@misc{JinksBottovanBemdenBunzlietal., author = {Jinks, Clare and Botto-van Bemden, Angie and Bunzli, Samantha and Bowden, Jocelyn and Egerton, Thorlene and Eyles, Jillian and Foster, Nadine and Healey, Emma L. and Maddison, John and O'Brien, Daniel and Quicke, Jonathan G. and Schiphof, Dieuwke and Parry, Emma and Thomas, Martin J. and Holden, Melanie A. and Allen, Kelli and Babatunde, Opeyemi O. and Bennel, Kim L. and Berry, Alice and Bierma-Zeinstra, Sita and Callahan, Leigh and Campbell, Laura and Dziedzic, Krysia S. and Finney, Andrew and French, Helen P. and Haber, Travis and Hadley-Barrows, Tina and Hall, Michelle and Hawker, Gillian and Henriksen, Marius and Hinman, Rana S. and Ho-Pham, Lan and Hunter, David J. and Lawford, Belinda J. and Mallen, Christian D. and McHugh, Gretl A. and Kopkow, Christian and Neogi, Tuhina and Nicholls, Elaine and Nicolson, Philippa J. A. and {\O}ster{\aa}s, Nina and Paskins, Zoe and Protheroe, Joanne and Roos, Ewa M. and Runhaar, Jos and Skou, Soren T. and Simkins, Joanna and Swaithes, Laura and Thomas, Geraint and Esch, Martin van der and Whittaker, Jackie and Zhang, Weiya}, title = {Changing the narrative on osteoarthritis: A call for global action}, series = {Osteoarthritis and Cartilage}, volume = {32}, journal = {Osteoarthritis and Cartilage}, number = {4}, issn = {1063-4584}, doi = {10.1016/j.joca.2024.02.004}, pages = {414 -- 420}, language = {en} } @inproceedings{ZhangWendtZhangetal., author = {Zhang, Ping and Wendt, Jens and Zhang, J. and Holl{\"a}nder, F. and Supik, Vladimir}, title = {Superplasticity in hot-rolled magnesium alloy AZ31 sheets}, series = {Magnesium, proceedings of the 6th International Conference Magnesium Alloys and Their Applications, November 2003 in Wolfsburg}, booktitle = {Magnesium, proceedings of the 6th International Conference Magnesium Alloys and Their Applications, November 2003 in Wolfsburg}, editor = {Kainer, Karl Ulrich}, publisher = {Wiley-VCH}, address = {Weinheim}, isbn = {3-527-30975-6}, pages = {S. 439}, language = {de} } @misc{SullivanWilksWinkleretal., author = {Sullivan, J. T. and Wilks, Regan G. and Winkler, M. T. and Weinhardt, Lothar and Recht, D. and Said, A. J. and Newman, B. K. and Zhang, Y. and Blum, Monika and Krause, S. and Yang, Wan Li and Heske, Clemens and Aziz, M. J. and B{\"a}r, Marcus and Buonassisi, T.}, title = {Soft x-ray emission spectroscopy studies of the electronic structure of silicon supersaturated with sulfur}, abstract = {We apply soft x-ray emission spectroscopy (XES) to measure the electronic structure of crystalline silicon supersaturated with sulfur (up to 0.7 at. \%), a candidate intermediate-band solar cell material. Si L2,3 emission features are observed above the conventional Si valence band maximum, with intensity scaling linearly with S concentration. The lineshape of the S-induced features change across the insulator-to-metal transition, indicating a significant modification of the local electronic structure concurrent with the change in macroscopic electronic behavior. The relationship between the Si L2,3 XES spectral features and the anomalously high sub-band gap infrared absorption is discussed.}, language = {en} } @misc{LiuDongZhangetal., author = {Liu, W. C. and Dong, J. and Zhang, Ping and Zhai, Chun-Quan and Ding, W. J.}, title = {Effect of Shot Peening on Surface Characteristics and Fatigue Properties of T5-treated ZK60 Alloy}, language = {en} } @misc{LiuDongZhangetal., author = {Liu, W. C. and Dong, J. and Zhang, Ping and Yao, Z. Y. and Zhai, Chun-Quan and Ding, W. J.}, title = {High cycle fatigue behaviour of as-extruded ZK60 magnesium alloy}, language = {en} } @misc{MalliotakisBanyonZhangetal., author = {Malliotakis, Zisis and Banyon, Colin and Zhang, Kuiwen and Wagnon, Scott W. and Rodriguez Henriquez, Jose Juan and Vourliotakis, George and Keramiotis, Christos and Founti, Maria and Mauß, Fabian and Pitz, William J. and Curran, Henry J.