - Influence of Different Interpolation Techniques on the Determination of the Critical Conditions for the Onset of Dynamic Recrystallisation T2 - Materials Science Forum Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/MSF.762.331 SN - 1662-9752 SN - 0255-5476 VL - 762 SP - 331 EP - 336 ER - TY - CHAP A1 - Seuren, Simon A1 - Willkomm, Johannes A1 - Bücker, Hans A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Sensitivity Analysis of a Force and Microstructure Model for Plate Rolling T2 - Metal Forming 2012, proceedings of the 14th International Conference on Metal forming, September 16 - 19, 2012, Krakow, Poland Y1 - 2012 SN - 978-3-514-00797-0 SP - 91 EP - 94 PB - Wiley-VCH CY - Weinheim ER - TY - CHAP A1 - Bambach, Markus A1 - Seuren, Simon A1 - Henke, Thomas A1 - Heppner, Stephan A1 - Xiong, Wei A1 - Hirt, Gerhard T1 - Konzepte zur integrierten Modellierung von Gefüge- und Fließspannungsentwicklung in der Simulation von Warmumformprozessen T2 - Tagungsband, 13. RoundTable Simulation in der Umformtechnik, 23. bis 26. April 2012, Bamberg Y1 - 2012 SN - 978-3-9813814-1-2 SP - 117 EP - 139 PB - Simufact Engineering GmbH CY - Hamburg ER - TY - GEN A1 - Bambach, Markus T1 - Recent trends in metal forming: From process simulation and microstructure control in classical forming processes to hybrid combinations between forming and additive manufacturing T2 - Journal of Machine Engineering Y1 - 2016 SN - 1895-7595 VL - 16 IS - 2 SP - 5 EP - 17 ER - TY - GEN A1 - Mertin, Chris A1 - Mosecker, Linda A1 - Naumov, Andreas A1 - Göttmann, Alexander A1 - Bambach, Markus T1 - Analysis of friction stir welded blanks made from DC04 mild steel and aluminium AA6016 T2 - 20. Sächsische Fachtagung Umformtechnik, Tagungsband, Dresden, 27. - 28. November 2013 Y1 - 2013 PB - Technische Universität CY - Dresden ER - TY - CHAP A1 - Göttmann, Alexander A1 - Korinth, Marcus Christopher A1 - Schäfer, V. A1 - Taleb-Araghi, Babak A1 - Bambach, Markus A1 - Hirt, Gerhard ED - Schuh, Günther ED - Neugebauer, Reimund ED - Uhlmann, Eckart T1 - Manufacturing of Individualized Cranial Implants Using Two Point Incremental Sheet Metal Forming T2 - Future Trends in Production Engineering, Proceedings of the First Conference of the German Academic Society for Production Engineering (WGP), Berlin, Germany, 8th-9th June 2011 Y1 - 2013 SN - 978-3-642-24490-2 U6 - https://doi.org/10.1007/978-3-642-24491-9_28 SP - 287 EP - 295 PB - Springer CY - Berlin [u.a.] ER - TY - CHAP A1 - Hirt, Gerhard A1 - Bambach, Markus A1 - Seuren, Simon A1 - Henke, Thomas T1 - Current aspects of modelling in hot rolling T2 - Conference papers, 4th International Conference on Thermomechanical Processing of Steels : 10 - 12 September 2012, Sheffield, UK Y1 - 2012 SP - 36 EP - 38 PB - IOM Communications CY - London ER - TY - CHAP A1 - Seuren, Simon A1 - Romans, T. A1 - Recker, D. A1 - Rosenstock, D. A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Void closure in heavy ingots – a comparison of rolling and open die forging T2 - Proceedings, ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging, 3 - 7 June 2012, Aachen, Germany, Eurogress Y1 - 2012 N1 - DVD-ROM SP - 1 EP - 5 CY - Aachen ER - TY - CHAP A1 - Heppner, Stephan A1 - Bambach, Markus A1 - Karhausen, Kai-Friedrich T1 - Identification of Parameters in Physically Based Material Models T2 - Metal Forming 2012, proceedings of the 14th International Conference on Metal forming, September 16 - 19, 2012, Krakow, Poland Y1 - 2012 SN - 978-3-514-00797-0 SP - 955 EP - 958 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Bolz, Sebastian A1 - Weiß, Sabine T1 - Devising Strain Hardening Models Using Kocks-Mecking Plots - A Comparison of Model Development for Titanium Aluminides and Case Hardening Steel T2 - Metals KW - titanium