@misc{FroeschkeBesthaFuckeetal., author = {Froeschke, Samuel and Bestha, Kranthi Kumar and Fucke, Rico and Schiemenz, Sandra and Popov, Alexey and Naumann, Marco and Knupfer, Martin and Giebeler, Lars and Wolf, Daniel and Kizhake Malayil, Ranjith Kumar and Sivan, Saramgi Chencheriparambil and Grafe, Hans-Joachim and Gräßler, Nico and Corredor, Laura T. and Wolter, Anja U. B. and B{\"u}chner, Bernd and Schmidt, Peer and Hampel, Silke}, title = {Structural and Magnetic Transitions Caused by Dimer Formation in the CrCl3-MoCl3 Solid Solution}, series = {Chemistry of Materials}, volume = {36}, journal = {Chemistry of Materials}, number = {9}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.3c03109}, pages = {4240 -- 4253}, abstract = {In this work, we apply the concept of solid solutions to the two 2D transition metal trihalides CrCl3 and MoCl3. While CrCl3 belongs to the magnetically active CrX3 family, the magnetism in MoCl3 is intrinsically suppressed by the formation of aligned Mo-Mo dimers, which also distort the regular honeycomb lattice that is typical for the 2D transition metal trihalides. We report suitable synthesis conditions for the gapless solid solution and crystal growth by chemical vapor transport. The CrCl3-MoCl3 solid solution was initially synthesized at 650 °C for 100 h under addition of MoCl5 as mineralizer, and bulk crystals were subsequently grown by vapor transport in a temperature gradient from 600 °C → 550 °C for 60 h. The obtained solid solution exhibits multiple composition-dependent phase transitions at room temperature, as confirmed by powder X-ray diffraction measurements. The possible presence of Mo-Mo dimers in the solid solution was further investigated by infrared, Raman, electron energy loss, and nuclear quadrupole resonance spectroscopies. The combined results indicate that the Mo-Mo dimers are present over a wide range of compositions. Their orientation changes from parallel alignment for compositions from 70\% ≤ c(Mo3+) ≤ 100\% to random orientation for samples with c(Mo3+) < 70\% content, which significantly affects the course of lattice parameters. Finally, the magnetic properties of the powder samples show a correlation between the Mo3+ content and the transition temperature into the low-temperature phase.}, language = {en} } @misc{FroeschkeYasmenPopovetal., author = {Froeschke, Samuel and Yasmen, Nadia and Popov, Alexey and Schiemenz, Sandra and Wolf, Daniel and Giebeler, Lars and Hantusch, Martin and Gr{\"a}ßler, Nico and B{\"u}chner, Bernd and Schmidt, Peer and Hampel, Silke}, title = {Controlled Nanoplatelet Deposition of 2D Chromium Trihalide Solid Solutions}, series = {Chemistry of Materials}, volume = {35}, journal = {Chemistry of Materials}, number = {11}, issn = {1520-5002}, doi = {10.1021/acs.chemmater.2c03785}, pages = {4136 -- 4148}, abstract = {The two-dimensional (2D) chromium trihalides CrCl3, CrBr3, and CrI3 are most famous for their exotic magnetic properties when their crystals get downscaled to nanometer dimensions. One way to tune the properties of such materials and to further increase their potential utility, e.g., in spintronics, is the formation of solid solutions. Here, we present a detailed theoretical and experimental study on the synthesis and nanoplatelet growth of CrBrxCl3-x and CrBrxI3-x solid solutions. Phase pure powder was obtained by tempering the respective parent compounds at 600 and 550 °C, using additional iodine in the case of CrBrxI3-x. The dominant stacking order changes at x = 1.8 for CrBrxCl3-x while remaining similar to CrI3 for the whole CrBrxI3-x series. A consecutive chemical vapor transport from 575 → 525 °C for 2 h (CrBrxCl3-x) or 600 → 550 °C for 3 h with 0.1 mmol additional iodine (CrBrxI3-x) resulted in the deposition of high-quality nanoplatelets on a substrate with only several nanometers in height. The composition can be controlled by the choice of the starting material, since only small shifts