@inproceedings{WeissGleisingDudzinski, author = {Weiß, Sabine and Gleising, B. and Dudzinski, Wlodzimierz}, title = {Mikrostruktur- und Mikrotextur-Charakterisierung nach der Verformung des hochstickstoffhaltigen Edelstahls (1.4452)}, series = {Fortschritte in der Metallographie, Vortragstexte der 38. Metallographie-Tagung, 29. September - 1. Oktober 2004 in Bochum}, booktitle = {Fortschritte in der Metallographie, Vortragstexte der 38. Metallographie-Tagung, 29. September - 1. Oktober 2004 in Bochum}, publisher = {Werkstoff-Informationsgesellschaft}, address = {Frankfurt}, isbn = {3-88355-336-0}, pages = {103 -- 108}, language = {de} } @inproceedings{WeissKlement, author = {Weiß, Sabine and Klement, U.}, title = {Orientation determination on non planar surfaces}, series = {Proceedings of the CHANNEL Users Meeting 2004 in Ribe, Denmark}, booktitle = {Proceedings of the CHANNEL Users Meeting 2004 in Ribe, Denmark}, publisher = {Chalmers University of Technology}, address = {G{\"o}teborg}, pages = {62 -- 66}, language = {en} } @misc{TikhovskiyGleisingWeissetal., author = {Tikhovskiy, I. and Gleising, B. and Weiß, Sabine and Fischer, Annette}, title = {Mikrostrukturentwicklung des hochstickstofflegierten austenitischen Stahles X13CrMnMoN 18-14-3 unter zyklischer Beanspruchung}, series = {Fortschritte in der Metallographie, Berichte der 11. Internationalen Metallographie-Tagung Leoben, 11. bis 13. September 2002}, journal = {Fortschritte in der Metallographie, Berichte der 11. Internationalen Metallographie-Tagung Leoben, 11. bis 13. September 2002}, publisher = {Werkstoff-Informationsgesellschaft}, address = {Frankfurt}, isbn = {3-88355-313-1}, pages = {43 -- 50}, language = {de} } @misc{TikhovskiyWeissFischer, author = {Tikhovskiy, I. and Weiß, Sabine and Fischer, Annette}, title = {Fatigue Damage Evolution of Cold-Worked Austenitic Nickel-Free High-Nitrogen X13CrMnMoN18 14 3 (1.4452) Steel}, series = {Proceeding of the Fifth International Conference on Low Cycle Fatigue}, journal = {Proceeding of the Fifth International Conference on Low Cycle Fatigue}, publisher = {DVM, Deutscher Verband f{\"u}r Materialforschung und -pr{\"u}fung e.V.}, address = {Berlin}, language = {en} } @misc{WeissMattissenDudzinskietal., author = {Weiß, Sabine and Mattissen, D. and Dudzinski, Wlodzimierz and Fischer, Annette}, title = {Microstructure of the Laser Beam Welded Iron-Based Superalloy A286 after High Temperature Creep}, series = {Conference Proceedings of the Materials Week, Munich 2002}, journal = {Conference Proceedings of the Materials Week, Munich 2002}, publisher = {Werkstoff-Informationsgesellschaft}, address = {Frankfurt}, isbn = {3-88355-314-X}, pages = {S. 142}, language = {en} } @misc{WeissMeissnerFischer, author = {Weiß, Sabine and Meißner, Andreas and Fischer, Alfons}, title = {Microstructural changes within similar coronary stents produced from two different austenitic steels}, series = {Journal of the Mechanical Behavior of Biomedical Materials}, volume = {2}, journal = {Journal of the Mechanical Behavior of Biomedical Materials}, number = {2}, issn = {1751-6161}, pages = {210 -- 216}, language = {en} } @phdthesis{Weiss, author = {Weiß, Sabine}, title = {Einfluss der Wenigkristallinit{\"a}t auf das Verformungsverhalten von Werkstoffen und Bauteilen der Medizintechnik}, publisher = {VDI}, address = {D{\"u}sseldorf}, isbn = {978-3-18-373405-4}, pages = {VI, 172}, language = {de} } @misc{WeissFischer, author = {Weiß, Sabine and Fischer, Annette}, title = {Bruchverhalten hochstickstoffhaltiger St{\"a}hle bei Erm{\"u}dungs¬bean-spruchung}, series = {Tagungsband Gef{\"u}ge und Bruch, 26. - 27. Februar 2007 Bochum}, journal = {Tagungsband Gef{\"u}ge und Bruch, 26. - 27. Februar 2007 Bochum}, address = {Bochum}, language = {de} } @misc{FischerBurgaudAmeretal., author = {Fischer, Annette and Burgaud, D. and