@misc{SoltaniZarrinRockendorfWenger, author = {Soltani Zarrin, Pouya and Rockendorf, Niels and Wenger, Christian}, title = {In-Vitro Classification of Saliva Samples of COPD Patients and Healthy Controls Using Machine Learning Tools}, series = {IEEE Access}, volume = {Vol. 8}, journal = {IEEE Access}, issn = {2169-3536}, doi = {10.1109/ACCESS.2020.3023971}, pages = {168053 -- 168060}, abstract = {Chronic Obstructive Pulmonary Disease (COPD) is a life-threatening lung disease and a major cause of morbidity and mortality worldwide. Although a curative therapy has yet to be found, permanent monitoring of biomarkers that reflect the disease progression plays a pivotal role for the effective management of COPD. The accurate examination of respiratory tract fluids like saliva is a promising approach for staging the disease and predicting its upcoming exacerbations in a Point-of-Care (PoC) environment. Nonetheless, this approach is only feasible by concurrent consideration of patients' demographic and medical parameters. Therefore, Machine Learning (ML) tools are necessary for the comprehensive recognition of COPD in a PoC setting. As a result, the objective of this work was to implement ML tools on the data acquired from characterizing saliva samples of COPD patients and healthy controls for classification purposes. First, a permittivity biosensor was used to characterize dielectric properties of saliva samples and, subsequently, ML tools were applied on the acquired data for classification. The XGBoost gradient boosting algorithm provided a high classification accuracy of 91.25\%, making it a promising model for COPD recognition. Integration of this model on a neuromorphic chip, in the future, will enable the real-time detection of COPD in PoC, with low energy consumption and high patient privacy.}, language = {en} } @misc{BogunPerezBoschQuesadaPerezetal., author = {Bogun, Nicolas and Perez-Bosch Quesada, Emilio and Perez, Eduardo and Wenger, Christian and Kloes, Alexander and Schwarz, Mike}, title = {Analytical Calculation of Inference in Memristor-based Stochastic Artificial Neural Networks}, series = {29th International Conference on Mixed Design of Integrated Circuits and System (MIXDES), 23-24 June 2022 , Wrocław, Poland}, journal = {29th International Conference on Mixed Design of Integrated Circuits and System (MIXDES), 23-24 June 2022 , Wrocław, Poland}, isbn = {978-83-63578-22-0}, doi = {10.23919/MIXDES55591.2022.9838321}, pages = {83 -- 88}, abstract = {The impact of artificial intelligence on human life has increased significantly in recent years. However, as the complexity of problems rose aswell, increasing system features for such amount of data computation became troublesome due to the von Neumann's computer architecture. Neuromorphic computing aims to solve this problem by mimicking the parallel computation of a human brain. For this approach, memristive devices are used to emulate the synapses of a human brain. Yet, common simulations of hardware based networks require time consuming Monte-Carlo simulations to take into account the stochastic switching of memristive devices. This work presents an alternative concept making use of the convolution of the probability distribution functions (PDF) of memristor currents by its equivalent multiplication in Fourier domain. An artificial neural network is accordingly implemented to perform the inference stage with handwritten digits.}, language = {en} } @misc{SoltaniZarrinZahariMahadevaiahetal., author = {Soltani Zarrin, Pouya and Zahari, Finn and Mahadevaiah, Mamathamba Kalishettyhalli and Perez, Eduardo and Kohlstedt, Hermann and Wenger, Christian}, title = {Neuromorphic on‑chip recognition of saliva samples of COPD and healthy controls using memristive devices}, series = {Scientific Reports}, volume = {10}, journal = {Scientific Reports}, issn = {2045-2322}, doi = {10.1038/s41598-020-76823-7}, abstract = {Chronic Obstructive Pulmonary Disease (COPD) is a life-threatening lung disease, affecting millions of people worldwide. Implementation of Machine Learning (ML) techniques is crucial for the effective management of COPD in home-care environments. However, shortcomings of cloud-based ML tools in terms of data safety and energy efficiency limit their integration with low-power medical devices. To address this, energy efficient neuromorphic platforms can be used for the hardware-based implementation of ML methods. Therefore, a memristive neuromorphic platform is presented in this paper for the on-chip recognition of saliva samples of COPD patients and healthy controls. The results of its performance evaluations showed that the digital neuromorphic chip is capable of recognizing unseen COPD samples with accuracy and sensitivity values of 89\% and 86\%, respectively. Integration of this technology into personalized healthcare devices will enable the better management of chronic diseases such as COPD.