@incollection{UlrichSchlegelMertensetal., author = {Ulrich, Rainer G. and Schlegel, Matthias and Mertens, Marc and Groschup, Martin H. and Schmidt-Chanasit, Jonas and Plenge-B{\"o}nig, Anita and Jacob, Jens and Pelz, Hans-Joachim and Freise, Jona and Wenk, Matthias and Thiel, J{\"o}rg and Triebenbacher, Cornelia and Schmolz, Eric and Kurth, Andreas and Kr{\"u}ger, Frank and R{\"u}he, Ferdinand and Kiffner, Christian and Ansorge, Hermann and Gerwin, Werner and Wegener, Wolfgang and M{\"u}ller, J{\"o}rg and Bemmann, Margit and Wolf, Ronny and Otto, Lutz-Florian and Oehme, Rainer and Pfeffer, Martin and Heckel, Gerald and Schex, Susanne and Essbauer, Sandra S.}, title = {Netzwerk Nagetier-{\"u}bertragene Pathogene: Monitoring von Hantavirus-Infektionen in Deutschland}, series = {Wildhygiene, Wildtierkrankheiten, Parasiten, Epidemiologie}, booktitle = {Wildhygiene, Wildtierkrankheiten, Parasiten, Epidemiologie}, publisher = {Ges. f{\"u}r Wildtier- und Jagdforschung}, address = {Halle/Saale}, isbn = {978-378-88131-2-3}, issn = {1436-3895}, pages = {229 -- 250}, language = {de} } @misc{PfetschFuegenschuhGeissleretal., author = {Pfetsch, Marc E. and F{\"u}genschuh, Armin and Geißler, Bj{\"o}rn and Geißler, Nina and Gollmer, Ralf and Hiller, Benjamin and Humpola, Jesco and Koch, Thorsten and Lehmann, Thomas and Martin, Alexander and Morsi, Antonio and R{\"o}vekamp, Jessica and Schewe, Lars and Schmidt, Martin and Schultz, R{\"u}diger and Schwarz, Robert and Schweiger, Jonas and Stangl, Claudia and Steinbach, Marc C. and Vigerske, Stefan and Willert, Bernhard M.}, title = {Validation of Nominations in Gas Network Optimization: Models, Methods, and Solutions}, series = {Optimization Methods and Software}, volume = {30}, journal = {Optimization Methods and Software}, number = {1}, issn = {1055-6788}, doi = {10.1080/10556788.2014.888426}, pages = {15 -- 53}, language = {en} } @misc{GroenkeArroziBronkallaetal., author = {Gr{\"o}nke, Martin and Arrozi, Ubed S. F. and Bronkalla, Nadine and Schmidt, Peer and Valldor, Martin and Oswald, Steffen and Woodcock, Thomas G. and Eckert, Victoria and Hao, Qi and Pl{\"u}schke, Laura and Lederer, Albena and Nielsch, Kornelius and B{\"u}chner, Bernd and Kaskel, Stefan and Hampel, Silke}, title = {Layered α-TiCl₃: Microsheets on YSZ Substrates for Ethylene Polymerization with Enhanced Activity}, series = {Chemistry of Materials}, volume = {31}, journal = {Chemistry of Materials}, number = {14}, doi = {10.1021/acs.chemmater.9b01818}, pages = {5305 -- 5313}, abstract = {The transition metal halide α-titanium(III) chloride (α-TiCl₃) is a layered two-dimensional compound and a well-established Ziegler-Natta catalyst for the polymerization of ethylene. A new synthesis technique is used to obtain thin sheets of α-TiCl₃ that show exceptional physical properties in contrast to their bulk counterparts, due to an enlarged surface-to-volume ratio. Chemical vapor transport (CVT) of α-titanium(III) chloride directly on substrates results in microsheets that exhibit an improved catalytic effect. For rational planning of synthesis conditions, thermodynamic simulations of occurring gas-phase equilibria were performed. Based on these calculation results, crystal growth was achieved by adding GaCl₃via pure short term CVT in a temperature gradient of 700-600 K on yttrium-stabilized zirconia (YSZ) substrates. Phase pure, as-grown, single crystal sheets with high crystallinity and a thickness of around 4 μm were obtained. These thin sheets of α-TiCl₃ on YSZ substrates were implemented as catalysts for the ethylene polymerization reaction. A significant improvement of catalytic activity of 16\% was achieved, probably due to an increased surface-to-volume ratio. As a highlight, the as-grown microsheets were exfoliated subsequently to a thickness lower than 200 nm and an even higher catalytic activity of up to 24\% was confirmed experimentally due to delamination effects. This is the first time that an improved catalytic effect of α-TiCl₃ is observed as a result of downscaling from bulk to microsheets by CVT.