in the anion ratio occur during the transport. The deposited CrBrxCl3-x nanoplatelets can then be easily delaminated by ultrasonication in ethanol to reduce the height even further to few-layer dimensions. These nanoplatelets could potentially be used to investigate the property changes (e.g., in terms of magnetic response) for the downscaling of these solid solutions. We further demonstrate the quality of the deposited material by transmission electron microscopy, selected area electron diffraction, and X-ray photoelectron spectroscopy. Raman spectroscopy of the solid solution series reveals a complex evolution of vibrational modes. Photoluminescence measurements on solid solution samples show emission peaks in the near-infrared energy range with the specific energy and intensity being composition and temperature dependent.}, language = {en} } @misc{FroeschkeSchrothSteineretal., author = {Froeschke, Samuel and Schroth, Karl-Georg and Steiner, Udo and Popov, Alexey and Schiemenz, Sandra and Wolf, Daniel and Giebeler, Lars and Gr{\"a}ßler, Nico and B{\"u}chner, Bernd and Schmidt, Peer and Hampel, Silke}, title = {Understanding the chemistry of 2D rhodium trihalide solid solutions: tuning of optical properties and nanocrystal deposition}, series = {2D Materials}, volume = {10}, journal = {2D Materials}, number = {3}, issn = {2053-1583}, doi = {10.1088/2053-1583/acd012}, pages = {1 -- 12}, abstract = {In the search for novel 2D materials with potentially valuable properties, such as a tunable band gap for optoelectronic or catalytic applications, solid solutions hold the potential to significantly expand the inventory of available 2D nanomaterials. In this study, we present for the first time the synthesis of such 2D rhodium trihalide solid solutions: RhBrxCl3-x and RhBrxI3-x. We use thermodynamic simulations and simultaneous thermal analysis to predict conditions for their rational synthesis and to investigate suitable chemical vapor transport (CVT) parameters for these solid solutions. The evolution of the lattice parameters was investigated by powder x-ray diffraction, showing an isostructural relationship of the synthesized compounds and only minor deviation from Vegard's law. The optical band gap of these materials can be tuned in an energy range from 1.5 eV (RhCl3) to 1.2 eV (RhI3) by choosing the composition of the solid solution, while the samples also exhibit photoluminescence in similar energy ranges. Ultimately, the successful deposition of bulk as well as ultrathin 2D nanocrystals of RhBrxCl3-x by CVT from 925 °C to 850 °C is shown, where the composition of the deposited crystals is precisely controlled by the choice of the starting composition and the initial amount of material. The high quality of the obtained nanocrystals is confirmed by atomic force microscopy, high resolution transmission electron microscopy and selected area electron diffraction. For RhBrxI3-x, the CVT from 900 °C to 825 °C is more difficult and has only been practically demonstrated for an exemplary case. According to the observed properties, these novel solid solutions and nanocrystals show a great potential for an application in optoelectronic devices.}, language = {en} } @misc{VinokurovaKnorrEfimovaetal., author = {Vinokurova, Ekaterina and Knorr, Monika and Efimova, Anastasia and Ovchinnikov, Alexander and Schmidt, Peer and B{\"u}chner, Bernd and Isaeva, Anna and Roslova, Maria}, title = {Microstructural evolution of layered K-doped RuCl3 during annealing traced by thermogravimetric analysis and 3D electron diffraction}, series = {Zeitschrift f{\"u}r Anorgische und Allgemeine Chemie}, volume = {649}, journal = {Zeitschrift f{\"u}r Anorgische und Allgemeine Chemie}, number = {19}, issn = {0044-2313}, doi = {10.1002/zaac.202300141}, pages = {1 -- 8}, abstract = {Nanoscale phase separation was induced in the K-doped RuCl3 van der Waals material by annealing, and studied with the goal to find a natural design strategy for the formation of two-dimensional architectures as an alternative to the costly and time-consuming experimental artificial growth methods. Phase conversion was traced by means of thermogravimetric analysis combined with mass spectrometry. The local crystal structure of co-existing K3Ru2Cl9 domains with the sizes of about 100 nm was solved by 3D electron diffraction.