@misc{OehringStarkPauletal., author = {Oehring, Michael and Stark, Andreas and Paul, Jonathan David Heaton and Lippmann, Thomas and Pyczak, Florian}, title = {Microstructural refinement of boron-containing β-solidifying γ-titanium aluminide alloys through heat treatments in the β phase field}, series = {Intermetallics}, journal = {Intermetallics}, number = {32}, isbn = {0966-9795}, pages = {12 -- 20}, language = {en} } @misc{BauerNeumeierPyczaketal., author = {Bauer, A. and Neumeier, Steffen and Pyczak, Florian and Singer, Robert F. and G{\"o}ken, Mathias}, title = {Creep properties of different γ'- strengthened Co-base superalloys}, series = {Materials Science and Engineering A}, journal = {Materials Science and Engineering A}, number = {550}, issn = {1873-4936}, pages = {333 -- 341}, language = {en} } @misc{LimbergEbelPyczaketal., author = {Limberg, Wolfgang and Ebel, Thomas and Pyczak, Florian and Oehring, Michael and Schimansky, Frank-Peter}, title = {Influence of the sintering atmosphere on the mechanical properties of MIM-processed Ti 45Al 5Nb 0.2B 0.2C}, series = {Materials Science and Engineering A}, journal = {Materials Science and Engineering A}, number = {552}, pages = {323 -- 329}, language = {en} } @inproceedings{BauerNeumeierPyczaketal., author = {Bauer, Alexander and Neumeier, Steffen and Pyczak, Florian and G{\"o}ken, Mathias}, title = {Creep strength and microstructure of polycrystalline γ'-strengthened cobalt-base superalloys}, series = {Superalloys 2012, proceedings of the 12th International Symposium on Superalloys, held September 9-13, 2012 at Seven Springs Mountain Resort, Seven Springs, PA}, booktitle = {Superalloys 2012, proceedings of the 12th International Symposium on Superalloys, held September 9-13, 2012 at Seven Springs Mountain Resort, Seven Springs, PA}, editor = {Huron, Eric S. and Reed, Roger C. and Hardy, Mark C. and Mills, Michael J. and Montero, Rick E. and Portella, Pedro D. and Telesmann, Jack}, publisher = {Wiley [u.a.]}, address = {Hoboken, New Jersey}, isbn = {978-1-118-51643-0}, pages = {695 -- 703}, language = {en} } @misc{SchlofferIqbalGabrischetal., author = {Schloffer, Martin and Iqbal, Farasat and Gabrisch, Heike and Schwaighofer, Emanuel and Schimansky, Frank-Peter and Mayer, Svea and Stark, Andreas and Lippmann, Thomas and G{\"o}ken, Mathias and Pyczak, Florian and Clemens, Helmut}, title = {Microstructure development and hardness of a powder metallurgical multi phase gamma-TiAl based alloy}, series = {Intermetallics}, journal = {Intermetallics}, number = {22}, issn = {0966-9795}, doi = {10.1016/j.intermet.2011.11.015}, pages = {231 -- 240}, language = {en} } @misc{WangPyczakZhangetal., author = {Wang, Li and Pyczak, Florian and Zhang, Jian and Lou, Langhong and Singer, Robert F.}, title = {Effect of eutectics on plastic deformation and subsequent recrystallization in the single crystal nickel base superalloy CMSX-4}, series = {Materials Science and Engineering A}, journal = {Materials Science and Engineering A}, number = {532}, issn = {1873-4936}, pages = {487 -- 492}, language = {en} } @misc{ZhaoChangEbeletal., author = {Zhao, Dapeng and Chang, Keke and Ebel, Thomas and Quian, M. and Willumeit-R{\"o}mer, Regine and Yan, M. and Pyczak, Florian}, title = {Titanium carbide precipitation in Ti-22Nb alloy fabricated by metal injection moulding}, series = {Powder Metallurgy}, volume = {57}, journal = {Powder Metallurgy}, number = {1}, issn = {1743-2901}, pages = {2 -- 4}, language = {en} } @misc{ZhaoChangEbeletal., author = {Zhao, Dapeng and Chang, Keke and Ebel, Thomas and Quian, M. and Willumeit-R{\"o}mer, Regine and Yan, M. and Pyczak, Florian}, title = {Microstructure and mechanical behavior of metal injection molded Ti-Nb binary alloys as biomedical material}, series = {Journal of the Mechanical Behavior of Biomedical Materials}, journal = {Journal of the Mechanical Behavior of Biomedical Materials}, number = {28}, issn = {1878-0180}, pages = {171 -- 182}, language = {en} } @inproceedings{StarkSchwaighoferMayeretal., author = {Stark, Andreas and Schwaighofer, Emanuel and Mayer, Svea and Clemens, Helmut and Lippmann, Thomas and Lottermoser, Lars and Schreyer, Andreas and Pyczak, Florian}, title = {In situ high-energy XRD study of the hot-deformation behavior of a novel γ-TiAl alloy}, series = {Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A}, booktitle = {Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A}, publisher = {Cambridge Univ. Press}, address = {Cambridge}, doi = {10.1557/opl.2012.1577}, pages = {35 -- 40}, language = {en} } @misc{PyczakBauerGoekenetal., author = {Pyczak, Florian and Bauer, A. and G{\"o}ken, Mathias and Neumeier, Steffen and Lorenz, U. and Oehring, Michael and Schell, N. and Schreyer, Andreas and Stark, Andreas and Szymanzik, F.}, title = {Plastic Deformation Mechanisms in a Crept L12 hardened Co-Base Superalloy}, series = {Materials Science and Engineering A}, journal = {Materials Science and Engineering A}, number = {571}, issn = {1873-4936}, pages = {13 -- 18}, language = {en} } @misc{WeidnerPyczakBiermann, author = {Weidner, Anja and Pyczak, Florian and Biermann, H.}, title = {Scanning and transmission electron microscopy investigations of defect arrangements in a two-phase gamma-TiAl alloy}, series = {Materials Science and Engineering A}, journal = {Materials Science and Engineering A}, number = {571}, issn = {1873-4936}, pages = {49 -- 56}, language = {en} } @inproceedings{HauschildtStarkLorenzetal., author = {Hauschildt, Katja and Stark, Andreas and Lorenz, Uwe and Schell, Norbert and Fischer, Torben and Blankenburg, Malte and M{\"u}ller, Martin and Pyczak, Florian}, title = {Diffusion brazing of γ-TiAl-alloys: Investigations of the joint by electron microscopy and high-energy X-ray diffraction}, series = {Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A}, booktitle = {Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A}, publisher = {Cambridge Univ. Press}, address = {Cambridge}, doi = {10.1557/opl.2012.1750}, pages = {215 -- 220}, language = {en} } @misc{GabrischStarkSchimanskyetal., author = {Gabrisch, Heike and Stark, Andreas and Schimansky, Frank-Peter and Wang, Li and Schell, Norbert and Pyczak, Florian}, title = {Carbides in Ti-45Al-5Nb alloys with different carbon contents}, series = {Intermetallics}, journal = {Intermetallics}, number = {33}, issn = {0966-9795}, pages = {44 -- 53}, language = {en} } @inproceedings{GabrischLorenzOehringetal., author = {Gabrisch, Heike and Lorenz, Uwe and Oehring, Michael and Paul, Jonathan and Pyczak, Florian and Rackel, Marcus W. and Schimansky, Frank-Peter and Stark, Andreas}, title = {TiAlNb-alloy with a modulated B19 containing constituent produced by powder metallurgy}, series = {Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A}, booktitle = {Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A}, publisher = {Cambridge Univ. Press}, address = {Cambridge}, doi = {10.1557/opl.2012.1575}, pages = {35 -- 40}, language = {en} } @misc{EbelFerriLimbergetal., author = {Ebel, Thomas