aluminides alloy KW - single phase steel KW - hot forming Y1 - 2016 U6 - https://doi.org/10.3390/met6090204 SN - 2075-4701 VL - 6 IS - 9 SP - 204 ER - TY - CHAP A1 - Seidlitz, Holger A1 - Bambach, Markus A1 - Fritzsche, Sebastian A1 - Gerstenberger, Colin T1 - High load‐bearing multi‐material‐joints for metal sheets and composites by incremental in‐situ forming processes T2 - ESAFORM 2016, proceedings of the 19th International ESAFORM Conference on Material Forming, conference date: 27-29 April 2016, Nantes, France Y1 - 2016 SN - 978-0-7354-1427-3 U6 - https://doi.org/10.1063/1.4963464 PB - AIP Publishing CY - Melville, NY ER - TY - CHAP A1 - Maqbool, Fawad A1 - Elze, Lars A1 - Seidlitz, Holger A1 - Bambach, Markus T1 - Comparison of Manufacturing of Lightweight Corrugated Sheet Sandwiches by Hydroforming and Incremental Sheet Forming T2 - ESAFORM 2016, proceedings of the 19th International ESAFORM Conference on Material Forming, conference date: 27-29 April 2016, Nantes, France Y1 - 2016 SN - 978-0-7354-1427-3 U6 - https://doi.org/10.1063/1.4963456 PB - AIP Publishing CY - Melville, NY ER - TY - GEN A1 - Bambach, Markus A1 - Häck, Axel-Stefan A1 - Herty, Michael T1 - Modeling steel rolling processes by fluid-like differential equations T2 - Applied Mathematical Modelling Y1 - 2017 U6 - https://doi.org/10.1016/j.apm.2016.10.056 VL - 43 SP - 155 EP - 168 ER - TY - CHAP A1 - Hojda, Stephan A1 - Bambach, Markus ED - Schmitz, Georg ED - Prahl, Ulrich T1 - Forming Processes T2 - Handbook of Software Solutions for ICME Y1 - 2016 SN - 978-3-527-33902-0 SP - 81 EP - 95 PB - Wiley-VCH Verlag CY - Weinheim ER - TY - RPRT A1 - Bambach, Markus A1 - Sviridov, Alexander A1 - Behrens, Bernd-Arno A1 - Almohallami, Amer T1 - Prozessoptimierung des Fügens durch Knickbauchen mittels lokaler Halbwarmumformung KW - Umformfügen KW - mechanisches Fügen KW - Rohre Y1 - 2016 SN - 978-3-86776-497-1 PB - Verlag der Europäischen Forschungsgesellschaft CY - Hannover ER - TY - GEN A1 - Sviridov, Alexander A1 - Grützner, Philip A1 - Rusch, Michael A1 - Bambach, Markus T1 - Joining by upset bulging - Tooling design and new concepts for online process control using servo presses and local heating T2 - Journal of Machine Engineering KW - tube forming KW - mechanical joining KW - servo press KW - upset bulging KW - local heating Y1 - 2017 SN - 1895-7595 SN - 1642-6568 VL - 17 IS - 1 SP - 78 EP - 87 ER - TY - CHAP A1 - Bambach, Markus A1 - Imran, Muhammad A1 - Buhl, Johannes A1 - Härtel, Sebastian A1 - Awiszus, Birgit ED - Szeliga, Danuta ED - Rauch, Łukasz T1 - Towards intelligent materials testing with reduced experimental effort for hot forming T2 - KomPlasTech 2017 : XXIV International Conference on Computer Methods in Materials Technology, January 15-18, 2017, Zakopane, Poland : book of abstracts KW - Intelligent materials testing KW - Hot working Y1 - 2017 SN - 978-83-947091-0-5 SP - 72 EP - 73 PB - AKNET-PRess CY - Krakow ER - TY - CHAP A1 - Sizova, Irina A1 - Sviridov, Alexander A1 - Günther, Martin A1 - Bambach, Markus ED - Szeliga, Danuta ED - Rauch, Łukasz T1 - Finite element modelling of titanium aluminides T2 - KomPlasTech 2017 : XXIV International Conference on Computer Methods in Materials Technology, January 15-18, 2017, Zakopane, Poland : book of abstracts KW - Titanium aluminide alloy KW - Hot forming KW - Flow stress Y1 - 2017 SN - 978-83-947091-0-5 SP - 46 EP - 47 PB - AKNET-PRess CY - Krakow ER - TY - GEN A1 - La Batut, Benoit de A1 - Fergani, Omar A1 - Brotan, Vegard A1 - Bambach, Markus A1 - El Mansouri, Mohamed T1 - Analytical and Numerical Temperature Prediction in Direct Metal Deposition of Ti6Al4V T2 - Journal of Manufacturing and Materials Processing Y1 - 2017 U6 - https://doi.org/10.3390/jmmp1010003 SN - 2504-4494 VL - 1 IS - 1 SP - 3 ER -