@inproceedings{SchmeisserMuellerHenkeletal., author = {Schmeißer, Dieter and M{\"u}ller, Sebastian and Henkel, Karsten and M{\"u}ller, Klaus and Wehner, Stefan}, title = {In-situ analysis of moving reaction fronts for the bistable CO oxidation reaction on noble metal catalyst}, series = {Extended Abstracts Book of First International Conference on Materials for Energy}, booktitle = {Extended Abstracts Book of First International Conference on Materials for Energy}, publisher = {Dechema e.V.}, address = {Frankfurt}, isbn = {978-3-89746-117-8}, pages = {S. 932}, abstract = {Experimental data on the reaction kinetics of catalytic processes are prerequisite for modeling of such reactions and their output. We investigate the CO oxidation on some noble metal catalysts, like Iridium(111) and Palladium(111) which is a bistable surface reaction. In a specific range of CO content in the feed gas islands of one or the other adsorbate nucleate and grow, which is recorded with photo electron emission microscopy (PEEM). During these transients the coverage on the surface changes from predominantly oxygen covered to predominantly CO covered resp. vice versa. But the resolution of PEEM and especially its unknown and nonlinear dependence of coverage of the two adsorbates (oxygen and CO) and image intensity make it impossible to extract the changes in coverage. On the other hand the reaction diffusion model based on the Langmuir-Hinshelwood-mechanism delivers the coverage of oxygen and carbon monoxide. The shapeand wall velocity of those islands has been connected perfectly to each other [CPL 423 (2006) 39], but not the absolute coverage and their variation during the reaction. Since the domain wall velocity is small on Iridium(111), this has opened the possibility for a detailed analysis of the changing coverage inside this domain wallutilizing synchrotron radiation and photo electron spectroscopy at BESSY II. The coverage profile of oxygen and CO inside a moving domain wall was measured for both cases using XPS spectra at O1s, C1s and the valence band during thereaction. Comparison with the reaction-diffusion-model and other catalytic surfaces, like Palladium(111) are done.}, language = {en} } @inproceedings{ŁobazaKotSchmeisser, author = {Łobaza, Justyna and Kot, Małgorzata and Schmeißer, Dieter}, title = {Analysis of surface oxidation of TiON ALD films}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 202}, abstract = {Titanium oxynitride (TiON) films are interesting due to their remarkable optical and electronic properties which strongly depend on the O/N ratio. However, it is known that films containing Ti are prone to oxidation in contact with the air [1]. In this work, we study the thickness of a surface oxidation layer which is inherently formed on the atomic layer deposition (ALD) grown TiON/TiN films on Si substrate. We use an Ar+ ion bombardment source and X-ray photoelectron spectroscopy (XPS) for this analysis. We calibrate the sputter rate by using substrate signal intensity decay (here Si 2p) in the XPS spectra of the 5 nm thick TiON sample accordingly. This rate is assumed to be constant when films with a larger thickness are analyzed. We find that the surface oxidation layer is about 1 nm thick, independent on the detailed ALD parameters of the films. The TiN films found underneath are close to the stoichiometric values and have a residual O content below 5\%. Finally, we compare these data to our previous results collected with synchrotron-based radiation source [2,3]. References: [1] Sowinska et al., Applied Physics Letters 100, 233509 (2012). [2] M. Sowinska et al., Applied Surface Science 381, 42-47 (2016). [3] M. Sowińska et al., Journal of Vacuum Science and Tech- nology A, 01A12734 (2016).}, language = {en} } @inproceedings{KotWojciechowskiSnaithetal., author = {Kot, Małgorzata and Wojciechowski, Konrad and Snaith, Henry J. and Schmeißer, Dieter}, title = {Characterization of the perovskite solar cells containing atomic layer deposited Al2O3 buffer layer}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft e.V.}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft e.V.}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 147}, abstract = {Hybrid perovskites have potential to overcome performance limits of the current solar cell technologies and achieve low cost and high versatility. Nonetheless, they are prone to degradation in presence of moisture within a couple of hours or days. In this work, we use the atomic layer deposition (ALD) of Al2O3 on the CH3NH3PbI3 perovskite at room temperature in order to verify if this thin ALD layer may protect the perovskite film against moisture degradation and to check the impact of the Al2O3 on the solar to power conversion efficiency (PCE). Depth profiling X-ray photoelectron spectroscopy study shows that the ALD precursors are chemically active only at the perovskite surface and the film bulk is not affected. The perovskite film coated with Al2O3 layer has enhanced moisture stability. Solar cells with a fresh-made CH3NH3PbI3 perovskite film have shown PCE of 15.4\%, while the one with 50 days aged perovskite only 6.1\%. However, when the aged perovskite is covered with RT-ALD-Al2O3 the PCE value is clearly enhanced.