<?xml version="1.0" encoding="utf-8"?>
<export-example>
  <doc>
    <id>25114</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>594</pageFirst>
    <pageLast>605</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>787</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-01-20</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Microstructure, phase stability and element partitioning of γ/γʹ Co-9Al-9W-2X alloys in different annealing conditions</title>
    <parentTitle language="eng">Journal of Alloys and Compounds</parentTitle>
    <identifier type="issn">0925-8388</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Michael</firstName>
      <lastName>Oehring</lastName>
    </author>
    <author>
      <firstName>Yuzhi</firstName>
      <lastName>Li</lastName>
    </author>
    <author>
      <firstName>Lin</firstName>
      <lastName>Song</lastName>
    </author>
    <author>
      <firstName>Yon</firstName>
      <lastName>Liu</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Uwe</firstName>
      <lastName>Lorenz</lastName>
    </author>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>26843</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>9</pageNumber>
    <edition/>
    <issue/>
    <volume>819</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-01-24</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Temperature dependence of misfit in different Co–Al–W ternary alloys measured by synchrotron X-ray diffraction</title>
    <parentTitle language="eng">Journal of Alloys and Compounds</parentTitle>
    <identifier type="issn">0925-8388</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="Artikelnummer">152940</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Yuzhi</firstName>
      <lastName>Li</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <author>
      <firstName>Michael</firstName>
      <lastName>Oehring</lastName>
    </author>
    <author>
      <firstName>Jonathan</firstName>
      <lastName>Paul</lastName>
    </author>
    <author>
      <firstName>Uwe</firstName>
      <lastName>Lorenz</lastName>
    </author>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>11889</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>44</pageFirst>
    <pageLast>53</pageLast>
    <pageNumber/>
    <edition/>
    <issue>33</issue>
    <volume/>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation>Helmholtz-Zentrum Geesthacht</contributingCorporation>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2014-10-13</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Carbides in Ti-45Al-5Nb alloys with different carbon contents</title>
    <parentTitle language="eng">Intermetallics</parentTitle>
    <identifier type="issn">0966-9795</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <author>
      <firstName>Heike</firstName>
      <lastName>Gabrisch</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Frank-Peter</firstName>
      <lastName>Schimansky</lastName>
    </author>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <author>
      <firstName>Norbert</firstName>
      <lastName>Schell</lastName>
    </author>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <collection role="old_institute" number="03053">Professur Mikrostrukturelles Werkstoffdesign</collection>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>18098</id>
    <completedYear/>
    <publishedYear>2015</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>61</pageFirst>
    <pageLast>66</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>Curran</publisherName>
    <publisherPlace>Red Hook, NY</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2017-01-25</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Effects of Carbon Content, Annealing Condition and Internal Defects on the nucleation, growth and coarsening of P-type Carbides in High Niobium Containing TiAl Alloys</title>
    <parentTitle language="eng">Advanced structural and functional intermetallic-based alloys, November 30 - December 5, 2014, Boston, Massachusetts, USA</parentTitle>
    <identifier type="isbn">978-1-5108-0634-4</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="UBICOseries">Materials Research Society symposium proceedings ; 1760</enrichment>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <author>
      <firstName>Heike</firstName>
      <lastName>Gabrisch</lastName>
    </author>
    <author>
      <firstName>Uwe</firstName>
      <lastName>Lorenz</lastName>
    </author>
    <author>
      <firstName>Mathias</firstName>
      <lastName>Münch</lastName>
    </author>
    <author>