Amer, A. E. and Weiß, Sabine}, title = {The fatigue Aspect in metal on metal wear}, series = {Cost 533 biotribology, materials for improved wear resistance of total artificial joints, 29 october 2007, Fundaci{\´o}n Tekniker, Eibar, Spain}, journal = {Cost 533 biotribology, materials for improved wear resistance of total artificial joints, 29 october 2007, Fundaci{\´o}n Tekniker, Eibar, Spain}, publisher = {Tekniker}, address = {Eibar, Guip{\´u}zcoa}, isbn = {978-84-932064-4-4}, pages = {35 -- 44}, language = {en} } @misc{WeissMeissnerFischer, author = {Weiß, Sabine and Meissner, Andreas and Fischer, Annette}, title = {Zyklische Beanspruchung und Mikrostruktur von koronaren Stents}, series = {Fortschritte der Kennwertermittlung f{\"u}r Forschung und Praxis, Tagung Werkstoffpr{\"u}fung 2006, 07. und 08. Dezember 2006, Bad Neuenahr}, journal = {Fortschritte der Kennwertermittlung f{\"u}r Forschung und Praxis, Tagung Werkstoffpr{\"u}fung 2006, 07. und 08. Dezember 2006, Bad Neuenahr}, editor = {Borsutzki, Michael}, publisher = {Stahleisen}, address = {D{\"u}sseldorf}, isbn = {3-514-00734-9}, pages = {S. 463}, language = {de} } @misc{FischerMeissnerBraueretal., author = {Fischer, Annette and Meissner, Andreas and Brauer, H. and Weiß, Sabine}, title = {Stent fatigue testing according to in vivo strain cycles}, series = {Journal of Biomechanics}, volume = {39}, journal = {Journal of Biomechanics}, number = {Suppl. 1}, issn = {1873-2380}, pages = {S. 591}, language = {en} } @misc{FischerTikhovskiyBuescheretal., author = {Fischer, Annette and Tikhovskiy, I. and B{\"u}scher, R. and Weiß, Sabine}, title = {Mechanische und tribologische Eigenschaften hochstickstoffhaltigen Austeniten}, series = {Materialwissenschaft und Werkstofftechnik}, volume = {39}, journal = {Materialwissenschaft und Werkstofftechnik}, number = {9}, isbn = {1521-4052}, pages = {747 -- 754}, language = {de} } @misc{WeissMeissner, author = {Weiß, Sabine and Meissner, Andreas}, title = {Erm{\"u}dung und Mikrostruktur von koronaren Stents}, series = {Materialwissenschaft und Werkstofftechnik}, volume = {37}, journal = {Materialwissenschaft und Werkstofftechnik}, number = {9}, issn = {1521-4052}, pages = {755 -- 761}, language = {de} } @misc{FischerWeissWimmer, author = {Fischer, Alfons and Weiß, Sabine and Wimmer, Markus A.}, title = {The Tribological Difference between Biomedical Steels and CoCrMo-Alloys}, series = {Journal of the Mechanical Behavior of Biomedical Materials}, volume = {9}, journal = {Journal of the Mechanical Behavior of Biomedical Materials}, issn = {1878-0180}, pages = {50 -- 62}, language = {en} } @misc{RanjbarnodehWeissHankeetal., author = {Ranjbarnodeh, Eslam and Weiß, Sabine and Hanke, Stefanie and Fischer, Annette}, title = {EBSD characterization of the effect of welding parameters on HAZ of AISI409}, series = {Journal of Mining and Metallurgy : B}, volume = {48}, journal = {Journal of Mining and Metallurgy : B}, number = {1}, issn = {1450-5339}, pages = {115 -- 121}, language = {en} } @misc{WeissSchnauberFischer, author = {Weiß, Sabine and Schnauber, T. and Fischer, Annette}, title = {Microstructure Characterization of thin structures after deformation}, series = {Materials and devices for smart systems III, symposium held December 1 - 4, 2008, Boston, Massachusetts}, journal = {Materials and devices for smart systems III, symposium held December 1 - 4, 2008, Boston, Massachusetts}, editor = {Su, Ji}, publisher = {MRS}, address = {Warrendale, Pa.