[1] [1] M. Kot et al., Room temperature ALD impact on efficiency, stability and surface properties in perovskite solar cells, ChemSusChem,acctepted.}, language = {en} } @inproceedings{HenkelKotSchmeisser, author = {Henkel, Karsten and Kot, Małgorzata and Schmeißer, Dieter}, title = {Localized defect states and charge trapping in Al₂O₃ films prepared by atomic layer deposition}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 205}, abstract = {The evaluation of the electronic structure and intrinsic defect mechanisms in Al₂O₃ thin films is essential for their effective use in applications with desired functionality such as surface passivation schemes for solar cells [1]. We present a comparative study of different Al₂O₃ films grown by atomic layer deposition (ALD) [2]. The layers were deposited on different substrates using the same aluminum precursor (TMA, trimethylalumium) and employing different process parameters (thermal-ALD, plasma-enhanced-ALD, substrate temperature). These films were characterized by resonant photoelectron spectroscopy and by electrical measurements (capacitance-voltage). For all films investigated intrinsic defect states within the electronic band gap were observed including excitonic, polaronic, and charge-transfer defect states, where their relative abundance is subject of the choice of ALD parameters and of the used substrate. The spectroscopic assigned in-gap defect states are related with electronic charges as determined in the electrical measurements. [1] G. Dingemans and W.M.M. Kessels, J. Vac. Sci. Technol. A 30, 040802 (2012). [2] K. Henkel, M. Kot, D. Schmeißer, J. Vac. Sci. Technol. A 35, (2017), accepted.}, language = {en} } @inproceedings{IsraelRachowSchwiertzetal., author = {Israel, Johannes and Rachow, Fabian and Schwiertz, Carola and Charlafti, Evgenia and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Direct CO2-Methanation of flue gas emitted by conventional power plants}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, pages = {S. 255}, abstract = {The catalytic conversion of CO2 with H2 into CH4 is possible by the Sabatier reaction CO2+4H2→CH4+2H2O. Using excess energy from renewable electricity generation, this approach offers an opportunity for recycling of CO2 as synthetic natural gas. In a new concept, we investigate the performance of the Sabatier reaction as direct methanation of flue gas, emitted by conventional power plants. We investigate the Sabatier process in an upscaled system, with a maximum input flow rate of 45 Nm3/h Gas. The performance is investigated in a simulated composition of flue gas and under real conditions at a lignite power plant in Schwarze Pumpe, Brandenburg, Germany. We can achieve a CO2-conversion of up to 90\%, with approx. 100\% selectivity towards CH4. Under flue gas conditions and at a certain limit of gas flow the system is operated at an autothermal running modus, a steady state equilibrium of exothermic heat production and thermal flow that needs neither external annealing nor cooling.}, language = {en} } @inproceedings{RachowHagendorfMuelleretal., author = {Rachow, Fabian and Hagendorf, Moritz and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Synthesis of Methanol from CO2 for Power-to-Liquid applications}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, pages = {S. 256}, abstract = {The direct synthesis of methanol [CO2+3H2->CH3OH+H2O] represent a possibility to reduce the global CO2-emission by recycling the CO2 and also to store excess energy from renewable energy sources into a common fuel or chemical feedstock (Power-to-Liquid). For an acceptable conversion rate of CO2 a catalyst is needed, together with high temperatures (>200°C) and high pressure (50-200bar). Methanol is normally produced form synthesis gas, a mixture of CO and H2. By directly using CO2 for the exothermic reaction, we avoid the conversion of CO2 to CO by the reversed water gas shift reaction. We also present new concepts for the conversion from CO2-rich flue gases, eliminating the need for a separation of the CO2. The concept is backed up by measurements in laboratory scale. Here we use a Cu-ZnO catalyst on a ZrO2 substrate prepared by impregnation and compare the results with commercially available catalysts. We achieved a conversion of around 7\% and a selectivity of 60\% at a temperature of 240°C and 45bar. The reaction is thermodynamically limited with a maximum conversion rate of 15\% at 250°C and 50bar. The conversion and the selectivity towards methanol is highly influenced by the catalyst used, the temperature, the pressure as well as the flow rate of the reactants.