TY - GEN A1 - Maqbool, Fawad A1 - Hajavifard, Ramin A1 - Walther, Frank A1 - Bambach, Markus T1 - Engineering the residual stress state of the metastable austenitic stainless steel (MASS) disc springs by incremental sheet forming (ISF) T2 - Production Engineering Y1 - 2019 U6 - https://doi.org/10.1007/s11740-018-0864-6 SN - 0944-6524 SN - 1863-7353 VL - Vol. 13 IS - 2 SP - 139 EP - 148 ER - TY - GEN A1 - Besong, Lemopi Isidore A1 - Buhl, Johannes A1 - Bambach, Markus T1 - Investigations on hole-flanging by paddle forming and a comparison with single point incremental forming T2 - International Journal of Mechanical Sciences Y1 - 2019 U6 - https://doi.org/10.1016/j.ijmecsci.2019.105143 SN - 0020-7403 VL - vol. 164 ER - TY - GEN A1 - Eisentraut, Mark A1 - Bolz, Sebastian A1 - Sizova, Irina A1 - Bambach, Markus A1 - Weiß, Sabine T1 - Development of a heat treatment strategy for the γ-TiAl based alloy TNM-B1 to increase the hot workability T2 - SN Applied Sciences Y1 - 2019 U6 - https://doi.org/10.1007/s42452-019-1563-4 SN - 2523-3963 SN - 2523-3971 VL - 1 IS - 11 ER - TY - GEN A1 - Stendal, Johan Andreas A1 - Eisentraut, Mark A1 - Sizova, Irina A1 - Bolz, Sebastian A1 - Bambach, Markus A1 - Weiß, Sabine T1 - Effect of heat treatment on the workability of hot isostatically pressed TNM-B1 T2 - AIP Conference Proceedings Y1 - 2019 SN - 978-0-7354-1847-9 U6 - https://doi.org/10.1063/1.5112544 VL - 2113 IS - 1 ER - TY - GEN A1 - Imran, Muhammad A1 - Szyndler, Joanna A1 - Afzal, Muhammad Junaid A1 - Bambach, Markus T1 - Towards the damage evolution for hot forming processes using Gurson-Tvergaard Needleman model – Coupled to dynamic recrystallization T2 - AIP Conference Proceedings Y1 - 2019 SN - 978-0-7354-1847-9 U6 - https://doi.org/10.1063/1.5112741 VL - 2113 IS - 1 ER - TY - GEN A1 - Maqbool, Fawad A1 - Bambach, Markus T1 - Experimental and Numerical Investigation of the Influence of Process Parameters in Incremental Sheet Metal Forming on Residual Stresses T2 - Journal of Manufacturing and Materials Processing Y1 - 2019 U6 - https://doi.org/10.3390/jmmp3020031 SN - 2504-4494 VL - 3 IS - 2 ER - TY - GEN A1 - Emdadi, Aliakbar A1 - Sizova, Irina A1 - Bambach, Markus A1 - Hecht, Ulrike T1 - Hot deformation behavior of a spark plasma sintered Fe-25Al-1.5Ta alloy with strengthening Laves phase T2 - Intermetallics Y1 - 2019 U6 - https://doi.org/10.1016/J.intermet.2019.03.017 SN - 0966-9795 VL - Vol. 109 SP - 123 EP - 134 ER - TY - GEN A1 - Buhl, Johannes A1 - Israr, Rameez A1 - Bambach, Markus T1 - Modeling and convergence analysis of directed energy deposition simulations with hybrid implicit / explicit and implicit solutions T2 - Journal of Machine Engineering Y1 - 2019 U6 - https://doi.org/10.5604/01.3001.0013.4086 SN - 2391-8071 SN - 1895-7595 VL - Vol. 19 IS - 3 SP - 94 EP - 107 ER - TY - GEN A1 - Fügenschuh, Armin A1 - Buhl, Johannes A1 - Bambach, Markus ED - Fortz, Bernard ED - Labbé, Martine T1 - Trajectory Optimization for Wire-Arc Additive Manufacturing T2 - Operations Research Proceedings 