@inproceedings{RouissiTallaridaSchmeisser, author = {Rouissi, Zied and Tallarida, Massimo and Schmeißer, Dieter}, title = {Study of atomic layer deposition with scanning tunneling microscopy}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 401}, abstract = {We present a work concerning the study of the initial steps of atomic layer deposition (ALD) with scanning tunneling microscopy (STM). We focus on the role of the substrates which has been often neglected.However, the detailed knowledge of precursor-substrate reactions is important for the understanding of how ALD proceeds. We report on the reaction of the Al-precursor, trimethyl-Al (TMA), on nanostructured surfaces such as Ag nanoclusters and nanostripes prepared by thermal evaporation on HOPG. We characterized the surface before and after one TMA adsorption pulse at room temperature, observing that the morphology of step edges changes after TMA creating a new terraces with a width of 7-10 nm, translated in the direction of the TMA deposition. This shows that, in case of a regular stepped surface, the substrate morphology would keep the same regularity with the translation in a direction privileged by the precursor absorption.}, language = {en} } @inproceedings{RouissiBrizziAlbertonCorreaetal., author = {Rouissi, Zied and Brizzi, Simone and Alberton Corr{\^e}a, Silma and Tallarida, Massimo and Schmeißer, Dieter}, title = {Comparison of charge neutrality level of Cu/CuO/HfO2 and Si/SiO2/HfO2}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {208}, abstract = {Copper Oxide (CuO) is a promising metal oxide semiconductor, which can be used in different applications, such as catalysis, solar energy conversion, and water splitting. In this work, we use resonance photoemission spectroscopy (ResPES) to analyse the electronics properties of HfO2 films deposited on Cu/CuO and Si/SiO2. For that, we deposited 10 cycles of HfO2 by atomic layer deposition (ALD) on Cu/CuO and Si/SiO2 samples and investigated the density states for the valence and conduction bands which were determined by the detailed analysis of the O1s resonance profile obtained by ResPES. We compared the positions of valence band maximum and conduction band minimum, the excitation range for the polaronic states and the range of charge transfer band in Cu/CuO/HfO2 and Si/SiO2/HfO2. Also, we determined the band gap and the charge neutrality level (CNL).}, language = {en} } @inproceedings{RouissiTallaridaSchmeisser, author = {Rouissi, Zied and Tallarida, Massimo and Schmeißer, Dieter}, title = {HfO2 grow by ALD on Si(111)-H terminated stepped surface}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, pages = {S. 419}, abstract = {We studied by STM the growth of HfO2 on Si (111)-H stepped surface (miscut by 0.5∘). The steps are aligned in the [11-2] direction. In order to obtain well defined steps and terraces we prepare the sample by chemical etching in 40\% Nh4F. In our in-situ study we investigate the ALD growth of HfO2 by TDMAH and H2O [1-2]. We follow for the first four ALD cycles the distribution of the nucleation sites. We also study the influence of the substrate temperature by comparing the growth within the ALD window at 300K and 580K. We observed that at RT the as-grown HfO2 forms stripes which are oriented normal to the step orientations. Further growth starts from the step edges and proceeds towards the terraces. Defects created by the etching processes act as nucleation sites for 3D islands. Based on our STM data we are able to correlate the structural changes on that inert and stepped Si(111)-H surface during ALD with experimental [3] and theoretical [4] results obtained for planar Si(100) surfaces. [1] M. Tallarida et al., Semicond. Sci. Technol. 