TY - GEN A1 - Ünsal, Ismail A1 - Hirtler, Markus A1 - Sviridov, Alexander A1 - Bambach, Markus ED - Bambach, Markus T1 - Material Properties of Features Produced from EN AW 6016 by Wire-Arc Additive Manufacturing T2 - Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.131 SN - 2351-9789 VL - 47 SP - 1129 EP - 1133 ER - TY - GEN A1 - Hirtler, Markus A1 - Jedynak, Angelika A1 - Sydow, Benjamin A1 - Sviridov, Alexander A1 - Bambach, Markus ED - Bambach, Markus T1 - A Study On The Mechanical Properties Of Hybrid Parts Manufactured By Forging And Wire Arc Additive Manufacturing T2 - Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.136 SN - 2351-9789 VL - 47 SP - 1141 EP - 1148 ER - TY - GEN A1 - Hirtler, Markus A1 - Ünsal, Ismail A1 - Buhl, Johannes A1 - Bambach, Markus T1 - Investigation of quench hardening behavior of directed energy deposited 22MnB5 steel for local reinforcement of hot stamping parts T2 - CIRP Journal of Manufacturing Science and Technology KW - 22MnB5 KW - Directed Energy Deposition KW - Hardenability KW - Critical cooling rate KW - Dilatometry KW - Boron nitride KW - Mill scale Y1 - 2022 U6 - https://doi.org/10.1016/j.cirpj.2022.08.003 SN - 1878-0016 SN - 1755-5817 VL - Vol. 39 SP - 223 EP - 231 ER - TY - GEN A1 - Sizova, Irina A1 - Sviridov, Alexander A1 - Bambach, Markus T1 - Avoiding crack nucleation and propagation during upset bulging of tubes T2 - International Journal of Material Forming KW - Tube forming KW - Failure KW - Mechanical Joining KW - Finite Element Simulation Y1 - 2017 U6 - https://doi.org/10.1007/s12289-016-1292-9 SN - 1960-6214 VL - 10 IS - 3 SP - 443 EP - 451 ER - TY - CHAP A1 - Hirt, Gerhard A1 - Bambach, Markus A1 - Bleck, Wolfgang A1 - Prahl, Ulrich A1 - Stollenwerk, Jochen ED - Brecher, Christian T1 - The development of Incremental Sheet Forming from Flexible Forming to Fully Integrated Production of Sheet Metal Parts T2 - Advances in Production Technology Y1 - 2015 SN - 978-3-319-12303-5 SP - 117 EP - 129 PB - Springer-Verlag CY - Berlin ; Heidelberg ER - TY - GEN A1 - Teller, Marco A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - A compression-torsion-wear-test achieving contact pressures of up to eight times the initial flow stress of soft aluminium T2 - CIRP Annals - Manufacturing Technology Y1 - 2015 U6 - https://doi.org/10.1016/j.cirp.2015.04.086 SN - 0007-8506 VL - 64 IS - 1 SP - 289 EP - 292 ER - TY - GEN A1 - Bambach, Markus A1 - Heppner, Stephan A1 - Steinmetz, D. A1 - Roters, Franz T1 - Assessing and ensuring parameter identifiability for a physically-based strain hardening model for twinning-induced plasticity T2 - Mechanics of Materials Y1 - 2015 U6 - https://doi.org/10.1016/j.mechmat.2015.01.019 SN - 0167-6636 VL - 84 SP - 127 EP - 139 ER - TY - GEN A1 - Bambach, Markus A1 - Seuren, Simon T1 - On instabilities of force and grain size predictions in the simulation of multi-pass hot rolling processes T2 - Journal of Materials Processing Technology Y1 - 2015 U6 - https://doi.org/10.1016/j.jmatprotec.2014.07.018 SN - 0924-0136 VL - 216 SP - 95 EP - 113 ER - TY - GEN A1 - Güvenç, Onur A1 - Roters, Franz A1 - Hickel, Tilmann A1 - Bambach, Markus T1 - ICME for Crashworthiness of TWIP Steels: From Ab Initio to the Crash Performance T2 - JOM Y1 - 2015 U6 - https://doi.org/10.1007/s11837-014-1192-8 SN - 1047-4838 SN - 1543-1851 VL - 67 IS - 1 SP - 120 EP - 128 ER - TY - GEN A1 - Russig, Christoph A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - A New Tool Concept for Rotary Peen Forming with Defined Impact Positions T2 - Key Engineering Materials Y1 - 2012 U6 - https://doi.org/10.4028/www.scientific.net/KEM.504-506.925 SN - 1662-9795 VL - 504-506 SP - 925 EP - 930 ER - TY - CHAP A1 - Hirt, Gerhard A1 - Bambach, Markus A1 - Seuren, Simon A1 - Henke, Thomas A1 - Lohmar, Johannes ED - Shi-Hong Zhang, Xiang-Hua Liu ED - Ming Cheng, Juan Li T1 - Recent developments in modeling of hot rolling processes: part I - Fundamentals T2 - The 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013, Shenyang, China, 6-10 July 2013 Y1 - 2013 SN - 978-0-7354-1156-2 U6 - https://doi.org/10.1063/1.4806828 SP - 222 EP - 230 PB - AIP Publishing CY - Melville, New York ER - TY - CHAP A1 - Hirt, Gerhard A1 - Bambach, Markus A1 - Seuren, Simon A1 - Henke, Thomas A1 - Lohmar, Johannes ED - Shi-Hong Zhang, Xiang-Hua Liu ED - Ming Cheng, Juan Li T1 - Recent Developments in modeling of hot rolling processes: part II - Applications T2 - The 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013, Shenyang, China, 6 - 10 July 2013 Y1 - 2013 SN - 978-0-7354-1156-2 U6 - https://doi.org/10.1063/1.4806829 SP - 231 EP - 238 PB - AIP Publishing CY - Melville, New York ER - TY - CHAP A1 - Konovalov, Sergej A1 - Henke, Thomas A1 - Jansen, Ulrich A1 - Hardjosuwito, Ario A1 - Lohse, Wolfram A1 - Bambach, Markus A1 - Prahl, Ulrich ED - Schmitz, Georg