@inproceedings{MuellerHenkelPaloumpaetal., author = {M{\"u}ller, Klaus and Henkel, Karsten and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {P(VDF/TrFE) as ferroelectric insulation layer for organic field effect transistors}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 41}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 41}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 101}, abstract = {The ferroelectric polymer poly(vinylidene fluoride trifluoroethylene)(P(VDF-TrFE)) is used as insulating material for organic field effect tran-sistors (OFET) and metal-insulator-semiconductor (MIS)-structures. For the MIS-structures, we find the typical hysteresis in the CV charac-teristic upon increasing the voltage scan window. Based on these results, we fabricate OFET with regioregular poly(3-hexlythiophene)(P3HT) as organic semiconductor. The transistors are constructed in bottom gate architecture with thin layers of spincoated P(VDF-TrFE) as gate insulation (100nm). The drain-source current of the OFET is reversible affected by the polarized gate, which gives opportunities for organic nonvolatile memory elements. We present characteristic features like the hysteretic drain current response or the data retention. Furthermore, we present measurements with Kelvin probe force microscopy, a method which gives informations on the lateral distributions of the surface potential.}, language = {en} } @inproceedings{HoffmannSchmeisserHimpseletal., author = {Hoffmann, Patrick and Schmeißer, Dieter and Himpsel, Franz J. and Engelmann, Hans-J{\"u}rgen and Zschech, Ehrenfried and Stegmann, Heiko and Denlinger, Jonathan D.}, title = {Characterization of Chemical Bonding in Low-K Dielectric Materials for Interconnect Isolation: XAS and EELS Study}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 41}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 41}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 156}, abstract = {The use of low dielectric constant materials in the on-chip interconnect process reduces interconnect delay, power dissipation and crosstalk noise. In CVD deposited organo-silicate glass (OSG) the substitution of oxygen in SiO2 by methyl groups (-CH3) reduces the permittivity significantly (from 4.0 in SiO2 to 2.6-3.3 in the OSG). However, plasma processing removes C and H containing molecular groups. Therefore, compositional analysis and chemical bonding characterization of structured films with nanometer resolution is necessary. OSG thin films as-deposited and after plasma treatment are studied using XAS and EELS. In both techniques, the fine structure near the C1s edge allows to identify C-H, C-C, and C-O bonds. XAS spectra have been recorded for non-patterned films and EELS spectra for patterned structures. The chemical bonding is compared for as-deposited and plasma-treated low-k materials. The flu-orescence and the electron yield recorded while XAS measurement are compared. Examination of the C 1s near-edge structures reveal a mod-ified bonding of the remaining C atoms in the plasma-treated sample regions.}, language = {en} } @inproceedings{MuellerChowdhuryDremovetal., author = {M{\"u}ller, P. and Chowdhury, F. and Dremov, V. and Koval, Yuri and Lichtenberg, F. and M{\"u}ller, S. and Schmeißer, Dieter and Pentcheva, R.}, title = {Resistive memory switching in perovskite-derivative single crystals}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 43}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 43}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 818}, abstract = {We investigated several layered perovskite derivatives of the family AnBnO3n+2, such as LaTiO3.41, CaNbO3.41 and SrNbO3.41, which can be considered as a stacking of blocks consisting of 5 perovskite layers. Electric transport across these layers takes place via intrinsic tunnelling. Mesa devices with a cross-sectional area of 50 to 200 µm2 and a height between 30 and 500 nm were fabricated by electron-beam lithography and ion-beam etching. Both dc I-V characteristics and pulsed current injection have shown switching between different resistive states in these materials. The resistive states have long-term stability, which makes them interesting for memory applications. The transport experiments suggest that switching and resistive memory are controlled by trapping and release of charge carriers. Furthermore, photoelectron and NEXAFS spectroscopy of cleaved LaTiO3.41 surfaces have been performed. The results are compared to recent correlated band theory (LDA+U) calculations.