TY - GEN A1 - Strobel, Carsten A1 - Alvarado Chavarin, Carlos A1 - Knaut, Martin A1 - Völkel, Sandra A1 - Albert, Matthias A1 - Hiess, Andre A1 - Max, Benjamin A1 - Wenger, Christian A1 - Kirchner, Robert A1 - Mikolajick, Thomas T1 - High Gain Graphene Based Hot Electron Transistor with Record High Saturated Output Current Density T2 - Advanced Electronic Materials N2 - Hot electron transistors (HETs) represent an exciting frontier in semiconductor technology, holding the promise of high-speed and high-frequency electronics. With the exploration of two-dimensional materials such as graphene and new device architectures, HETs are poised to revolutionize the landscape of modern electronics. This study highlights a novel HET structure with a record output current density of 800 A/cm² and a high current gain α, fabricated using a scalable fabrication approach. The HET structure comprises two-dimensional hexagonal boron nitride (hBN) and graphene layers wet transferred to a germanium substrate. The combination of these materials results in exceptional performance, particularly in terms of the highly saturated output current density. The scalable fabrication scheme used to produce the HET opens up opportunities for large-scale manufacturing. This breakthrough in HET technology holds promise for advanced electronic applications, offering high current capabilities in a practical and manufacturable device. KW - Graphene KW - Transistor Y1 - 2024 U6 - https://doi.org/10.1002/aelm.202300624 SN - 2199-160X VL - 10 IS - 2 ER - TY - GEN A1 - Strobel, Carsten A1 - Alvarado Chavarin, Carlos A1 - Knaut, Martin A1 - Albert, Matthias A1 - Heinzig, André A1 - Gummadi, Likhith A1 - Wenger, Christian A1 - Mikolajick, Thomas ED - Giannazzo, Filippo ED - Agnello, Simonpietro ED - Seravalli, Luca ED - Bondino, Federica T1 - p-Type Schottky contacts for graphene adjustable-Barrier phototransistors T2 - Nanomaterials N2 - The graphene adjustable-barriers phototransistor is an attractive novel device for potential high speed and high responsivity dual-band photodetection. In this device, graphene is embedded between the semiconductors silicon and germanium. Both n-type and p-type Schottky contacts between graphene and the semiconductors are required for this device. While n-type Schottky contacts are widely investigated, reports about p-type Schottky contacts between graphene and the two involved semiconductors are scarce. In this study, we demonstrate a p-type Schottky contact between graphene and p-germanium. A clear rectification with on–off ratios of close to 10 3 (±5 V) and a distinct photoresponse at telecommunication wavelengths in the infrared are achieved. Further, p-type silicon is transferred to or deposited on graphene, and we also observe rectification and photoresponse in the visible range for some of these p-type Schottky junctions. These results are an important step toward the realization of functional graphene adjustable-barrier phototransistors. KW - phototransistor KW - GABT KW - graphene KW - p-type KW - silicon KW - germanium KW - high responsivity KW - high speed KW - dual-band KW - photodetection Y1 - 2024 U6 - https://doi.org/10.3390/nano14131140 SN - 2079-4991 VL - 14 IS - 13 PB - MDPI ER - TY - GEN A1 - Hayat, Ahsan A1 - Ratzke, Markus A1 - Alvarado Chavarin, Carlos A1 - Zöllner, Marvin Hartwig A1 - Corley-Wiciak, Agnieszka Anna A1 - Schubert, Markus Andreas A1 - Wenger, Christian A1 - Fischer, Inga Anita T1 - Structural and morphological properties of CeO2 films deposited by radio frequency magnetron sputtering for back-end-of-line integration T2 - Thin Solid Films Y1 - 2024 U6 - https://doi.org/10.1016/j.tsf.2024.140547 SN - 0040-6090 VL - 807 ER - TY - GEN A1 - Strobel, Carsten A1 - Alvarado Chavarin, Carlos A1 - Völkel, Sandra A1 - Jahn, Andreas A1 - Hiess, Andre A1 - Knaut, Martin A1 - Albert, Matthias A1 - Wenger, Christian A1 - Steinke, Olaff A1 - Stephan, Ulf A1 - Röhlecke, Sören A1 - Mikolajick, Thomas T1 - Enhanced Electrical Properties of Optimized Vertical Graphene-Base Hot Electron Transistors T2 - ACS Applied Electronic Materials N2 - The arrival of high-mobility two-dimensional materials like