}, language = {en} } @misc{FuegenschuhGeisslerGollmeretal., author = {F{\"u}genschuh, Armin and Geißler, Bj{\"o}rn and Gollmer, Ralf and Hayn, Christine and Henrion, Ren{\´e} and Hiller, Benjamin and Humpola, Jesco and Koch, Thorsten and Lehmann, Thomas and Martin, Alexander and Mirkov, Radoslava and Morsi, Antonio and R{\"o}vekamp, Jessica and Schewe, Lars and Schmidt, Martin and Schultz, R{\"u}diger and Schwarz, Robert and Schweiger, Jonas and Stangl, Claudia and Steinbach, Marc C. and Willert, Bernhard M.}, title = {Mathematical Optimization for Challenging Network Planning Problems in Un- bundled Liberalized Gas Markets}, series = {Energy Systems}, volume = {5}, journal = {Energy Systems}, number = {3}, issn = {1868-3975}, doi = {10.1007/s12667-013-0099-8}, pages = {449 -- 473}, language = {en} } @misc{GroenkeSchmidtValldoretal., author = {Gr{\"o}nke, Martin and Schmidt, Peer and Valldor, Martin and Oswald, Steffen and Wolf, Daniel and Lubk, Axel and B{\"u}chner, Bernd and Hampel, Silke}, title = {Chemical vapor growth and delamination of α-RuCl3 nanosheets down to the monolayer limit}, series = {Nanoscale}, volume = {10}, journal = {Nanoscale}, number = {40}, issn = {2040-3372}, doi = {10.1039/C8NR04667K}, pages = {19014 -- 19022}, abstract = {2D layered honeycomb magnet α-ruthenium(III) chloride (α-RuCl3) is a promising candidate to realize a Kitaev spin model. As alteration of physical properties on the nanoscale is additionally intended, new synthesis approaches to obtain phase pure α-RuCl3 nanocrystals have been audited. Thermodynamic simulations of occurring gas phase equilibria were performed and optimization of synthesis conditions was achieved based on calculation results. Crystal growth succeeded via chemical vapor transport (CVT) in a temperature gradient of 973 K to 773 K on YSZ substrates. Single crystal sheets of high crystallinity with heights ≤ 30 nm were obtained via pure CVT. The crystal properties were characterized by means of optical and electron microscopy, AFM, SAED, micro-Raman and XPS proving their composition, morphology, crystallinity and phase-purity. A highlight of our study is the successful individualization of nanocrystals and the delamination of nanosheets on YSZ substrates down to the monolayer limit (≤ 1 nm) which was realized by means of substrate exfoliation and ultrasonication in a very reproducible way.}, language = {en} } @misc{GroenkePohfleppSchmidtetal., author = {Gr{\"o}nke, Martin and Pohflepp, Danny and Schmidt, Peer and Valldor, Martin and Oswald, Steffen and Wolf, Daniel and Hao, Qi and Steiner, Udo and B{\"u}chner, Bernd and Hampel, Silke}, title = {Simulation and synthesis of alpha-MoCl₃ nanosheets on substrates by short time chemical vapor transport}, series = {Nano-Structures \& Nano-Objects}, journal = {Nano-Structures \& Nano-Objects}, number = {19}, issn = {2352-507X}, doi = {10.1016/j.nanoso.2019.100324}, pages = {1 -- 7}, abstract = {Alpha-molybdenum(III) chloride (MoCl₃) belongs to layered van-der-Waals materials, which are in focus to exhibit