}, isbn = {978-1-605-11101-8}, pages = {V11 -- 19}, language = {en} } @misc{AmerWeissFischer, author = {Amer, A. E. and Weiß, Sabine and Fischer, Annette}, title = {Improvement of fatigue resistance of low-nickel stainless steels for biomedical applications compared to CoCr-alloys}, series = {Steel grips}, volume = {7}, journal = {Steel grips}, number = {6}, issn = {1866-8453}, pages = {457 -- 461}, language = {en} } @misc{WeissSzymczakMeissner, author = {Weiß, Sabine and Szymczak, H. and Meissner, Andreas}, title = {Fatigue and endurance of coronary stents}, series = {Materialwissenschaft und Werkstofftechnik}, volume = {40}, journal = {Materialwissenschaft und Werkstofftechnik}, number = {1-2}, issn = {1521-4052}, pages = {61 -- 64}, language = {en} } @misc{GarkasWeissWang, author = {Garkas, Wagdi and Weiß, Sabine and Wang, Q. M.}, title = {(Cr1-x Al x)N as a candidate for corrosion protection in high temperature segments of CCS plants}, series = {Environmental Earth Sciences}, journal = {Environmental Earth Sciences}, issn = {1866-6280}, doi = {10.1007/s12665-013-2646-y}, abstract = {Three (Cr1-x Al x )N (x = 0.33, 0.5, 0.66) coatings were deposited on Ni-super alloy IN718 using reactive magnetron sputtering. The oxidation behavior of all coatings at 900 °C up to 500 h in air was studied. Furthermore, the corrosion behavior of the (Cr0.33,Al0.66)N coating at 900 °C (corrosion type I) by spraying a uniform salt scale of Na2SO4 on the sample surface (1 mg/cm2) was investigated. It was found that the coated samples indicate significantly higher oxidation and corrosion resistance compared to uncoated Ni super alloy. This is mainly due to the formation of protective Cr2O3 and Al2O3 layers on the coating surface. With the increase of Al content, the coatings exhibited improved oxidation resistance. The formation of thin and adherent Al2O3 scale on the surface of Al rich coating is the reason for its better oxidation behavior. The detailed structures of the oxide scales and the interdiffusion between coating and substrate were studied using energy dispersive X-ray spectroscopy-analysis.}, language = {en} } @inproceedings{WeissMeissner, author = {Weiß, Sabine and Meissner, Andreas}, title = {Austenitic high nitrogen steel: An alternative material for coronary stents?}, series = {8th World Biomaterials Congress 2008, Amsterdam, 28 May - 1 June 2008}, booktitle = {8th World Biomaterials Congress 2008, Amsterdam, 28 May - 1 June 2008}, publisher = {Curran Associates Inc.}, address = {Red Hook, NY}, isbn = {978-1-61567-080-2}, language = {en} } @misc{FischerBurgaudAmeretal., author = {Fischer, Annette and Burgaud, D. and Amer, A. E. and Weiß, Sabine}, title = {Fatigue aspects of the generation of nanoparticles during wear of biomedical alloys}, series = {8th World Biomaterials Congress 2008, Amsterdam, 28 May - 1 June 2008}, journal = {8th World Biomaterials Congress 2008, Amsterdam, 28 May - 1 June 2008}, publisher = {Curran Associates Inc.}, address = {Red Hook, NY}, isbn = {978-1-61567-080-2}, language = {en} } @misc{KazakWeiss, author = {Kazak, Fedor and Weiß, Sabine}, title = {Analysis of the Frequency as an Integral Method for the Testing of Anisotropic 3D Sheet Metal Structure}, series = {Materials Testing}, volume = {56}, journal = {Materials Testing}, number = {9}, issn = {0025-5300}, pages = {656 -- 661}, language = {en} } @misc{RanjbarnodehWeissHankeetal., author = {Ranjbarnodeh, Eslam and Weiß, Sabine and Hanke, Stefanie and Fischer, Alfons}, title = {EBSD characterization of the effect of welding parameters on HAZ of AlSl409}, series = {Journal of Mining and Metallurgy : B, Metallurgy}, volume = {48}, journal = {Journal of Mining and Metallurgy : B, Metallurgy}, number = {1}, pages = {115 -- 121}, language = {en} } @misc{RanjbarnodehHankeWeissetal., author = {Ranjbarnodeh, Eslam and Hanke, Stefanie and Weiß, Sabine and Fischer, Alfons}, title = {Effect of welding parameters on the heataffected zone of AlSI409 ferritic stainless steel}, series = {International Journal of Minerals, Metallurgy and Materials}, volume = {19}, journal = {International Journal of Minerals, Metallurgy and Materials}, number = {10}, issn = {1869-103X}, pages = {923 -- 929}, language = {en} }