@misc{StrobelAlvaradoChavarinKnautetal., author = {Strobel, Carsten and Alvarado Chavarin, Carlos and Knaut, Martin and V{\"o}lkel, Sandra and Albert, Matthias and Hiess, Andre and Max, Benjamin and Wenger, Christian and Kirchner, Robert and Mikolajick, Thomas}, title = {High Gain Graphene Based Hot Electron Transistor with Record High Saturated Output Current Density}, series = {Advanced Electronic Materials}, volume = {10}, journal = {Advanced Electronic Materials}, number = {2}, issn = {2199-160X}, doi = {10.1002/aelm.202300624}, abstract = {Hot electron transistors (HETs) represent an exciting frontier in semiconductor technology, holding the promise of high-speed and high-frequency electronics. With the exploration of two-dimensional materials such as graphene and new device architectures, HETs are poised to revolutionize the landscape of modern electronics. This study highlights a novel HET structure with a record output current density of 800 A/cm² and a high current gain α, fabricated using a scalable fabrication approach. The HET structure comprises two-dimensional hexagonal boron nitride (hBN) and graphene layers wet transferred to a germanium substrate. The combination of these materials results in exceptional performance, particularly in terms of the highly saturated output current density. The scalable fabrication scheme used to produce the HET opens up opportunities for large-scale manufacturing. This breakthrough in HET technology holds promise for advanced electronic applications, offering high current capabilities in a practical and manufacturable device.}, language = {en} } @misc{StrobelAlvaradoChavarinLeszczynskietal., author = {Strobel, Carsten and Alvarado Chavarin, Carlos and Leszczynski, Sebastian and Richter, Karola and Knaut, Martin and Reif, Johanna and V{\"o}lkel, Sandra and Albert, Matthias and Wenger, Christian and Bartha, Johann Wolfgang and Mikolajick, Thomas}, title = {Improved Graphene-base Heterojunction Transistor with Different Collector Semi-conductors for High-frequency Applications}, series = {Advanced Materials Letters}, volume = {13}, journal = {Advanced Materials Letters}, number = {1}, issn = {0976-3961}, doi = {10.5185/amlett.2022.011688}, abstract = {A new kind of transistor device with a graphene monolayer embedded between two n-type silicon layers is fabricated and characterized. The device is called graphene-base heterojunction transistor (GBHT). The base-voltage controls the current of the device flowing from the emitter via graphene to the collector. The transit time for electrons passing by the ultrathin graphene layer is extremely short which makes the device very promising for high frequency RF-electronics. The output current of the device is saturated and clearly modulated by the base voltage. Further, the silicon collector of the GBHT is replaced by germanium to improve the device performance. This enabled the collector current to be increased by almost three orders of magnitude. Also, the common-emitter current gain (Ic/Ib) increased from 10-3 to approximately 0.3 for the newly designed device. However, the ON-OFF ratio of the improved germanium based GBHT has so far been rather low. Further optimizations are necessary in order to fully exploit the potential of the graphene-base heterojunction transistor.}, language = {en} } @misc{StrobelAlvaradoChavarinVoelkeletal., author = {Strobel, Carsten and Alvarado Chavarin, Carlos and V{\"o}lkel, Sandra and Jahn, Andreas and Hiess, Andre and Knaut, Martin and Albert, Matthias and Wenger, Christian and Steinke, Olaff and Stephan, Ulf and R{\"o}hlecke, S{\"o}ren and Mikolajick, Thomas}, title = {Enhanced Electrical Properties of Optimized Vertical Graphene-Base Hot Electron Transistors}, series = {ACS Applied Electronic Materials}, volume = {5}, journal = {ACS Applied Electronic Materials}, number = {3}, issn = {2637-6113}, doi = {10.1021/acsaelm.2c01725}, pages = {1670 -- 1675}, abstract = {The arrival of high-mobility two-dimensional materials like graphene leads to the renaissance of former vertical semiconductor-metal-semiconductor (SMS) hot electron transistors. Because of the monolayer thickness of graphene, improved SMS transistors with a semimetallic graphene-base electrode are now feasible for high-frequency applications. In this study we report about a device that consists of amorphous silicon, graphene, and crystalline silicon. For the first time, this device is fabricated by a four-mask lithography process which leads to significant improvements in the device performance. A strongly increased common-emitter current gain of 2\% could be achieved while the on-off ratio improved to 1.6 × 105, which is already higher than predicted theoretically. This could be mainly attributed to better interface characteristics and decreased lateral dimensions of the devices. A cutoff frequency of approximately 26 MHz could be forecasted based on the DC measurements of the device.}, language = {en} }