interesting properties due to their weak chemical and magnetic interactions. Especially the structure of alpha-MoCl₃ has been discussed in terms of symmetry breaking dimerization of Mo atoms at room temperature, which might led to exotic ground states. By exploiting the 2D materials characteristics, an investigation of physical properties on the nanoscale is intended. We herein demonstrate the probably first approach to synthesize phase pure, as-grown alpha-MoCl₃ few-layer nanosheets by means of a pure short time chemical vapor transport (CVT) process. Vapor growth benefits from a one-step deposition of high crystalline alpha-MoCl₃ nanosheets without stacking faults on a substrate. Thus, mostly applied subsequent delamination, associated with the introduction of structural defects, becomes redundant. According to the CVT process thermodynamic simulations of gas phase equilibria have been performed and the synthesis conditions could be optimized based on the calculation results. By CVT the as-grown nanolayers are deposited on sapphire (Al₂O₃) substrates by applying a temperature gradient of 70 K from 743 K to 673 K. Single crystalline sheets with thicknesses ≤75 nm down to five layer (3 nm) could be obtained by using a pure CVT process. According to the deposited nanostructures we approve the desired composition, morphology, phase purity and high crystallinity by using several microscopy and spectroscopy techniques. Furthermore, we show micro-RAMAN measurements which hint at a slight increase in phonon energies for nanosheets in comparison to the corresponding bulk phase.}, language = {en} } @misc{FroeschkeWolfHantuschetal., author = {Froeschke, Samuel and Wolf, Daniel and Hantusch, Martin and Giebeler, Lars and Wels, Martin and Gr{\"a}ßler, Nico and B{\"u}chner, Bernd and Schmidt, Peer and Hampel, Silke}, title = {Synthesis of micro- and nanosheets of CrCl3-RuCl3 solid solution by chemical vapour transport}, series = {Nanoscale}, volume = {29}, journal = {Nanoscale}, number = {14}, issn = {2040-3372}, doi = {10.1039/D2NR01366E}, pages = {10483 -- 10492}, abstract = {Solid solutions of 2D transition metal trihalides are rapidly growing in interest for the search for new 2D materials with novel properties at nanoscale dimensions. In this regard, we present a synthesis method for the Cr1-xRuxCl3 solid solution and describe the behaviour of the unit cell parameters over the whole composition range, which in general follows Vegard's law in the range of a = 5.958(6)CrCl3 … 5.9731(5)RuCl3 {\AA}, b = 10.3328(20)CrCl3 … 10.34606(21)RuCl3 {\AA}, c = 6.110(5)CrCl3 … 6.0385(5)RuCl3 {\AA} and β = 108.522(15)CrCl3 … 108.8314(14)RuCl3 °. The synthesized solid solution powder was subsequently used to deposit micro- and nanosheets directly on a substrate by applying chemical vapour transport in a temperature gradient of 575 °C → 525 °C for 2 h and 650 °C → 600 °C for 0.5 h as a bottom-up approach without the need for an external transport agent. The observed chromium chloride enrichment of the deposited crystals is predicted by thermodynamic simulation. The results allow for a nanostructure synthesis of this solid solution with a predictable composition down to about 30 nm in height and lateral size of several μm. When applying a quick consecutive delamination step, it is possible to obtain few- and monolayer structures, which could be used for further studies of downscaling effects for the CrCl3-RuCl3 solid solution. X-ray photoelectron spectroscopy, transmission electron microscopy and Raman spectroscopy were used to confirm the purity and quality of the synthesized crystals.