TY - GEN A1 - Sebastia-Saez, Daniel A1 - Hernandez, Leonor A1 - Arellano-García, Harvey A1 - Enrique Julia, Jose T1 - Numerical and experimental characterization of the hydrodynamics and drying kinetics of a barbotine slurry spray T2 - Chemical Engineering Science N2 - Spray drying is a basic unit operation in several process industries such as food, pharmaceutical, ceramic, and others. In this work, a Eulerian-Lagrangian three-phase simulation is presented to study the drying process of barbotine slurry droplets for the production of ceramic tiles. To this end, the simulated velocity field produced by a spray nozzle located at the Institute of Ceramic Technology in Castelló (Spain) is benchmarked against measurements obtained by means of laser Doppler anemometry in order to validate the numerical model. Also, the droplet size distribution generated by the nozzle is obtained at operating conditions by means of laser diffraction and the data obtained are compared qualitatively to those found in the literature. The characteristic Rosin-Rammler droplet size from the distribution is introduced thereafter in the three-phase simulation to analyse the drying kinetics of individual droplets. The model predicts the theoretical linear evolution of the square diameter (D²-law), and the temperature and mass exchange with the environment. The proposed model is intended to support the design and optimization of industrial spray dryers. Y1 - 2019 UR - https://www.sciencedirect.com/science/article/pii/S0009250918308170?via%3Dihub U6 - https://doi.org/10.1016/j.ces.2018.11.040 SN - 1873-4405 SN - 0009-2509 VL - 195 SP - 83 EP - 94 ER - TY - GEN A1 - Foster, Niall A1 - Sebastia-Saez, Daniel A1 - Arellano-García, Harvey T1 - Fractal branch-like fractal shell-and-tube heat exchangers: A CFD study of the shell side performance T2 - IFAC-PapersOnLine N2 - Nature has provided some of the most ingenious and elegant solutions to complex problems over millions of years of refining through evolution. The adaptation of Nature´s solutions to engineering problems is a recent trend which has opened opportunities for improvement in many areas ranging from Architecture to Chemical Engineering. In particular, the use of fractal geometries on heat exchangers is a recent design trend. Recent investigations highlight the benefit of implementing fractal-based geometries on the tube side of shell and tube heat exchangers. A complete evaluation of such devices by assessing the performance of the shell side has not been undertaken, though. Here, we present a systematic numerical assessment of the shell side of a tree-like shaped heat exchanger. Key performance parameters, i.e. temperature change, pressure drop and coefficient of performance, are obtained and compared to those of a straight tube, in order to fully understand the potential of the application of fractal-based shapes to the design of heat exchangers. Y1 - 2019 UR - https://www.sciencedirect.com/science/article/pii/S2405896319301296?via%3Dihub U6 - https://doi.org/10.1016/j.ifacol.2019.06.044 SN - 2405-8963 VL - 52 IS - 1 SP - 100 EP - 105 ER - TY - GEN A1 - Dorneanu, Bogdan A1 - Masham, Elliot A1 - Mechleri, Evgenia A1 - Arellano-García, Harvey T1 - Centralised versus localised supply chain management using a flow configuration model T2 - Computer Aided Chemical Engineering N2 - Traditional food supply chains are often centralised and global in nature. Moreover they require a large amount of resource which is an issue in a time with increasing need for more sustainable food supply chains. A solution is to use localised food supply chains, an option theorised to be more sustainable, yet not proven. Therefore, this paper compares the two systems to investigate which one is more environmentally friendly, cost efficient and resilient to disruption risks. This comparison between the two types of supply chains, is performed using MILP models for an ice cream supply chain for the whole of England over the period of a year. The results obtained from the models show that the localised model performs best environmentally and economically, whilst the traditional, centralised supply chain performs best for resilience. Y1 - 2019 UR - https://www.sciencedirect.com/science/article/abs/pii/B9780128186343502319?via%3Dihub U6 - https://doi.org/10.1016/B978-0-12-818634-3.50231-9 SN - 1570-7946 VL - 46 SP - 1381 EP - 1386 ER - TY - GEN A1 - Yentumi, Richard A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - Modelling