27, 074010 (2012) [2] K. Kolanek et al., Thin Solid Films 518, 4688 (2010) [3] K. Kolanek et al., J. Vac. Sci. Technol. A 31, 01A104 (2013) [4]L. Riikka et al., J. Appl. Phys.96, 7686 (2004)}, language = {en} } @inproceedings{RouissiHenkelTallaridaetal., author = {Rouissi, Zied and Henkel, Karsten and Tallarida, Massimo and Schmeißer, Dieter}, title = {ALD growth of Al2O3 on Stepped Surface of HOPG and Ag-HOPG}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, pages = {S. 419}, abstract = {Atomic Layer Deposition (ALD) is an excellent deposition technique to grow thin film with high homogeneity coverage on ideal surfaces. Here we are interested in the growth properties on non-ideal (stepped, inert) surfaces. Using STM we studied the growth of Al2O3 by ALD on stepped surface of HOPG and silver covered HOPG (Ag-HOPG). The HOPG sample was cleaved to and then cleaned by N2 in vacuum. We obtain regular steps with terrace widths of 50nm - 500nm. Ag was deposited by thermal deposition on the HOPG. The Al2O3 growth at RT was studies after the first, third, and fifth cycle. Silver evaporation leads to step decoration with island of 1nm-7nm. On the terraces we find the formation of 2D domain of Ag chains. The features caused by the individual ALD cycles of Al2O3 depend on the terrace widths of the HOPG substrate. For small terraces (<100nm) we obtain a growth of 2D domains ( 20nm-25nm) on the edge steps and in the middle of the terrace. For large terraces (>100nm) we find agglomeration of the precursors on individual nucleation sites. Here 3D islands are formed with a height of up to 5nm in the fifth ALD cycle.}, language = {en} } @misc{SowinskaDasWojciechowskietal., author = {Sowinska, Małgorzata and Das, Chittaranjan and Wojciechowski, Konrad and Rouissi, Zied and Snaith, Henry J. and Schmeißer, Dieter}, title = {Atomic layer deposition of Al2O3 on CH3NH3PbI3 for enhancement of perovskite solar cells stability}, series = {Synchrotron Radiation in Natural Science : Bulletin of the Polish Synchrotron Radiation Society}, volume = {15}, journal = {Synchrotron Radiation in Natural Science : Bulletin of the Polish Synchrotron Radiation Society}, number = {1-2}, issn = {1644-7190}, pages = {S. 33}, language = {en} } @misc{KotDasWangetal., author = {Kot, Małgorzata and Das, Chittaranjan and Wang, Zhiping and Henkel, Karsten and Rouissi, Zied and Wojciechowski, Konrad and Snaith, Henry J. and Schmeißer, Dieter}, title = {Room-Temperature Atomic Layer Deposition of Al₂O₃: Impact on Efficiency, Stability and Surface Properties in Perovskite Solar Cells}, series = {ChemSusChem}, volume = {9}, journal = {ChemSusChem}, number = {24}, issn = {1864-5631}, doi = {10.1002/cssc.201601186}, pages = {3401 -- 3406}, abstract = {In this work, solar cells with a freshly made CH₃NH₃PbI₃ perovskite film showed a power conversion efficiency (PCE) of 15.4 \% whereas the one with 50 days aged perovskite film only 6.1 \%. However, when the aged perovskite was covered with a layer of Al₂O₃ deposited by atomic layer deposition (ALD) at room temperature (RT), the PCE value was clearly enhanced. X-ray photoelectron spectroscopy study showed that the ALD precursors are chemically active only at the perovskite surface and passivate it. Moreover, the RT-ALD-Al2O3-covered perovskite films showed enhanced ambient air stability.}, language = {en} } @misc{DasKotRouissietal., author = {Das, Chittaranjan and Kot, Małgorzata and Rouissi, Zied and Kędzierski, Kamil and Henkel, Karsten and Schmeißer, Dieter}, title = {Selective Deposition of an ultrathin Pt Layer on a Au-Nanoisland-Modified Si Photocathode for Hydrogen Generation}, series = {ACS Omega}, volume = {2}, journal = {ACS Omega}, number = {4}, issn = {2470-1343}, doi = {10.1021/acsomega.6b00374}, pages = {1360 -- 1366}, abstract = {Platinum, being the most efficient and stable catalyst, is used in photoelectrochemical (PEC) devices. However, a minimal amount of Pt with maximum catalytic activity is required to be used to minimize the cost of production. In this work, we use an environmentally friendly, ost-effective, and less Pt-consuming method to prepare PEC devices for the hydrogen evolution reaction (HER). The Pt monolayer catalyst is selectively deposited on a Au-nanoisland-supported boron-doped p-type Si (100) photocathode. The PEC device based on the Si photocathode with an ultralow loading of the Pt catalyst exhibits a comparable performance for the HER to that of devices with a thick Pt layer. In addition, we demonstrate that by using a thin TiO2 layer deposited by atomic layer deposition photo-oxidation of the Si photocathode can be blocked resulting in a stable PEC performance.