J. ED - Prahl, Ulrich T1 - Test Case Gearing Component T2 - Integrative Computational Materials Engineering-Concepts and applications of a modular simulation platform Y1 - 2012 SN - 978-3-527-33081-2 SP - 187 EP - 218 PB - Wiley VCH CY - Weinheim ER - TY - CHAP A1 - Hirt, Gerhard A1 - Bleck, Wolfgang A1 - Bobzin, Kirsten A1 - Bührig-Polaczek, Andreas A1 - Bambach, Markus A1 - Brecher, Christian ED - Brecher, Christian T1 - Hybrid Production Systems T2 - Integrative Production Technology for High-Wage Countries Y1 - 2012 SN - 978-3-642-21066-2 N1 - und 50 weitere Verfasser SP - 435 EP - 696 PB - Springer Verlag CY - Berlin ; Heidelberg ER - TY - CHAP A1 - Bleck, Wolfgang A1 - Prahl, Ulrich A1 - Hirt, Gerhard A1 - Bambach, Markus ED - Brecher, Christian T1 - Designing New Forging Steels by ICMPE T2 - Advances in Production Technology Y1 - 2015 SN - 978-3-319-12304-2 SN - 978-3-319-12303-5 U6 - https://doi.org/10.1007/978-3-319-12304-2 SP - 85 EP - 98 PB - Springer Verlag CY - Berlin ; Heidelberg ER - TY - CHAP A1 - Hirt, Gerhard A1 - Bambach, Markus ED - Altan, Tailan ED - Tekkaya, A. Erman T1 - Incremental Sheet Forming - ISF T2 - Sheet Metal Forming: Processes and applications Y1 - 2012 SN - 978-1-61503-844-2 SP - 273 EP - 285 PB - ASM International CY - Materials Park, Ohio ER - TY - CHAP A1 - Bambach, Markus T1 - Fast Simulation of Asymmetric Incremental Sheet Metal Forming T2 - NUMISHEET 2014, Melbourne, Australia, 6 - 10 January, The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes Y1 - 2014 U6 - https://doi.org/10.1063/1.4850102 SP - 844 EP - 847 PB - AIP Publ. CY - Melville, NY ER - TY - GEN A1 - Bailly, David A1 - Bambach, Markus A1 - Hirt, Gerhard A1 - Pofahl, Thorsten A1 - Herkrath, Ralf A1 - Heyden, Hans A1 - Trautz, Martin T1 - Manufacturing of Innovative Self-supporting Sheet-metal Structures Representing Freeform Surfaces T2 - Procedia CIRP Y1 - 2014 U6 - https://doi.org/10.1016/j.procir.2014.06.106 SN - 2212-8271 VL - 18 SP - 51 EP - 56 ER - TY - GEN A1 - Stille, Sebastian A1 - Pöplau, Julia A1 - Beck, Tilmann A1 - Bambach, Markus A1 - Hirt, Gerhard A1 - Singheiser, Lorenz T1 - Very high cycle fatigue behavior of riblet structured Alclad 2024 thin sheets T2 - International Journal of Fatigue Y1 - 2014 U6 - https://doi.org/10.1016/j.ijfatigue.2014.01.023 SN - 0142-1123 VL - 63 SP - 183 EP - 190 ER - TY - GEN A1 - Bambach, Markus A1 - Pietryga, Michael P. A1 - Mikloweit, Alexander A1 - Hirt, Gerhard T1 - A finite element framework for the evolution of bond strength in joining-by-forming processes T2 - Journal of Materials Processing Technology Y1 - 2014 U6 - https://doi.org/10.1016/j.jmatprotec.2014.03.015 SN - 0924-0136 VL - 214 IS - 10 SP - 2156 EP - 2168 ER - TY - GEN A1 - Almohallami, Amer A1 - Rusch, Michael A1 - Vucetic, Milan A1 - Bouguecha, Anas A1 - Bambach, Markus A1 - Behrens, Bernd-Arno T1 - Joining by Upset Bulging at Elevated Temperatures T2 - Advanced Materials Research KW - Finite element method (FEM) Joining KW - Metal forming KW - Joining Y1 - 2016 U6 - https://doi.org/10.4028/www.scientific.net/AMR.1140.115 SN - 1662-8985 IS - 1140 SP - 115 EP - 122 ER - TY - GEN A1 - Bambach, Markus A1 - Bücker, H. Martin A1 - Heppner, Stephan A1 - Herty, Michael A1 - Vladimirov, Ivaylo N. T1 - Characteristics of testing conditions for constitutive models in metal plasticity T2 - Journal of Engineering Mathematics Y1 - 2014 U6 - https://doi.org/10.1007/s10665-013-9681-2 SN - 1573-2703 SN - 0022-0833 VL - 88 IS - 1 SP - 99 EP - 119 ER - TY - GEN A1 - Lohmar, Johannes A1 - Bambach, Markus A1 - Hirt, Gerhard A1 - Kiefer, Thomas A1 - Kotliba, Daniel T1 - The Precise Prediction of Rolling Forces in Heavy Plate Rolling Based on Inverse Modeling Techniques T2 - Steel Research International Y1 - 2014 U6 - https://doi.org/10.1002/srin.201300431 SN - 1869-344X VL - 85 IS - 11 SP - 1525 EP - 1532 ER - TY - GEN A1 - Güvenç, Onur A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Coupling of Crystal Plasticity Finite Element and Phase Field Methods for the Prediction of SRX Kinetics after Hot Working T2 - Steel Research International Y1 - 2014 U6 - https://doi.org/10.1002/srin.201300191 SN - 1869-344X VL - 85 IS - 6 SP - 999 EP - 1009 ER - TY - GEN A1 - Laschet, Gottfried A1 - Shukla, Mohit A1 - Henke, Thomas A1 - Fayek, Patrick A1 - Bambach, Markus A1 - Prahl, Ulrich T1 - Impact of the Microstructure on the U–O Forming Simulations of a Ferrite–Pearlite Pipeline Tube T2 - Steel Research International Y1 - 2014 U6 - https://doi.org/10.1002/srin.201300247 SN - 1869-344X VL - 85 IS - 6 SP - 1083 EP - 1098 ER - TY - GEN A1 - Voswinckel, Holger A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Improving geometrical accuracy for flanging by incremental sheet metal forming T2 - International Journal of Material Forming Y1 - 2014 U6 - https://doi.org/10.1007/s12289-014-1182-y