@misc{LangaConradSchenketal., author = {Langa, Sergiu and Conrad, Holger and Schenk, Harald and Stolz, Michael}, title = {Elektrostatisch auslenkbares mikromechanisches Bauelement}, language = {de} } @misc{ConradSchenkKaiseretal., author = {Conrad, Holger and Schenk, Harald and Kaiser, Bert and Langa, Sergiu and Gaudet, Matthieu and Schimmanz, Klaus and Stolz, Michael and Lenz, Miriam}, title = {A small-gap electrostatic micro-actuator for large deflections}, series = {Nature Communications}, journal = {Nature Communications}, number = {6}, issn = {2041-1723}, doi = {10.1038/ncomms10078}, pages = {10078}, language = {en} } @misc{ConradKaiserGaudetetal., author = {Conrad, Holger and Kaiser, Bert and Gaudet, Matthieu and Langa, Sergiu and Stolz, Michael and Uhlig, Sebastian and Schimmanz, Klaus and Schenk, Harald}, title = {A novel electrostatic actuator class}, series = {Procedia Engineering}, volume = {168}, journal = {Procedia Engineering}, issn = {1877-7058}, doi = {10.1016/j.proeng.2016.11.454}, pages = {1533 -- 1536}, language = {en} } @inproceedings{SchenkConradGaudetetal., author = {Schenk, Harald and Conrad, Holger and Gaudet, Matthieu and Uhlig, Sebastian and Kaiser, Bert and Langa, Sergiu and Stolz, Michael and Schimmanz, Klaus}, title = {A novel electrostatic micro-actuator class and its application potential for optical MEMS}, series = {2016 International Conference on Optical MEMS and Nanophotonics,31 July-04 August 2016, Singapore, proceedings}, booktitle = {2016 International Conference on Optical MEMS and Nanophotonics,31 July-04 August 2016, Singapore, proceedings}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-5090-1036-3}, doi = {10.1109/OMN.2016.7565867}, pages = {Tu 3.11-1 -- Tu 3.11-2}, language = {en} } @inproceedings{GaudetUhligStolzetal., author = {Gaudet, Matthieu and Uhlig, Sebastian and Stolz, Michael and Arscott, S. and Conrad, Holger and Langa, Sergiu and Kaiser, Bert and Schenk, Harald}, title = {Electrostatic bending actuators with liquid filled nanometer scale gap}, series = {MEMS 2017, the 30th IEEE International Conference on Micro Electro Mechanical Systems, Las Vegas, Nevada, USA, January 22-26 2017}, booktitle = {MEMS 2017, the 30th IEEE International Conference on Micro Electro Mechanical Systems, Las Vegas, Nevada, USA, January 22-26 2017}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-5090-5078-9}, pages = {175 -- 178}, language = {en} } @inproceedings{SchenkConradGaudetetal., author = {Schenk, Harald and Conrad, Holger and Gaudet, Matthieu and Uhlig, Sebastian and Kaiser, Bert and Langa, Sergiu and Stolz, Michael and Schimmanz, Klaus}, title = {A contribution to the expansion of the applicability of electrostatic forces in micro transducers}, series = {MOEMS and Miniaturized Systems XVI, 30 January-1 February 2017, San Francisco, California, United States}, booktitle = {MOEMS and Miniaturized Systems XVI, 30 January-1 February 2017, San Francisco, California, United States}, publisher = {SPIE}, address = {Bellingham, Washington, USA}, isbn = {978-1-5106-0674-6}, doi = {10.1117/12.2249575}, language = {en} } @misc{LangaConradKaiseretal., author = {Langa, Sergiu and Conrad, Holger and Kaiser, Bert and Stolz, Michael and Gaudet, Matthieu and Uhlig, Sebastian and Schimmanz, Klaus and Schenk, Harald}, title = {Technological aspects of a new micro-electro-mechanical actuation principle: nano e-drive}, series = {Microsystem Technologies}, volume = {23}, journal = {Microsystem Technologies}, number = {1}, issn = {1432-1858}, doi = {10.1007/s00542-017-3360-6}, pages = {5697 -- 5708}, language = {en} } @inproceedings{ConradGaudetKaiseretal., author = {Conrad, Holger and Gaudet, Matthieu and Kaiser, Bert and Langa, Sergiu and Stolz, Michael and Schenk, Harald}, title = {CMOS-kompatible elektrostatische Biegeaktoren (CMOS-compatible electrostatic actuators}, series = {MikroSystemTechnik Kongress 2017, M{\"u}nchen, Germany, 23.-25. Oktober 2017}, booktitle = {MikroSystemTechnik Kongress 2017, M{\"u}nchen, Germany, 23.-25. Oktober 2017}, publisher = {VDE-Verlag}, address = {Berlin [u.a.]