and optimal operation of a natural gas fired natural draft heater T2 - Computer Aided Chemical Engineering N2 - Current industrial trends promote reduction of material and energy consumption of fossil fuel burning, and energy-intensive process equipment. It is estimated that approximately 75% of the energy consumption in hydrocarbon processing facilities is used by such equipment as fired heater, hence even small improvements in the energy conservation may lead to significant savings [1, 2]. In this work, a mathematical modelling and optimisation study is undertaken using gPROMS® ProcessBuilder® to determine the optimal operating conditions of an existing API 560 Type-E vertical-cylindrical type natural draft fired heater, in operation at the Atuabo Gas Processing Plant (GPP), in the Western Region of Ghana. It is demonstrated that the optimisation results in significant reduction of fuel gas consumption and operational costs. Y1 - 2019 UR - https://www.sciencedirect.com/science/article/abs/pii/B978012818634350165X?via%3Dihub U6 - https://doi.org/10.1016/B978-0-12-818634-3.50165-X SN - 1570-7946 VL - 46 SP - 985 EP - 990 ER - TY - GEN A1 - Al-Hmoud, Aya A1 - Sebastia-Saez, Daniel A1 - Arellano-García, Harvey T1 - Comparative CFD analysis of thermal energy storage materials in photovoltaic/thermal panels T2 - Computer Aided Chemical Engineering N2 - Photovoltaic/thermal systems are a novel renewable energy approach to transform incident radiation into electricity and simultaneously store the excess thermal energy produced. Both sensible and latent heat storage materials have been investigated in the past for thermal storage; with desert sand having been recently considered as an efficient and inexpensive alternative. In this work, we use a transient Computational Fluid Dynamics simulation to compare the performance of desert sand to that of well-established phase-change materials used in photovoltaic/thermal systems. The simulation gives as a result the temperature profiles within the device as well as the time evolution of the charge/discharge cycles when using PCMs. The results show the suitability of desert sand as a thermal storage material to be used in photovoltaic/thermal systems. Y1 - 2019 UR - https://www.sciencedirect.com/science/article/abs/pii/B9780128186343501338?via%3Dihub U6 - https://doi.org/10.1016/B978-0-12-818634-3.50133-8 SN - 1570-7946 VL - 46 SP - 793 EP - 798 ER - TY - GEN A1 - Mechleri, Evgenia A1 - Sidnell, Tim A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - Optimisation and control of a distributed energy resource network using Internet-of-Things technologies T2 - Computer Aided Chemical Engineering N2 - This work investigates the use of variable pricing to control electricity imported and exported to and from both fixed and unfixed distributed energy resource network designs within the UK residential sector. It was proven that networks which utilise much of their own energy and import little from the national grid are barely affected by variable import pricing, but are encouraged to export more energy to the grid by dynamic export pricing. Dynamic import and export pricing increased CO2 emissions due to feed-in tariffs which encourages CHP generation over lower-carbon technologies such as solar panels or wind turbines. Y1 - 2019 UR - https://www.sciencedirect.com/science/article/abs/pii/B978012818634350014X?via%3Dihub U6 - https://doi.org/10.1016/B978-0-12-818634-3.50014-X SN - 1570-7946 VL - 46 SP - 79 EP - 84 ER - TY - GEN A1 - Arellano-García, Harvey A1 - Dorneanu, Bogdan A1 - Mechleri, Evgenia T1 - Devicification of Food Process Engineering T2 - Reference Module in Chemistry, Molecular Sciences and Chemical Engineering N2 - Food and beverages industry is facing major challenges in the years to come, as the world population is expected to grow, accompanied by a growing need for energy, feed and fuel. Much of the processing in the food industry is performed in small-scale decentralized plants, with relatively few possibilities of energy recovery. Innovation in areas such as process and product modeling, process intensification and process control enable the development of new manufacturing pathways, more efficient, versatile, selective and sustainable. Furthermore, the addition of Internet of Things elements and the way they connect to the physical process will ensure continuous communication between the various actors of the food value