SN - 1960-6206 SN - 1960-6214 VL - 8 IS - 3 SP - 391 EP - 399 ER - TY - GEN A1 - Mertin, Chris A1 - Naumov, Andreas A1 - Mosecker, Linda A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Influence of the Process Temperature on the Properties of Friction Stir Welded Blanks Made of Mild Steel and Aluminum T2 - Key Engineering Materials Y1 - 2014 U6 - https://doi.org/10.4028/www.scientific.net/KEM.611-612.1429 SN - 1662-9795 SN - 1013-9826 VL - 611-612 SP - 1429 EP - 1436 ER - TY - GEN A1 - Bambach, Markus T1 - Re-Meshing in Finite Element Simulations of Hot Working Including a Microstructural Evolution Model T2 - Key Engineering Materials Y1 - 2014 U6 - https://doi.org/10.4028/www.scientific.net/KEM.611-612.505 SN - 1662-9795 SN - 1013-9826 VL - 611-612 SP - 505 EP - 512 ER - TY - GEN A1 - Henke, Thomas A1 - Hirt, Gerhard A1 - Bambach, Markus T1 - Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process T2 - Materials Science Forum Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/MSF.762.354 SN - 1662-9752 VL - 762 SP - 354 EP - 359 ER - TY - GEN A1 - Voswinckel, Holger A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Process Limits of Stretch and Shrink Flanging by Incremental Sheet Metal Forming T2 - Key Engineering Materials Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/KEM.549.45 SN - 1662-9795 VL - 549 SP - 45 EP - 52 ER - TY - GEN A1 - Russig, Christoph A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Experimental Investigations of Different Tool Concepts for Rotary Peen Forming T2 - Key Engineering Materials Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/KEM.549.53 SN - 1662-9795 VL - 549 SP - 53 EP - 60 ER - TY - GEN A1 - Mosecker, Linda A1 - Göttmann, Alexander A1 - Saeed-Akbari, Alireza A1 - Bleck, Wolfgang A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Deformation Mechanisms of Ti6Al4V Sheet Material during the Incremental Sheet Forming with Laser Heating T2 - Key Engineering Materials Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/KEM.549.372 SN - 1662-9795 VL - 549 SP - 372 EP - 380 ER - TY - GEN A1 - Henke, Thomas A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Die and process design for hot forging of a gear wheel – a case study T2 - Key Engineering Materials Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/KEM.554-557.307 SN - 1662-9795 VL - 554-557 SP - 307 EP - 316 ER - TY - GEN A1 - Bambach, Markus A1 - Heinkenschloss, Matthias A1 - Herty, Michael T1 - A Method for Model Identification and Parameter Estimation T2 - Inverse Problems Y1 - 2013 U6 - https://doi.org/10.1088/0266-5611/29/2/025009 SN - 1361-6420 SN - 0266-5611 VL - 29 IS - 2 SP - 025009 ER - TY - GEN A1 - Göttmann, Alexander A1 - Bailly, David A1 - Bergweiler, Georg A1 - Bambach, Markus A1 - Stollenwerk, Jochen A1 - Hirt, Gerhard A1 - Loosen, P. T1 - A novel approach for temperature control in ISF supported by laser and resistance heating T2 - The International Journal of Advanced Manufacturing Technology Y1 - 2013 U6 - https://doi.org/10.1007/s00170-012-4640-z SN - 0268-3768 SN - 1433-3015 VL - 67 IS - 9 SP - 2195 EP - 2205 ER - TY - GEN A1 - Lohmar, Johannes A1 - Bambach, Markus A1 - Karhausen, Kai-Friedrich T1 - Influence of Microstructure Representation on Flow Stress and Grain Size Prediction in Through-Process Modeling of AA5182 Sheet Production T2 - JOM Journal of the Minerals, Metals and Materials Society Y1 - 2013 U6 - https://doi.org/10.1007/s11837-012-0485-z VL - 65 IS - 1 SP - 93 EP - 98 ER - TY - GEN A1 - Deli, Housein A1 - Reichardt, Tilo A1 - Demant, Andreas A1 - Bambach, Markus A1 - Diaco, Mike A1 - Lüling, Axel A1 - Köhler, Günter T1 - Nanoskalierte Schmiermitteladditive ermöglichen Leistungssteigerung beim Gesenkschmieden T2 - Stahl und Eisen Y1 - 2012 SN - 0340-479x VL - 132 IS - 7 SP - 55 EP - 65 ER - TY - GEN A1 - Henke, Thomas A1 - Hirt, Gerhard A1 - Bambach, Markus T1 - Optimization of a Closed Die Forging Process to Manufacture a Gear Wheel by the Use of a Response Surface Model T2 - Advanced Materials Research Y1 - 2014 U6 - https://doi.org/10.4028/www.scientific.net/AMR.922.254 SN - 1662-8985 SN - 1022-6680 VL - 922 SP - 254 EP - 259 ER - TY - GEN A1 - Bambach, Markus A1 - Pietryga, Michael P. A1 - Mikloweit, Alexander A1 - Hirt, Gerhard A1 - Karhausen, Kai-Friedrich T1 - Finite Element Implementation of a Bonding Model and Application to Roll Bonding of Aluminum Sheets of Largely Different Yield Strength T2 - Materials Science Forum Y1 - 2014 U6 - https://doi.org/10.4028/www.scientific.net/MSF.783-786.644 SN - 1662-9752 SN - 0255-5476 VL - 783-786 SP - 644 EP - 650 ER - TY - GEN A1 - Russig, Christoph A1 - Bambach, Markus A1 - Hirt, Gerhard A1 - Holtmann, N. T1 - Shot peen forming of fiber metal laminates on the example of GLARE® T2 - International Journal of Material Forming Y1 - 2014 U6 - https://doi.org/10.1007/s12289-013-1137-8 SN - 1960-6206 SN - 1960-6214 VL - 7 IS - 4 SP - 425 EP - 438 ER - TY - GEN A1 - Bambach, Markus T1 - Implications from the Poliak–Jonas criterion for the construction of flow stress models incorporating dynamic recrystallization T2 - Acta Materialia Y1 - 2013 U6 - https://doi.org/10.1016/j.actamat.2013.07.006 SN - 1359-6454 VL - 61 IS - 16 SP - 6222 EP - 6233 ER - TY - GEN A1 - Göttmann, Alexander A1 - Mertin, Chris A1 - Mosecker, Linda A1 - Naumov, Andreas A1 - Bambach, Markus T1 - Properties of Friction Stir Welded Blanks Made from DC04 Mild Steel and Aluminum AA6016 T2 - Advanced Materials Research Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/AMR.769.237 SN - 1662-8985 SN - 1022-6680 VL - 769 SP - 237 EP - 244 ER - TY - GEN A1 - Henke, Thomas A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Quantification of uncertainties in grain size predictions of a microstructure-based flow stress model and application to gear wheel forging T2 - CIRP Annals - Manufacturing Technology Y1 - 2013 U6 - https://doi.org/10.1016/j.cirp.2013.03.121 SN - 0007-8506 SN - 1726-0604 VL - 62 IS - 1 SP - 287 EP - 290 ER - TY - GEN A1 - Vladimirov, Ivaylo N. A1 - Bambach, Markus A1 - Herty, Michael A1 - Bücker, H. Martin T1 - Identification of optimal material models and parameters in finite strain plasticity T2 - Proceedings in applied mathematics and mechanics : PAMM Y1 - 2013 U6 - https://doi.org/10.1002/pamm.201310163 SN - 1617-7061 VL - 13 IS - 1 SP - 335 EP - 336 ER - TY - GEN A1 - Bambach, Markus A1 - Grzibovskis, Richards T1 - Analysis of optimal metal flow in incremental sheet forming T2 - Proceedings in applied mathematics and mechanics : PAMM Y1 - 2013 U6 - https://doi.org/10.1002/pamm.201310161 VL - 13 IS - 1 SP - 331 EP - 332 ER - TY - GEN A1 - Bambach, Markus T1 - Conditions for Consistent Implementation of Flow Stress Models Incorporating Dynamic Recrystallization into Finite Element Simulation Codes T2 - Materials Science Forum Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/MSF.762.325 SN - 1662-9752 SN - 0255-5476 VL - 762 SP - 325 EP - 330 ER - TY - GEN A1 - Lohmar, Johannes A1 - Bambach, Markus T1 - Influence of Different Interpolation Techniques on the Determination of the Critical Conditions for the Onset of Dynamic Recrystallisation T2 - Materials Science Forum Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/MSF.762.331 SN - 1662-9752 SN - 0255-5476 VL - 762 SP - 331 EP - 336 ER - TY - CHAP A1 - Seuren, Simon A1 - Willkomm, Johannes A1 - Bücker, Hans A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Sensitivity Analysis of a Force and Microstructure Model for Plate Rolling T2 - Metal Forming 2012, proceedings of the 14th International Conference on Metal forming, September 16 - 19, 2012, Krakow, Poland Y1 - 2012 SN - 978-3-514-00797-0 SP - 91 EP - 94 PB - Wiley-VCH CY - Weinheim ER - TY - CHAP A1 - Bambach, Markus A1 - Seuren, Simon A1 - Henke, Thomas A1 - Heppner, Stephan A1 - Xiong, Wei A1 - Hirt, Gerhard T1 - Konzepte zur integrierten Modellierung von Gefüge- und Fließspannungsentwicklung in der Simulation von Warmumformprozessen T2 - Tagungsband, 13. RoundTable Simulation in der Umformtechnik, 23. bis 26. April 2012, Bamberg Y1 - 2012 SN - 978-3-9813814-1-2 SP - 117 EP - 139 PB - Simufact Engineering GmbH CY - Hamburg ER - TY - GEN A1 - Bambach, Markus T1 - Recent trends in metal forming: From process simulation and microstructure control in classical forming processes to hybrid combinations between forming and additive manufacturing T2 - Journal of Machine Engineering Y1 - 2016 SN - 1895-7595 VL - 16 IS - 2 SP - 5 EP - 17 ER - TY - GEN A1 - Mertin, Chris A1 - Mosecker, Linda A1 - Naumov, Andreas A1 - Göttmann, Alexander A1 - Bambach, Markus T1 - Analysis of friction stir welded blanks made from DC04 mild steel and aluminium AA6016 T2 - 20. Sächsische Fachtagung Umformtechnik, Tagungsband, Dresden, 27. - 28. November 2013 Y1 - 2013 PB - Technische Universität CY - Dresden ER - TY - CHAP A1 - Göttmann, Alexander A1 - Korinth, Marcus Christopher A1 - Schäfer, V. A1 - Taleb-Araghi, Babak A1 - Bambach, Markus A1 - Hirt, Gerhard ED - Schuh, Günther ED - Neugebauer, Reimund ED - Uhlmann, Eckart T1 - Manufacturing of Individualized Cranial Implants Using Two Point Incremental Sheet Metal Forming T2 - Future Trends in Production Engineering, Proceedings of the First Conference of the German Academic Society for Production Engineering (WGP), Berlin, Germany, 8th-9th June 2011 Y1 - 2013 SN - 978-3-642-24490-2 U6 - https://doi.org/10.1007/978-3-642-24491-9_28 SP - 287 EP - 295 PB - Springer CY - Berlin [u.a.] ER - TY - CHAP A1 - Hirt, Gerhard A1 - Bambach, Markus A1 - Seuren, Simon A1 - Henke, Thomas T1 - Current aspects of modelling in hot rolling T2 - Conference papers, 4th International Conference on Thermomechanical