<?xml version="1.0" encoding="utf-8"?>
<export-example>
  <doc>
    <id>30047</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>223</pageFirst>
    <pageLast>231</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>Vol. 39</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2023-01-17</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Investigation of quench hardening behavior of directed energy deposited 22MnB5 steel for local reinforcement of hot stamping parts</title>
    <parentTitle language="eng">CIRP Journal of Manufacturing Science and Technology</parentTitle>
    <identifier type="doi">10.1016/j.cirpj.2022.08.003</identifier>
    <identifier type="issn">1878-0016</identifier>
    <identifier type="issn">1755-5817</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Markus</firstName>
      <lastName>Hirtler</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Ismail</firstName>
      <lastName>Ünsal</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>22MnB5</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Directed Energy Deposition</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hardenability</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Critical cooling rate</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Dilatometry</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Boron nitride</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Mill scale</value>
    </subject>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>19692</id>
    <completedYear/>
    <publishedYear>2017</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>72</pageFirst>
    <pageLast>73</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>AKNET-PRess</publisherName>
    <publisherPlace>Krakow</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation>AGH University of Science and Technology, Krakow, Poland and Silesian University of Technology, Katowice, Poland</contributingCorporation>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2017-03-27</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Towards intelligent materials testing with reduced experimental effort for hot forming</title>
    <parentTitle language="eng">KomPlasTech 2017 : XXIV International Conference on Computer Methods in Materials Technology, January 15-18, 2017, Zakopane, Poland : book of abstracts</parentTitle>
    <identifier type="isbn">978-83-947091-0-5</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <editor>
      <firstName>Danuta</firstName>
      <lastName>Szeliga</lastName>
    </editor>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Muhammad</firstName>
      <lastName>Imran</lastName>
    </author>
    <editor>
      <firstName>Łukasz</firstName>
      <lastName>Rauch</lastName>
    </editor>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Sebastian</firstName>
      <lastName>Härtel</lastName>
    </author>
    <author>
      <firstName>Birgit</firstName>
      <lastName>Awiszus</lastName>
    </author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Intelligent materials testing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hot working</value>
    </subject>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>20599</id>
    <completedYear/>
    <publishedYear>2017</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1821</pageFirst>
    <pageLast>1826</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>207</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2017-11-22</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Towards virtual deformation dilatometry for the design of hot stamping process</title>
    <parentTitle language="eng">Procedia Engineering</parentTitle>
    <identifier type="doi">10.1016/j.proeng.2017.10.945</identifier>
    <identifier type="issn">1877-7058</identifier>
    <note>International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom</note>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Thawin</firstName>
      <lastName>Hart-Rawung</lastName>
    </author>
    <author>
      <firstName>Michael</firstName>
      <lastName>Lechner</lastName>
    </author>
    <author>
      <firstName>Marion</firstName>
      <lastName>Merklein</lastName>
    </author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hot Stamping</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Dilatometry test</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Autenite decomposition model</value>
    </subject>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>22406</id>
    <completedYear/>
    <publishedYear>2018</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject_ref</type>
    <publisherName>AIP Publishing</publisherName>
    <publisherPlace>Melville, New York</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-10-16</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Joining of aluminum sheet and glass fiber reinforced polymer using extruded pins</title>
    <parentTitle language="eng">Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018</parentTitle>
    <identifier type="isbn">978-0-7354-1663-5</identifier>
    <identifier type="doi">10.1063/1.5034881</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="UBICOseries">AIP conference proceedings ; 1960,1</enrichment>
    <enrichment key="Artikelnummer">050008</enrichment>
    <author>
      <firstName>Romina</firstName>
      <lastName>Conte</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Livan</firstName>
      <lastName>Fratini</lastName>
    </editor>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <editor>
      <firstName>Rosa</firstName>
      <lastName>Di Lorenzo</lastName>
    </editor>
    <author>
      <firstName>Giuseppina</firstName>
      <lastName>Ambrogio</lastName>
    </author>
    <editor>
      <firstName>Gianluca</firstName>
      <lastName>Buffa</lastName>
    </editor>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <editor>
      <firstName>Guiseppe</firstName>
      <lastName>Ingarao</lastName>
    </editor>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>22411</id>
    <completedYear/>
    <publishedYear>2018</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>96</pageFirst>
    <pageLast>107</pageLast>
    <pageNumber/>
    <edition/>
    <issue>1</issue>