chain. This will enable the design of new compact, scalable, flexible, modular, and automated production equipment that will offer food manufacturers the ability to respond rapidly, economically, accurately and flexibly to the consumer demands. Y1 - 2019 UR - https://www.sciencedirect.com/science/article/pii/B9780124095472144269?via%3Dihub U6 - https://doi.org/10.1016/B978-0-12-409547-2.14426-9 VL - 2019 ER - TY - GEN A1 - Arellano-García, Harvey A1 - Ife, Maximilian R. A1 - Sanduk, Mohammed A1 - Sebastia-Saez, Daniel T1 - Hydrogen production via load-matched coupled solar-proton exchange membrane electrolysis using aqueous methanol T2 - Chemical engineering & technology N2 - This study investigates hydrogen production via a directly coupled solar‐PEM electrolysis system using aqueous methanol instead of water. The effect of load matching and methanol concentration on hydrogen production rates, electrolysis efficiency, and solar‐hydrogen efficiency was investigated. The electrolysis efficiencies were subsequently used in simulation studies to estimate production costs in scaled up systems. The results show that the added hydrogen production associated with the methanol solutions leads to favourable hydrogen production costs at smaller scales. Y1 - 2019 U6 - https://doi.org/10.1002/ceat.201900285 SN - 1521-4125 SN - 0930-7516 VL - 42 IS - 11 SP - 2340 EP - 2347 ER - TY - GEN A1 - Sebastia-Saez, Daniel A1 - Ramirez Reina, Tomas A1 - Silva, Ravi A1 - Arellano-García, Harvey T1 - Synthesis and characterisation of n‐octacosane@silica nanocapsules for thermal storage applications T2 - International Journal of Energy Research N2 - This work reports the synthesis and characterisation of a core‐shell n‐octacosane@silica nanoencapsulated phase‐change material obtained via interfacial hydrolysis and polycondensation of tetraethyl orthosilicate in miniemulsion. Silica has been used as the encapsulating material because of its thermal advantages relative to synthesised polymers. The material presents excellent heat storage potential, with a measured melting latent heat varying between 57.1 and 89.0 kJ kg−1 (melting point between 58.2°C and 59.9°C) and a small particle size (between 565 and 227 nm). Degradation of the n‐octacosane core starts between 150°C and 180°C. Also, the use of silica as shell material gives way to a heat conductivity of 0.796 W m−1 K−1 (greater than that of nanoencapsulated materials with polymeric shell). Charge/discharge cycles have been successfully simulated at low pressure to prove the suitability of the nanopowder as phase‐change material. Further research will be carried out in the future regarding the use of the synthesised material in thermal applications involving nanofluids. Y1 - 2019 UR - https://onlinelibrary.wiley.com/doi/10.1002/er.5039 U6 - https://doi.org/10.1002/er.5039 SN - 1099-114X SN - 0363-907X VL - 44 IS - 3 SP - 2306 EP - 2315 ER - TY - GEN A1 - Gehring, Nicole A1 - Dorneanu, Bogdan A1 - Manrique-Silupú, José A1 - Ipanaqué, William A1 - Arellano-García, Harvey T1 - Circular Economy in Banana Cultivation T2 - Computer Aided Chemical Engineering N2 - This paper examines the most important approaches that could be applied for the introduction of circular economy strategies for the banana production process in the region of Piura (Peru). Based on this, a framework for an optimized economic cycle that is able to conserve resources and minimize the capital investments of farmers, while simultaneously increasing their production, can be created. Challenges and potential solutions are discussed for the production stages. Y1 - 2020 UR - https://www.sciencedirect.com/science/article/abs/pii/B9780128233771502627?via%3Dihub U6 - https://doi.org/10.1016/B978-0-12-823377-1.50262-7 SN - 1570-7946 VL - 48 SP - 1567 EP - 1572 ER - TY - GEN A1 - Hamdan, Mustapha A1 - Sebastia-Saez, Daniel A1 - Hamdan, Malak A1 - Arellano-García, Harvey T1 - CFD Analysis of the Use of Desert Sand as Thermal Energy Storage Medium in a Solar Powered Fluidised Bed Harvesting Unit T2 - Computer Aided Chemical Engineering N2 - This work presents an Euler-Euler hydrodynamic and heat transfer numerical analysis of the multiphase flow involving desert sand and a continuous gas phase in a compact-size fluidised bed. The latter is part of a novel conceptual solar power design intended for domestic use. Desert sand is a highly available and unused resource with suitable thermal properties to be employed as thermal