}, language = {en} } @misc{PutzeRitschelChekhoninetal., author = {Putze, Philipp and Ritschel, Tobias and Chekhonin, Paul and Geck, Jochen and Wolf, Daniel and Popov, Alexey and B{\"u}chner, Bernd and Schmidt, Peer and Hampel, Silke}, title = {Creating chirality in WSe₂ through screw dislocations by chemical vapor transport}, series = {Nanoscale horizons}, volume = {10}, journal = {Nanoscale horizons}, number = {5}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, doi = {10.1039/D4NH00567H}, pages = {944 -- 956}, abstract = {Screw dislocation-driven nanostructures of two-dimensional transition metal dichalcogenides (2D TMDs) can feature chirality that enables prominent asymmetric optical properties. One of the outstanding representatives is WSe₂ as it can exhibit intriguing new size and shape-dependent chemical and physical properties compared to its bulk counterpart. Crystal growth control in nanostructures with screw dislocation-driven growth is central for exploiting their structure-related properties. However, bottom-up syntheses of 2D TMDs usually contain 'trial and error' approaches. Here we report on the rational synthesis planning and realizing for the binary system W:Se to achieve chirality in nano-scale crystals by chemical vapor transport (CVT). For that purpose, key parameters were modelled based on thermodynamic datasets. Thus, crystal growth by CVT under addition of SeCl4 succeeds for right-handed spiral nanocrystals from 850 °C to 800 °C with a dwell time of 60 min, while left-handed spirals are obtained from 915 °C to 860 °C. Surface-fused SiO₂ nanoparticles on an Si(100) substrate served as potential nucleation points. Chirality of screwed WSe₂ was unprecedentedly investigated by circular-polarized Raman Spectroscopy and showed an intensity increase of the E¹₂g mode of 29\% and 15\% for right and left-handed spirals, respectively. Pyramid-like WSe2 analyzed by atomic force microscopy exhibits step heights of around 10 nm. Electron backscatter diffraction patterns reveal a convex curvature for WSe₂ with the curvature radii determined as Rx = (270 ± 32) μm and Ry = (141 ± 9) μm, respectively.}, language = {en} } @misc{PutzeWolfChekhoninetal., author = {Putze, Philipp and Wolf, Daniel and Chekhonin, Paul and Popov, Alexey and Ritschel, Tobias and Lubk, Axel and Geck, Jochen and B{\"u}chner, Bernd and Schmidt, Peer and Hampel, Silke}, title = {Twisted and screw dislocation-driven growth of MoSe₂ nanostructures by chemical vapor transport}, series = {Nano research}, journal = {Nano research}, number = {18}, publisher = {Tsinghua University Press}, issn = {1998-0000}, doi = {10.26599/NR.2025.94908020}, pages = {1 -- 23}, abstract = {Twisted multilayers of two-dimensional materials attract widespread research interest due to their intriguing electronic and optical properties related to their chiral symmetry breaking and Moir{\´e} effects. The two-dimensional transition metal dichalcogenide MoSe₂ is a particular promising material for twisted multilayers, capable of sustaining Moir{\´e} excitons. Here, we report on a rational bottom-up synthesis approach for twisted MoSe₂ flakes by chemical vapor transport (CVT). Screw dislocation-driven growth was forced by surface-fused SiO₂ nanoparticles on the substrates that serve as potential nucleation points in low supersaturation condition. Thus, crystal growth by in-situ CVT under addition of MoCl₅ leads to bulk 2H-MoSe₂ in a temperature gradient from 900 °C to 820 °C with a dwell time of 96 h. Hexagonally shaped 2H-MoSe₂ flakes were grown from 710 °C to 685 °C with a dwell time of 30 min on SiO₂@Al₂O₃(0001) substrates. Electron backscatter diffraction as well as electron microscopy reveals the screw dislocation-driven growth of triangular 3R-MoSe₂ with individual step heights between 0.9 nm and 2.9 nm on SiO₂@Si(100) under the same conditions. Finally, twisted MoSe₂ flakes exhibiting a twist angle of 19° with respect to the [010] zone axis could be synthesized.