@misc{SizovaSviridovBambach, author = {Sizova, Irina and Sviridov, Alexander and Bambach, Markus}, title = {Avoiding crack nucleation and propagation during upset bulging of tubes}, series = {International Journal of Material Forming}, volume = {10}, journal = {International Journal of Material Forming}, number = {3}, issn = {1960-6214}, doi = {10.1007/s12289-016-1292-9}, pages = {443 -- 451}, language = {en} } @misc{BambachSizovaBolzetal., author = {Bambach, Markus and Sizova, Irina and Bolz, Sebastian and Weiß, Sabine}, title = {Devising Strain Hardening Models Using Kocks-Mecking Plots - A Comparison of Model Development for Titanium Aluminides and Case Hardening Steel}, series = {Metals}, volume = {6}, journal = {Metals}, number = {9}, issn = {2075-4701}, doi = {10.3390/met6090204}, pages = {204}, language = {en} } @inproceedings{SizovaSviridovGuentheretal., author = {Sizova, Irina and Sviridov, Alexander and G{\"u}nther, Martin and Bambach, Markus}, title = {Finite element modelling of titanium aluminides}, series = {KomPlasTech 2017 : XXIV International Conference on Computer Methods in Materials Technology, January 15-18, 2017, Zakopane, Poland : book of abstracts}, booktitle = {KomPlasTech 2017 : XXIV International Conference on Computer Methods in Materials Technology, January 15-18, 2017, Zakopane, Poland : book of abstracts}, editor = {Szeliga, Danuta and Rauch, Łukasz}, publisher = {AKNET-PRess}, address = {Krakow}, isbn = {978-83-947091-0-5}, pages = {46 -- 47}, language = {en} } @inproceedings{BambachSizovaBolzetal., author = {Bambach, Markus and Sizova, Irina and Bolz, Sebastian and Weiß, Sabine}, title = {Development of a dynamic recrystallization model for a β-solidifying titanium aluminide alloy using Kocks-Mecking plots}, series = {ESAFORM 2016, proceedings of the 19th International ESAFORM Conference on Material Forming, Nantes, France, 27-29 April 2016}, booktitle = {ESAFORM 2016, proceedings of the 19th International ESAFORM Conference on Material Forming, Nantes, France, 27-29 April 2016}, publisher = {AIP Publishing}, address = {Melville, New York}, isbn = {978-0-7354-1427-3}, doi = {10.1063/1.4963545}, pages = {160002-1 -- 160002-7}, language = {en} } @misc{SizovaBambach, author = {Sizova, Irina and Bambach, Markus}, title = {Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing}, series = {Procedia Engineering}, volume = {207}, journal = {Procedia Engineering}, issn = {1877-7058}, doi = {10.1016/j.proeng.2017.10.1048}, pages = {1170 -- 1175}, language = {en} } @misc{BambachSizovaSviridovetal., author = {Bambach, Markus and Sizova, Irina and Sviridov, Alexander and Stendal, Johan Andreas and G{\"u}nther, Martin}, title = {Batch Processing in Preassembled Die Sets - A New Process Design for Isothermal Forging of Titanium Aluminides}, series = {Journal of Manufacturing and Materials Processing}, volume = {2}, journal = {Journal of Manufacturing and Materials Processing}, number = {1}, issn = {2504-4494}, doi = {doi:10.3390/jmmp2010001}, pages = {14}, language = {en} } @misc{BambachSizovaSilzeetal., author = {Bambach, Markus and Sizova, Irina and Silze, Frank and Schnick, Michael}, title = {Hot workability and microstructure evolution of the nickel-based superalloy Inconel 718 produced by laser metal deposition}, series = {Journal of Alloys and Compounds}, volume = {Vol. 740}, journal = {Journal of Alloys and Compounds}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2018.01.029}, pages = {278 -- 287}, language = {en} } @misc{SizovaBambach, author = {Sizova, Irina and Bambach, Markus}, title = {Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing}, series = {Journal of Materials Processing