2018 ; selected papers of the Annual International Conference of the German Operations Research Society (GOR), Brussels, Belgium, September 12-14, 2018 Y1 - 2019 SN - 978-3-030-18499-5 SN - 978-3-030-18500-8 U6 - https://doi.org/10.1007/978-3-030-18500-8 SP - 331 EP - 337 PB - Springer CY - Cham ER - TY - GEN A1 - Besong, Lemopi Isidore A1 - Buhl, Johannes A1 - Bambach, Markus T1 - Paddle shape optimization for hole-flanging by paddle forming through the use of a predefined strain path in finite element analysis T2 - Journal of Machine Engineering Y1 - 2019 U6 - https://doi.org/10.5604/01.3001.0013.2226 SN - 1895-7595 SN - 2391-8071 VL - Vol. 19 IS - 2 SP - 83 EP - 98 ER - TY - GEN A1 - Hajavifard, Ramin A1 - Maqbool, Fawad A1 - Schmiedt-Kalenborn, Anke A1 - Buhl, Johannes A1 - Bambach, Markus T1 - Integrated Forming and Surface Engineering of Disc Springs by Inducing Residual Stresses by Incremental Sheet Forming T2 - Materials Y1 - 2019 U6 - https://doi.org/10.3390/ma12101646 SN - 1996-1944 VL - 12 IS - 10 ER - TY - GEN A1 - Maqbool, Fawad A1 - Hajavifard, Ramin A1 - Walther, Frank A1 - Bambach, Markus T1 - Experimental investigation and finite element modelling of residual stress control in disc springs made of metastable austenitic stainless steel (MASS) using incremental sheet forming (ISF) T2 - Procedia Manufacturing Y1 - 2019 U6 - https://doi.org/10.1016/j.promfg.2019.02.099 SN - 2351-9789 VL - Vol. 29 SP - 12 EP - 20 ER - TY - GEN A1 - Bambach, Markus A1 - Herty, Michael T1 - Model Predictive Control of the Punch Speed for Damage Reduction in Isothermal Hot Forming T2 - Materials Science Forum Y1 - 2019 U6 - https://doi.org/10.4028/www.scientific.net/MSF.949.1 VL - 949 ER - TY - GEN A1 - Silze, Frank A1 - Schnick, Michael A1 - Sizova, Irina A1 - Bambach, Markus T1 - Laser Metal Deposition of Ti-6Al-4V with a Direct Diode Laser Set-up and Coaxial Material Feed T2 - Procedia Manufacturing Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.156 SN - 2351-9789 VL - 47 SP - 1154 EP - 1158 ER - TY - GEN A1 - Klöppel, Thomas A1 - Merten, Mathias A1 - Haufe, Andre A1 - Buhl, Johannes A1 - Bambach, Markus ED - Bambach, Markus T1 - On the Numerical Prediction of Process-Dependent Properties of Current High-Performance Materials with Material Model *MAT_254 in LS-DYNA T2 - Procedia Manufacturing : 23rd International Conference on Material Forming Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.341 SN - 2351-9789 VL - 47 SP - 1520 EP - 1525 ER - TY - GEN A1 - Nguyen, Lam A1 - Buhl, Johannes A1 - Bambach, Markus ED - Bambach, Markus T1 - Multi-bead Overlapping Models for Tool Path Generation in Wire-Arc Additive Manufacturing Processes T2 - Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.129 SN - 2351-9789 VL - 47 SP - 1123 EP - 1128 ER - TY - GEN A1 - Hama-Saleh, Rebar A1 - Weisheit, Andreas A1 - Schleifenbaum, Johannes Henrich A1 - Ünsal, Ismail A1 - Sviridov, Alexander A1 - Bambach, Markus ED - Bambach, Markus T1 - Formability Analysis of Micro-Alloyed Sheet Metals Reinforced