}, title = {Testing the validity of a mechanism describing the oxidation of binary n-heptane/toluene mixtures at engine operating conditions}, series = {Combustion and Flame}, volume = {199}, journal = {Combustion and Flame}, issn = {0010-2180}, doi = {10.1016/j.combustflame.2018.10.024}, pages = {241 -- 248}, abstract = {The aim of this work is to evaluate the influence of the n-heptane/toluene ratio on the reactivity of binary toluene reference fuels (TRFs), through a combined experimental and numerical work. Novel experimental ignition delay time (IDT) data of three binary TRFs of varying n-heptane/toluene ratios have been obtained in a high-pressure shock tube and in a rapid compression machine at conditions relevant to novel engine operation. Measurements have been performed at two pressures (10 and 30 bar), and at three fuel/air equivalence ratios (0.5, 1.0 and 2.0) for TRF mixtures of 50\%, 75\% and 90\% by volume toluene concentration, over the temperature range of 650-1450 K. It was found that, increasing the n-heptane content, led to an increase in reactivity and shorter measured IDTs. Reduced sensitivity to the equivalence ratio was observed at high temperatures, especially for high toluene content mixtures. A …}, language = {en} } @inproceedings{ZhangKutzscheRosenbergetal., author = {Zhang, J. and Kutzsche, Anja and Rosenberg, K. and Viehweger, Bernd and Leyens, Christoph}, title = {A novel canning technology for forging of gamma-TiAl alloys}, abstract = {A novel canning technology to forge gamma-TiAl alloys was developed at the BTU Cottbus. A TiAl specimen is encapsulated with multilayer stainless steel foil and glass. The steel foil layers prevent the heat loss through radiation and the glass layer reduces the temperature decrease through conduction. First, the effect of steel foil on the cooling rate was investigated. Cooling curves were recorded for TiAl specimens without steel foil layer, with 1, 2, 3 and 4 layers of steel foil, as well as with 3 coated steel foil layers, respectively. While the unprotected specimen cooled from 1200 °C to 1100 °C within 12 s, the specimen with 3 coated steel foil layers needed 52 s for the same temperature decrease. The efficiency of the glass layer was examined with forging of steel specimens. The cooling rate during forging of the specimen with a glass layer is only half of that without a glass layer. Based on the results, Ti-45Al-0.5Mo-0.5Cu-0.2Si specimens, canned with steel foil and glass, were successfully forged at strain rates of 0.1 s-1 and 0.04 s-1 with warm dies which were heated to 500 °C. Visual and metallographic examinations revealed no cracks, pores or micropores. The microstructures are fine-equiaxed grains.}, language = {en} } @inproceedings{KutzscheZhangAppeletal., author = {Kutzsche, Anja and Zhang, J. and Appel, Fritz and Leyens, Christoph and Viehweger, Bernd}, title = {Forging of Beta-Phase containing gamma-TiAl alloys}, language = {en} } @misc{HofmannYuFolseetal., author = {Hofmann, Timo and Yu, Ted H. and Folse, Michael and Weinhardt, Lothar and B{\"a}r, Marcus and Zhang, Yufeng and Merinov, Boris V. and Myers, Deborah J. and Goddard, William A. and Heske, Clemens}, title = {Reply to "Comment on 'Using Photoelectron Spectroscopy and Quantum Mechanics to Determine d-Band Energies of Metals for Catalytic Applications'"}, series = {Journal of Physical Chemistry : C}, volume = {117}, journal = {Journal of Physical Chemistry : C}, number = {13}, issn = {1932-7455}, pages = {6916 -- 6917}, language = {en} } @misc{GeyerMoreauZhangetal., author = {Geyer, Thomas and Moreau, Danielle J. and Zhang, Tingyi and Schneehagen, Erik W. and Ding, Yuchen}, title = {Experimental investigation of novel, low-noise turbine blade tip designs}, series = {Fortschritte der Akustik - DAGA, 46. Jahrestagung f{\"u}r Akustik, 16.-19. M{\"a}rz 2020 in Hannover}, journal = {Fortschritte der Akustik - DAGA, 46. Jahrestagung f{\"u}r Akustik, 16.-19. M{\"a}rz 2020 in Hannover}, pages = {4}, language = {en} }