energy storage medium. It also allows for high working temperatures owing to its high resistance to agglomeration. Computational Fluid Dynamics simulations are used here to assess the heat transfer between desert sand and several proposed working fluids (including air, argon, nitrogen and carbon dioxide) to justify the design in terms of equipment dimensions and suitability of the materials used. The results show that the device can provide up to 1,031 kW when using carbon dioxide as the heat transfer fluid. Y1 - 2020 UR - https://www.sciencedirect.com/science/article/abs/pii/B9780128233771500598?via%3Dihub U6 - https://doi.org/10.1016/B978-0-12-823377-1.50059-8 SN - 1570-7946 VL - 48 SP - 349 EP - 354 ER - TY - GEN A1 - Menzhausen, Robert A1 - Merino, Manuel A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - A Fuzzy Control Approach for an Industrial Refrigeration System T2 - Computer Aided Chemical Engineering N2 - This contribution presents the development of a model for the refrigeration plant used for mangos, which is able to simulate both the chamber and the fruit temperatures. The model is developed from energy balances for each section of the refrigeration system and the fruits, and is the basis for the setup of a fuzzy controller, capable of regulating continuously the compressor’s frequency to achieve the desired temperature. The model is able to accurately predict the chamber temperature profiles, but is more sensitive when simulating the fruit temperature. The fuzzy controller is able to achieve the set-point more accurately and in a shorter time than the on/off control, achieving a decrease in energy consumption as well. Y1 - 2020 UR - https://www.sciencedirect.com/science/article/abs/pii/B978012823377150210X?via%3Dihub U6 - https://doi.org/10.1016/B978-0-12-823377-1.50210-X SN - 1570-7946 VL - 48 SP - 1255 EP - 1260 ER - TY - GEN A1 - Arellano-García, Harvey A1 - Barz, Tilman A1 - Dorneanu, Bogdan A1 - Vassiliadis, Vassilios S. T1 - Real-time feasibility of nonlinear model predictive control for semi-batch reactors subject to uncertainty and disturbances T2 - Computers & Chemical Engineering N2 - This paper presents two nonlinear model predictive control based methods for solving closed-loop stochastic dynamic optimisation problems, ensuring both robustness and feasibility with respect to state output constraints. The first one is a new deterministic approach, using the wait-and-see strategy. The key idea is to specifically anticipate violation of output hard-constraints, which are strongly affected by instantaneous disturbances, by backing off of their bounds along the moving horizon. The second method is a stochastic approach to solve nonlinear chance-constrained dynamic optimisation problems under uncertainties. The key aspect is the explicit consideration of the stochastic properties of both exogenous and endogenous uncertainties in the problem formulation (here-and-now strategy). The approach considers a nonlinear relation between uncertain inputs and the constrained state outputs. The performance of the proposed methodologies is assessed via an application to a semi-batch reactor under safety constraints, involving strongly exothermic reactions. Y1 - 2020 UR - https://www.sciencedirect.com/science/article/pii/S0098135419303333?via%3Dihub U6 - https://doi.org/10.1016/j.compchemeng.2019.106529 SN - 1873-4375 SN - 0098-1354 VL - 133 ER - TY - GEN A1 - Stephenson, Ted A1 - Carvalho Ellero, Caio A1 - Sebastia-Saez, Daniel A1 - Klymenko, Oleksiy A1 - Battley, Angela Maria A1 - Arellano-García, Harvey T1 - Numerical modelling of the interaction between eccrine sweat and textile fabric for the development of smart clothing T2 - International Journal of Clothing Science and Technology N2 - Purpose Live non-invasive monitoring of biomarkers is of great importance for the medical community. Moreover, some studies suggest that there is a substantial business gap in the development of mass-production commercial sweat-analysing wearables with great revenue potential. The objective of this work is to quantify the concentration of biomarkers that reaches the area of the garment where a sensor is positioned to advance the development of commercial sweat-analysing garments. Design/methodology/approach Computational analysis of the microfluidic transport of biomarkers within eccrine sweat glands provides a powerful way to explore the potential for quantitative measurements of biomarkers that can be