    <volume>18</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-10-17</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Decomposition algorithm for tool path planning for wire-arc additive manufacturing</title>
    <parentTitle language="eng">Journal of Machine Engineering</parentTitle>
    <identifier type="doi">10.5604/01.3001.0010.8827</identifier>
    <identifier type="issn">1895-7595</identifier>
    <identifier type="issn">2391-8071</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <author>
      <firstName>Lam</firstName>
      <lastName>Nguyen</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>22909</id>
    <completedYear/>
    <publishedYear>2018</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>87</pageFirst>
    <pageLast>97</pageLast>
    <pageNumber/>
    <edition/>
    <issue>3</issue>
    <volume>18</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-12-18</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Extension of a phase transformation model for partial hardening in hot stamping</title>
    <parentTitle language="eng">Journal of Machine Engineering</parentTitle>
    <identifier type="issn">1895-7595</identifier>
    <identifier type="issn">2391-8071</identifier>
    <identifier type="doi">10.5604/01.3001.0012.4619</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <author>
      <firstName>Thawin</firstName>
      <lastName>Hart-Rawung</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>24891</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>15</pageNumber>
    <edition/>
    <issue/>
    <volume>Vol. 187</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2019-12-18</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Impact and damage behaviour of FRP-metal hybrid laminates made by the reinforcement of glass fibers on 22MnB5 metal surface</title>
    <parentTitle language="eng">Composites Science and Technology</parentTitle>
    <identifier type="doi">10.1016/j.compscitech.2019.107949</identifier>
    <identifier type="issn">1879-1050</identifier>
    <identifier type="issn">0266-3538</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="Artikelnummer">107949</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Venkateswaran</firstName>
      <lastName>Santhanakrishnan Balakrishnan</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Thawin</firstName>
      <lastName>Hart-Rawung</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Holger</firstName>
      <lastName>Seidlitz</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>24920</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>17</pageNumber>
    <edition/>
    <issue/>
    <volume>vol. 164</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-01-02</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Investigations on hole-flanging by paddle forming and a comparison with single point incremental forming</title>
    <parentTitle language="eng">International Journal of Mechanical Sciences</parentTitle>
    <identifier type="doi">10.1016/j.ijmecsci.2019.105143</identifier>
    <identifier type="issn">0020-7403</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="Artikelnummer">105143</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <author>
      <firstName>Lemopi Isidore</firstName>
      <lastName>Besong</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>24976</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>94</pageFirst>
    <pageLast>107</pageLast>
    <pageNumber/>
    <edition/>
    <issue>3</issue>
    <volume>Vol. 19</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-01-09</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Modeling and convergence analysis of directed energy deposition simulations with hybrid implicit / explicit and implicit solutions</title>
    <parentTitle language="eng">Journal of Machine Engineering</parentTitle>
    <identifier type="doi">10.5604/01.3001.0013.4086</identifier>
    <identifier type="issn">2391-8071</identifier>
    <identifier type="issn">1895-7595</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Rameez</firstName>
      <lastName>Israr</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>24978</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>331</pageFirst>
    <pageLast>337</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject_ref</type>
    <publisherName>Springer</publisherName>
    <publisherPlace>Cham</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-01-09</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Trajectory Optimization for Wire-Arc Additive Manufacturing</title>
    <parentTitle language="eng">Operations Research Proceedings 2018 ; selected papers of the Annual International Conference of the German Operations Research Society (GOR), Brussels, Belgium, September 12-14, 2018</parentTitle>
    <identifier type="isbn">978-3-030-18499-5</identifier>
    <identifier type="doi">10.1007/978-3-030-18500-8</identifier>
    <identifier type="isbn">978-3-030-18500-8</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="UBICOseries">Operations Research Proceedings book series</enrichment>
    <author>
      <firstName>Armin</firstName>
      <lastName>Fügenschuh</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Bernard</firstName>
      <lastName>Fortz</lastName>
    </editor>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <editor>
      <firstName>Martine</firstName>
      <lastName>Labbé</lastName>
    </editor>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="1307">FG Ingenieurmathematik und Numerik der Optimierung</collection>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>24994</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>83</pageFirst>
    <pageLast>98</pageLast>
    <pageNumber/>
    <edition/>
    <issue>2</issue>
    <volume>Vol. 19</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-01-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Paddle shape optimization for hole-flanging by paddle forming through the use of a predefined strain path in finite element analysis</title>
    <parentTitle language="eng">Journal of Machine Engineering</parentTitle>
    <identifier type="doi">10.5604/01.3001.0013.2226</identifier>
    <identifier type="issn">1895-7595</identifier>
    <identifier type="issn">2391-8071</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <author>