      <firstName>Frank-Peter</firstName>
      <lastName>Schimansky</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Schreyer</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>18108</id>
    <completedYear/>
    <publishedYear>2015</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>111</pageFirst>
    <pageLast>119</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>66</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2017-01-25</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Nucleation and thermal stability of carbide precipitates in high Nb containing TiAl alloys</title>
    <parentTitle language="eng">Intermetallics</parentTitle>
    <identifier type="doi">10.1016/j.intermet.2015.07.001</identifier>
    <identifier type="issn">0966-9795</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Heike</firstName>
      <lastName>Gabrisch</lastName>
    </author>
    <author>
      <firstName>Uwe</firstName>
      <lastName>Lorenz</lastName>
    </author>
    <author>
      <firstName>Frank-Peter</firstName>
      <lastName>Schimansky</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Schreyer</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>21254</id>
    <completedYear/>
    <publishedYear>2017</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>32</pageFirst>
    <pageLast>39</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>89</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-01-31</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of alloy composition and thermal history on carbide precipitation in γ-based TiAl alloys</title>
    <parentTitle language="eng">Intermetallics</parentTitle>
    <identifier type="issn">0966-9795</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Uwe</firstName>
      <lastName>Lorenz</lastName>
    </author>
    <author>
      <firstName>Mathias</firstName>
      <lastName>Münch</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>21262</id>
    <completedYear/>
    <publishedYear>2017</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>36</pageFirst>
    <pageLast>44</pageLast>
    <pageNumber/>
    <edition/>
    <issue>137</issue>
    <volume/>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2018-02-01</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Morphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloys</title>
    <parentTitle language="eng">Acta Materialia</parentTitle>
    <identifier type="issn">1359-6454</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Carolin</firstName>
      <lastName>Zenk</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Peter</firstName>
      <lastName>Felfer</lastName>
    </author>
    <author>
      <firstName>Heike</firstName>
      <lastName>Gabrisch</lastName>
    </author>
    <author>
      <firstName>Mathias</firstName>
      <lastName>Göken</lastName>
    </author>
    <author>
      <firstName>Uwe</firstName>
      <lastName>Lorenz</lastName>
    </author>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>23395</id>
    <completedYear/>
    <publishedYear>2018</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>70</pageFirst>
    <pageLast>76</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>100</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2019-01-25</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">New insights into perovskite-Ti3AlC precipitate splitting in a Ti-45Al-5Nb-0.75C alloy by transmission electron microscopy</title>
    <parentTitle language="eng">Intermetallics</parentTitle>
    <identifier type="doi">10.1016/j.intermet.2018.06.006</identifier>
    <identifier type="issn">0966-9795</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Michael</firstName>
      <lastName>Oehring</lastName>
    </author>
    <author>
      <firstName>Uwe</firstName>
      <lastName>Lorenz</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>25119</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>880</pageFirst>
    <pageLast>886</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>805</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-01-20</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Identification of Laves phases in a Zr or Hf containing γ-γ′ Co-base superalloy</title>
    <parentTitle language="eng">Journal of Alloys and Compounds</parentTitle>
    <identifier type="issn">0925-8388</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Lin</firstName>
      <lastName>Song</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Yong</firstName>
      <lastName>Liu</lastName>
    </author>
    <author>