Processing of Steels : 10 - 12 September 2012, Sheffield, UK Y1 - 2012 SP - 36 EP - 38 PB - IOM Communications CY - London ER - TY - CHAP A1 - Seuren, Simon A1 - Romans, T. A1 - Recker, D. A1 - Rosenstock, D. A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Void closure in heavy ingots – a comparison of rolling and open die forging T2 - Proceedings, ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging, 3 - 7 June 2012, Aachen, Germany, Eurogress Y1 - 2012 N1 - DVD-ROM SP - 1 EP - 5 CY - Aachen ER - TY - CHAP A1 - Heppner, Stephan A1 - Bambach, Markus A1 - Karhausen, Kai-Friedrich T1 - Identification of Parameters in Physically Based Material Models T2 - Metal Forming 2012, proceedings of the 14th International Conference on Metal forming, September 16 - 19, 2012, Krakow, Poland Y1 - 2012 SN - 978-3-514-00797-0 SP - 955 EP - 958 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Bolz, Sebastian A1 - Weiß, Sabine T1 - Devising Strain Hardening Models Using Kocks-Mecking Plots - A Comparison of Model Development for Titanium Aluminides and Case Hardening Steel T2 - Metals KW - titanium aluminides alloy KW - single phase steel KW - hot forming Y1 - 2016 U6 - https://doi.org/10.3390/met6090204 SN - 2075-4701 VL - 6 IS - 9 SP - 204 ER - TY - CHAP A1 - Seidlitz, Holger A1 - Bambach, Markus A1 - Fritzsche, Sebastian A1 - Gerstenberger, Colin T1 - High load‐bearing multi‐material‐joints for metal sheets and composites by incremental in‐situ forming processes T2 - ESAFORM 2016, proceedings of the 19th International ESAFORM Conference on Material Forming, conference date: 27-29 April 2016, Nantes, France Y1 - 2016 SN - 978-0-7354-1427-3 U6 - https://doi.org/10.1063/1.4963464 PB - AIP Publishing CY - Melville, NY ER - TY - CHAP A1 - Maqbool, Fawad A1 - Elze, Lars A1 - Seidlitz, Holger A1 - Bambach, Markus T1 - Comparison of Manufacturing of Lightweight Corrugated Sheet Sandwiches by Hydroforming and Incremental Sheet Forming T2 - ESAFORM 2016, proceedings of the 19th International ESAFORM Conference on Material Forming, conference date: 27-29 April 2016, Nantes, France Y1 - 2016 SN - 978-0-7354-1427-3 U6 - https://doi.org/10.1063/1.4963456 PB - AIP Publishing CY - Melville, NY ER - TY - GEN A1 - Bambach, Markus A1 - Häck, Axel-Stefan A1 - Herty, Michael T1 - Modeling steel rolling processes by fluid-like differential equations T2 - Applied Mathematical Modelling Y1 - 2017 U6 - https://doi.org/10.1016/j.apm.2016.10.056 VL - 43 SP - 155 EP - 168 ER - TY - CHAP A1 - Hojda, Stephan A1 - Bambach, Markus ED - Schmitz, Georg ED - Prahl, Ulrich T1 - Forming Processes T2 - Handbook of Software Solutions for ICME Y1 - 2016 SN - 978-3-527-33902-0 SP - 81 EP - 95 PB - Wiley-VCH Verlag CY - Weinheim ER - TY - RPRT A1 - Bambach, Markus A1 - Sviridov, Alexander A1 - Behrens, Bernd-Arno A1 - Almohallami, Amer T1 - Prozessoptimierung des Fügens durch Knickbauchen mittels lokaler Halbwarmumformung KW - Umformfügen KW - mechanisches Fügen KW - Rohre Y1 - 2016 SN - 978-3-86776-497-1 PB - Verlag der Europäischen Forschungsgesellschaft CY - Hannover ER - TY - GEN A1 - Sviridov, Alexander A1 - Grützner, Philip A1 - Rusch, Michael A1 - Bambach, Markus T1 - Joining by upset bulging - Tooling design and new concepts for online process control using servo presses and local heating T2 - Journal of Machine Engineering KW - tube forming KW - mechanical joining KW - servo press KW - upset bulging KW - local heating Y1 - 2017 SN - 1895-7595 SN - 1642-6568 VL - 17 IS - 1 SP - 78 EP - 87 ER - TY - CHAP A1 - Bambach, Markus A1 - Imran, Muhammad A1 - Buhl, Johannes A1 - Härtel, Sebastian A1 - Awiszus, Birgit ED - Szeliga, Danuta ED - Rauch, Łukasz T1 - Towards intelligent materials testing with reduced experimental effort for hot forming T2 - KomPlasTech 2017 : XXIV International Conference on Computer Methods in Materials Technology, January 15-18, 2017, Zakopane, Poland : book of abstracts KW - Intelligent materials testing KW - Hot working Y1 - 2017 SN - 978-83-947091-0-5 SP - 72 EP - 73 PB - AKNET-PRess CY - Krakow ER - TY - CHAP A1 - Sizova, Irina A1 - Sviridov, Alexander A1 - Günther, Martin A1 - Bambach, Markus ED - Szeliga, Danuta ED - Rauch, Łukasz T1 - Finite element modelling of titanium aluminides T2 - KomPlasTech 2017 : XXIV International Conference on Computer Methods in Materials Technology, January 15-18, 2017, Zakopane, Poland : book of abstracts KW - Titanium aluminide alloy KW - Hot forming KW - Flow stress Y1 - 2017 SN - 978-83-947091-0-5 SP - 46 EP - 47 PB - AKNET-PRess CY - Krakow ER - TY - GEN A1 - La Batut, Benoit de A1 - Fergani, Omar A1 - Brotan, Vegard A1 - Bambach, Markus A1 - El Mansouri, Mohamed T1 - Analytical and Numerical Temperature Prediction in Direct Metal Deposition of Ti6Al4V T2 - Journal of Manufacturing and Materials Processing Y1 - 2017 U6 - https://doi.org/10.3390/jmmp1010003 