related to the health and/or the physical activity parameters of an individual. The numerical modelling of sweat glands and the interaction of sweat with a textile layer remain however rather unexplored. This work presents a simulation of the production of sweat in the eccrine gland, reabsorption from the dermal duct into the surrounding skin and diffusion within an overlying garment. Findings The model represents satisfactorily the relationship between the biomarker concentration and the flow rate of sweat. The biomarker distribution across an overlying garment has also been calculated and subsequently compared to the minimum amount detectable by a sensor previously reported in the literature. The model can thus be utilized to check whether or not a given sensor can detect the minimum biomarker concentration threshold accumulated on a particular type of garment. Originality/value The present work presents to the best of our knowledge, the earliest numerical models of the sweat gland carried out so far. The model describes the flow of human sweat along the sweat duct and on to an overlying piece of garment. The model considers complex phenomena, such as reabsorption of sweat into the skin layers surrounding the duct, and the structure of the fibres composing the garment. Biomarker concentration maps are obtained to check whether sensors can detect the threshold concentration that triggers an electric signal. This model finds application in the development of smart textiles. Y1 - 2020 UR - https://www.emerald.com/insight/content/doi/10.1108/IJCST-07-2019-0100/full/html U6 - https://doi.org/10.1108/IJCST-07-2019-0100 SN - 0955-6222 VL - 32 IS - 5 SP - 761 EP - 774 ER - TY - GEN A1 - Baena-Moreno, Francisco Manuel A1 - Cid-Castillo, N. A1 - Arellano-García, Harvey A1 - Ramirez Reina, Tomas T1 - Towards emission free steel manufacturing – Exploring the advantages of a CO2 methanation unit to minimize CO2 emissions T2 - Science of The Total Environment N2 - This paper demonstrates the benefits of incorporating CO2 utilisation through methanation in the steel industry. This approach allows to produce synthetic methane, which can be recycled back into the steel manufacturing process as fuel and hence saving the consumption of natural gas. To this end, we propose a combined steel-making and CO2 utilisation prototype whose key units (shaft furnace, reformer and methanation unit) have been modelled in Aspen Plus V8.8. Particularly, the results showed an optimal performance of the shaft furnace at 800°C and 6 bar, as well as 1050°C and atmospheric pressure for the reformer unit. Optimal results for the methanation reactor were observed at 350°C. Under these optimal conditions, 97.8% of the total CO2 emissions could be mitigated from a simplified steel manufacturing scenario and 89.4% of the natural gas used in the process could be saved. A light economic approach is also presented, revealing that the process could be profitable with future technologic developments, natural gas prices and forthcoming increases of CO2 emissions taxes. Indeed, the cash-flow can be profitable (325 k€) under the future costs: methanation operational cost at 0.105 €/Nm³; electrolysis operational cost at 0.04 €kWh, natural gas price at 32 €/MWh; and CO2 penalty at 55€/MWh. Hence this strategy is not only environmentally advantageous but also economically appealing and could represent an interesting route to contribute towards steel-making decarbonisation. Y1 - 2021 UR - https://www.sciencedirect.com/science/article/pii/S0048969721018441?via%3Dihub U6 - https://doi.org/10.1016/j.scitotenv.2021.146776 SN - 1879-1026 SN - 0048-9697 VL - 781 ER - TY - GEN A1 - Mechleri, Evgenia A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - A Model Predictive Control-Based Decision-Making Strategy for Residential Microgrids T2 - Eng N2 - This work presents the development of a decision-making strategy for fulfilling the power and heat demands of small residential neighborhoods. The decision on the optimal operation of a microgrid is based on the model predictive control (MPC) rolling horizon. In the design of the residential microgrid, the new approach different technologies, such as photovoltaic (PV) arrays, micro-combined heat and power (micro-CHP) units, conventional boilers and heat and electricity storage tanks are considered. Moreover, electricity transfer between the microgrid components and the national grid are possible. The MPC problem