}, language = {en} } @inproceedings{GarainHenkelMandaletal., author = {Garain, Samiran and Henkel, Karsten and Mandal, Dipankar and Schmeißer, Dieter}, title = {One-Pot Synthesis of Copper Oxide Nanowires and PVDF/CuO Composite Films for Piezoelectric Energy Harvesting Application}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Band 53,3}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Band 53,3}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 135}, abstract = {Copper oxide (CuO) is an attractive p-type oxide semiconductor with narrow band gap that has intriguing properties such as non-toxicity, chemical stability, electrocatalytic activity, abundant availability and low production cost. Polymeric materials have attracted great interest owing to their high flexibility, light weight, low cost production and high resistance against corrosion. Poly(vinylidene fluoride) (PVDF) is a commonly used piezoelectric polymer due to its excellent flexibility and piezoelectric properties. In this work, we adopted a one-pot synthesis of CuO nanowires by facile and selective chemical etching process of Cu substrate. XPS, XRD, SEM data ascribed the formation of polycrystalline CuO nanowires over the entire Cu surface. It has been observed that the uniformity, shape and size of the nanowires could be conveniently controlled by etching time and etchant concentration. We have also prepared piezoelectric nanogenerator based on the flexible PVDF/CuO composite film, where the traditional electrical poling treatment was avoided. In addition, dielectric properties have been studied to demonstrate the role of interfacial polarization.}, language = {en} } @inproceedings{KotNaumannGarainetal., author = {Kot, Małgorzata and Naumann, Franziska and Garain, Samiran and Po{\'{z}}arowska, Emilia and Gargouri, Hassan and Henkel, Karsten and Schmeißer, Dieter}, title = {Aluminum nitride films prepared by plasma atomic layer deposition using different plasma sources}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Band 53,3}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Band 53,3}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 170}, abstract = {Aluminum nitride (AlN) thin films are promising for versatile applications in optoelectronics, electronics, piezoelectrics, and acoustics due to their remarkable properties such as wide band gap, high dielectric constant, low electrical conductivity, good piezoelectric coefficient and high ultrasonic velocity. We present a comparative study of AlN films grown by plasma-enhanced atomic layer deposition at 350°C silicon wafers in the SENTECH SI ALD LL system using TMA and NH3 where either a capacitively coupled plasma (CCP) or a direct PTSA (planar triple spiral antenna) source was applied. The films were characterized by ellipsometry, XPS and electrical measurements. The layer properties are discussed concerning the varied ALD process parameters. In general, the process using the direct PTSA source delivered films with higher refractive index and better homogeneity over the wafer achieving also higher growth rates per cycle (GPC) in reduced total cycle durations. Films with refractive index in the range of 2.05 and permittivity around 8 could be realized with a GPC of 1.54 {\AA}/cycle.}, language = {en} } @inproceedings{KotKegelmannKusetal., author = {Kot, Małgorzata and Kegelmann, Lukas and Kus, Peter and Tsud, Nataliya and Matol{\´i}nov{\´a}, Iva and Albrecht, Steve and Matolin, Vladimir and Schmeißer, Dieter}, title = {Room temperature atomic layer deposition for perovskite solar cells}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Band 53,3}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Band 53,3}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 174}, abstract = {After few years of efficiency driven research on perovskite solar cells, the focus now is shifting to understand the underlying processes governing the high efficiency and also to obtain long-term stable devices. Among various deposition methods, atomic layer deposition (ALD) may represent one of the best options, being possible to coat substrates in a very efficient way and at very low temperatures. In our previous work [1] we reported that the efficiency of the solar cell containing aged perovskite film can be enhanced twice while covering the perovskite with a thin ALD alumina film at room temperature. In this work, the chemical, electronic and morphological properties of the fresh perovskite film treated by ALD pulses of the trimethylaluminium and water at room temperature investigated using X-ray Photoelectron Spectroscopy and Field Emission Scanning Electron Microscopy will be discused and correlated with the solar cells performance and stability. [1] M. Kot et al., ChemSusChem 2016, 9, 3401.}, language = {en} }