SN - 2504-4494 VL - 1 IS - 1 SP - 3 ER - TY - GEN A1 - Neumann, Andreas A1 - Bambach, Markus A1 - Käb, Jochen A1 - Gleich, Henning T1 - Schüttgutklebtechnologie T2 - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb Y1 - 2017 U6 - https://doi.org/10.3139/104.111673 VL - 112 IS - 3 SP - 107 EP - 110 ER - TY - CHAP A1 - Bambach, Markus A1 - Sizova, Irina A1 - Bolz, Sebastian A1 - Weiß, Sabine T1 - Development of a dynamic recrystallization model for a β-solidifying titanium aluminide alloy using Kocks-Mecking plots T2 - ESAFORM 2016, proceedings of the 19th International ESAFORM Conference on Material Forming, Nantes, France, 27-29 April 2016 Y1 - 2016 SN - 978-0-7354-1427-3 U6 - https://doi.org/10.1063/1.4963545 SP - 160002-1 EP - 160002-7 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Laugwitz, Marvin A1 - Voswinckel, Holger A1 - Hirt, Gerhard A1 - Bambach, Markus T1 - Development of tooling concepts to increase geometrical accuracy in high speed incremental hole flanging T2 - International Journal of Material Forming Y1 - 2018 U6 - https://doi.org/10.1007/s12289-017-1356-5 SN - 1960-6206 SN - 1960-6214 VL - 11 IS - 4 SP - 471 EP - 477 ER - TY - CHAP A1 - Rusch, Michael A1 - Almohallami, Amer A1 - Sviridov, Alexander A1 - Bonk, Christian A1 - Behrens, Bernd-Arno A1 - Bambach, Markus ED - Brabazon, Dermot ED - Naher, Sumsun ED - Ahad, Inam Ul T1 - Process optimization of joining by upset bulging with local heating T2 - Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Dublin, Ireland, 26-28 April 2017 Y1 - 2017 SN - 978-0-7354-1580-5 U6 - https://doi.org/10.1063/1.5008137 PB - AIP Publishing CY - Melville, New York ER - TY - CHAP A1 - Bambach, Markus A1 - Sviridov, Alexander A1 - Weisheit, Andreas ED - Brabazon, Dermot ED - Naher, Sumsun ED - Ahad, Inam Ul T1 - Stiffness management of sheet metal parts using laser metal deposition T2 - Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Dublin, Ireland, 26-28 April 2017 Y1 - 2017 SN - 978-0-7354-1580-5 U6 - https://doi.org/10.1063/1.5008094 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Maqbool, Fawad A1 - Bambach, Markus T1 - Revealing the Dominant Forming Mechanism of Single Point Incremental Forming (SPIF) by Splitting Plastic Energy Dissipation T2 - Procedia Engineering Y1 - 2017 U6 - https://doi.org/10.1016/j.proeng.2017.04.018 SN - 1877-7058 VL - 183 SP - 188 EP - 193 ER - TY - GEN A1 - Bambach, Markus A1 - Voswinckel, Holger A1 - Hirt, Gerhard T1 - A New Process Design for Performing Hole-flanging Operations by Incremental Sheet Forming T2 - Procedia Engineering Y1 - 2014 U6 - https://doi.org/10.1016/j.proeng.2014.10.325 SN - 1877-7058 VL - 81 SP - 2305 EP - 2310 ER - TY - GEN A1 - Lohmar, Johannes A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Comparison of Semi-empirical and Dislocation Density based Material Equations for Fast Modeling of Multistage Hot Working of Steel T2 - Procedia Engineering Y1 - 2014 U6 - https://doi.org/10.1016/j.proeng.2014.09.162 SN - 1877-7058 N1 - 11th International Conference on Technology of Plasticity, ICTP 2014, 19 - 24 October 2014, Nagoya, Japan VL - 81 SP - 268 EP - 273 ER - TY - CHAP A1 - Maqbool, Fawad A1 - Bambach, Markus ED - Brabazon, Dermot ED - Naher, Sumsun ED - Ahad, Inam Ul T1 - A Modular Tooling Set-up for Incremental Sheet Forming (ISF) with Subsequent Stress-Relief Annealing under Partial Constraints T2 - Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Dublin, Ireland, 26-28 April 2017 Y1 - 2017 SN - 978-0-7354-1580-5 U6 - https://doi.org/10.1063/1.5008090 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Bambach, Markus A1 - Buhl, Johannes A1 - Hart-Rawung, Thawin A1 - Lechner, Michael A1 - Merklein, Marion T1 - Towards virtual deformation dilatometry for the design of hot stamping process T2 - Procedia Engineering KW - Hot Stamping KW - Dilatometry test KW - Autenite decomposition model Y1 - 2017 U6 - https://doi.org/10.1016/j.proeng.2017.10.945 SN - 1877-7058 N1 - International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom VL - 207 SP - 1821 EP - 1826 ER - TY - GEN A1 - Sizova, Irina A1 - Bambach, Markus T1 - Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing T2 - Procedia Engineering KW - additive manufacturing KW - hot forging KW - microstructure KW - hot working behaviour Y1 - 2017 U6 - https://doi.org/10.1016/j.proeng.2017.10.1048 SN - 1877-7058 N1 - International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom VL - 207 SP - 1170 EP - 1175 ER - TY - GEN A1 - Imran, Muhammad A1 - Bambach, Markus T1 - A new model for dynamic recrystallization under hot working conditions based on critical dislocation gradients T2 - Procedia Engineering KW - Hot working KW - Dynamic recrystallization KW - Dislocation density gradient Y1 - 2017 U6 - https://doi.org/10.1016/j.proeng.2017.10.1111 SN - 1877-7058 N1 - International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom VL - 207 SP - 2107 EP - 2112 ER - TY - GEN A1 - Junk, Stefan A1 - Bambach, Markus T1 - Application of 3D (color) printing for the visualization and optimization of complex metal forming processes T2 - Procedia Engineering KW - Vizualisation KW - 3D-Printing KW - physical model KW - forming process Y1 - 2017 U6 - https://doi.org/10.1016/j.proeng.2017.10.1134 SN - 1877-7058 N1 - International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom VL - 207 SP - 1081 EP - 1086 ER - TY - GEN A1 - Sviridov, Alexander A1 - Rusch, Michael A1 - Almohallami, Amer A1 - Bonk, Christian A1 - Bouguecha, Anas A1 - Bambach, Markus A1 - Behrens, Bernd-Arno T1 - Creating load-adapted mechanical joints between tubes and sheets by controlling the material flow under plastically unstable tube upsetting T2 - Procedia Engineering KW - tube forming KW - mechanical joining KW - upset bulging KW - shape optimization Y1 - 2017 U6 - https://doi.org/10.1016/j.proeng.2017.10.860 SN - 1877-7058 N1 - International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom VL - 207 SP - 968 EP - 973 ER - TY - PAT A1 - Bambach, Markus A1 - Fischer, Georg A1 - Röhrich, Tobias T1 - Verfahren und Anlage zur kombiniert additiven und umformenden Fertigung Y1 - 2017 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Sviridov, Alexander A1 - Stendal, Johan Andreas A1 - Günther, Martin T1 - Batch Processing in Preassembled Die Sets - A New Process Design for Isothermal Forging of Titanium Aluminides T2 - Journal of Manufacturing and Materials Processing Y1 - 2018 U6 - https://doi.org/doi:10.3390/jmmp2010001 SN - 2504-4494 VL - 2 IS - 1 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Silze, Frank A1 - Schnick, Michael T1 - Hot workability and microstructure evolution of the nickel-based superalloy Inconel 718 produced by laser metal deposition T2 - Journal of Alloys and Compounds Y1 - 2018 U6 - https://doi.org/10.1016/j.jallcom.2018.01.029 SN - 0925-8388 VL - Vol. 740 SP - 278 EP - 287 ER - TY - GEN A1 - Sizova, Irina A1 - Bambach, Markus T1 - Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing T2 - Journal of Materials Processing Technology Y1 - 2018 U6 - https://doi.org/10.1016/j.jmatprotec.2018.02.017 SN - 0924-0136 VL - 256 SP - 154 EP - 159 ER - TY - GEN A1 - Bambach, Markus A1 - Emdadi, Aliakbar A1 - Sizova, Irina A1 - Hecht, Ulrike A1 - Pyczak, Florian T1 - Isothermal forging of titanium aluminides without beta-phase — Using non-equilibrium phases produced by spark plasma sintering for improved hot working behavior T2 - Intermetallics Y1 - 2018 U6 - https://doi.org/10.1016/j.intermet.2018.07.004 SN - 0966-9795 VL - 101 SP - 44 EP - 55 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina ED - Fratini, Livan ED - Di Lorenzo, Rosa ED - Buffa, Gianluca ED - Ingarao, Guiseppe T1 - Hot working behavior of selective laser melted and laser metal deposited Inconel 718 T2 - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018 Y1 - 2018 SN - 978-0-7354-1663-5 U6 - https://doi.org/10.1063/1.5035058 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Imran, Muhammad A1 - Bambach, Markus ED - Fratini, Livan ED - Di Lorenzo, Rosa ED - Buffa, Gianluca ED - Ingarao, Guiseppe T1 - Towards the damage evaluation using Gurson-Tvergaard-Needleman (GTN) model for hot forming processes T2 - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018 Y1 - 2018 SN - 978-0-7354-1663-5 U6 - https://doi.org/10.1063/1.5035063 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Ünsal, Ismail A1 - Hama-Saleh, Rebar A1 - Sviridov, Alexander A1 - Bambach, Markus A1 - Weisheit, Andreas A1 - Schleifenbaum, Johannes Henrich T1 - Mechanical properties of sheet metal components with local reinforcement produced by additive manufacturing T2 - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018 Y1 - 2018 SN - 978-0-7354-1663-5 U6 - https://doi.org/10.1063/1.5035054 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Conte, Romina A1 - Buhl, Johannes A1 - Ambrogio, Giuseppina A1 - Bambach, Markus ED - Fratini, Livan ED - Di Lorenzo, Rosa ED - Buffa, Gianluca ED - Ingarao, Guiseppe T1 - Joining of aluminum sheet and glass fiber reinforced polymer using extruded pins T2 - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018 Y1 - 2018 SN - 978-0-7354-1663-5 U6 - https://doi.org/10.1063/1.5034881 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Klusemann, Benjamin A1 - Bambach, Markus ED - Fratini, Livan ED - Di Lorenzo, Rosa ED - Buffa, Gianluca ED - Buffa, Gianluca T1 - Stability of phase transformation models for Ti-6Al-4V under cyclic thermal loading imposed during laser metal deposition T2 - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018 Y1 - 2018 SN - 978-0-7354-1663-5 U6 - https://doi.org/10.1063/1.5035004 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Nguyen, Lam