}, language = {en} } @misc{GroenkeBuschbeckSchmidtetal., author = {Gr{\"o}nke, Martin and Buschbeck, Benjamin and Schmidt, Peer and Valldor, Martin and Oswald, Steffen and Hao, Qi and Lubk, Axel and Wolf, Daniel and Steiner, Udo and B{\"u}chner, Bernd and Hampel, Silke}, title = {Chromium Trihalides CrX₃(X = Cl, Br, I): Direct Deposition of Micro- and Nanosheets on Substrates by Chemical Vapor Transport}, series = {Advanced Materials Interfaces}, volume = {6}, journal = {Advanced Materials Interfaces}, number = {24}, issn = {2196-7350}, doi = {10.1002/admi.201901410}, pages = {11}, abstract = {The experimental observation of intrinsic ferromagnetism in single layered chromium trihalides CrX₃ (X = Cl, Br, I) has gained outstanding attention recently due to their possible implementation in spintronic devices. However, the reproducible preparation of highly crystalline chromium(III) halide nanolayers without stacking faults is still an experimental challenge. As chromium trihalides consist of adjacent layers with weak interlayer coupling, the preparation of ultrathin CrX₃ nanosheets directly on substrates via vapor transport proves as an advantageous synthesis technique. It is demonstrated that vapor growth of ultrathin highly crystalline CrX₃ micro- and nanosheets succeeds directly on yttrium stabilized zirconia substrates in a one-step process via chemical vapor transport (CVT) in temperature gradients of 100 K (600°C → 500°C for CrCl₃ and 650°C → 550°C for CrBr₃ or CrI₃) without a need for subsequent delamination. Due to simulation results, optimization of synthesis conditions is realized and phase pure CrX₃ nanosheets with thicknesses ≤25 nm are obtained via short term CVT. The nanosheets morphology, crystallinity, and phase purity are analyzed by several techniques, including microscopy, diffraction, and spectroscopy. Furthermore, a potential subsequent delamination technique is demonstrated to give fast access to CrX₃ monolayers using the example of CrCl₃ .}, language = {en} } @misc{MaternSchmidt, author = {Matern, Antje and Schmidt, Martin}, title = {Sektor{\"u}bergreifende Koordination als Herausforderung nachhaltiger Infrastrukturentwicklung in St{\"a}dten}, series = {Informationen zur modernen Stadtgeschichte}, journal = {Informationen zur modernen Stadtgeschichte}, number = {1}, issn = {0340-1774}, pages = {70 -- 81}, abstract = {Der Beitrag widmet sich der aktuellen Transformation st{\"a}dtischer Infrastrukturen im Spannungsfeld von technologischen Neuerungen und Forderungen nach einer st{\"a}rkeren intersektoralen Koordination einerseits und der Fragmentierung st{\"a}dtischer Ver- und Entsorgung im Zuge der europ{\"a}ischen Liberalisierungspolitiken andererseits. Der Beitrag zielt darauf ab, den Stand und die H{\"u}rden der intersektoralen Koordination zwischen der Energie- und Wasserversorgung sowie der Abwasser- und Abfallentsorgung in deutschen Großst{\"a}dten zu charakterisieren. Die empirische Grundlage bietet ein DFG-Forschungsprojekt zur intersektoralen Koordination st{\"a}dtischer Infra- strukturen im Kontext nachhaltiger Stadtentwicklung. Anhand dieser Grundlage werden die Forderungen der Debatten zu Innovationen an intersektoralen Schnittstellen und Kritischen Infrastrukturen kritisch reflektiert und der Stand der Koordination st{\"a}dtischer Infrastrukturen gespiegelt. Angesichts der Ausdifferenzierungstrends wird gefragt, inwiefern die in den Debatten diskutierten Koordinationserfordernisse gegenw{\"a}rtig in den St{\"a}dten aufgegriffen werden (k{\"o}nnen). Der Beitrag schließt mit einem Blick auf die Perspektiven nachhaltiger, sektor{\"u}bergreifender Infrastrukturplanung und -politik.