      <firstName>Michael</firstName>
      <lastName>Oehring</lastName>
    </author>
    <author>
      <firstName>Uwe</firstName>
      <lastName>Lorenz</lastName>
    </author>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>25120</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>11</pageNumber>
    <edition/>
    <issue/>
    <volume>807</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-01-20</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Microstructure evolution and enhanced creep property of a high Nb containing TiAl alloy with carbon addition</title>
    <parentTitle language="eng">Journal of Alloys and Compounds</parentTitle>
    <identifier type="doi">10.1016/j.jallcom.2019.151649</identifier>
    <identifier type="issn">0925-8388</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="Artikelnummer">151649</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <author>
      <firstName>Lin</firstName>
      <lastName>Song</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Xingguo</firstName>
      <lastName>Hu</lastName>
    </author>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Daria V.</firstName>
      <lastName>Lazurenko</lastName>
    </author>
    <author>
      <firstName>Uwe</firstName>
      <lastName>Lorenz</lastName>
    </author>
    <author>
      <firstName>Junpin</firstName>
      <lastName>Lin</lastName>
    </author>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <author>
      <firstName>Tiebang</firstName>
      <lastName>Zhang</lastName>
    </author>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>26845</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>575</pageFirst>
    <pageLast>586</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>186</volume>
    <type>articler</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-01-24</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">New insights into high-temperature deformation and phase transformation mechanisms of lamellar structures in high Nb-containing TiAl alloys</title>
    <parentTitle language="eng">Acta Materialia</parentTitle>
    <identifier type="doi">10.1016/j.actamat.2020.01.021</identifier>
    <identifier type="issn">1873-2453</identifier>
    <identifier type="issn">1359-6454</identifier>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <author>
      <firstName>Lin</firstName>
      <lastName>Song</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Fritz</firstName>
      <lastName>Appel</lastName>
    </author>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <author>
      <firstName>Michael</firstName>
      <lastName>Oehring</lastName>
    </author>
    <author>
      <firstName>Xingguo</firstName>
      <lastName>Hu</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Junyang</firstName>
      <lastName>He</lastName>
    </author>
    <author>
      <firstName>Uwe</firstName>
      <lastName>Lorenz</lastName>
    </author>
    <author>
      <firstName>Tiebang</firstName>
      <lastName>Zhang</lastName>
    </author>
    <author>
      <firstName>Junpin</firstName>
      <lastName>Lin</lastName>
    </author>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
  <doc>
    <id>37166</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>13</pageLast>
    <pageNumber>13</pageNumber>
    <edition/>
    <issue/>
    <volume>286</volume>
    <type>articler</type>
    <publisherName>Elsevier BV</publisherName>
    <publisherPlace>Amsterdam</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2025-12-22</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Stress-induced orthorhombic O phase in TiAl alloys</title>
    <abstract language="eng">The orthorhombic O phase precipitation within the D019-α2 phase has attracted increasing attention recently in high Nb containing TiAl (high Nb-TiAl) alloys since the precipitation temperature is close to the expected service temperature of the alloys. In this study, in-situ synchrotron high energy X-ray diffraction (HEXRD) reveals that the O phase precipitates at 550 °C while it dissolves into the α2 phase at 750 °C during heat treatments. However, under external stress the O phase unexpectedly precipitates from α2 phase at 800 °C and even 900 °C. The O phase formation proceeds further in the presence of a critical stress promoted by internal stress accumulation in the α2 phase, whereas the reverse O→α2 phase transformation takes place when the internal stresses are relaxed. Additionally, it has been revealed that the O phase preferentially precipitates from specifically oriented α2 grains with one of their &lt;110&gt; directions aligned perpendicular and their 〈0001〉 directions rotated by an angle of 120° out of the external load axis. This α2 phase orientation facilitates the α2→O crystal transition during uniaxial compression. Transmission electron microscopy (TEM) study shows that stress-induced α2→O transformation is governed by small atomic shifts in the α2 lattice. In addition, the selective growth of certain O variants via shuffling along an [110]α2 direction is found to accommodate the external strain component in this direction.</abstract>