}, language = {en} } @misc{MichalkBartholomaeusSchmidt, author = {Michalk, Silke and Bartholom{\"a}us, Heike and Schmidt, Peer}, title = {Von starren Grenzen zu freien Wegen : die Entfaltung von Bildungspotenzialen}, series = {University:Future Festival (U:FF), 13. bis 15. Mai 2025}, journal = {University:Future Festival (U:FF), 13. bis 15. Mai 2025}, abstract = {Wie kann Studium neu gedacht werden? Die BTU Cottbus-Senftenberg diskutiert ein zukunftsf{\"a}higes Hochschulmodell, das Profillinien, Microcredentials und Future Skills integriert. Im Rahmen der Neugestaltung der Rahmenstudienordnungen und im Kontext der Empfehlungen des Wissenschaftsrates zur Weiterentwicklung des Hochschulsystems Brandenburg entsteht ein zukunftsf{\"a}higes Hochschulmodell, das Durchl{\"a}ssigkeit, Flexibilit{\"a}t und Qualit{\"a}t vereint. Der Transformationsprozess setzt auf die Schaffung individueller Bildungswege entlang des gesamten, weiter gefassten Student Life Cycles, wodurch die Attraktivit{\"a}t des Studiums und der Studienerfolg gesteigert werden.}, language = {de} } @techreport{SchmidtGieseHeinemannetal., author = {Schmidt, Peer and Giese, Marie and Heinemann, Robert and Nawdiyal, Amruta and Knorr, Monika and Breitkopf, Cornelia and Schneegans, Marcel Felix and Pinnau, Sebastian and Lorenz, Tommy and Mickoleit, Erik and to Baben, Moritz and Keuter, Philipp and M{\"u}ller, Michael and Sergeev, Dmitry and Ewaznezhad Fard, Darya and Morsa, Amedeo and Rhys, Dominic Jacob and Yazhenskikh, Elena}, title = {PCM-Screening-2 : Evaluierung eutektischer Gemische f{\"u}r den Einsatz als PCM : thermodynamische Modellierung und experimentelle Methoden - 2}, series = {Deutsche Forschungsberichte}, journal = {Deutsche Forschungsberichte}, doi = {10.34657/28504}, pages = {182}, abstract = {Durch den Einsatz von W{\"a}rme- und K{\"a}ltespeichern in Geb{\"a}uden, Industrieanlagen und Kraftwerken k{\"o}nnen Lastschwankungen reduziert und die Anlageneffizienz verbessert werden. Latentw{\"a}rmespeicher (PCM) erm{\"o}glichen durch Ausnutzung einer fest-fl{\"u}ssig Phasenumwandlung hohe Speicherdichten bei geringen Temperaturdifferenzen. Die Verf{\"u}gbarkeit geeigneter und kosteng{\"u}nstiger PCM's ist derzeit noch eingeschr{\"a}nkt. Ein Screening geeigneter Stoffsysteme zur Bildung multin{\"a}rer Eutektika durch thermodynamische Modellierung der Phasengleichgewichte erlaubt fundierte Vorhersagen zur Zusammensetzung eutektischer Gemische, ihren Schmelztemperaturen und -enthalpien. Auf Basis der Literatur, umfangreicher experimenteller Untersuchungen und Simulationen wurde im Projekt eine im Temperaturbereich nicht eingeschr{\"a}nkte thermochemische Datenbank f{\"u}r das komplexe Stoffsystem Na+, K+, Ca2+, Mg2+ // Cl-, NO3-, SO4_2-, CO3_2- // H2O geschaffen, die eine Auswahl neuer PCM mit optimalen thermodynamischen Eigenschaften f{\"u}r spezifische Prozessanforderungen auf Basis von in Deutschland in großen Mengen verf{\"u}gbaren, preiswerten Rohstoffen erm{\"o}glicht. Weiterhin wurde ein CalPhaD-basiertes Viskosit{\"a}tsmodell, ein Screening-Verfahren inkl. Webserver und intuitive Visualisierungsm{\"o}glichkeiten hochkomponentiger Systeme entwickelt. Mittels eines Screenings erfolgte eine Vorauswahl von potentiell als PCM geeigneten Gemischen, die umfangreich charakterisiert wurden. Auf Basis der vielversprechenden Speicherdichten und der niedrigen Materialkosten wird erwartet, dass ein oder mehrere dieser identifizierten PCMs in die Anwendung als thermische Speicher gebracht werden k{\"o}nnen.}, language = {de} }