Technology}, volume = {256}, journal = {Journal of Materials Processing Technology}, issn = {0924-0136}, doi = {10.1016/j.jmatprotec.2018.02.017}, pages = {154 -- 159}, language = {en} } @misc{BambachEmdadiSizovaetal., author = {Bambach, Markus and Emdadi, Aliakbar and Sizova, Irina and Hecht, Ulrike and Pyczak, Florian}, title = {Isothermal forging of titanium aluminides without beta-phase — Using non-equilibrium phases produced by spark plasma sintering for improved hot working behavior}, series = {Intermetallics}, volume = {101}, journal = {Intermetallics}, issn = {0966-9795}, doi = {10.1016/j.intermet.2018.07.004}, pages = {44 -- 55}, language = {en} } @misc{BambachSizova, author = {Bambach, Markus and Sizova, Irina}, title = {Hot working behavior of selective laser melted and laser metal deposited Inconel 718}, series = {Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018}, journal = {Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018}, editor = {Fratini, Livan and Di Lorenzo, Rosa and Buffa, Gianluca and Ingarao, Guiseppe}, publisher = {AIP Publishing}, address = {Melville, New York}, isbn = {978-0-7354-1663-5}, doi = {10.1063/1.5035058}, language = {en} } @misc{BambachSizovaSilzeetal., author = {Bambach, Markus and Sizova, Irina and Silze, Frank and Schnick, Michael}, title = {Comparison of laser metal deposition of Inconel 718 from powder, hot and cold wire}, series = {Procedia CIRP}, volume = {74}, journal = {Procedia CIRP}, issn = {2212-8271}, doi = {10.1016/j.procir.2018.08.095}, pages = {206 -- 209}, abstract = {10th CIRP conference on Photonic Technologies LANE 2018, September 03 - 06, 2018, F{\"u}rth, Germany}, language = {en} } @misc{BambachSizovaEmdadi, author = {Bambach, Markus and Sizova, Irina and Emdadi, Aliakbar}, title = {Towards Damage Controlled Hot Forming}, series = {Applied Mechanics and Materials}, volume = {85}, journal = {Applied Mechanics and Materials}, issn = {1662-7482}, doi = {10.4028/www.scientific.net/AMM.885.56}, pages = {56 -- 63}, language = {en} } @misc{BambachSizovaEmdadi, author = {Bambach, Markus and Sizova, Irina and Emdadi, Aliakbar}, title = {Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting}, series = {Journal of Manufacturing Processes}, volume = {37}, journal = {Journal of Manufacturing Processes}, issn = {1526-6125}, doi = {10.1016/j.jmapro.2018.11.011}, pages = {150 -- 158}, language = {en} } @misc{HirtlerSydowBambachetal., author = {Hirtler, Markus and Sydow, Benjamin and Bambach, Markus and Sizova, Irina and Ali, Y. and Sviridov, Alexander and Bergmann, Jean Pierre}, title = {Kombination von umformender und additiver Fertigungsverfahren zu einer ressourceneffizienten Prozesskette}, series = {DGM-Tagungsband: Fachtagung Werkstoffe und Additive Fertigung, 25.-26.04.2018, Potsdam}, journal = {DGM-Tagungsband: Fachtagung Werkstoffe und Additive Fertigung, 25.-26.04.2018, Potsdam}, isbn = {978-3-88355-418-1}, pages = {73 -- 83}, language = {de} } @misc{BambachSizovaGeisenetal., author = {Bambach, Markus and Sizova, Irina and Geisen, Ole and Fergani, Omar}, title = {Comparison of the Hot Working Behavior of Wrought, Selective Laser Melted and Electron Beam Melted Ti-6Al-4V}, series = {Materials Science Forum; Trans Tech Publications}, volume = {941}, journal = {Materials Science Forum; Trans Tech Publications}, issn = {1662-9752}, doi = {10.4028/www.scientific.net/MSF.941.2030}, pages = {2030 -- 2036}, language = {en} } @misc{StendalBambachEisentrautetal., author = {Stendal, Johan Andreas and Bambach, Markus and Eisentraut, Mark and Sizova, Irina and Weiß, Sabine}, title = {Applying Machine Learning to the Phenomenological Flow Stress Modeling of