    <parentTitle language="eng">Acta materialia</parentTitle>
    <identifier type="doi">10.1016/j.actamat.2025.120751</identifier>
    <identifier type="issn">1359-6454</identifier>
    <enrichment key="Fprofil">1 Energiewende und Dekarbonisierung / Energy Transition and Decarbonisation</enrichment>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="opus_import_data">{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2025,11,30]],"date-time":"2025-11-30T08:52:17Z","timestamp":1764492737916,"version":"3.38.0"},"reference-count":49,"publisher":"Elsevier BV","license":[{"start":{"date-parts":[[2025,3,1]],"date-time":"2025-03-01T00:00:00Z","timestamp":1740787200000},"content-version":"tdm","delay-in-days":0,"URL":"https:\/\/www.elsevier.com\/tdm\/userlicense\/1.0\/"},{"start":{"date-parts":[[2025,3,1]],"date-time":"2025-03-01T00:00:00Z","timestamp":1740787200000},"content-version":"tdm","delay-in-days":0,"URL":"https:\/\/www.elsevier.com\/legal\/tdmrep-license"}],"funder":[{"DOI":"10.13039\/501100001809","name":"National Natural Science Foundation of China","doi-asserted-by":"publisher","id":[{"id":"10.13039\/501100001809","id-type":"DOI","asserted-by":"publisher"}]}],"content-domain":{"domain":["elsevier.com","sciencedirect.com"],"crossmark-restriction":true},"short-container-title":["Acta Materialia"],"published-print":{"date-parts":[[2025,3]]},"DOI":"10.1016\/j.actamat.2025.120751","type":"journal-article","created":{"date-parts":[[2025,1,17]],"date-time":"2025-01-17T03:46:00Z","timestamp":1737085560000},"page":"120751","update-policy":"https:\/\/doi.org\/10.1016\/elsevier_cm_policy","source":"Crossref","is-referenced-by-count":7,"special_numbering":"C","title":["Stress-induced orthorhombic O phase in TiAl alloys"],"prefix":"10.1016","volume":"286","author":[{"given":"Xu","family":"Liu","sequence":"first","affiliation":[]},{"ORCID":"https:\/\/orcid.org\/0000-0002-8579-2064","authenticated-orcid":false,"given":"Lin","family":"Song","sequence":"additional","affiliation":[]},{"given":"Florian","family":"Pyczak","sequence":"additional","affiliation":[]},{"ORCID":"https:\/\/orcid.org\/0000-0002-1249-7937","authenticated-orcid":false,"given":"Andreas","family":"Stark","sequence":"additional","affiliation":[]},{"ORCID":"https:\/\/orcid.org\/0000-0001-6404-9856","authenticated-orcid":false,"given":"Li","family":"Wang","sequence":"additional","affiliation":[]},{"given":"Xiang","family":"Guo","sequence":"additional","affiliation":[]},{"given":"Tiebang","family":"Zhang","sequence":"additional","affiliation":[]}],"member":"78","reference":[{"key":"10.1016\/j.actamat.2025.120751_bib0001","doi-asserted-by":"crossref","first-page":"871","DOI":"10.1016\/0001-6160(88)90141-1","article-title":"A new ordered orthorhombic phase in a Ti3Al-Nb alloy","volume":"36","author":"Banerjee","year":"1988","journal-title":"Acta Metall"},{"key":"10.1016\/j.actamat.2025.120751_bib0002","doi-asserted-by":"crossref","first-page":"135","DOI":"10.1016\/S0079-6425(97)00012-1","article-title":"The intermetallic Ti2AlNb","volume":"42","author":"Banerjee","year":"1997","journal-title":"Prog. Mater. Sci."},{"key":"10.1016\/j.actamat.2025.120751_bib0003","doi-asserted-by":"crossref","first-page":"388","DOI":"10.1134\/S0031918X07040114","article-title":"Microstructure and plastic deformation of orthorhombic titanium aluminides Ti2AlNb. IV. Formation of the transformation twins upon the \u03b12\u2192O Phase transformation","volume":"103","author":"Kazantseva","year":"2007","journal-title":"Phys. Met. Metallogr."},{"key":"10.1016\/j.actamat.2025.120751_bib0004","doi-asserted-by":"crossref","first-page":"1559","DOI":"10.1080\/01418619508243931","article-title":"Deformation of the O and \u03b12 phase in the Ti-Al-Nb system","volume":"72","author":"Banerjee","year":"1995","journal-title":"Philos. Mag. A"},{"key":"10.1016\/j.actamat.2025.120751_bib0005","doi-asserted-by":"crossref","first-page":"371","DOI":"10.1002\/adem.200600013","article-title":"Nano-scale design of TiAl alloys based on \u03b2-phase decomposition","volume":"8","author":"Appel","year":"2006","journal-title":"Adv. Eng. Mater."