}, language = {en} } @phdthesis{Rouissi, author = {Rouissi, Zied}, title = {Role of substrate morphology and chemistry in ALD: HfO2 on Si(111)-H terminated surfaces as model}, publisher = {BTU Cottbus-Senftenberg}, address = {Cottbus}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-42418}, pages = {153}, abstract = {This work presents an approach to investigate fundamental aspects concerning the early stage of the atomic layer deposition (ALD) growth process on stepped surfaces. The first interaction between precursors and surface is strongly important for the ALD growth that it is still far away from the status to be completely understood. For this purpose, a few ALD-cycles with tetrakis(dimethylamido)hafnium (TDMAH) and trimethylaluminum (TMA) as metallic precursors and water (H₂O) as oxidant has been performed in order to study the initial metal oxide film growth on stepped surfaces such as silicon Si(111)-H terminated, highly oriented pyrolytic graphite (HOPG) and silver deposited HOPG (Ag-HOPG). These investigations have been carried out at various substrate temperatures, where scanning tunneling microscopy (STM) has been used systematically to probe the ALD features. This technique is delivering unique knowledge about the locality and the density of nucleation's sites on the different substrates. The data collected are then subjected to a mathematical model to understand the growth and to determine the effect of the surface morphology and chemistry on the behavior of the nucleation. The in-situ cycle-by-cycle STM investigation of 4 initial ALD cycles of TDMAH and H₂O on Si(111)-H terminated at room temperature (RT) and at 280°C displays two regimes of growth: In Regime I (1st - 2nd cycle) an increase in roughness in the first cycle to 0.2nm and 0.34nm respectively for RT and 280°C with a partial surface coverage of 71\% and 54\% is observed. In the 2nd cycle, the coverage increased to ~98\% and 94\% maintaining the same film height of the 1st cycle. A complete layer is formed in this regime. The results are discussed in reference to the Puurunen model. Following this model, the determination of the reaction mechanism in relation to the number of Hf atoms/nm² attached to the surface reveals that two ligands exchanges occur at RT and one ligand exchange at 280°C in the first regime. In addition, the origin of the reaction saturation was determined to be caused by the steric hindrance effect. In this first regime, the growth model is governed by random deposition followed by Mullins diffusion as determined from the universal values found for the roughness dynamic exponents (α, β, 1/z) of the film.}, language = {en} } @misc{KotHenkelNaumannetal., author = {Kot, Małgorzata and Henkel, Karsten and Naumann, Franziska and Gargouri, Hassan and Tarnawska, Lidia Lupina and Wilker, Viola and Kus, Peter and Pożarowska, Emilia and Garain, Samiran and Rouissi, Zied and Schmeißer, Dieter}, title = {Comparison of plasma-enhanced atomic layer deposition AlN films prepared with different plasma sources}, series = {Journal of Vacuum Science and Technology A}, volume = {37}, journal = {Journal of Vacuum Science and Technology A}, number = {2}, issn = {0734-2101}, doi = {10.1116/1.5079628}, pages = {11}, abstract = {A comparative study of thin aluminum nitride (AlN) films deposited by plasma-enhanced atomic layer deposition in the SENTECH SI ALD LL system applying either a direct inductively coupled plasma (ICP) or an indirect capacitively coupled plasma (CCP) source is presented. The films prepared with the ICP source (based on a planar triple spiral antenna) exhibit improved properties concerning the growth rate per cycle, total cycle duration, homogeneity, refractive index, fixed and mobile electrical charges, and residual oxygen content compared to the CCP source, where the comparison is based on the applied plasma power of 200 W. The increase of the plasma power to 600 W in the ICP process significantly reduces the residual oxygen content and enhances the electrical breakdown field. The AlN layers grown under these conditions, with a growth rate per cycle of 1.54 {\AA}/cycle, contain residual oxygen and carbon concentrations of about 10\% and 4\%, respectively, and possess a refractive index of 2.07 (at 632.8 nm).}, language = {en} }