}, language = {en} } @misc{PerezMaldonadoAcaletal., author = {Perez, Eduardo and Maldonado, David and Acal, Christian and Ruiz-Castro, Juan Eloy and Aguilera, Ana Mar{\´i}a and Jimenez-Molinos, Francisco and Roldan, Juan Bautista and Wenger, Christian}, title = {Advanced Temperature Dependent Statistical Analysis of Forming Voltage Distributions for Three Different HfO2-Based RRAM Technologies}, series = {Solid State Electronics}, volume = {176}, journal = {Solid State Electronics}, issn = {0038-1101}, pages = {6}, abstract = {In this work, voltage distributions of forming operations are analyzed by using an advanced statistical approach based on phase-type distributions (PHD). The experimental data were collected from batches of 128 HfO2-based RRAM devices integrated in 4-kbit arrays. Three di erent switching oxides, namely, polycrystalline HfO2, amorphous HfO2, and Al-doped HfO2, were tested in the temperature range from -40 to 150 oC. The variability of forming voltages has been usually studied by using the Weibull distribution (WD). However, the performance of the PHD analysis demonstrated its ability to better model this crucial operation. The capacity of the PHD to reproduce the experimental data has been validated by means of the Kolmogorov-Smirnov test, while the WD failed in many of the cases studied. In addition, PHD allows to extract information about intermediate probabilistic states that occur in the forming process and the transition probabilities between them; in this manner, we can deepen on the conductive lament formation physics. In particular, the number of intermediate states can be related to the device variability.}, language = {en} } @misc{LukosiusLukoseLiskeretal., author = {Lukosius, Mindaugas and Lukose, Rasuolė and Lisker, Marco and Luongo, G. and Elviretti, M. and Mai, Andreas and Wenger, Christian}, title = {Graphene Research in 200 mm CMOS Pilot Line}, series = {45th Jubilee International Convention on Information, Communication and Electronic Technology (MIPRO), 2022}, journal = {45th Jubilee International Convention on Information, Communication and Electronic Technology (MIPRO), 2022}, isbn = {978-953-233-103-5}, issn = {2623-8764}, doi = {10.23919/MIPRO55190.2022.9803362}, pages = {113 -- 117}, abstract = {Due to the unique electronic structures, graphene and other 2D Materials are considered as materials which can enable and extend the functionalities and performance in a large variety of applications, among them in microelectronics. At this point, the investigation and preparation of graphene devices in conditions resembling as close as possible the Si technology environment is of highest importance.Towards these goals, this paper focuses on the full spectra of graphene research aspects in 200mm pilot line. We investigated different process module developments such as CMOS compatible growth of high quality graphene on germanium and its growth mechanisms, transfer related challenges on target substrates, patterning, passivation and various concepts of contacting of graphene on a full 200 mm wafers. Finally, we fabricated proof-of-concept test structures e.g. TLM, Hall bars and capacitor structures to prove the feasibility of graphene processing in the pilot line of IHP.}, language = {en} } @misc{BaroniZambelliOlivoetal., author = {Baroni, Andrea and Zambelli, Cristian and Olivo, Piero and Perez, Eduardo and Wenger, Christian and Ielmini, Daniele}, title = {Tackling the Low Conductance State Drift through Incremental Reset and Verify in RRAM Arrays}, series = {2021 IEEE International Integrated Reliability Workshop (IIRW), South Lake Tahoe, CA, USA, 10 December 2021}, journal = {2021 IEEE International Integrated Reliability Workshop (IIRW), South Lake Tahoe, CA, USA, 10 December 2021}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, isbn = {978-1-6654-1794-5}, issn = {2374-8036}, doi = {10.1109/IIRW53245.2021.9635613}, pages = {5}, abstract = {Resistive switching memory (RRAM) is a promising technology for highly efficient computing scenarios. RRAM arrays enabled the acceleration of neural networks for artificial intelligence and the creation of In-Memory Computing circuits. However, the arrays are affected by several issues materializing in conductance variations that might cause severe performance degradation in those applications. Among those, one is related to the drift of the low conductance states appearing immediately at the end of program and verify algorithms that are fundamental for an accurate Multi-level conductance operation. In this work, we tackle the issue by developing an Incremental Reset and Verify technique showing enhanced variability and reliability features compared with a traditional refresh-based approach.}, language = {en} } @misc{MiloAnzaloneZambellietal., author = {Milo, Valerio and Anzalone, Francesco and Zambelli, Cristian and Perez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Ossorio, {\´O}scar G. and Olivo, Piero and Wenger, Christian and Ielmini, Daniele}, title = {Optimized programming algorithms for multilevel RRAM in hardware neural networks}, series = {IEEE International Reliability Physics Symposium (IRPS), 2021}, journal = {IEEE International Reliability Physics Symposium (IRPS), 2021}, isbn = {978-1-7281-6894-4}, issn = {1938-1891}, doi = {10.1109/IRPS46558.2021.9405119}, abstract = {A key requirement for RRAM in neural network accelerators with a large number of synaptic parameters is the multilevel programming. This is hindered by resistance imprecision due to cycle-to-cycle and device-to-device variations. Here, we compare two multilevel programming algorithms to minimize resistance variations in a 4-kbit array of HfO 2 RRAM. We show that gate-based algorithms have the highest reliability. The optimized scheme is used to implement a neural network with 9-level weights, achieving 91.5\% (vs. software 93.27\%) in MNIST recognition.