},{"key":"10.1016\/j.actamat.2025.120751_bib0006","doi-asserted-by":"crossref","first-page":"232","DOI":"10.1016\/j.msea.2007.08.095","article-title":"A novel in situ composite structure in TiAl alloys, Mater","volume":"493","author":"Appel","year":"2008","journal-title":"Sci. Eng. A"},{"key":"10.1016\/j.actamat.2025.120751_bib0007","doi-asserted-by":"crossref","first-page":"342","DOI":"10.1016\/j.msea.2008.08.047","article-title":"Phase transformations during creep of a multiphase TiAl-based alloy with a modulated microstructure","volume":"510-511","author":"Appel","year":"2009","journal-title":"Mater. Sci. Eng. A"},{"key":"10.1016\/j.actamat.2025.120751_bib0008","doi-asserted-by":"crossref","first-page":"305","DOI":"10.1016\/j.jallcom.2014.08.137","article-title":"B19 phase in Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y alloy","volume":"618","author":"Song","year":"2015","journal-title":"J. Alloys Compd."},{"key":"10.1016\/j.actamat.2025.120751_bib0009","doi-asserted-by":"crossref","first-page":"398","DOI":"10.1016\/j.matchar.2018.11.025","article-title":"Evidence of an orthorhombic transition phase in a Ti-44Al-3Mo (at.%) alloy using in-situ synchrotron diffraction and transmission electron microscopy","volume":"147","author":"Musi","year":"2019","journal-title":"Mater. Charact."},{"key":"10.1016\/j.actamat.2025.120751_bib0010","doi-asserted-by":"crossref","first-page":"2323","DOI":"10.1016\/0956-7151(94)90311-5","article-title":"Phase transformations in the (Ti, Al)3Nb section of the Ti-Al-Nb system- I. Microstructural predictions based on a subgroup relation between phases","volume":"42","author":"Bendersky","year":"1994","journal-title":"Acta Metall. Mater."},{"key":"10.1016\/j.actamat.2025.120751_bib0011","doi-asserted-by":"crossref","first-page":"343","DOI":"10.1016\/j.actamat.2016.09.030","article-title":"Orthorhombic phase formation in a Nb-rich \u03b3-TiAl based alloy - An in-situ synchrotron radiation investigation","volume":"121","author":"Rackel","year":"2016","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0012","doi-asserted-by":"crossref","first-page":"304","DOI":"10.1016\/j.actamat.2017.05.067","article-title":"Morphology and stability of orthorhombic and hexagonal phases in a lamellar \u03b3-Ti-42Al-8.5Nb alloy-A transmission electron microscopy study","volume":"135","author":"Gabrisch","year":"2017","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0013","doi-asserted-by":"crossref","DOI":"10.1016\/j.jallcom.2022.167578","article-title":"Impact of microstructure on elastic properties in the alloy Ti-42Al-8.5Nb","volume":"932","author":"Gabrisch","year":"2023","journal-title":"J. Alloys Compd."},{"key":"10.1016\/j.actamat.2025.120751_bib0014","doi-asserted-by":"crossref","first-page":"516","DOI":"10.1016\/j.actamat.2017.11.016","article-title":"High-resolution electron microscopy characterization of modulated structure in high Nb-containing lamellar \u03b3-TiAl alloy","volume":"144","author":"Ren","year":"2018","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0015","doi-asserted-by":"crossref","first-page":"215","DOI":"10.1016\/j.actamat.2018.11.041","article-title":"Formation and temporal evolution of modulated structure in high Nb-containing lamellar \u03b3-TiAl alloy","volume":"165","author":"Ren","year":"2019","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0016","doi-asserted-by":"crossref","DOI":"10.1016\/j.actamat.2021.117419","article-title":"Composition and temperature dependence of \u03b12 phase decomposition in high Nb-containing lamellar \u03b3-TiAl alloys: experiments and first-principles calculations","volume":"221","author":"Dai","year":"2021","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0017","doi-asserted-by":"crossref","first-page":"741","DOI":"10.4028\/www.scientific.net\/MSF.941.741","article-title":"Elemental segregation and O-Phase formation in a gamma-TiAl Alloy","volume":"941","author":"Gabrisch","year":"2018","journal-title":"Mater. Sci. Forum"},{"key":"10.1016\/j.actamat.2025.120751_bib0018","doi-asserted-by":"crossref","first-page":"175","DOI":"10.1016\/j.jallcom.2005.03.121","article-title":"Effect of forging on microstructure and tensile properties of Ti-45Al-(8-9)Nb-(W, B, Y) alloy","volume":"414","author":"Xu","year":"2006","journal-title":"J. Alloys Compd"},{"key":"10.1016\/j.actamat.2025.120751_bib0019","doi-asserted-by":"crossref","first-page":"403","DOI":"10.1016\/S0966-9795(02)00008-0","article-title":"On the origin