@misc{PerezMaldonadoPerezBoschQuesadaetal., author = {Perez, Eduardo and Maldonado, David and Perez-Bosch Quesada, Emilio and Mahadevaiah, Mamathamba Kalishettyhalli and Jimenez-Molinos, Francisco and Wenger, Christian}, title = {Parameter Extraction Methods for Assessing Device-to-Device and Cycle-to-Cycle Variability of Memristive Devices at Wafer Scale}, series = {IEEE Transactions on Electron Devices}, volume = {70}, journal = {IEEE Transactions on Electron Devices}, number = {1}, issn = {0018-9383}, doi = {10.1109/TED.2022.3224886}, pages = {360 -- 365}, abstract = {The stochastic nature of the resistive switching (RS) process in memristive devices makes device-to-device (DTD) and cycle-to-cycle (CTC) variabilities relevant magnitudes to be quantified and modeled. To accomplish this aim, robust and reliable parameter extraction methods must be employed. In this work, four different extraction methods were used at the production level (over all the 108 devices integrated on 200-mm wafers manufactured in the IHP 130-nm CMOS technology) in order to obtain the corresponding collection of forming, reset, and set switching voltages. The statistical analysis of the experimental data (mean and standard deviation (SD) values) was plotted by using heat maps, which provide a good summary of the whole data at a glance and, in addition, an easy manner to detect inhomogeneities in the fabrication process.}, language = {en} } @misc{BaroniGlukhovPerezetal., author = {Baroni, Andrea and Glukhov, Artem and Perez, Eduardo and Wenger, Christian and Ielmini, Daniele and Olivo, Piero and Zambelli, Cristian}, title = {Low Conductance State Drift Characterization and Mitigation in Resistive Switching Memories (RRAM) for Artificial Neural Networks}, series = {IEEE Transactions on Device and Materials Reliability}, volume = {22}, journal = {IEEE Transactions on Device and Materials Reliability}, number = {3}, issn = {1530-4388}, doi = {10.1109/TDMR.2022.3182133}, pages = {340 -- 347}, abstract = {The crossbar structure of Resistive-switching random access memory (RRAM) arrays enabled the In-Memory Computing circuits paradigm, since they imply the native acceleration of a crucial operations in this scenario, namely the Matrix-Vector-Multiplication (MVM). However, RRAM arrays are affected by several issues materializing in conductance variations that might cause severe performance degradation. A critical one is related to the drift of the low conductance states appearing immediately at the end of program and verify algorithms that are mandatory for an accurate multi-level conductance operation. In this work, we analyze the benefits of a new programming algorithm that embodies Set and Reset switching operations to achieve better conductance control and lower variability. Data retention analysis performed with different temperatures for 168 hours evidence its superior performance with respect to standard programming approach. Finally, we explored the benefits of using our methodology at a higher abstraction level, through the simulation of an Artificial Neural Network for image recognition task (MNIST dataset). The accuracy achieved shows higher performance stability over temperature and time.}, language = {en} } @misc{FranckDabrowskiSchubertetal., author = {Franck, Max and Dabrowski, Jaroslaw and Schubert, Markus Andreas and Wenger, Christian and Lukosius, Mindaugas}, title = {Towards the Growth of Hexagonal Boron Nitride on Ge(001)/Si Substrates by Chemical Vapor Deposition}, series = {Nanomaterials}, volume = {12}, journal = {Nanomaterials}, number = {19}, issn = {2079-4991}, doi = {10.3390/nano12193260}, abstract = {The growth of hexagonal boron nitride (hBN) on epitaxial Ge(001)/Si substrates via high-vacuum chemical vapor deposition from borazine is investigated for the first time in a systematic manner. The influences of the process pressure and growth temperature in the range of 10-7-10-3 mbar and 900-980 °C, respectively, are evaluated with respect to morphology, growth rate, and crystalline quality of the hBN films. At 900 °C, nanocrystalline hBN films with a lateral crystallite size of ~2-3 nm are obtained and confirmed by high-resolution transmission electron microscopy images. X-ray photoelectron spectroscopy confirms an atomic N:B ratio of 1 ± 0.1. A three-dimensional growth mode is observed by atomic force microscopy. Increasing the process pressure in the reactor mainly affects the growth rate, with only slight effects on crystalline quality and none on the principle growth mode. Growth of hBN at 980 °C increases the average crystallite size and leads to the formation of 3-10 well-oriented, vertically stacked layers of hBN on the Ge surface. Exploratory ab initio density functional theory simulations indicate that hBN edges are saturated by hydrogen, and it is proposed that partial de-saturation by H radicals produced on hot parts of the set-up is responsible for the growth}, language = {en} } @misc{StrobelAlvaradoChavarinWengeretal., author = {Strobel, Carsten and Alvarado Chavarin, Carlos and Wenger, Christian and Albert, Matthias and Mikolajick, Thomas}, title = {Vertical Graphene-Based Transistors for Power Electronics, Optoelectronics and Radio-Frequency Applications}, series = {IEEE Nanotechnology Materials and Devices Conference (NMDC), Paestum, Italy, 22-25 October 2023}, journal = {IEEE Nanotechnology Materials and Devices Conference (NMDC), Paestum, Italy, 22-25 October 2023}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, isbn = {979-8-3503-3546-0}, issn = {2473-0718}, doi = {10.1109/NMDC57951.2023.10344102}, pages = {196 -- 201}, abstract = {The combination of two-dimensional materials, such as graphene, with established thin films offers great opportunities for enabling next-generation vertical transistors for various applications. This paper gives a brief overview about different vertical transistor concepts using twodimensional materials proposed so far, e.g. the hot electron transistor and the Barristor. With the arrival of twodimensional materials, the hot electron transistor also experienced a revival with predicted cut-off frequencies in the THz range. The Barristor overcomes the weak current saturation of lateral graphene field-effect transistors and high on-off ratios up to 107 were demonstrated, which are suitable parameters for logic applications. By combining a semiconductor-graphene-semiconductor design of the simplest hot electron transistor with the Barristor operating principle a new device, called graphene adjustable-barriers transistor, can be realized. This new device concept provides the potential for RF, power electronics, and optoelectronic applications.}, language = {en} } @misc{StankeWengerBieretal., author = {Stanke, Sandra and Wenger, Christian and Bier, Frank F. and H{\"o}lzel, Ralph}, title = {AC electrokinetic immobilization of influenza virus}, series = {Electrophoresis}, volume = {43}, journal = {Electrophoresis}, number = {12}, issn = {1522-2683}, doi = {10.1002/elps.202100324}, pages = {1309 -- 1321}, abstract = {The use of alternating current (AC) electrokinetic forces, like dielectrophoresis and AC electroosmosis, as a simple and fast method to immobilize sub-micrometer objects onto nanoelectrode arrays is presented. Due to its medical relevance, the influenza virus is chosen as a model organism. One of the outstanding features is that the immobilization of viral material to the electrodes can be achieved permanently, allowing subsequent handling independently from the electrical setup. Thus, by using merely electric fields, we demonstrate that the need of prior chemical surface modification could become obsolete. The accumulation of viral material over time is observed by fluorescence microscopy. The influences of side effects like electrothermal fluid flow, causing a fluid motion above the electrodes and causing an intensity gradient within the electrode array, are discussed. Due to the improved resolution by combining fluorescence microscopy with deconvolution, it is shown that the viral material is mainly drawn to the electrode edge and to a lesser extent to the electrode surface. Finally, areas of application for this functionalization technique are presented.}, language = {en} } @misc{PerezBoschQuesadaRizziGuptaetal., author = {Perez-Bosch Quesada, Emilio and Rizzi, Tommaso and Gupta, Aditya and Mahadevaiah, Mamathamba Kalishettyhalli and Schubert, Andreas and Pechmann, Stefan and Jia, Ruolan and Uhlmann, Max and Hagelauer, Amelie and Wenger, Christian and Perez, Eduardo}, title = {Multi-Level Programming on Radiation-Hard 1T1R Memristive Devices for In-Memory Computing}, series = {14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023}, journal = {14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, isbn = {979-8-3503-0240-0}, doi = {10.1109/CDE58627.2023.10339525}, pages = {4}, abstract = {This work presents a quasi-static electrical characterization of 1-transistor-1-resistor memristive structures designed following hardness-by-design techniques integrated in the CMOS fabrication process to assure multi-level capabilities in harsh radiation environments. Modulating the gate voltage of the enclosed layout transistor connected in series with the memristive device, it was possible to achieve excellent switching capabilities from a single high resistance state to a total of eight different low resistance states (more than 3 bits). Thus, the fabricated devices are suitable for their integration in larger in-memory computing systems and in multi-level memory applications. Index Terms—radiation-hard, hardness-by-design, memristive devices, Enclosed Layout Transistor, in-memory computing}, language = {en} } @misc{SuetbasNgWesseletal., author = {S{\"u}tbas, Batuhan and Ng, Herman Jalli and Wessel, Jan and K{\"o}lpin, Alexander and Kahmen, Gerhard}, title = {A V-band Low-Power and Compact Down-Conversion Mixer with Low LO Power in 130-nm SiGe BiCMOS Technology}, series = {16th European Microwave Integrated Circuits Conference (EuMIC), 03-04 April 2022, London, United Kingdom}, journal = {16th European Microwave Integrated Circuits Conference (EuMIC), 03-04 April 2022, London, United Kingdom}, doi = {10.23919/EuMIC50153.2022.9783953}, pages = {4}, language = {en} } @misc{ZahariPerezMahadevaiahetal., author = {Zahari, Finn and Perez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Kohlstedt, Hermann and Wenger, Christian and Ziegler, Martin}, title = {Analogue pattern recognition with stochastic