is formulated as a mixed integer linear programming (MILP) model. The proposed novel approach is applied to two case studies: one without electricity storage, and one integrated microgrid with electricity storage. The results show the benefits of considering the integrated microgrid, as well as the advantage of including electricity storage. Y1 - 2022 UR - https://www.mdpi.com/2673-4117/3/1/9 U6 - https://doi.org/10.3390/eng3010009 SN - 2673-4117 VL - 3 IS - 1 SP - 100 EP - 115 ER - TY - GEN A1 - Jurischka, Constantin A1 - Dorneanu, Bogdan A1 - Stollberg, Christian A1 - Arellano-García, Harvey T1 - A novel approach to continuous extraction of active ingredients from essential oils through combined chromatography T2 - Computer Aided Chemical Engineering N2 - This contribution introduces a combined liquid chromatography purification designed for a continuous and resource-efficient process, integrating the rotating columns and the simulated bed principles. The approach is demonstrated and validated based on bisabolol oxides A and B, which are effective ingredients with anti-inflammatory and spasmolytic effects, prepared from chamomile essential oil. The results show superior efficiency to the traditional selective methods for isolating ingredients from multicomponent mixtures, as well as reduction in resources and costs. Y1 - 2022 UR - https://www.sciencedirect.com/science/article/abs/pii/B9780323958790501296?via%3Dihub U6 - https://doi.org/10.1016/B978-0-323-95879-0.50129-6 SN - 1570-7946 VL - 51 SP - 769 EP - 774 ER - TY - GEN A1 - Estrada, Carlos A. A1 - Manrique-Silupú, José A1 - Ipanaqué, William A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - A model-based approach for the prediction of banana rust thrips incidence from atmospheric variables T2 - Computer Aided Chemical Engineering N2 - This work focuses on the development of a mathematical model for the population growth of banana red rust thrips (Chaetanaphothrips signipennis) based on a modified temperature-based growth rate with the addition of climatic variables, such as relative humidity, wind speed and rainfall rate. The aim is to enable better prediction of the pest incidence and improve decision making, productivity, as well as quantifying the influence of these variables on the development of red rust thrips. The developed model is then compared with current solutions for predicting the pest incidence, showing improved accuracy (higher than 67%) versus experimental data, for which the state-of-the-art models indicate extremely poor fits. Y1 - 2022 UR - https://www.sciencedirect.com/science/article/abs/pii/B9780323958790500850?via%3Dihub U6 - https://doi.org/10.1016/B978-0-323-95879-0.50085-0 SN - 1570-7946 VL - 51 SP - 505 EP - 510 ER - TY - GEN A1 - Amao, Khalid A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - Economic Analysis of Novel Pathways for Recovery of Lithium Battery Waste T2 - Computer Aided Chemical Engineering N2 - Using the Umicore process, a current state-of-the-art recycling in the metal recovery industry for lithium battery waste, as a baseline, this contribution examines economic and environmentally friendly solutions for effective metal recovery from spent LIBs. At the same time, possible synergies between existing resource use from other manufacturing and waste treatment industries are considered as valuable input to metal recycling, while also reducing the amount of atmospheric carbon. This further presents a case for possible integration of various waste management approaches as a single business unit for economic incentive and profitability for possible investment. Y1 - 2022 UR - https://www.sciencedirect.com/science/article/abs/pii/B978032395879050271X?via%3Dihub U6 - https://doi.org/10.1016/B978-0-323-95879-0.50271-X SN - 1570-7946 VL - 51 SP - 1621 EP - 1626 ER - TY - GEN A1 - Dorneanu, Bogdan A1 - Heinzelmann, Norbert A1 - Schnitzlein, Klaus A1 - Arellano-García, Harvey T1 - A novel approach to modelling trickle bed reactors T2 - Computer Aided Chemical Engineering N2 - In this contribution, the development of a toolbox for the simulation of trickle bed reactors based on a model able to account for the local properties of the liquid and gas flow in a packed bed at particle scale is introduced. The implementation uses a modular and flexible setup, with local liquid distribution considered as a function of the operating conditions and the physical properties of the three phases. Moreover, the impact