of superior high strength of Ti-45Al-10Nb alloys","volume":"10","author":"Zhang","year":"2002","journal-title":"Intermetallics"},{"key":"10.1016\/j.actamat.2025.120751_bib0020","doi-asserted-by":"crossref","DOI":"10.1016\/j.intermet.2021.107086","article-title":"Screening for O phase in advanced \u03b3-TiAl alloys","volume":"131","author":"Rackel","year":"2021","journal-title":"Intermetallics"},{"key":"10.1016\/j.actamat.2025.120751_bib0021","doi-asserted-by":"crossref","first-page":"1999","DOI":"10.1016\/j.actamat.2006.11.004","article-title":"Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel","volume":"55","author":"Young","year":"2007","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0022","doi-asserted-by":"crossref","first-page":"767","DOI":"10.1016\/S1359-6462(02)00558-4","article-title":"Solidification structure in a cast \u03b3 alloy","volume":"48","author":"Singh","year":"2003","journal-title":"Scr. Mater."},{"key":"10.1016\/j.actamat.2025.120751_bib0023","doi-asserted-by":"crossref","first-page":"539","DOI":"10.1080\/01418619208201574","article-title":"Ordered domains in TiAl coexisting with Ti3Al in the lamellar structure of Ti-rich TiAl compounds","volume":"66","author":"Inui","year":"1992","journal-title":"Philos. Mag. A"},{"key":"10.1016\/j.actamat.2025.120751_bib0024","doi-asserted-by":"crossref","first-page":"1481","DOI":"10.1016\/S0036-9748(88)80024-3","article-title":"Twin relationship in TiAl","volume":"22","author":"Feng","year":"1988","journal-title":"Scr. Metall."},{"key":"10.1016\/j.actamat.2025.120751_bib0025","doi-asserted-by":"crossref","first-page":"110","DOI":"10.1016\/j.actamat.2018.10.042","article-title":"In situ and atomic-scale investigations of the early stages of \u03b3 precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution","volume":"164","author":"Erdely","year":"2019","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0026","doi-asserted-by":"crossref","first-page":"15683","DOI":"10.1103\/PhysRevB.60.15683","article-title":"Electronic structure, phase stability, and cohesive properties of Ti2XAl (X = Nb, V, Zr)","volume":"60","author":"Ravi","year":"1999","journal-title":"Phys. Rev. B"},{"key":"10.1016\/j.actamat.2025.120751_bib0027","doi-asserted-by":"crossref","DOI":"10.1103\/PhysRevB.68.054102","article-title":"Geometric and electronic structure of Ti2AlX (X = V, Nb, or Ta)","volume":"68","author":"Hu","year":"2003","journal-title":"Phys. Rev. B"},{"key":"10.1016\/j.actamat.2025.120751_bib0028","doi-asserted-by":"crossref","first-page":"3721","DOI":"10.1016\/j.actamat.2006.04.004","article-title":"Recrystallization and phase transitions in a \u03b3-TiAl-based alloy as observed by ex situ and in situ high-energy X-ray diffraction","volume":"54","author":"Liss","year":"2006","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0029","doi-asserted-by":"crossref","first-page":"11","DOI":"10.1016\/j.msea.2010.06.017","article-title":"Thermo-mechanical processing in a synchrotron beam","volume":"528","author":"Liss","year":"2010","journal-title":"Mater. Sci. Eng. A"},{"key":"10.1016\/j.actamat.2025.120751_bib0030","doi-asserted-by":"crossref","first-page":"193","DOI":"10.1016\/j.actamat.2018.07.062","article-title":"Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase \u03b3-TiAl based alloy","volume":"158","author":"Erdely","year":"2018","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0031","doi-asserted-by":"crossref","first-page":"31","DOI":"10.1016\/S1359-0286(00)00019-X","article-title":"Intergranular and interphase microstresses","volume":"5","author":"Dye","year":"2001","journal-title":"Curr. Opin. Solid State Mater."},{"key":"10.1016\/j.actamat.2025.120751_bib0032","doi-asserted-by":"crossref","first-page":"1155","DOI":"10.1016\/0956-7151(93)90163-M","article-title":"The role of ordered domains and slip mode of \u03b12 phase in the plastic behavior of TiAl crystals containing oriented lamellae","volume":"41","author":"Umakoshi","year":"1993","journal-title":"Acta Metall. Mater."},{"key":"10.1016\/j.actamat.2025.120751_bib0033","doi-asserted-by":"crossref","first-page":"811","DOI":"10.1016\/S1359-6462(97)00538-1","article-title":"Deformation behavior of \u03b12-lamellae in fully lamellar Ti-48Al-2Mn-2Nb at room temperature","volume":"38","author":"Wiezorek","year":"1998","journal-title":"Scr. Mater."},{"key":"10.1016\/j.actamat.2025.120751_bib0034","doi-asserted-by":"crossref","first-page":"2429","DOI":"10.1080\/14786430600606826","article-title":"The activation and the spreading of deformation in a fully lamellar Ti-47 at.