switching binary CMOS‑integrated memristive devices}, series = {Scientific Reports}, volume = {10}, journal = {Scientific Reports}, issn = {2045-2322}, doi = {10.1038/s41598-020-71334-x}, pages = {15}, abstract = {Biological neural networks outperform todays computer technology in terms of power consumption and computing speed when associative tasks, like pattern recognition, are to be solved. The analogue and massive parallel in-memory computing in biology differs strongly with conventional transistor electronics using the von Neumann architecture. Therefore, novel bio-inspired computing architectures are recently highly investigated in the area of neuromorphic computing. Here, memristive devices, which serve as non-volatile resistive memory, are used to emulate the plastic behaviour of biological synapses. In particular, CMOS integrated resistive random access memory (RRAM) devices are promising candidates to extend conventional CMOS technology in neuromorphic systems. However, dealing with the inherent stochasticity of the resistive switching effect can be challenging for network performance. In this work, the probabilistic switching is exploited to emulate stochastic plasticity with fully CMOS integrated binary RRAM devices. Two different RRAM technologies with different device variabilities are investigated in detail and their use in a stochastic artificial neural network (StochANN) to solve the MINST pattern recognition task is examined. A mixed-signal implementation with hardware synapses and software neurons as well as numerical simulations show the proposed concept of stochastic computing is able to handle analogue data with binary memory cells.}, language = {en} } @misc{ZanottiPuglisiMiloetal., author = {Zanotti, Tommaso and Puglisi, Francesco Maria and Milo, Valerio and Perez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Ossorio, {\´O}scar G. and Wenger, Christian and Pavan, Paolo and Olivo, Piero and Ielmini, Daniele}, title = {Reliability of Logic-in-Memory Circuits in Resistive Memory Arrays}, series = {IEEE Transactions on Electron Devices}, volume = {67}, journal = {IEEE Transactions on Electron Devices}, number = {11}, issn = {0018-9383}, doi = {10.1109/TED.2020.3025271}, pages = {4611 -- 4615}, abstract = {Logic-in-memory (LiM) circuits based on resistive random access memory (RRAM) devices and the material implication logic are promising candidates for the development of low-power computing devices that could fulfill the growing demand of distributed computing systems. However, these circuits are affected by many reliability challenges that arise from device nonidealities (e.g., variability) and the characteristics of the employed circuit architecture. Thus, an accurate investigation of the variability at the array level is needed to evaluate the reliability and performance of such circuit architectures. In this work, we explore the reliability and performance of smart IMPLY (SIMPLY) (i.e., a recently proposed LiM architecture with improved reliability and performance) on two 4-kb RRAM arrays based on different resistive switching oxides integrated in the back end of line (BEOL) of the 0.25- μm BiCMOS process. We analyze the tradeoff between reliability and energy consumption of SIMPLY architecture by exploiting the results of an extensive array-level variability characterization of the two technologies. Finally, we study the worst case performance of a full adder implemented with the SIMPLY architecture and benchmark it on the analogous CMOS implementation.}, language = {en} } @misc{RomeroZalizPerezJimenezMolinosetal., author = {Romero-Zaliz, Roc{\´i}o and Perez, Eduardo and Jimenez-Molinos, Francisco and Wenger, Christian and Roldan, Juan Bautista}, title = {Study of Quantized Hardware Deep Neural Networks Based on Resistive Switching Devices, Conventional versus Convolutional Approaches}, series = {Electronics (MDPI)}, volume = {10}, journal = {Electronics (MDPI)}, number = {3}, issn = {2079-9292}, doi = {10.3390/electronics10030346}, pages = {14}, abstract = {A comprehensive analysis of two types of artificial neural networks (ANN) is performed to assess the influence of quantization on the synaptic weights. Conventional multilayer-perceptron (MLP) and convolutional neural networks (CNN) have been considered by changing their features in the training and inference contexts, such as number of levels in the quantization process, the number of hidden layers on the network topology, the number of neurons per hidden layer, the image databases, the number of convolutional layers, etc. A reference technology based on 1T1R structures with bipolar memristors including HfO2 dielectrics was employed, accounting for different multilevel schemes and the corresponding conductance quantization algorithms. The accuracy of the image recognition processes was studied in depth. This type of studies are essential prior to hardware implementation of neural networks. The obtained results support the use of CNNs for image domains. This is linked to the role played by convolutional layers at extracting image features and reducing the data complexity. In this case, the number of synaptic weights can be reduced in comparison to conventional MLPs.}, language = {en} }