      <firstName>Lemopi Isidore</firstName>
      <lastName>Besong</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25004</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>19</pageNumber>
    <edition/>
    <issue>10</issue>
    <volume>12</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-01-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Integrated Forming and Surface Engineering of Disc Springs by Inducing Residual Stresses by Incremental Sheet Forming</title>
    <parentTitle language="eng">Materials</parentTitle>
    <identifier type="doi">10.3390/ma12101646</identifier>
    <identifier type="issn">1996-1944</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="Artikelnummer">1646</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <author>
      <firstName>Ramin</firstName>
      <lastName>Hajavifard</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Fawad</firstName>
      <lastName>Maqbool</lastName>
    </author>
    <author>
      <firstName>Anke</firstName>
      <lastName>Schmiedt-Kalenborn</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25960</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1520</pageFirst>
    <pageLast>1525</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>47</volume>
    <type>conferenceobject_ref</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">On the Numerical Prediction of Process-Dependent Properties of Current High-Performance Materials with Material Model *MAT_254 in LS-DYNA</title>
    <parentTitle language="eng">Procedia Manufacturing : 23rd International Conference on Material Forming</parentTitle>
    <identifier type="doi">10.1016/j.promfg.2020.04.341</identifier>
    <identifier type="issn">2351-9789</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Thomas</firstName>
      <lastName>Klöppel</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </editor>
    <author>
      <firstName>Mathias</firstName>
      <lastName>Merten</lastName>
    </author>
    <author>
      <firstName>Andre</firstName>
      <lastName>Haufe</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25974</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1123</pageFirst>
    <pageLast>1128</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>47</volume>
    <type>conferenceobject_ref</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Multi-bead Overlapping Models for Tool Path Generation in Wire-Arc Additive Manufacturing Processes</title>
    <parentTitle language="eng">Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming</parentTitle>
    <identifier type="issn">2351-9789</identifier>
    <identifier type="doi">10.1016/j.promfg.2020.04.129</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Lam</firstName>
      <lastName>Nguyen</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </editor>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25978</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>707</pageFirst>
    <pageLast>712</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>47</volume>
    <type>conferenceobject_ref</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">A Fast Approach for Optimization of Hot Stamping Based on Machine Learning of Phase Transformation Kinetics</title>
    <parentTitle language="eng">Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming</parentTitle>
    <identifier type="doi">10.1016/j.promfg.2020.04.218</identifier>
    <identifier type="issn">2351-9789</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Thawin</firstName>
      <lastName>Hart-Rawung</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </editor>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25982</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>17</pageNumber>
    <edition/>
    <issue/>
    <volume>Vol. 35</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-11</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Continuous Eulerian tool path strategies for wire-arc additive manufacturing of rib-web structures with machine-learning-based adaptive void filling</title>
    <parentTitle language="eng">Additive Manufacturing</parentTitle>
    <identifier type="doi">10.1016/j.addma.2020.101265</identifier>
    <identifier type="issn">2214-8604</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="Artikelnummer">101265</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Lam</firstName>
      <lastName>Nguyen</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>26050</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>5</pageFirst>
    <pageLast>16</pageLast>
    <pageNumber/>
    <edition/>
    <issue>1</issue>
    <volume>14</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-28</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling</title>
    <parentTitle language="eng">Production Engineering</parentTitle>
    <identifier type="doi">10.1007/s11740-019-00932-0</identifier>
    <identifier type="issn">1863-7353</identifier>
    <identifier type="issn">0944-6524</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Muhammad</firstName>
      <lastName>Imran</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <author>
      <firstName>Muhammad Junaid</firstName>
      <lastName>Afzal</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <author>
      <firstName>Anthony</firstName>
      <lastName>Dunlap</lastName>
    </author>
    <author>
      <firstName>Alexander</firstName>
      <lastName>Schwedt</lastName>
    </author>
    <author>
      <firstName>Anke</firstName>
      <lastName>Aretz</lastName>
    </author>
    <author>
      <firstName>Shuhan</firstName>
      <lastName>Wang</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Lohmar</lastName>
    </author>
    <author>
      <firstName>Gerhard</firstName>
      <lastName>Hirt</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25962</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1410</pageFirst>
    <pageLast>1415</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>47</volume>
    <type>conferenceobject_ref</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Modeling the Residual Stresses Induced in the Metastable Austenitic Stainless Steel Disc Springs manufactured by Incremental Sheet Forming by a Combined Hardening Model with Phase Transformation</title>