% Al-1 at.% Cr-0.2 at.% Si alloy","volume":"86","author":"Singh","year":"2006","journal-title":"Philos. Mag."},{"key":"10.1016\/j.actamat.2025.120751_bib0035","doi-asserted-by":"crossref","first-page":"1131","DOI":"10.1016\/S1359-6454(99)00382-1","article-title":"The generation of intergranular strains in 309H stainless steel under uniaxial loading","volume":"48","author":"Pang","year":"2000","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0036","doi-asserted-by":"crossref","DOI":"10.1016\/j.msea.2019.138806","article-title":"Effect of initial microstructure on the micromechanical behavior of Ti-55531 titanium alloy investigated by in-situ high-energy X-ray diffraction","volume":"772","author":"Cui","year":"2020","journal-title":"Mater. Sci. Eng. A"},{"key":"10.1016\/j.actamat.2025.120751_bib0037","doi-asserted-by":"crossref","first-page":"1011","DOI":"10.1080\/01418619508236234","article-title":"The \u03b12-to-O transformation in Ti-Al-Nb alloys","volume":"71","author":"Muraleedharan","year":"1995","journal-title":"Philos. Mag. A"},{"key":"10.1016\/j.actamat.2025.120751_bib0038","doi-asserted-by":"crossref","first-page":"187","DOI":"10.1016\/0966-9795(95)98930-7","article-title":"Phase stability and ordering behavior of the O phase in Ti-Al-Nb alloys","volume":"3","author":"Muraleedharan","year":"1995","journal-title":"Intermetallics"},{"key":"10.1016\/j.actamat.2025.120751_bib0039","doi-asserted-by":"crossref","DOI":"10.1016\/j.scriptamat.2022.114841","article-title":"The crystal structure and transformations of the omicron phase \u039f in the Ti-Al-Nb system and on the ambiguity of its subvariants \u039f1 and \u039f2","volume":"219","author":"Xu","year":"2022","journal-title":"Scr. Mater."},{"key":"10.1016\/j.actamat.2025.120751_bib0040","doi-asserted-by":"crossref","first-page":"92","DOI":"10.1088\/0508-3443\/6\/3\/307","article-title":"Formulae for the transformation of indices in twinned crystals","volume":"6","author":"Andrews","year":"1955","journal-title":"Brit. J. Appl. Phys."},{"key":"10.1016\/j.actamat.2025.120751_bib0041","doi-asserted-by":"crossref","DOI":"10.1016\/j.actamat.2024.119917","article-title":"Revealing in situ stress-induced short- and medium-range atomic structure evolution in a multicomponent metallic glassy alloy","volume":"272","author":"Luo","year":"2024","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0042","doi-asserted-by":"crossref","first-page":"257","DOI":"10.1016\/j.actamat.2015.04.039","article-title":"Instability of cyclic superelastic deformation of NiTi investigated by synchrotron X-ray diffraction","volume":"94","author":"Sedmak","year":"2015","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0043","doi-asserted-by":"crossref","first-page":"12","DOI":"10.1016\/j.actamat.2017.02.014","article-title":"Reversible deformation-induced martensitic transformation in Al0.6CoCrFeNi high-entropy alloy investigated by in situ synchrotron-based high-energy X-ray diffraction","volume":"128","author":"Ma","year":"2017","journal-title":"Acta Mater"},{"key":"10.1016\/j.actamat.2025.120751_bib0044","doi-asserted-by":"crossref","first-page":"55","DOI":"10.1016\/j.pmatsci.2016.01.001","article-title":"Modeling concepts for intermetallic titanium aluminides","volume":"81","author":"Appel","year":"2016","journal-title":"Prog. Mater. Sci."},{"key":"10.1016\/j.actamat.2025.120751_bib0045","doi-asserted-by":"crossref","first-page":"241","DOI":"10.1016\/S0966-9795(98)00122-8","article-title":"The internal stress state in lamellar PST-crystals of the intermetallic alloy TiAl after compressive deformation","volume":"7","author":"Riemer","year":"1999","journal-title":"Intermetallics"},{"key":"10.1016\/j.actamat.2025.120751_bib0046","doi-asserted-by":"crossref","first-page":"17","DOI":"10.1016\/j.msea.2017.10.010","article-title":"The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys","volume":"709","author":"Appel","year":"2018","journal-title":"Mater. Sci. Eng. A"},{"key":"10.1016\/j.actamat.2025.120751_bib0047","doi-asserted-by":"crossref","first-page":"182","DOI":"10.1016\/S0921-5093(02)00243-5","article-title":"X-ray elastic constant determination and microstresses of \u03b12 phase of a two-phase TiAl-based intermetallic alloy","volume":"341","author":"Guo","year":"2003","journal-title":"Mater. Sci. Eng. A"},{"key":"10.1016\/j.actamat.2025.120751_bib0048","doi-asserted-by":"crossref","first-page":"212","DOI":"10.1016\/j.jmst.2023.04.027","article-title":"In-situ synchrotron high energy X-ray diffraction study on the internal strain evolution of the D019-\u03b12 phase during high-temperature compression and subsequent annealing in a TiAl alloy","volume":"163","author":"Liu","year":"2023","journal-title":"J. Mater. Sci. Technol."