TY - GEN A1 - Awd, Mustafa A1 - Tenkamp, Jochen A1 - Hirtler, Markus A1 - Siddique, Shafaqat A1 - Bambach, Markus A1 - Walther, Frank T1 - Comparison of Microstructure and Mechanical Properties of Scalmalloy Produced by Selective Laser Melting and Laser Metal Deposition T2 - Materials Y1 - 2018 U6 - https://doi.org/10.3390/ma11010017 SN - 1996-1944 VL - 11 IS - 1 ER - TY - GEN A1 - Hirtler, Markus A1 - Jedynak, Angelika A1 - Sydow, Benjamin A1 - Sviridov, Alexander A1 - Bambach, Markus ED - Vollertsen, F. T1 - Investigation of microstructure and hardness of a rib geometry produced by metal forming and wire-arc additive manufacturing T2 - 5th International Conference on New Forming Technology (ICNFT 2018) Bremen, Germany, September 18-21, 2018 Y1 - 2018 U6 - https://doi.org/10.1051/matecconf/201819002005 PB - EDP Sciences CY - Les Ulis ER - TY - GEN A1 - Hirtler, Markus A1 - Sydow, Benjamin A1 - Bambach, Markus A1 - Sizova, Irina A1 - Ali, Y. A1 - Sviridov, Alexander A1 - Bergmann, Jean Pierre T1 - Kombination von umformender und additiver Fertigungsverfahren zu einer ressourceneffizienten Prozesskette T2 - DGM-Tagungsband: Fachtagung Werkstoffe und Additive Fertigung, 25.-26.04.2018, Potsdam Y1 - 2018 SN - 978-3-88355-418-1 SP - 73 EP - 83 ER - TY - GEN A1 - Laugwitz, Marvin A1 - Voswinckel, Holger A1 - Hirt, Gerhard A1 - Bambach, Markus T1 - Development of tooling concepts to increase geometrical accuracy in high speed incremental hole flanging T2 - International Journal of Material Forming Y1 - 2018 U6 - https://doi.org/10.1007/s12289-017-1356-5 SN - 1960-6206 SN - 1960-6214 VL - 11 IS - 4 SP - 471 EP - 477 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Sviridov, Alexander A1 - Stendal, Johan Andreas A1 - Günther, Martin T1 - Batch Processing in Preassembled Die Sets - A New Process Design for Isothermal Forging of Titanium Aluminides T2 - Journal of Manufacturing and Materials Processing Y1 - 2018 U6 - https://doi.org/doi:10.3390/jmmp2010001 SN - 2504-4494 VL - 2 IS - 1 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Silze, Frank A1 - Schnick, Michael T1 - Hot workability and microstructure evolution of the nickel-based superalloy Inconel 718 produced by laser metal deposition T2 - Journal of Alloys and Compounds Y1 - 2018 U6 - https://doi.org/10.1016/j.jallcom.2018.01.029 SN - 0925-8388 VL - Vol. 740 SP - 278 EP - 287 ER - TY - GEN A1 - Sizova, Irina A1 - Bambach, Markus T1 - Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing T2 - Journal of Materials Processing Technology Y1 - 2018 U6 - https://doi.org/10.1016/j.jmatprotec.2018.02.017 SN - 0924-0136 VL - 256 SP - 154 EP - 159 ER - TY - GEN A1 - Bambach, Markus A1 - Emdadi, Aliakbar A1 - Sizova, Irina A1 - Hecht, Ulrike A1 - Pyczak, Florian T1 - Isothermal forging of titanium aluminides without beta-phase — Using non-equilibrium phases produced by spark plasma sintering for improved hot working behavior T2 - Intermetallics Y1 - 2018 U6 - https://doi.org/10.1016/j.intermet.2018.07.004 SN - 0966-9795 VL - 101 SP - 44 EP - 55 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina ED - Fratini, Livan ED - Di Lorenzo, Rosa ED - Buffa, Gianluca ED - Ingarao, Guiseppe T1 - Hot working behavior of selective laser melted and laser metal deposited Inconel 718 T2 - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018 Y1 - 2018 SN - 978-0-7354-1663-5 U6 - https://doi.org/10.1063/1.5035058 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Imran, Muhammad A1 - Bambach, Markus ED - Fratini, Livan ED - Di Lorenzo, Rosa ED - Buffa, Gianluca ED - Ingarao, Guiseppe T1 - Towards the damage evaluation using Gurson-Tvergaard-Needleman (GTN) model for hot forming processes T2 - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018 Y1 - 2018 SN - 978-0-7354-1663-5 U6 - https://doi.org/10.1063/1.5035063 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Ünsal, Ismail A1 - Hama-Saleh, Rebar A1 - Sviridov, Alexander A1 - Bambach, Markus A1 - Weisheit, Andreas A1 - Schleifenbaum, Johannes Henrich T1 - Mechanical properties of sheet metal components with local reinforcement produced by additive manufacturing T2 - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018 Y1 - 2018 SN - 978-0-7354-1663-5 U6 - https://doi.org/10.1063/1.5035054 