}, language = {en} } @inproceedings{SeifarthWalczykLupinaetal., author = {Seifarth, Olaf and Walczyk, Christian and Lupina, Grzegorz and Dabrowski, Jaroslaw and Weidner, G{\"u}nter and Zaumseil, Peter and Schmeißer, Dieter and Storck, Peter and M{\"u}ssig, Hans-Joachim and Schroeder, Thomas}, title = {On the electronic and dielectric characterisation of thin cubic PrO2 layers on Silicon}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 43}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 43}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 196}, abstract = {For the integration of 100 \% Ge onto the Si platform, a buffer oxide approach has been developed recently, using rare earth oxides to tune the lattice constant between the Si and the Ge. Among these buffer oxides, PrO2 is a prospective candidate with high quality crystalline growth on Si, moderated by an interfacial Pr-silicate between. In order to specify electronic properties of thin PrO2 and its interface on Si(111), especially the width of the band gap, we performed synchrotron radiation based XPS, UPS and XAS measurements at the U49/2 PGM 2 beamline at BESSY II and correlate the results with our structural characterisation performed by TEM and XRD. In order to evaluate the dielectric properties of thin PrO2 layers on Si(111), we performed temperature-, time-, voltage-, and layer thickness-dependent leakage current measurements (J-V). Here, we identified relaxation behaviour in the leakage current, successfully addressed to defect like states inside the Pr-silicate interface layer, corroborated by frequency dependent capacitance versus voltage (C-V) measurements.}, language = {en} } @inproceedings{FriedrichMichlingKloceketal., author = {Friedrich, Daniel and Michling, Marcel and Klocek, Jolanta and Schmeißer, Dieter and Avdoshenko, Stas and Chumakov, Dmytro and Zschech, Ehrenfried}, title = {Study of C60 based films formation by NEXAFS}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 145}, abstract = {The C60 fullerenes and some of its -OH, -CF3 and -Cl derivates are candidates for application as ultra-low-k insulators in the semiconductor industry. Future preparation of thin films based on these materials requires the stability of the substituted fullerenes against chemical handling and processing steps. The latter issue was addressed by our NEXAFS studies that were done by synchrotron radiation at the beam line U49/2-PGM2 at BESSY II. Performed were the C K-edge NEXAFS studies in total fluorescence and total electron yield modes. The C60 based films were deposited on silicon by spraying from solutions. The influence of the different substitutional groups with C60 molecules was studied. The data were compared to the reference spectra of a pure C60 film. For C60(OH)24, C60-Cl2 and C60(CF3)12 a variance of the intensity of the π*-resonance as well as shift to higher energies of 0.5 eV (-OH), 0.6 eV (-F), 0.7 eV (-Cl) were observed. The results confirm the necessary stability of the used C60 derivatives and shall be used for optimization of the film deposition chemistry and conditions.}, language = {en} } @inproceedings{KaravaevTallaridaSchmeisser, author = {Karavaev, Konstantin and Tallarida, Massimo and Schmeißer, Dieter}, title = {Evolution of the interfacial layer during the atomic layer deposition of HfO2 on Si/SiO2 substrates}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 160}, abstract = {We studied the formation of the interfacial layer in the Si/SiO2/HfO2 system using the in-situ Atomic Layer Deposition (ALD) reactor developed in our group [1,2]. We measured the X-ray photoelectron and X-ray absorption spectra with synchrotron radiation at the beamline U49-2/PGM2-BESSY II. The ALD growth was obtained using different Hf-precursors (HfCl4,TEMAHf and TDMAHf) on various prepared substrates at different temperatures. The investigation was carried out in-situ giving the possibility to determine the properties of the grown film after every ALD cycle without breaking the vacuum. We observed the evolution of the Si/SiO2/HfO2 system during the formation of first three Hf-oxide layers, detecting the interfacial growth of SiO2 during the initial ALD cycles from the XPS spectra of Si2p. We discuss how the interfacial layer growth depends on the various ALD parameters. [1] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Appl. Phys. 104, 064116 (2008); [2] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Vac. Sci. Technol. B, accepted for publication.