TNM-B1}, series = {Metals}, volume = {9}, journal = {Metals}, number = {2}, issn = {2075-4701}, doi = {10.3390/met9020220}, pages = {18}, abstract = {Data-driven or machine learning approaches are increasingly being used in material science and research. Specifically, machine learning has been implemented in the fields of materials discovery, prediction of phase diagrams and material modelling. In this work, the application of machine learning to the traditional phenomenological flow stress modelling of the titanium aluminide (TiAl) alloy TNM-B1 (Ti-43.5Al-4Nb-1Mo-0.1B) is investigated. Three model types were developed, analyzed and compared; a physics-based phenomenological model (PM) originally developed for steel by Cingara and McQueen, a purely data-driven machine learning model (MLM), and a hybrid model (HM), which uses characteristic points predicted by a learning algorithm as input for the phenomenological model. The same amount of data was used to both fit the PM and train the MLM and HM. The models were analyzed and compared based on the accuracy of their predictions, development and computing time, and their ability to predict on interpolated and extrapolated inputs. The results revealed that for the same amount of experimental data, the MLM was more accurate than the PM. In addition, the MLM was better able to capture the characteristic peak stress in the TNM-B1 the flow curves, and could be developed and computed faster. Furthermore, the MLM was able to make realistic predictions for inputs outside the experimental data used for training. The HM showed comparable accuracy to the PM for the experimental conditions. However, the HM was able to produce a better fit for input conditions outside the training data.}, language = {en} } @misc{EisentrautBolzSizovaetal., author = {Eisentraut, Mark and Bolz, Sebastian and Sizova, Irina and Bambach, Markus and Weiß, Sabine}, title = {Development of a heat treatment strategy for the γ-TiAl based alloy TNM-B1 to increase the hot workability}, series = {SN Applied Sciences}, volume = {1}, journal = {SN Applied Sciences}, number = {11}, issn = {2523-3963}, doi = {10.1007/s42452-019-1563-4}, pages = {8}, language = {en} } @misc{SizovaHirtlerGuentheretal., author = {Sizova, Irina and Hirtler, Markus and G{\"u}nther, Martin and Bambach, Markus}, title = {Wire-arc additive manufacturing of pre-forms for forging of a Ti-6Al-4V turbine blade}, series = {AIP Conference Proceedings}, volume = {2113}, journal = {AIP Conference Proceedings}, isbn = {978-0-7354-1847-9}, doi = {10.1063/1.5112693}, language = {en} } @misc{StendalEisentrautSizovaetal., author = {Stendal, Johan Andreas and Eisentraut, Mark and Sizova, Irina and Bolz, Sebastian and Bambach, Markus and Weiß, Sabine}, title = {Effect of heat treatment on the workability of hot isostatically pressed TNM-B1}, series = {AIP Conference Proceedings}, volume = {2113}, journal = {AIP Conference Proceedings}, number = {1}, isbn = {978-0-7354-1847-9}, doi = {10.1063/1.5112544}, language = {en} } @misc{EmdadiSizovaBambachetal., author = {Emdadi, Aliakbar and Sizova, Irina and Bambach, Markus and Hecht, Ulrike}, title = {Hot deformation behavior of a spark plasma sintered Fe-25Al-1.5Ta alloy with strengthening Laves phase}, series = {Intermetallics}, volume = {Vol. 109}, journal = {Intermetallics}, issn = {0966-9795}, doi = {10.1016/J.intermet.2019.03.017}, pages = {123 -- 134}, language = {en} } @misc{SilzeSchnickSizovaetal., author = {Silze, Frank and Schnick, Michael and Sizova, Irina and Bambach, Markus}, title = {Laser Metal Deposition of Ti-6Al-4V with a Direct Diode Laser Set-up and Coaxial Material Feed}, series = {Procedia