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Conte, Romina A1 - Buhl, Johannes A1 - Ambrogio, Giuseppina A1 - Bambach, Markus ED - Fratini, Livan ED - Di Lorenzo, Rosa ED - Buffa, Gianluca ED - Ingarao, Guiseppe T1 - Joining of aluminum sheet and glass fiber reinforced polymer using extruded pins T2 - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018 Y1 - 2018 SN - 978-0-7354-1663-5 U6 - https://doi.org/10.1063/1.5034881 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Klusemann, Benjamin A1 - Bambach, Markus ED - Fratini, Livan ED - Di Lorenzo, Rosa ED - Buffa, Gianluca ED - Buffa, Gianluca T1 - Stability of phase transformation models for Ti-6Al-4V under cyclic thermal loading imposed during laser metal deposition T2 - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018 Y1 - 2018 SN - 978-0-7354-1663-5 U6 - https://doi.org/10.1063/1.5035004 PB - AIP Publishing CY - Melville, New York ER - TY - GEN A1 - Nguyen, Lam A1 - Buhl, Johannes A1 - Bambach, Markus T1 - Decomposition algorithm for tool path planning for wire-arc additive manufacturing T2 - Journal of Machine Engineering Y1 - 2018 U6 - https://doi.org/10.5604/01.3001.0010.8827 SN - 1895-7595 SN - 2391-8071 VL - 18 IS - 1 SP - 96 EP - 107 ER - TY - GEN A1 - Fergani, Omar A1 - Bratli, Wold A. A1 - Berto, F. A1 - Brotan, Vegard A1 - Bambach, Markus T1 - Study of the effect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting T2 - Fatigue & Fracture of Engineering Materials & Structures Y1 - 2018 U6 - https://doi.org/10.1111/ffe.12755 SN - 1460-2695 VL - 41 IS - 5 SP - 1102 EP - 1119 ER - TY - GEN A1 - Yang, D. Y. A1 - Bambach, Markus A1 - Cao, J. A1 - Duflou, J. R. A1 - Groche, P. A1 - Kuboki, T. A1 - Sterzing, A. A1 - Tekkaya, A. Erman A1 - Lee, C. W. T1 - Flexibility in metal forming T2 - CIRP Annals N2 - Flexibility in metal forming is needed more than ever before due to rapidly changing customer demands. It paves the way for a better control of uncertainties in development and application of metal forming processes. Although flexibility has been pursued from various viewpoints in terms of machines, material, process, working environment and properties, etc., a thorough study of the concept was undertaken in order to with problems of manufacturing competiveness and tackle new challenges of manufacturing surroundings. Therefore, in this paper, flexibility in forming is reviewed from the viewpoints of process, material, manufacturing environment, new process combinations and machine–system–software interactions. Y1 - 2018 U6 - https://doi.org/10.1016/j.cirp.2018.05.004 SN - 0007-8506 VL - 67 IS - 2 SP - 743 EP - 765 ER - TY - GEN A1 - Maqbool, Fawad A1 - Bambach, Markus T1 - Dominant deformation mechanisms in single point incremental forming (SPIF) and their effect on geometrical accuracy T2 - International Journal of Mechanical Sciences Y1 - 2018 U6 - https://doi.org/10.1016/j.ijmecsci.2017.12.053 SN - 0020-7403 VL - 136 SP - 279 EP - 292 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Silze, Frank A1 - Schnick, Michael T1 - Comparison of laser metal deposition of Inconel 718 from powder, hot and cold wire T2 - Procedia CIRP N2 - 10th CIRP conference on Photonic Technologies LANE 2018, September 03 - 06, 2018, Fürth, Germany Y1 - 2018 U6 - https://doi.org/10.1016/j.procir.2018.08.095 SN - 2212-8271 VL - 74 SP - 206 EP - 209 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Emdadi, Aliakbar T1 - Towards Damage Controlled Hot Forming T2 - Applied Mechanics and Materials Y1 - 2018 U6 - https://doi.org/10.4028/www.scientific.net/AMM.885.56 SN - 1662-7482 VL - 85 SP - 56 EP - 63 ER - TY - GEN A1 - Hart-Rawung, Thawin A1 - Buhl, Johannes A1 - Bambach, Markus T1 - Extension of a phase transformation model for partial hardening in hot stamping T2 - Journal of Machine Engineering Y1 - 2018 U6 - https://doi.org/10.5604/01.3001.0012.4619 SN - 1895-7595 SN - 2391-8071 VL - 18 IS - 3 SP - 87 EP - 97 ER - TY - GEN A1 - Bambach, Markus A1 - Sizova, Irina A1 - Geisen, Ole A1 - Fergani, Omar T1 - Comparison of the Hot Working Behavior of Wrought, Selective Laser Melted and Electron Beam Melted Ti-6Al-4V T2 - Materials Science Forum; Trans Tech Publications Y1 - 2018 U6 - https://doi.org/10.4028/www.scientific.net/MSF.941.2030 SN - 1662-9752 VL - 941 SP - 2030 EP - 2036 ER -