}, language = {de} } @misc{BimboeseNicolayBryketal., author = {Bimb{\"o}se, Martin and Nicolay, Alexander and Bryk, Alexander and Schmidt, Karl-Heinz and Morche, David}, title = {Investigations on intra- and interannual coarse sediment dynamics in a high-mountain catchment}, series = {Zeitschrift f{\"u}r Geomorphologie : Supplementband}, volume = {55}, journal = {Zeitschrift f{\"u}r Geomorphologie : Supplementband}, number = {2}, doi = {10.1127/0372-8854/2011/0055S2-0046}, pages = {67 -- 81}, language = {en} } @misc{ZeugnerKaiserSchmidtetal., author = {Zeugner, Alexander and Kaiser, Martin and Schmidt, Peer and Menshchikova, Tatiana V. and Rusinov, Igor P. and Markelov, Anton V. and Van den Broek, Wouter and Chulkov, Evgueni V. and Doert, Thomas and Ruck, Michael and Isaeva, Anna}, title = {Modular Design with 2D Topological-Insulator Building Blocks: Optimized Synthesis and Crystal Growth and Crystal and Electronic Structures of BiₓTeI (x = 2, 3)}, series = {Chemistry of Materials}, volume = {29}, journal = {Chemistry of Materials}, number = {3}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.6b05038}, pages = {1321 -- 1337}, abstract = {Structural engineering of topological bulk materials is systematically explored with regard to the incorporation of the buckled bismuth layer [Bi₂], which is a 2D topological insulator per se, into the layered BiTeI host structure. The previously known bismuth telluride iodides, BiTeI and Bi₂TeI, offer physical properties relevant for spintronics. Herewith a new cousin, Bi₃TeI (sp.gr. R3m, a = 440.12(2) pm, c = 3223.1(2) pm), joins the ranks and expands this structural family. Bi₃TeI = [Bi₂][BiTeI] represents a stack with strictly alternating building blocks. Conditions for reproducible synthesis and crystal-growth of Bi₂TeI and Bi₃TeI are ascertained, thus yielding platelet-like crystals on the millimeter size scale and enabling direct measurements. The crystal structures of Bi₂TeI and Bi₃TeI are examined by X-ray diffraction and electron microscopy. DFT calculations predict metallic properties of Bi₃TeI and an unconventional surface state residing on various surface terminations. This state emerges as a result of complex hybridization of atomic states due to their strong intermixing. Our study does not support the existence of new stacking variants BiₓTeI with x > 3; instead, it indicates a possible homogeneity range of Bi₃TeI. The series BiTeI-Bi₂TeI-Bi₃TeI illustrates the influence of structural modifications on topological properties.}, language = {en} } @misc{WelsSchmidt, author = {Wels, Martin and Schmidt, Peer}, title = {Crystal growth of ternary phases with homogeneity range: Modeling and experiments}, series = {Zeitschrift f{\"u}r Anorganische und Allgemeine Chemie}, volume = {642}, journal = {Zeitschrift f{\"u}r Anorganische und Allgemeine Chemie}, number = {18}, issn = {1521-3749}, doi = {10.1002/zaac.201690018}, pages = {1066}, abstract = {Synthesizing crystals of ternary solid solutions M2Q3 (M=Bi, Q=Se, Te) with definite composition requires advanced knowledge on the phase relations in the system. By chemical vapor transport [1] the request of homogeneous crystallization can be fulfilled. The experimental scope gets supported by modeling. A phase diagram of the pseudobinary system generated with FactSage [2] (Fig. 1) provides the thermodynamic parameters of the miscibility gap respectively the solid solution. Additionally, these parameters are used to optimize the processes while chemical vapor transport with iodine [3]. The optimum transport conditions of ϑsource = 500 °C and ϑsink = 450 °C has been applied as for the synthesis of the binary compounds [4]. Both by modeling and experiments the congruent transport can be demonstrated, Fig. 2.