},{"key":"10.1016\/j.actamat.2025.120751_bib0049","doi-asserted-by":"crossref","first-page":"504","DOI":"10.1016\/j.actamat.2017.12.040","article-title":"Microstructure stability and micro-mechanical behavior of as-cast gamma-TiAl alloy during high-temperature low cycle fatigue","volume":"145","author":"Ding","year":"2018","journal-title":"Acta Mater"}],"container-title":["Acta Materialia"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/api.elsevier.com\/content\/article\/PII:S1359645425000448?httpAccept=text\/xml","content-type":"text\/xml","content-version":"vor","intended-application":"text-mining"},{"URL":"https:\/\/api.elsevier.com\/content\/article\/PII:S1359645425000448?httpAccept=text\/plain","content-type":"text\/plain","content-version":"vor","intended-application":"text-mining"}],"deposited":{"date-parts":[[2025,3,6]],"date-time":"2025-03-06T22:04:01Z","timestamp":1741298641000},"score":1,"resource":{"primary":{"URL":"https:\/\/linkinghub.elsevier.com\/retrieve\/pii\/S1359645425000448"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2025,3]]},"references-count":49,"alternative-id":["S1359645425000448"],"URL":"https:\/\/doi.org\/10.1016\/j.actamat.2025.120751","relation":{},"ISSN":["1359-6454"],"issn-type":[{"type":"print","value":"1359-6454"}],"subject":[],"published":{"date-parts":[[2025,3]]},"assertion":[{"value":"Elsevier","name":"publisher","label":"This article is maintained by"},{"value":"Stress-induced orthorhombic O phase in TiAl alloys","name":"articletitle","label":"Article Title"},{"value":"Acta Materialia","name":"journaltitle","label":"Journal Title"},{"value":"https:\/\/doi.org\/10.1016\/j.actamat.2025.120751","name":"articlelink","label":"CrossRef DOI link to publisher maintained version"},{"value":"article","name":"content_type","label":"Content Type"},{"value":"\u00a9 2025 Acta Materialia Inc. Published by Elsevier Inc. All rights are reserved, including those for text and data mining, AI training, and similar technologies.","name":"copyright","label":"Copyright"}],"article-number":"120751"}}</enrichment>
    <enrichment key="opus_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="local_crossrefLicence">https://www.elsevier.com/tdm/userlicense/1.0/</enrichment>
    <enrichment key="local_import_origin">crossref</enrichment>
    <enrichment key="local_doiImportPopulated">PersonAuthorFirstName_1,PersonAuthorLastName_1,PersonAuthorFirstName_2,PersonAuthorLastName_2,PersonAuthorIdentifierOrcid_2,PersonAuthorFirstName_3,PersonAuthorLastName_3,PersonAuthorFirstName_4,PersonAuthorLastName_4,PersonAuthorIdentifierOrcid_4,PersonAuthorFirstName_5,PersonAuthorLastName_5,PersonAuthorIdentifierOrcid_5,PersonAuthorFirstName_6,PersonAuthorLastName_6,PersonAuthorFirstName_7,PersonAuthorLastName_7,PublisherName,TitleMain_1,Language,TitleParent_1,ArticleNumber,Volume,PublishedYear,IdentifierIssn,Enrichmentlocal_crossrefLicence</enrichment>
    <enrichment key="BTU">an der BTU erstellt / created at BTU</enrichment>
    <enrichment key="Referiert">Beitrag ist referiert / Article peer-reviewed</enrichment>
    <enrichment key="opus.source">doi-import</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <author>
      <firstName>Xu</firstName>
      <lastName>Liu</lastName>
    </author>
    <submitter>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </submitter>
    <author>
      <firstName>Lin</firstName>
      <lastName>Song</lastName>
    </author>
    <author>
      <firstName>Florian</firstName>
      <lastName>Pyczak</lastName>
    </author>
    <author>
      <firstName>Andreas</firstName>
      <lastName>Stark</lastName>
    </author>
    <author>
      <firstName>Li</firstName>
      <lastName>Wang</lastName>
    </author>
    <author>
      <firstName>Xiang</firstName>
      <lastName>Guo</lastName>
    </author>
    <author>
      <firstName>Tiebang</firstName>
      <lastName>Zhang</lastName>
    </author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Titanium aluminides</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Phase transformation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Strain accumulation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Variant selection</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hot compression</value>
    </subject>
    <collection role="institutes" number="3421">FG Mikrostrukturelles Werkstoffdesign</collection>
  </doc>
</export-example>