}, isbn = {978-3-8007-4491-6}, pages = {219 -- 222}, language = {en} } @misc{StolzMroskKaiseretal., author = {Stolz, Michael and Mrosk, Andreas and Kaiser, Bert and Langa, Sergiu and Ehrig, Lutz and Conrad, Holger and Gaudet, Matthieu and Schenk, Harald}, title = {Optische Charakterisierungsmethoden von siliziumbasierten MEMS mit verdeckten Strukturen}, series = {MikroSystemTechnik-Kongress, Berlin, Germany, 2019}, journal = {MikroSystemTechnik-Kongress, Berlin, Germany, 2019}, publisher = {VDE-Verlag}, pages = {366 -- 369}, abstract = {In der Arbeitsgruppe integrierte Siliziumsysteme des Fraunhofer IPMS werden am Standort Cottbus innovative Anwen-dungen eines neuartigen nanoskopischen elektrostatischen Antriebs (nanoskopic electrostatic drive - NED) untersucht. Eine der vielversprechendsten Anwendungen sind Lautsprecher. Vollst{\"a}ndig aus Silizium gefertigte MEMS-Lautsprecher auf Basis von NED-Biegeaktoren werden vor den akustischen Messungen mechanisch und elektrisch cha-rakterisiert. Beidseitig eingespannte elektrostatisch betriebene in-plane NED-Aktoren werden dabei {\"u}ber einen Fre-quenzbereich von 20 Hz bis 20 kHz angeregt. Dabei sind die Strukturen oft verdeckt, was ihre Charakterisierung er-schwert. Es werden zerst{\"o}rungsfreie optische Methoden pr{\"a}sentiert, mit deren Hilfe die Bestimmung der mechanischen Schwingungseigenschaften einzelner Aktoren erm{\"o}glicht wird sowie die Beweglichkeit im verdeckten Zustand nach-gewiesen werden kann.}, language = {de} } @misc{SpitzWallSchenketal., author = {Spitz, Barbara and Wall, Franziska and Schenk, Hermann and Melnikov, Anton and Ehrig, Lutz and Langa, Sergiu and Stolz, Michael and Kaiser, Bert and Conrad, Holger and Schenk, Harald and Pufe, Wolfram}, title = {Audio-Transducer f{\"u}r In-Ear-Anwendungen auf der Basis CMOS-kompatibler, elektrostatischer Biegeaktoren}, series = {MikroSystemTechnik-Kongress, Berlin, Germany, 2019}, journal = {MikroSystemTechnik-Kongress, Berlin, Germany, 2019}, publisher = {VDE-Verlag}, pages = {54 -- 57}, abstract = {Recently an innovative mSpeaker technology, based on a novel kind of CMOS compatible small gap electrostatic actuators for large deflection, has been introduced [1]. In this paper, we devise methods to model such speakers in terms of lumped parameters using the deflection of the beam centre as sole dynamic variable. Optical, acoustical and finite element methods (FEM) are used to validate the non-linear lumped parameter model (LPM). The experimental evaluation and LPM simulations of the total harmonic distortion reveal deeper insights into the mechanisms governing linearity.}, language = {de} } @misc{KaiserLangaEhrigetal., author = {Kaiser, Bert and Langa, Sergiu and Ehrig, Lutz and Stolz, Michael and Schenk, Hermann and Conrad, Holger and Schenk, Harald and Schimmanz, Klaus and Schuffenhauer, David}, title = {Concept and proof for an all-silicon MEMS micro speaker utilizing air chambers}, series = {Microsystems and Nanoengineering}, journal = {Microsystems and Nanoengineering}, number = {5}, issn = {2055-7434}, doi = {10.1038/s41378-019-0095-9}, pages = {11}, abstract = {MEMS-based micro speakers are attractive candidates as sound transducers for smart devices, particularly wearables and hearables. For such devices, high sound pressure levels, low harmonic distortion and low power consumption are required for industrial, consumer and medical applications. The ability to integrate with microelectronic circuitry, as well as scalable batch production to enable low unit costs, are the key factors benchmarking a technology. The Nanoscopic Electrostatic Drive based, novel micro speaker concept presented in this work essentially comprises in-plane, electrostatic bending actuators, and uses the chip volume rather than the its surface for sound generation. We describe the principle, design, fabrication, and first characterization results. Various design options and governing equations are given and discussed. In a standard acoustical test setup (ear simulator), a MEMS micro speaker generated a sound pressure level of 69 dB at 500 Hz with a total harmonic distortion of 4.4\%, thus proving the concept. Further potential on sound pressure as well as linearity improvement is outlined. We expect that the described methods can be used to enhance and design other MEMS devices and foster modeling and simulation approaches.}, language = {en} } @misc{EhrigKaiserSchenketal., author = {Ehrig, Lutz and Kaiser, Bert and Schenk, Hermann and Stolz, Michael and Langa, Sergiu and Conrad, Holger and Schenk, Harald and M{\"a}nnchen, Andreas and Brocks, Tobias}, title = {Acoustic validation of electrostatic all-silicon MEMS-speakers}, series = {AES International Conference on Headphone Technology, San Francisco, New York, USA, 2019}, journal = {AES International Conference on Headphone Technology, San Francisco, New York, USA, 2019}, doi = {10.17743/aesconf.2019.978-1-942220-29-9}, language = {en} }