}, language = {en} } @misc{ChunSchmidtKucketal., author = {Chun, K. R. Julian and Schmidt, Boris and Kuck, Karl-Heinz and Andresen, Dietrich and Willems, Stefan and Spitzer, Stefan G. and Hoffmann, Ellen and Schumacher, Burghard and Eckardt, Lars and Seidl, Karlheinz and J{\"u}nger, Claus and Horack, Martin and Brachmann, Johannes and Senges, Jochen}, title = {Catheter ablation of atrial fibrillation in the young}, series = {Clinical Research in Cardiology}, volume = {102}, journal = {Clinical Research in Cardiology}, number = {6}, issn = {1861-0684}, doi = {10.1007/s00392-013-0553-6}, pages = {459 -- 468}, language = {en} } @techreport{GoldfriedrichHoffmannMuelleretal., author = {Goldfriedrich, Martin and Hoffmann, Stephanie and M{\"u}ller, Yvonne and Schmidt, Andrea C. and Spallek, Jacob and Stroß, Annette M. and Tallarek, Marie}, title = {Konzeptpapier f{\"u}r einen Modellstudiengang „Gesundheitsp{\"a}dagogik und Gesundheitsdidaktik"}, editor = {Goldfriedrich, Martin and Hurrelmann, Klaus}, publisher = {Universit{\"a}t}, address = {Erfurt}, doi = {10.22032/dbt.52342}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:547-202200367}, pages = {23}, abstract = {Angesichts der immer st{\"a}rker werdenden Diskussion um die Bedeutung von Gesundheit f{\"u}r den schulischen und außerschulischen Bildungs- und Lernprozess und der Risiken wachsender gesundheitlicher Ungleichheit bei Kindern und Jugendlichen (Hurrelmann/Richter 2013, Lampert et al. 2019) ist die Etablierung eines Studienganges „Gesundheitsp{\"a}dagogik und Gesundheitsdidaktik" l{\"a}ngst {\"u}berf{\"a}llig und von besonderer Bedeutung f{\"u}r gesundheitliche Chancengleichheit (Goldfriedrich \& Hurrelmann, 2021a; 2021b). Dieses Konzeptpapier stellt einen Modellstudiengang vor, bei dem insbesondere die Vermittlungsebenen - also die gesundheitsdidaktischen Gegenstandsbereiche - im Vordergrund stehen. Die Ausarbeitungen des Entwurfs basieren auf der Grundlage politischer Bestrebungen, der bisherigen Forschung zur Gesundheitsp{\"a}dagogik und Gesundheitsdidaktik, den Erkenntnissen der Erziehungs- und Gesundheitswissenschaften sowie wissenschaftlichen und interprofessionellen Beitr{\"a}gen des Netzwerks Gesundheitsdidaktik (bestehend aus 33 Expert*innen aus 24 Fachbereichen).}, language = {de} } @techreport{BoettgerFelgentreffHesseetal., author = {B{\"o}ttger, Stefan and Felgentreff, Bernd and Hesse, Gerold and Hloucal, Martin-Joseph and Leßmann, Dieter and Mix, Sebastian and Roselt, Kersten and Safarik, Mathias and Schmidt, J{\"o}rg and Steffan, Christoph and Uhlmann, Wilfried}, title = {Seethermie - Innovative W{\"a}rmeversorgung aus Tagebaurestseen - Schlussbericht}, address = {Leipzig}, pages = {146}, language = {de} } @techreport{SchmidtDonathWelsetal., author = {Schmidt, Peer and Donath, Ines and Wels, Martin and Pinnau, Sebastian and Grau Turuelo, Constantino and Breitkopf, Cornelia and Hack, Klaus and Baben, Moritz to and Reis, Bruno and M{\"u}ller, Michael and Sergeev, Dmitry and Qi, Jia}, title = {PCM Screening - Evaluierung eutektischer Gemische f{\"u}r den Einsatz als PCM: thermodynamische Modellierung und experimentelle Methoden : Energie Speicher: PCM-Screening : Schlussbericht}, publisher = {TIB - Leibniz-Informationszentrum Technik und Naturwissenschaften}, address = {Hannover}, doi = {10.2314/KXP:177643451X}, pages = {163}, abstract = {Ein wichtiges Ziel der Bundesregierung ist der Ausbau des Anteils erneuerbarer Energien an der gesamten Stromerzeugung. Die Entwicklung optimierter W{\"a}rme- und K{\"a}ltespeicher stellt einen wichtigen Baustein bei der Erreichung dieser Zielstellung dar. Elektrisch betriebene W{\"a}rmepumpen und Kompressionsk{\"a}ltemaschinen sowie dezentrale Klein-BHKW bieten in Verbindung mit entsprechend dimensionierten, thermischen Speichern ein großes Potential zum Lastmanagement in Smart Grids und somit zur Netzintegration von Strom aus erneuerbaren Energien. Die im Projekt entwickelte Methodik zur Suche nach neuen Latentspeichermedien kann f{\"u}r ein breites Anwendungsfeld von Heiz- und K{\"u}hlanwendungen in Geb{\"a}uden bis hin zur Kraftwerkstechnik eingesetzt werden. Innerhalb der F{\"o}rdermaßnahme „Anwendungsorientierte Forschung und Entwicklung zur nichtnuklearen Energieforschung" im 6. Energieforschungsprogramm der Bundesregierung wurde durch die Projektarbeiten das Schwerpunktthema Energiespeicher (3.8) adressiert, wobei der Aspekt der Entwicklung neuer Materialien mit reduzierten Kosten f{\"u}r einen wirtschaftlichen Betrieb im Vordergrund stand. Speziell wurden dabei die Unterpunkte 3.8.4 Thermische Speicher zur Weiterentwicklung, Optimierung und Erprobung von PCM sowie 3.8.5 {\"U}bergeordnete Themen mit Modellen und Simulationswerkzeugen f{\"u}r die Auswahl und Bewertung neuer Speichermaterialien adressiert. Die Projektergebnisse besitzen aber auch Ber{\"u}hrungspunkte mit den Schwerpunkten 3.12 Energieeffizienz in Industrie, Gewerbe, Handel und Dienstleistungen sowie 3.4 Solarthermische Kraftwerke, da mit der entwickelten Screening-Methode f{\"u}r diese Anwendungsf{\"a}lle neue W{\"a}rmespeichermaterialien auf der Basis wasserfreier Salze mit h{\"o}heren Prozesstemperaturen gefunden werden k{\"o}nnen. Durch den Einsatz von Methoden zur Modellierung und Simulation von Prozessen erfolgt gleichermaßen die Umsetzung einer energie- und ressourcenschonenden Forschungst{\"a}tigkeit. Das im Projekt entwickelte Vorgehen hilft dabei, einen {\"a}ußerst sparsamen Einsatz von Chemikalien, eine niedrige Belastung der Umwelt durch verringerten Entsorgungsaufwand der verbrauchten Stoffe sowie einen deutlich geringeren Aufwand und Energieeinsatz f{\"u}r die Messtechnik zu erm{\"o}glichen. Damit wurde zugleich das Schwerpunktthema 3.8.5 Modelle und Simulationswerkzeuge f{\"u}r die Auswahl und Bewertung neuer Speichermaterialien angesprochen.}, language = {de} } @book{BaehrBuhlRadowetal., author = {B{\"a}hr, Martin and Buhl, Johannes and Radow, Georg and Schmidt, Johannes and Bambach, Markus and Breuß, Michael and F{\"u}genschuh, Armin}, title = {Stable honeycomb structures and temperature based trajectory optimization for wire-arc additive manufacturing}, address = {Cottbus}, doi = {10.26127/btuopen-5079}, pages = {49}, language = {en} } @misc{BaehrBuhlRadowetal., author = {B{\"a}hr, Martin and Buhl, Johannes and Radow, Georg and Schmidt, Johannes and Bambach, Markus and Breuß, Michael and F{\"u}genschuh, Armin}, title = {Stable honeycomb structures and temperature based trajectory optimization for wire-arc additive manufacturing}, series = {Optimization and Engineering}, volume = {22}, journal = {Optimization and Engineering}, number = {2}, issn = {1573-2924}, doi = {10.1007/s11081-020-09552-5}, pages = {913 -- 974}, abstract = {We consider two mathematical problems