graphene leads to the renaissance of former vertical semiconductor–metal–semiconductor (SMS) hot electron transistors. Because of the monolayer thickness of graphene, improved SMS transistors with a semimetallic graphene-base electrode are now feasible for high-frequency applications. In this study we report about a device that consists of amorphous silicon, graphene, and crystalline silicon. For the first time, this device is fabricated by a four-mask lithography process which leads to significant improvements in the device performance. A strongly increased common-emitter current gain of 2% could be achieved while the on–off ratio improved to 1.6 × 105, which is already higher than predicted theoretically. This could be mainly attributed to better interface characteristics and decreased lateral dimensions of the devices. A cutoff frequency of approximately 26 MHz could be forecasted based on the DC measurements of the device. KW - Graphene KW - Transistor Y1 - 2023 U6 - https://doi.org/10.1021/acsaelm.2c01725 SN - 2637-6113 VL - 5 IS - 3 SP - 1670 EP - 1675 ER - TY - GEN A1 - Strobel, Carsten A1 - Alvarado Chavarin, Carlos A1 - Wenger, Christian A1 - Albert, Matthias A1 - Mikolajick, Thomas T1 - Vertical Graphene-Based Transistors for Power Electronics, Optoelectronics and Radio-Frequency Applications T2 - IEEE Nanotechnology Materials and Devices Conference (NMDC), Paestum, Italy, 22-25 October 2023 N2 - The combination of two-dimensional materials, such as graphene, with established thin films offers great opportunities for enabling next-generation vertical transistors for various applications. This paper gives a brief overview about different vertical transistor concepts using twodimensional materials proposed so far, e.g. the hot electron transistor and the Barristor. With the arrival of twodimensional materials, the hot electron transistor also experienced a revival with predicted cut-off frequencies in the THz range. The Barristor overcomes the weak current saturation of lateral graphene field-effect transistors and high on-off ratios up to 107 were demonstrated, which are suitable parameters for logic applications. By combining a semiconductor-graphene-semiconductor design of the simplest hot electron transistor with the Barristor operating principle a new device, called graphene adjustable-barriers transistor, can be realized. This new device concept provides the potential for RF, power electronics, and optoelectronic applications. KW - Graphene Y1 - 2023 SN - 979-8-3503-3546-0 SN - 979-8-3503-3547-7 U6 - https://doi.org/10.1109/NMDC57951.2023.10344102 SN - 2473-0718 SP - 196 EP - 201 PB - Institute of Electrical and Electronics Engineers (IEEE) ER - TY - GEN A1 - Kalra, Amanpreet A1 - Alvarado Chavarin, Carlos A1 - Nitsch, Paul-Gregor A1 - Tschammer, Rudi A1 - Flege, Jan Ingo A1 - Ratzke, Markus A1 - Zoellner, Marvin Hartwig A1 - Schubert, Markus Andreas A1 - Wenger, Christian A1 - Fischer, Inga Anita T1 - Deposition of CeOₓ/SnOₓ-based thin films via RF magnetron sputtering for resistive gas sensing applications T2 - Physica B, Condensed matter N2 - Cerium oxide-tin oxide (CeOx/SnOx) thin films with varying Sn content were deposited using RF magnetron sputtering and investigated for hydrogen sensing applications. Structural, compositional, and morphological properties were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). Gas sensing measurements showed effective hydrogen detection at room temperature, with the sensitivity strongly influenced by Sn content and oxygen vacancy concentration. Higher Sn concentration enhanced the sensing response, which was correlated with microstructural features obtained from AFM and EDX, as well as with the presence of Ce3+ and Ce4+ oxidation states identified by XPS. This study highlights the potential of CeOx/SnOx thin films for possible back-end-of-line integration and provides proof-of-principle for room-temperature hydrogen sensing. KW - RF magnetron sputtering KW - CeOx/SnOx thin film KW - Room temperature KW - Hydrogen sensing Y1 - 2026 U6 - https://doi.org/10.1016/j.physb.2025.418098 SN - 0921-4526 VL - 723 SP - 1 EP - 7 PB - Elsevier BV CY - Amsterdam ER -