and Ferri, Orley Milagres and Limberg, Wolfgang and Oehring, Michael and Pyczak, Florian and Schimansky, Frank-Peter}, title = {Metal injection moulding of titanium and titanium-aluminides}, series = {Key Engineering Materials}, journal = {Key Engineering Materials}, number = {520}, issn = {1662-9795}, pages = {153 -- 160}, language = {en} } @misc{KainerEbelFerrietal., author = {Kainer, Karl Ulrich and Ebel, Thomas and Ferri, Orley Milagres and Limberg, Wolfgang and Pyczak, Florian and Schimansky, Frank-Peter}, title = {From titanium to magnesium: processing by advanced metal injection moulding}, series = {Powder Metallurgy}, volume = {55}, journal = {Powder Metallurgy}, number = {4}, pages = {315 -- 321}, language = {en} } @misc{LarrayozIzcaraBlankPyczaketal., author = {Larr{\´a}yoz Izcara, Xabier and Blank, Aharon and Pyczak, Florian and Staron, Peter and Schumann, Sandor and Huber, Norbert}, title = {Characterization and modeling of the influence of artificial aging on the microstructural evolution of age-hardenable AlSi10Mg(Cu)aluminum alloys}, series = {Materials Science and Engineering A}, journal = {Materials Science and Engineering A}, number = {610}, issn = {1873-4936}, pages = {46 -- 53}, language = {en} } @misc{ImayevGaisinGaisinaetal., author = {Imayev, V. and Gaisin, R. and Gaisina, E. and Imayev, R. and Hecht, H.-J. and Pyczak, Florian}, title = {Effect of hot forging on microstructure and tensile properties of Ti-TiB based composites produced by casting}, series = {Materials Science and Engineering A}, journal = {Materials Science and Engineering A}, number = {609}, isbn = {1873-4936}, pages = {34 -- 41}, language = {en} } @misc{LoeberSchimanskyKuehnetal., author = {L{\"o}ber, Lukas and Schimansky, Frank-Peter and K{\"u}hn, Uta and Pyczak, Florian and Eckert, J{\"u}rgen}, title = {Selective laser melting of a beta-solidifying TNMB1 titanium aluminide alloy}, series = {Journal Materials Processing Technology}, volume = {214}, journal = {Journal Materials Processing Technology}, number = {9}, issn = {0924-0136}, pages = {1852 -- 1860}, language = {en} } @misc{StarkOehringPyczaketal., author = {Stark, Andreas and Oehring, Michael and Pyczak, Florian and Lippmann, Thomas and Lottermoser, Lars and Schreyer, Andreas}, title = {The transformation mechanism of β phase to ω-related phases in Nb-rich γ-TiAl alloys studied by in situ high-energy X-ray diffraction}, series = {Materials Science Forum}, journal = {Materials Science Forum}, number = {772}, issn = {1662-9752}, pages = {85 -- 89}, language = {en} } @misc{JabbarMonchouxThomasetal., author = {Jabbar, Houria and Monchoux, Jean-Philippe and Thomas, Marc and Pyczak, Florian and Couret, Alain}, title = {Improvement of the creep properties of TiAl alloys densified by Spark Plasma Sintering}, series = {Intermetallics}, journal = {Intermetallics}, number = {46}, issn = {0966-9795}, pages = {1 -- 3}, language = {de} } @misc{SchlofferSchmoelzerMayeretal., author = {Schloffer, Martin and Schmoelzer, Thomas and Mayer, Svea and Schwaighofer, Emanuel and Hawranek, G. and Schimansky, Frank-Peter and Pyczak, Florian and Clemens, Helmut}, title = {The Characterisation of a Powder Metallurgically Manufactured TNM™ Titanium Aluminide Alloy Using Complimentary Quantitative Methods}, series = {Practical Metallography - Praktische Metallkunde}, volume = {48}, journal = {Practical Metallography - Praktische Metallkunde}, number = {11}, issn = {0032-678x}, doi = {10.3139/147.110138}, pages = {594 -- 604}, language = {en} }