that are connected and occur in the layer-wise production process of a workpiece using wire-arc additive manufacturing. As the first task, we consider the automatic construction of a honeycomb structure, given the boundary of a shape of interest. In doing this, we employ Lloyd's algorithm in two different realizations. For computing the incorporated Voronoi tesselation we consider the use of a Delaunay triangulation or alternatively, the eikonal equation. We compare and modify these approaches with the aim of combining their respective advantages. Then in the second task, to find an optimal tool path guaranteeing minimal production time and high quality of the workpiece, a mixed-integer linear programming problem is derived. The model takes thermal conduction and radiation during the process into account and aims to minimize temperature gradients inside the material. Its solvability for standard mixed-integer solvers is demonstrated on several test-instances. The results are compared with manufactured workpieces.}, language = {en} } @incollection{BeisegelBuhlIsraretal., author = {Beisegel, Jesse and Buhl, Johannes and Israr, Rameez and Schmidt, Johannes and Bambach, Martin and F{\"u}genschuh, Armin}, title = {Mixed-Integer Programming Models for Two Metal Additive Manufacturing Methods}, series = {Mathematical Methods for Objects Reconstruction}, booktitle = {Mathematical Methods for Objects Reconstruction}, editor = {Cristiani, Emiliano and Falcone, Maurizio and Tozza, Silvia}, publisher = {Springer}, address = {Heidelberg}, isbn = {978-981-9907-75-5}, pages = {121 -- 155}, language = {en} } @misc{CharisseErusPomponioetal., author = {Chariss{\´e}, Daniel and Erus, Guray and Pomponio, Raymond and Gorges, Martin and Schmidt, Nele and Schneider, Christine and Liepelt-Scarfone, Inga and Riedel, Oliver and Reetz, Kathrin and Schulz, J{\"o}rg B. and Berg, Daniela and Storch, Alexander and Witt, Karsten and Dodel, Richard and Kalbe, Elke and Kassubek, Jan and Hilker-Roggendorf, R{\"u}diger and Baudrexel, Simon}, title = {Brain age and Alzheimer's-like atrophy are domain-specific predictors of cognitive impairment in Parkinson's disease}, series = {Neurobiology of Aging}, volume = {109}, journal = {Neurobiology of Aging}, issn = {0197-4580}, doi = {10.1016/j.neurobiolaging.2021.08.020}, pages = {31 -- 42}, abstract = {Recently, it was shown that patients with Parkinson's disease (PD) who exhibit an "Alzheimer's disease (AD)-like" pattern of brain atrophy are at greater risk for future cognitive decline. This study aimed to investigate whether this association is domain-specific and whether atrophy associated with brain aging also relates to cognitive impairment in PD. SPARE-AD, an MRI index capturing AD-like atrophy, and atrophy-based estimates of brain age were computed from longitudinal structural imaging data of 178 PD patients and 84 healthy subjects from the LANDSCAPE cohort. All patients underwent an extensive neuropsychological test battery. Patients diagnosed with mild cognitive impairment or dementia were found to have higher SPARE-AD scores as compared to patients with normal cognition and healthy controls. All patient groups showed increased brain age. SPARE-AD predicted impairment in memory, language and executive functions, whereas advanced brain age was associated with deficits in attention and working memory. Data suggest that SPARE-AD and brain age are differentially related to domain-specific cognitive decline in PD. The underlying pathomechanisms remain to be determined.}, language = {en} }