Manufacturing}, volume = {47}, journal = {Procedia Manufacturing}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.156}, pages = {1154 -- 1158}, language = {en} } @misc{MeinersIhneJuergensetal., author = {Meiners, Frank and Ihne, J{\"o}rg and J{\"u}rgens, Pascal and Hemes, Susanne and Mathes, Michael and Sizova, Irina and Bambach, Markus and Hama-Saleh, Rebar and Weisheit, Andreas}, title = {New Hybrid Manufacturing Routes Combining Forging and Additive Manufacturing to Efficiently Produce High Performance Components from Ti-6Al-4V}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.215}, pages = {261 -- 267}, language = {en} } @misc{DonchevaBambachSeifertSizova, author = {Doncheva Bambach, Margarita and Seifert, Daniel and Sizova, Irina}, title = {Intensive Forming of Grade 5 Titanium Bars with Increased Performance for Aerospace Applications}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.229}, pages = {288 -- 294}, language = {en} } @misc{MishurovaSydowThiedeetal., author = {Mishurova, Tatjana and Sydow, Benjamin and Thiede, Tobias and Sizova, Irina and Ulbricht, Alexander and Bambach, Markus and Bruno, Giovanni}, title = {Residual Stress and Microstructure of a Ti-6Al-4V Wire Arc Additive Manufacturing Hybrid Demonstrator}, series = {Metals}, volume = {6}, journal = {Metals}, number = {10}, issn = {2075-4701}, doi = {10.3390/met10060701}, language = {en} } @misc{BambachSizovaSydowetal., author = {Bambach, Markus and Sizova, Irina and Sydow, Benjamin and Hemes, Susanne and Meiners, Frank}, title = {Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing}, series = {Journal of Materials Processing Technology}, journal = {Journal of Materials Processing Technology}, number = {Vol. 282}, issn = {0924-0136}, doi = {10.1016/j.jmatprotec.2020.116689}, pages = {8}, language = {en} } @misc{AlimovSizovaBibaetal., author = {Alimov, Artem and Sizova, Irina and Biba, Nikolai and Bambach, Markus}, title = {Prediction of Mechanical Properties of Ti-6Al-4V Forgings Based on Simulation of Microstructure Evolution}, series = {Procedia Manufacturing : 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing : 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/J.promfg.2020.04.326}, pages = {1468 -- 1475}, language = {en} } @misc{EmdadiSizovaStryzhyborodaetal., author = {Emdadi, Aliakbar and Sizova, Irina and Stryzhyboroda, Oleg and Hecht, Ulrike and Buhl, Johannes and Bambach, Markus}, title = {Hot Workability of a Spark Plasma Sintered Intermetallic Iron Aluminide Alloy Above and Below the Order-disorder Transition Temperature}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.238}, pages = {1281 -- 1287}, language = {en} } @misc{StendalEisentrautSizovaetal., author = {Stendal, Johan Andreas and Eisentraut, Mark and Sizova, Irina and Bolz, Sebastian and Weiß, Sabine and Bambach, Markus}, title = {Accelerated hot deformation and heat treatment of the TiAl alloy TNM-B1 for enhanced hot workability and controlled damage}, series = {Journal of Materials Processing Technology}, volume = {Vol. 291}, journal = {Journal of Materials Processing Technology}, issn = {0924-0136}, doi = {10.1016/j.jmatprotec.2020.116999}, pages = {12}, language = {en} } @misc{HemesMeinersSizovaetal., author = {Hemes, Susanne and Meiners, Frank and Sizova, Irina and Hama-Saleh, Rebar and R{\"o}hrens, Daniel and Weisheit, Andreas and H{\"a}fner, Constantin Leon and Bambach, Markus}, title = {Microstructures and Mechanical Properties of Hybrid, Additively Manufactured Ti6Al4V after Thermomechanical Processing}, series = {Materials}, volume = {14}, journal = {Materials}, number = {4}, issn = {1996-1944}, doi = {10.3390/ma14041039}, language = {en} } @misc{BambachSizovaSzyndleretal., author = {Bambach, Markus and Sizova, Irina and Szyndler, Joanna and Bennett, Jennifer and Hyatt, Greg and Cao, Jian and Papke, Thomas and Merklein, Marion}, title = {On the hot deformation behavior of Ti-6Al-4V made by additive manufacturing}, series = {Journal of Materials Processing Technology}, volume = {288}, journal = {Journal of Materials Processing Technology}, issn = {0924-0136}, doi = {10.1016/j.jmatprotec.2020.116840}, language = {en} } @misc{SizovaSviridovBambachetal., author = {Sizova, Irina and Sviridov, Alexander and Bambach, Markus and Eisentraut, Mark and Hemes, Susanne and Hecht, Ulrike and Marquardt, Axel and Leyens, Christoph}, title = {A study on hot-working as alternative post-processing method for titanium aluminides built by laser powder bed fusion and electron beam melting}, series = {Journal of Materials Processing Technology}, volume = {291}, journal = {Journal of Materials Processing Technology}, issn = {0924-0136}, doi = {10.1016/j.jmatprotec.2020.117024}, pages = {14}, language = {en} } @misc{BambachImranSizovaetal., author = {Bambach, Markus and Imran, Muhammad and Sizova, Irina and Buhl, Johannes and Gerster, Stephan and Herty, Michael}, title = {A soft sensor for property control in multi-stage hot forming based on a level set formulation of grain size evolution and machine learning}, series = {Advances in Industrial and Manufacturing Engineering}, journal = {Advances in Industrial and Manufacturing Engineering}, number = {2}, issn = {2666-9129}, doi = {10.1016/j.aime.2021.100041}, pages = {13}, language = {en} } @misc{HemesKochHamaSalehetal., author = {Hemes, Susanne and Koch, Waldemar and Hama-Saleh, Rebar and Sizova, Irina and Meiners, Frank and Mathes, Michael and Bambach, Markus and Weisheit, Andreas and Schleifenbaum, Johannes Henrich}, title = {Microstructural and Mechanical Analysis of High-Performance Parts Produced by Hybrid Additive Manufacturing of Powder LMD on Forged Base Components}, series = {Advanced Materials Research}, volume = {Vol. 1161}, journal = {Advanced Materials Research}, issn = {1662-8985}, doi = {10.4028/www.scientific.net/AMR.1161.85}, pages = {85 -- 93}, language = {en} } @misc{BambachSizovaKiesetal., author = {Bambach, Markus and Sizova, Irina and Kies, Fabian and Haase, Christian}, title = {Directed energy deposition of Inconel 718 powder, cold and hot wire using a six-beam direct diode laser set-up}, series = {Additive Manufacturing}, volume = {Vol. 47}, journal = {Additive Manufacturing}, issn = {2214-8604}, doi = {10.1016/j.addma.2021.102269}, pages = {12}, language = {en} } @incollection{SviridovSizovaBambach, author = {Sviridov, Alexander and Sizova, Irina and Bambach, Markus}, title = {Fast Development of New Alloys for Metal Forming Using Additive Manufacturing}, series = {Forming the Future : Proceedings of the 13th International Conference on the Technology of Plasticity}, booktitle = {Forming the Future : Proceedings of the 13th International Conference on the Technology of Plasticity}, editor = {Daehn, Glenn}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-75380-1}, issn = {2367-1181}, doi = {10.1007/978-3-030-75381-8_158}, pages = {1893 -- 1902}, language = {en} } @misc{ImranDeillonSizovaetal., author = {Imran, Muhammad and Deillon, L{\´e}a and Sizova, Irina and Neirinck, Bram and Bambach, Markus}, title = {Process optimization and study of the co-sintering behaviour of Cu-Ni multi-material 3D structures fabricated by spark plasma sintering (SPS)}, series = {Materials \& Design}, volume = {Vol. 223}, journal = {Materials \& Design}, issn = {0264-1275}, doi = {10.1016/j.matdes.2022.111210}, language = {en} }