    <parentTitle language="eng">Procedia Manufacturing : Part of Special issue: 23rd International Conference on Material Forming</parentTitle>
    <identifier type="doi">10.1016/j.promfg.2020.04.300</identifier>
    <identifier type="issn">2351-9789</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Muhammad Junaid</firstName>
      <lastName>Afzal</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </editor>
    <author>
      <firstName>Fawad</firstName>
      <lastName>Maqbool</lastName>
    </author>
    <author>
      <firstName>Ramin</firstName>
      <lastName>Hajavifard</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Frank</firstName>
      <lastName>Walther</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25964</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1392</pageFirst>
    <pageLast>1398</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>47</volume>
    <type>conferenceobject_ref</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Development of Tool Paths for Multi-axis Single Stage Incremental Hole-flanging</title>
    <parentTitle language="eng">Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming</parentTitle>
    <identifier type="doi">10.1016/j.promfg.2020.04.290</identifier>
    <identifier type="issn">2351-9789</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Lemopi Isidore</firstName>
      <lastName>Besong</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </editor>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Ismail</firstName>
      <lastName>Ünsal</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <author>
      <firstName>Mitchel</firstName>
      <lastName>Polte</lastName>
    </author>
    <author>
      <firstName>Julian</firstName>
      <lastName>Blumberg</lastName>
    </author>
    <author>
      <firstName>Eckart</firstName>
      <lastName>Uhlmann</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25966</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1281</pageFirst>
    <pageLast>1287</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>47</volume>
    <type>conferenceobject_ref</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Hot Workability of a Spark Plasma Sintered Intermetallic Iron Aluminide Alloy Above and Below the Order-disorder Transition Temperature</title>
    <parentTitle language="eng">Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming</parentTitle>
    <identifier type="doi">10.1016/j.promfg.2020.04.238</identifier>
    <identifier type="issn">2351-9789</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Aliakbar</firstName>
      <lastName>Emdadi</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </editor>
    <author>
      <firstName>Irina</firstName>
      <lastName>Sizova</lastName>
    </author>
    <author>
      <firstName>Oleg</firstName>
      <lastName>Stryzhyboroda</lastName>
    </author>
    <author>
      <firstName>Ulrike</firstName>
      <lastName>Hecht</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25968</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1184</pageFirst>
    <pageLast>1189</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>47</volume>
    <type>conferenceobject_ref</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Numerical Analysis of Different Fixation Strategies in Direct Energy Deposition Processes</title>
    <parentTitle language="eng">Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming; edited by Markus Bambach</parentTitle>
    <identifier type="doi">10.1016/j.promfg.2020.04.145</identifier>
    <identifier type="issn">2351-9789</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Rameez</firstName>
      <lastName>Israr</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </editor>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25969</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1159</pageFirst>
    <pageLast>1163</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>47</volume>
    <type>conferenceobject_ref</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Mathematical Modeling and Optimization for Powder-Based Additive Manufacturing</title>
    <parentTitle language="eng">Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming</parentTitle>
    <identifier type="doi">10.1016/j.promfg.2020.04.158</identifier>
    <identifier type="issn">2351-9789</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <enrichment key="Fprofil">4 Künstliche Intelligenz und Sensorik / Artificial Intelligence and Sensor Technology</enrichment>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </editor>
    <author>
      <firstName>Armin</firstName>
      <lastName>Fügenschuh</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Felix</firstName>
      <lastName>Jensch</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Schmidt</lastName>
    </author>
    <collection role="institutes" number="1307">FG Ingenieurmathematik und Numerik der Optimierung</collection>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
  <doc>
    <id>25972</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1134</pageFirst>
    <pageLast>1140</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>47</volume>
    <type>conferenceobject_ref</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-09-10</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Rule-Based Path Identification for Direct Energy Deposition</title>
    <parentTitle language="eng">Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming</parentTitle>
    <identifier type="doi">10.1016/jpromfg.2020.04.133</identifier>
    <identifier type="issn">2351-9789</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Moein Pakdel</firstName>
      <lastName>Sefidi</lastName>
    </author>
    <submitter>
      <firstName>Renate</firstName>
      <lastName>Rapkow</lastName>
    </submitter>
    <editor>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </editor>
    <author>
      <firstName>Rameez</firstName>
      <lastName>Israr</lastName>
    </author>
    <author>
      <firstName>Johannes</firstName>
      <lastName>Buhl</lastName>
    </author>
    <author>
      <firstName>Markus</firstName>
      <lastName>Bambach</lastName>
    </author>
    <collection role="institutes" number="3405">FG Hybride Fertigung</collection>
  </doc>
</export-example>