}, language = {en} } @inproceedings{KolanekKaravaevTallaridaetal., author = {Kolanek, Krzysztof and Karavaev, Konstantin and Tallarida, Massimo and Schmeißer, Dieter}, title = {In-situ investigations of the atomic layer deposition of HfO2 with UHV/AFM}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 160}, abstract = {We studied in-situ the atomic layer deposition (ALD) of HfO2 with ultra high vacuum (UHV) atomic force microscope (AFM), using the ALD reactor developed by our group [1, 2]. The reactor was attached to the Omicron Large Sample-UHV/AFM system in the AFM-Lab of the Angewandte Physik-Sensorik chair at the BTU-Cottbus. We investigated different Si(001)/SiO2 substrates and surface preparation techniques performed before the ALD process. After each ALD cycle (using TDMAHf and H2O as precursors), we studied the influence of the HfO2 growth on the root mean square (RMS) roughness; the surface fractal dimension and the height histogram: the surface skewness and kurtosis. We focused on the influence of the substrate temperature on the surface topography during the ALD. The in-situ studies of the ALD process with the UHV/AFM system correlated with the experiments performed with photoelectron spectroscopy can be used for understanding the fundamental properties of the ALD of HfO2 on Si(001). [1] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Appl. Phys. 104, 064116 (2008); [2] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Vac. Sci. Technol. B, accepted for publication.}, language = {en} } @inproceedings{KraatzSchmeisserZschechetal., author = {Kraatz, Matthias and Schmeißer, Dieter and Zschech, Ehrenfried and Ho, Paul S.}, title = {Electromigration simulation for on-chip Cu interconnects}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 161}, abstract = {We are investigating the influence of copper microstructure on electromigration degradation effects and interconnect lifetimes using computer simulation. The simulation is carried out in three dimensions. For the copper microstructure, a Monte Carlo technique was used to model the Cu grain growth. Different diffusivities where applied to grain boundaries and top interface of the interconnect model according to the qualitative crystallographic orientation of adjacent grains. The grain boundary network and the top interface form the diffusion paths for the electromigration mass transport. Along the diffusion paths, the fluxes of vacancies where calculated including mechanical stress and electromigration driving forces using a finite difference method. Positive flux divergent sites of the FDM lattice are treated as void nucleation sites after a critical vacancy concentration is reached. The resistance increase due to void growth was calculated using a cellular automaton, masking current free regions as quasi voids and adding the resistance of the slices of the lattice normal to the electron flow direction in series. A parallel computing environment was used to generate large numbers of interconnect models in order to obtain a pool of data for statistical analysis of interconnect lifetimes. The results of this analysis will be shown}, language = {en} } @inproceedings{MichlingFriedrichSchmeisseretal., author = {Michling, Marcel and Friedrich, Daniel and Schmeißer, Dieter and Koval, Yuri and M{\"u}ller, Paul}, title = {Study of polyimide after graphitization with low-energy Ar+ Ion irradiation by NEXAFS}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 147}, abstract = {In this contribution we report on investigations of the electronic structure of Ar+ irradiated polyimide samples by using NEXAFS. The NEXAFS measurements were done at the U49/2-PGM2 beam line of BESSY II, Berlin using TEY and TFY detection. Polyimide samples are prepared using low Ar+ dose while the temperature of the samples is varied between 300K and 700K. In the NEXAFS data at the Carbon K-edge we see substantial changes between different samples. The differences appear in particular in the more surface sensitive TEY-Signal. The NEXFS data are consistent with the graphitization of the surface upon Ar+ bombardment as we identify the characteristic absorption bands of graphitic carbon. Its relative content increases with increasing sample temperature. In contrast, in the more bulk sensitive TFY data, the emission characteristic of polyimide is maintained. The possibility to cover insulating polymers with a conducting layer is a great demand for many applications. Because of the relative low price of the basic materials, the irradiation with low-energy Ions will play an important roll in the microelectronic of the future.}, language = {en} } @inproceedings{MuellerSchmeisser, author = {M{\"u}ller, Sebastian and Schmeißer, Dieter}, title = {Investigation of ultra-thin Chromium layers on Titanium Dioxide by resonant photoemission}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 453}, abstract = {Oxide supported metal films and clusters offer interesting properties with a wide range of possible applications. In this context, Titanium Dioxide is chosen as a model substrate due to its simple electronic structure with a d0 configuration. We study the interaction of ultrathin Chromium films deposited on TiO2 film with focus on the modifications of the valence band and band gap region. Normal photoemission in bulk and surface sensitive modes as well as resonant photoemission at the Cr 2p and Ti 2p edges are used to distinguish the different Cr 3d and Ti 3d contributions to the valence band. In the initial step we find to gap states of distinct character with a sharp resonance of the Cr 3d related state at the Cr 2p edge. With increasing layer thickness we observe that this resonance extends to about 20 eV below the Fermi-Energy. Datasets of valence band spectra measured around the Cr 2p edge show 2 resonant mechanisms in this case i.e. a participator channel for the 3d state accompanied by a spectator channel at fixed kinetic energy.