of the local incomplete wetting on the conversion, as well as the mass transport and kinetics at both particle and reactor scale are accounted for. Furthermore, different particle geometries are considered, and the model is able to reliably predict the performance of the catalytic trickle bed reactors. Y1 - 2022 UR - https://www.sciencedirect.com/science/article/abs/pii/B9780323958790500473?via%3Dihub U6 - https://doi.org/10.1016/B978-0-323-95879-0.50047-3 SN - 1570-7946 VL - 51 SP - 277 EP - 282 ER - TY - GEN A1 - Campos, Jean C. A1 - Manrique-Silupú, José A1 - Ipanaqué, William A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - Mechanistic modelling for thrips incidence in organic banana T2 - Computer Aided Chemical Engineering N2 - This contribution introduces a data acquisition and modelling framework for the prediction of banana pests’ incidence. An IoT sensors-based system collects weather and micro-climate variables, such as temperature, relative humidity, and wind speed, which are uploaded in real time to a cloud storage space. The incidence of the red rust thrips (Chaetanaphothrips signipennis) is collected “manually” by periodic inspection. The mathematical model is adapted from population growth functions and a model of insect species development and allows predictions to be made at various time intervals with an accuracy greater than 80%, improving decision-making capacity for agro-producers and enabling the improvement of pest management actions. Y1 - 2022 UR - https://www.sciencedirect.com/science/article/abs/pii/B9780323958790500461?via%3Dihub U6 - https://doi.org/10.1016/B978-0-323-95879-0.50046-1 SN - 1570-7946 VL - 51 SP - 271 EP - 276 ER - TY - GEN A1 - Ketabchi, Elham A1 - Ramirez Reina, Tomas A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - An identification approach to a reaction network for an ABE catalytic upgrade T2 - Computer Aided Chemical Engineering N2 - This contribution presents a kinetic study for the identification of the complex reaction mechanism occurring during the ABE upgrading, and the development of a kinetic model. Employing graph theory analysis, a directed bipartite graph is constructed to reduce the complexity of the reaction network, and the reaction rate constants and reaction orders are calculated using the initial rate method, followed by the calculation of the activation energy and frequency factor for an Arrhenius-type law. Subsequently, using general mass balancing a proposed mathematical model is produced to determine the apparent reaction rates, which are successfully in line with the experimental results. Y1 - 2021 UR - https://www.sciencedirect.com/science/article/abs/pii/B9780323885065501029?via%3Dihub U6 - https://doi.org/10.1016/B978-0-323-88506-5.50102-9 SN - 1570-7946 VL - 50 SP - 643 EP - 648 ER - TY - GEN A1 - Clarke, Fiona A1 - Dorneanu, Bogdan A1 - Mechleri, Evgenia A1 - Arellano-García, Harvey T1 - Optimal design of heating and cooling pipeline networks for residential distributed energy resource systems T2 - Energy N2 - This paper presents a mixed integer linear programming model for the optimal design of a distributed energy resource (DER) system that meets electricity, heating, cooling and domestic hot water demands of a neighbourhood. The objective is the optimal selection of the system components among different technologies, as well as the optimal design of the heat pipeline network to allow heat exchange between different nodes in the neighbourhood. More specifically, this work focuses on the design, interaction and operation of the pipeline network, assuming the operation and maintenance costs. Furthermore, thermal and cold storage, transfer of thermal energy, and pipelines for transfer of cold and hot water to meet domestic hot water demands are additions to previously published models. The application of the final model is investigated for a case-study of a neighbourhood of five houses located in the UK. The scalability of the model is tested by also applying the model to a neighbourhood of ten and twenty houses, respectively. Enabling exchange of thermal power between the neighbours, including for storage purposes, and using separate hot and cold pipeline networks reduces the cost and the environmental impact of the resulting DER. Y1 - 2021 UR - https://www.sciencedirect.com/science/article/pii/S0360544221016789?via%3Dihub U6 - https://doi.org/10.1016/j.energy.2021.121430 SN - 1873-6785 SN - 0360-5442 VL - 235 ER -