A1 - Buhl, Johannes A1 - Bambach, Markus T1 - Decomposition algorithm for tool path planning for wire-arc additive manufacturing T2 - Journal of Machine Engineering Y1 - 2018 U6 - https://doi.org/10.5604/01.3001.0010.8827 SN - 1895-7595 SN - 2391-8071 VL - 18 IS - 1 SP - 96 EP - 107 ER - TY - GEN A1 - Fergani, Omar A1 - Bratli, Wold A. A1 - Berto, F. A1 - Brotan, Vegard A1 - Bambach, Markus T1 - Study of the effect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting T2 - Fatigue & Fracture of Engineering Materials & Structures Y1 - 2018 U6 - https://doi.org/10.1111/ffe.12755 SN - 1460-2695 VL - 41 IS - 5 SP - 1102 EP - 1119 ER - TY - GEN A1 - Yang, D. Y. A1 - Bambach, Markus A1 - Cao, J. A1 - Duflou, J. R. A1 - Groche, P. A1 - Kuboki, T. A1 - Sterzing, A. A1 - Tekkaya, A. Erman A1 - Lee, C. W. T1 - Flexibility in metal forming T2 - CIRP Annals N2 - Flexibility in metal forming is needed more than ever before due to rapidly changing customer demands. It paves the way for a better control of uncertainties in development and application of metal forming processes. Although flexibility has been pursued from various viewpoints in terms of machines, material, process, working environment and properties, etc., a thorough study of the concept was undertaken in order to with problems of manufacturing competiveness and tackle new challenges of manufacturing surroundings. Therefore, in this paper, flexibility in forming is reviewed from the viewpoints of process, material, manufacturing environment, new process combinations and machine–system–software interactions. Y1 - 2018 U6 - https://doi.org/10.1016/j.cirp.2018.05.004 SN - 0007-8506 VL - 67 IS - 2 SP - 743 EP - 765 ER - TY - GEN A1 - Maqbool, Fawad A1 - Bambach, Markus T1 - Dominant deformation mechanisms in single point incremental forming (SPIF) and their effect on geometrical accuracy T2 - International Journal of Mechanical Sciences Y1 - 2018 U6 - https://doi.org/10.1016/j.ijmecsci.2017.12.053 SN - 0020-7403 VL - 136 SP - 279 EP - 292 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Silze, Frank A1 - Schnick, Michael T1 - Comparison of laser metal deposition of Inconel 718 from powder, hot and cold wire T2 - Procedia CIRP N2 - 10th CIRP conference on Photonic Technologies LANE 2018, September 03 - 06, 2018, Fürth, Germany Y1 - 2018 U6 - https://doi.org/10.1016/j.procir.2018.08.095 SN - 2212-8271 VL - 74 SP - 206 EP - 209 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Emdadi, Aliakbar T1 - Towards Damage Controlled Hot Forming T2 - Applied Mechanics and Materials Y1 - 2018 U6 - https://doi.org/10.4028/www.scientific.net/AMM.885.56 SN - 1662-7482 VL - 85 SP - 56 EP - 63 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Emdadi, Aliakbar T1 - Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting T2 - Journal of Manufacturing Processes Y1 - 2019 U6 - https://doi.org/10.1016/j.jmapro.2018.11.011 SN - 1526-6125 SN - 0278-6125 VL - 37 SP - 150 EP - 158 ER - TY - GEN A1 - Hart-Rawung, Thawin A1 - Buhl, Johannes A1 - Bambach, Markus T1 - Extension of a phase transformation model for partial hardening in hot stamping T2 - Journal of Machine Engineering Y1 - 2018 U6 - https://doi.org/10.5604/01.3001.0012.4619 SN - 1895-7595 SN - 2391-8071 VL - 18 IS - 3 SP - 87 EP - 97 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Geisen, Ole A1 - Fergani, Omar T1 - Comparison of the Hot Working Behavior of Wrought, Selective Laser Melted and Electron Beam Melted Ti-6Al-4V T2 - Materials Science Forum; Trans Tech Publications Y1 - 2018 U6 - https://doi.org/10.4028/www.scientific.net/MSF.941.2030 SN - 1662-9752 VL - 941 SP - 2030 EP - 2036 ER - TY - GEN A1 - Imran, Muhammad A1 - Afzal, Muhammad Junaid A1 - Bambach, Markus T1 - Analysis of competition between onset of dynamic recrystallization and damage nucleation during hot forming T2 - NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes Y1 - 2019 UR - http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/8A21E11BABCC7A4F852583460038CCA3?OpenDocument SN - 978-0-87339-769-8 SP - 231 EP - 234 ER - TY - GEN A1 - Santhanakrishnan Balakrishnan, Venkateswaran A1 - Hart-Rawung, Thawin A1 - Buhl, Johannes A1 - Seidlitz, Holger A1 - Bambach, Markus T1 - Impact and damage behaviour of FRP-metal hybrid laminates made by the reinforcement of glass fibers on 22MnB5 metal surface T2 - Composites Science and Technology Y1 - 2020 U6 - https://doi.org/10.1016/j.compscitech.2019.107949 SN - 1879-1050 SN - 0266-3538 VL - Vol. 187 ER - TY - GEN A1 - Imran, Muhammad A1 - Szyndler, Joanna A1 - Afzal, Muhammad Junaid A1 - Bambach, Markus T1 - Dynamic recrystallization-dependent damage modeling during hot forming T2 - International Journal of Damage Mechanics Y1 - 2020 U6 - https://doi.org/10.1177/1056789519848477 SN - 1530-7921 VL - 29 IS - 2 SP - 335 EP - 363 ER -