}, language = {en} } @misc{StrobelAlvaradoChavarinVoelkeletal., author = {Strobel, Carsten and Alvarado Chavarin, Carlos and V{\"o}lkel, Sandra and Jahn, Andreas and Hiess, Andre and Knaut, Martin and Albert, Matthias and Wenger, Christian and Steinke, Olaff and Stephan, Ulf and R{\"o}hlecke, S{\"o}ren and Mikolajick, Thomas}, title = {Enhanced Electrical Properties of Optimized Vertical Graphene-Base Hot Electron Transistors}, series = {ACS Applied Electronic Materials}, volume = {5}, journal = {ACS Applied Electronic Materials}, number = {3}, issn = {2637-6113}, doi = {10.1021/acsaelm.2c01725}, pages = {1670 -- 1675}, abstract = {The arrival of high-mobility two-dimensional materials like graphene leads to the renaissance of former vertical semiconductor-metal-semiconductor (SMS) hot electron transistors. Because of the monolayer thickness of graphene, improved SMS transistors with a semimetallic graphene-base electrode are now feasible for high-frequency applications. In this study we report about a device that consists of amorphous silicon, graphene, and crystalline silicon. For the first time, this device is fabricated by a four-mask lithography process which leads to significant improvements in the device performance. A strongly increased common-emitter current gain of 2\% could be achieved while the on-off ratio improved to 1.6 × 105, which is already higher than predicted theoretically. This could be mainly attributed to better interface characteristics and decreased lateral dimensions of the devices. A cutoff frequency of approximately 26 MHz could be forecasted based on the DC measurements of the device.}, language = {en} } @misc{MaiMarschmeyerPeczeketal., author = {Mai, Christian and Marschmeyer, Steffen and Peczek, Anna and Kroh, Aleksandra and Jose, Josmy and Reiter, Sebastian and Fischer, Inga Anita and Wenger, Christian and Mai, Andreas}, title = {Integration Aspects of Plasmonic TiN-based Nano-Hole-Arrays on Ge Photodetectorsin a 200mm Wafer CMOS Compatible Silicon Technology}, series = {ECS Transactions}, volume = {109}, journal = {ECS Transactions}, number = {4}, issn = {1938-5862}, doi = {10.1149/10904.0035ecst}, pages = {35 -- 46}, abstract = {In this work we present the progress in regard to the integration of a surface plasmon resonance refractive index sensor into a CMOS compatible 200 mm wafer silicon-based technology. Our approach pursues the combination of germanium photodetectors with metallic nanohole arrays. The paper is focused on the technology development to fabricate large area photodetectors based on a modern design concept. In a first iteration we achieved a leakage current density of 82 mA/cm2 at reverse bias of 0.5 V and a maximum optical responsivity of 0.103 A/W measured with TE polarized light at λ = 1310 nm and a reversed bias of 1 V. For the realization of nanohole arrays we used thin Titanium nitride (TiN) layers deposited by a sputtering process. We were able to produce very homogenous TiN layers with a thickness deviation of around 10 \% and RMS of 1.413 nm for 150 nm thick TiN layers.}, language = {en} } @misc{StrobelAlvaradoChavarinRichteretal., author = {Strobel, Carsten and Alvarado Chavarin, Carlos and Richter, Karola and Knaut, Martin and Reif, Johanna and Völkel, Sandra and Jahn, Andreas and Albert, Matthias and Wenger, Christian and Kirchner, Robert and Bartha, Johann Wolfgang and Mikolajick, Thomas}, title = {Novel Graphene Adjustable-Barrier Transistor with Ultra-High Current Gain}, series = {ACS Applied Materials \& Interfaces}, volume = {14}, journal = {ACS Applied Materials \& Interfaces}, number = {34}, issn = {1944-8244}, doi = {10.1021/acsami.2c10634}, pages = {39249 -- 39254}, abstract = {A graphene-based three terminal barristor device was proposed to overcome the low on/off ratios and insufficient current saturation of conventional graphene field effect transistors. In this study, we fabricated and analyzed a novel graphene-based transistor, which resembles the structure of the barristor but uses a different operating condition. This new device, termed graphene adjustable-barriers transistor (GABT), utilizes a semiconductor-based gate rather than a metal-insulator gate structure to modulate the device currents. The key feature of the device is the two graphene-semiconductor Schottky barriers with different heights that are controlled simultaneously by the gate voltage. Due to the asymmetry of the barriers, the drain current exceeds the gate current by several orders of magnitude. Thus, the GABT can be considered an amplifier with an alterable current gain. In this work, a silicon-graphene-germanium GABT with an ultra-high current gain (ID/IG up to 8 × 106) was fabricated, and the device functionality was demonstrated. Additionally, a capacitance model is applied to predict the theoretical device performance resulting in an on-off ratio above 106, a swing of 87 mV/dec, and a drivecurrent of about 1 × 106 A/cm2.}, language = {en} }