@misc{GhoshSinhaXieetal., author = {Ghosh, Sujoy Kumar and Sinha, Tridib Kumar and Xie, Mengying and Bowen, Christopher Rhys and Garain, Samiran and Mahanty, Biswajit and Roy, Krittish and Henkel, Karsten and Schmeißer, Dieter and Kim, Jin Kuk and Mandal, Dipankar}, title = {Temperature-Pressure Hybrid Sensing All-Organic Stretchable Energy Harvester}, series = {ACS Applied Electronic Materials}, volume = {3}, journal = {ACS Applied Electronic Materials}, number = {1}, issn = {2637-6113}, doi = {10.1021/acsaelm.0c00816}, pages = {248 -- 259}, abstract = {The design and development of intrinsically stretchable all-organic self-powered sensors concurrently perceiving temperature and pressure remain a challenge but deliver an exciting platform to realize environmentally friendly wearable electronics. In this approach, a biomimetic all-organic stretchable energy harvester is designed by a xylitol-added poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS/Xyl) film as a compatible overlay electrode with polyaniline-reinforced one-dimensional aligned poly(vinylidene fluoride) hybrid electroactive soft nanowires. The gradient of elastic modulus between the electrode and the active nanowire component enables the all-organic device to manifest excellent power-generating performance under external temperature fluctuation (∼3 μW/m2 under ΔT ∼ 92 K) and mechanical force (∼31 μW/cm2 at 30 N). Importantly, the device renders simultaneous energy scavenging of temperature and pressure changes under pressing and stretching conditions (∼20\%). The excellent mechanosensitivity (∼100 mV/N), fast response time (∼1 ms), outstanding mechanical and thermal stability, and good temperature resolution <10 K enable the harvester to act as an epidermal sensor, which simultaneously detects and discriminates both subtle pressure and thermal deviations exposed to an epidermis surface. The real-time recording and wireless transferring of physiological signals to a smartphone indicate an effective way to realize remote healthcare monitoring for early intervention.}, language = {en} } @misc{RoyGhoshSultanaetal., author = {Roy, Krittish and Ghosh, Sujoy Kumar and Sultana, Ayesha and Garain, Samiran and Xie, Mengying and Bowen, Christopher Rhys and Henkel, Karsten and Schmeißer, Dieter and Mandal, Dipankar}, title = {A Self-Powered Wearable Pressure Sensor and Pyroelectric Breathing Sensor Based on GO Interfaced PVDF Nanofibers}, series = {ACS Applied Nano Materials}, volume = {2}, journal = {ACS Applied Nano Materials}, number = {4}, issn = {2574-0970}, doi = {10.1021/acsanm.9b00033}, pages = {2013 -- 2025}, abstract = {This paper reports a self-powered,flexible, piezo- and pyro-electric hybrid nanogenerator (NG) device that can be fixed on different locations of human skin for detecting static and dynamic pressure variations and can also monitor temperature fluctuations during the respiration process. An efficient and cost-effective fabrication strategy has been developed to create electrospun poly(vinylidene fluoride) (PVDF)/graphene oxide (GO) nanofibers, which are used to create a highly sensitive wearable pressure sensor and pyroelectric breathing sensor. The sensor can accurately and rapidly detect pressures as low as 10 Pa with a high sensitivity (4.3 V/kPa), a key performance indicator for wearable sensors. Importantly, the sensor exhibits a high sensitivity to bending and stretching by finger, wrist, and elbow. The pressure sensor is also highly sensitive to vocal vibrations when attached to the human throat. The device can generate a maximum output power density of∼6.2 mW/m2 when subjected to a compressive stress, which enhances its range of applications. Moreover, it is demonstrated that doping with GO improves the pyroelectric energy harvesting and sensing performance of the device under repeated temperature fluctuations. The PVDF/GO-based nanogenerator has a maximum pyroelectric output power density of∼1.2 nW/m2 and can sense temperature changes during respiration, which makes it promising as a pyroelectric breathing sensor. It is demonstrated that processing of the PVDF-GO self-powered multifunctional pressure and pyroelectric breathing sensor can be up-scaled for fabricating compact and high-performance electronic skins for application in health monitoring, motion detection, and portable electronics.}, language = {en} }