}, language = {en} } @inproceedings{RichterMuellerPhilipetal., author = {Richter, Matthias and M{\"u}ller, Klaus and Philip, Shine and Paloumpa, Ioanna and Henkel, Karsten and Schmeißer, Dieter}, title = {Temperature dependence of organic solar cell parameters}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 671}, abstract = {The influence of an annealing step on the parameters of bulk heterojunction organic solar cells is investigated. In order to fabricate the solar cells we use glass coated with ITO (Indiumtinoxide) as a substrate on which the active layer consisting of P3HT and PCBM is spincoated. Al-electrodes are evaporated on top of the active layer. We use PEDOT:PSS as buffer layer. Each sample is annealed at different temperatures for a short time. Between every temperature step the I-V characteristic of the cell is measured. The following parameters are derived afterwards: FF, Isc (density), Voc. Also the efficiency is estimated. The results show a maximum cell efficiency for drying at 100°C for 20sec. A further important step for preparation is the drying procedure of the PEDOT:PSS layer. Here an improvement of about 50\% in cell efficiency is measured after drying at 50°C for 5 days under inert gas atmosphere.}, language = {en} } @inproceedings{TallaridaKaravaevKolaneketal., author = {Tallarida, Massimo and Karavaev, Konstantin and Kolanek, Krzysztof and Schmeißer, Dieter}, title = {Basics of the atomic layer deposition of HfO2 onto Si/SiO2 substrates: in-situ investigations with XPS, XAS and UHV-AFM}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 159}, abstract = {We developed a reactor for investigating in-situ the atomic layer deposition (ALD) of HfO2. X-ray photoelectron and X-ray absorption spectra were collected after each ALD cycle using synchrotron radiation at the beamline U49-2/PGM2 - BESSY II, Berlin. The morphology of the substrate and thin film surfaces was investigated after each ALD cycle with an UHV-AFM microscopy attached to the ALD reactor. We studied the ALD on differently prepared substrates, at different substrate temperatures, and using different Hf-precursors (HfCl4, TEMAHf, TDMAHf). We observed the evolution of the Si/SiO2/HfO2 system during the formation of the first three Hf-oxide layers [1]; we detected the incorporation of Cl into the Hf-oxide films and proposed a mechanism responsible for the Cl contamination [2]; we found evidence of the interfacial-SiO2 growth during the initial ALD cycles and of dipole formation at the HfO2/SiO2 interface. In this contribution we illustrate the basics of the technique used, and discuss the physical-chemical properties of ALD on the basis of the experimental results. [1] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Appl. Phys. 104, 064116 (2008); [2] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Vac. Sci. Technol. B, accepted for publication.}, language = {en} } @inproceedings{TallaridaKaravaevKolaneketal., author = {Tallarida, Massimo and Karavaev, Konstantin and Kolanek, Krzysztof and Schmeißer, Dieter}, title = {In-situ experimental approach to the study of atomic layer deposition with atomic force microscope, X-ray photoelectron and X-ray absorption spectroscopy}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S.176}, abstract = {We describe our experimental approach to the investigation of atomic layer deposition (ALD). ALD is a powerful deposition technique for growing conformal thin films of composite materials with atomically accurate thickness on large area [1]. Despite the enormous industrial interest growing around ALD, its fundamental properties were not yet properly studied. We developed an ALD reactor for the in-situ investigations using XPS, XAS and AFM as experimental techniques. We studied the chemical-physical properties of the growing thin films after each deposition cycle. Here, we illustrate the recent results concerning the ALD of HfO2 obtained using different Hf-precursors on various substrates [2]. We show how the in-situ investigations could deliver an important insight into the fundamental characteristics of ALD and how these information could be used to modify and optimize the deposition parameters. [1] M. Leskel{\"a}, M. Ritala, Thin Solid Films, 409, 138, 2002; [2] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Appl. Phys. 104, 064116 (2008).}, language = {en} }