by Additive Manufacturing T2 - Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.317 SN - 2351-9789 VL - 47 SP - 1023 EP - 1028 ER - TY - GEN A1 - Michl, Dennis A1 - Sydow, Benjamin A1 - Bambach, Markus ED - Bambach, Markus T1 - Ring Rolling of Pre-forms Made by Wire-arc Additive Manufacturing T2 - Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.275 SN - 2351-9789 VL - 47 SP - 342 EP - 348 ER - TY - GEN A1 - Meiners, Frank A1 - Ihne, Jörg A1 - Jürgens, Pascal A1 - Hemes, Susanne A1 - Mathes, Michael A1 - Sizova, Irina A1 - Bambach, Markus A1 - Hama-Saleh, Rebar A1 - Weisheit, Andreas ED - Bambach, Markus T1 - New Hybrid Manufacturing Routes Combining Forging and Additive Manufacturing to Efficiently Produce High Performance Components from Ti-6Al-4V T2 - Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.215 SN - 2351-9789 VL - 47 SP - 261 EP - 267 ER - TY - GEN A1 - Hart-Rawung, Thawin A1 - Buhl, Johannes A1 - Bambach, Markus ED - Bambach, Markus T1 - A Fast Approach for Optimization of Hot Stamping Based on Machine Learning of Phase Transformation Kinetics T2 - Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.218 SN - 2351-9789 VL - 47 SP - 707 EP - 712 ER - TY - GEN A1 - Mishurova, Tatjana A1 - Sydow, Benjamin A1 - Thiede, Tobias A1 - Sizova, Irina A1 - Ulbricht, Alexander A1 - Bambach, Markus A1 - Bruno, Giovanni T1 - Residual Stress and Microstructure of a Ti-6Al-4V Wire Arc Additive Manufacturing Hybrid Demonstrator T2 - Metals Y1 - 2020 U6 - https://doi.org/10.3390/met10060701 SN - 2075-4701 VL - 6 IS - 10 ER - TY - GEN A1 - Nguyen, Lam A1 - Buhl, Johannes A1 - Bambach, Markus T1 - Continuous Eulerian tool path strategies for wire-arc additive manufacturing of rib-web structures with machine-learning-based adaptive void filling T2 - Additive Manufacturing Y1 - 2020 U6 - https://doi.org/10.1016/j.addma.2020.101265 SN - 2214-8604 VL - Vol. 35 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Sydow, Benjamin A1 - Hemes, Susanne A1 - Meiners, Frank T1 - Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing T2 - Journal of Materials Processing Technology Y1 - 2020 U6 - https://doi.org/10.1016/j.jmatprotec.2020.116689 SN - 0924-0136 IS - Vol. 282 ER - TY - GEN A1 - Gagliardi, Francesco A1 - Ambrogio, Giuseppina A1 - Conte, Romina A1 - Bambach, Markus T1 - Extruded joining elements manufactured by friction stir forming: an investigation of the process parameters T2 - The International Journal of Advanced Manufacturing Technology Y1 - 2020 U6 - https://doi.org/10.1007/s00170-020-04992-w SN - 1433-3015 VL - 106 IS - 11-12 SP - 5559 EP - 5570 ER - TY - GEN A1 - Imran, Muhammad A1 - Afzal, Muhammad Junaid A1 - Buhl, Johannes A1 - Bambach, Markus A1 - Dunlap, Anthony A1 - Schwedt, Alexander A1 - Aretz, Anke A1 - Wang, Shuhan A1 - Lohmar, Johannes A1 - Hirt, Gerhard T1 - Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling T2 - Production Engineering Y1 - 2020 U6 - https://doi.org/10.1007/s11740-019-00932-0 SN - 1863-7353 SN - 0944-6524 VL - 14 IS - 1 SP - 5 EP - 16 ER -