@inproceedings{HoffmannbeckRichterStaedteretal., author = {Hoffmannbeck, David and Richter, Matthias and St{\"a}dter, Matthias and Paloumpa, Ioanna and Henkel, Karsten and Schmeißer, Dieter}, title = {Spectroscopic and microscopic characterization of potential catalysts for the hydrogenation of CO2}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 483}, abstract = {The reduction of CO2 emissions is a general demand of the society in order to avoid irreversible climate changes. We are investigating potential catalysts for the hydrogenation of CO2 in particular for its application in the so called oxyfuel combustion process. In order to understand the catalytic behavior of the investigated materials we use the techniques X-Ray Photoemission (XPS) and -absorption (XAS) Spectroscopy as well as X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The prospective of our work is to figure out the electronic and structural properties of the material and to optimize proper catalysts or design new ones for best catalytic activity. Beside the spectro-microscopic investigations the catalysts are tested under Sabatier reaction conditions in terms of activity, stability and sensitivity against poisoning. In our preliminary work we constructed a Sabatier reactor system with analytical parts based on infrared absorption and mass spectroscopy modules. First spectroscopic and catalytic results achieved on a commercially available Ru/Al2O3 catalyst will be presented.}, language = {en} } @inproceedings{RichterStaedterPaloumpaetal., author = {Richter, Matthias and St{\"a}dter, Matthias and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Multiple Auger Decay at resonant photo-excitation in carbon thin films}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {We use resonant photoemission at the C1s edge to study the electronic structure of HOPG, graphene flakes and monolayer graphene. We find remarkable differences in the profile of the Auger decay channels, which we attribute to an additional multiple-Auger with a three-hole final state. A prerequisite for the appearance of this decay mechanism is the existence of localized excitonic states, which cause the appearance of the multiple Auger decay. Defects (pits, holes, steps and kinks) can act as localized excitonic states. We use those effects to identify the existence and the quantity of such defect states within the pi*-band regime in carbon thin films, because the intensity of the three-hole Auger decay is varying with the defect density of the carbon films. The defect-excitonic states can be either localized in the band-gap at the M-point or in case of surface defects like steps, kinks or pits even at the K-point by losing the pure sp2 character of the films. We find that the appearance of the multiple Auger decay is different for multilayer and monolayer graphene. In particular the interaction of impurities leads to broadening of the C1s core levels. The three-hole Auger decay spectroscopy is a new method to detect such contaminations with a high sensitivity.}, language = {en} } @misc{MuellerRichterFriedrichetal., author = {M{\"u}ller, Klaus and Richter, Matthias and Friedrich, Daniel and Paloumpa, Ioanna and Kramm, Ulrike Ingrid and Schmeißer, Dieter}, title = {Spectroscopic characterization of Cobalt-Phthalocyanine electrocatalysts for fuel cell applications}, series = {Solid State Ionics}, journal = {Solid State Ionics}, number = {216}, issn = {1872-7689}, doi = {10.1016/j.ssi.2011.12.013}, pages = {78 -- 82}, abstract = {For polymer-electrolyte-membrane fuel cells (PEM-FC), platinumcatalysts on carbon based substrates are state of the art, due to high electrochemical activity and chemical stability in acid electrolytes. High costs of platinum force investigations of alternative catalysts. With respect to the oxygen reduction reaction, possible candidates are transition metal (TM) complexes like TM-porphyrines or TM-phthalocyanines. Pyrolysis on carbon based substrates improves the catalytic activity. Highest activities were found for Fe or Co as transition metal centers. We present results of the pyrolysis of Co-phthalocyanine (CoPc) on carbon black. Besides an investigation of morphology by scanning electron microscopy (SEM) and chemical composition by energy dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) during pyrolysis, we present a near edge X-ray absorption fine structure (NEXAFS) study of the chemical composition for the related annealing steps. This investigation is accompanied by an electrochemical characterization of the catalytic activity and selectivity. The XPS and NEXAFS data indicate a decomposition of the CoN4(chelate-) complex during pyrolysis. The N1s data for 800 °C show graphite-like, formally pyrrolic and pyridinic like features, without any significant contri-bution of Co. The Co2p data for both, XPS and NEXAFS are dominated by CoO/Co2O3. It can be concluded that during the pyrolysis cobalt particles are formed by the disintegration of CoN4-centers, after pyrolysis these par-ticles become oxidized upon contact with air.}, language = {en} } @misc{RichterPaloumpaFriedrichetal., author = {Richter, Matthias and Paloumpa, Ioanna and Friedrich, Daniel and Schmeißer, Dieter}, title = {Multiple Auger Decay At Resonant Photo-Excitation In Carbon Thin Films}, series = {ECS Transactions}, volume = {50}, journal = {ECS Transactions}, number = {20}, doi = {10.1149/05020.0009ecst}, pages = {9 -- 21}, abstract = {We use resonant photoemission at the C1s edge to study the electronic structure of HOPG, graphene flakes and monolayer graphene. We find remarkable differences in the profile of the Auger decay channels, which we attribute to an additional multiple-Auger with a three-hole final state. A prerequisite for the appearance of this decay mechanism is the existence of localized excitonic states, which cause the appearance of the multiple Auger decay. We use those effects to identify the existence and the quantity of such defect states within the π*-band regime in carbon thin films, because the intensity of the three-hole Auger decay is varying with the defect density of the carbon films. We find that the appearance of the multiple Auger decay is different for multilayer and monolayer graphene. In particular the interaction of impurities leads to broadening of the C1s core levels. The three-hole Auger decay spectroscopy is a new method to detect such contaminations with a high sensitivity.}, language = {en} } @inproceedings{KachelRichterPhilipetal., author = {Kachel, Krzysztof and Richter, Matthias and Philip, Shine and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Performance of organic solar cells with a ferroelectric component}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 153}, abstract = {Charge dissociation and recombination are important factors for the efficiency of organic solar cells, even in blended systems of different polymers. As a new approach, the influence of additional blended ferroelectric nanoparticles on the solar cell performance is investigated. The ferroelectric dipole of the nanoparticle causes a local field, which could lead to a longer recombination time of the polaron pairs. As solar cell system we use bulk heterojunction cells or bilayer structures based on regioregular poly(3-hexylthiophene) (P3HT) as the donor and phenyl-C61-butyric acid methyl ester (PCBM) as the acceptor molecule. As ferroelectric additive we use the ferroelectric copolymer poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) or BaTiO3. The copolymer is spincoated as ultrathin film of 20nm, whereas the BaTiO3 is incorporated as nanodispersion into the donor-acceptor blend. We present the solar cell parameters for the different geometries and ferroelectric materials as a function of ferroelectric content and of the alignment of the ferroelectric dipoles after application of an external electric field.}, language = {en} } @inproceedings{PhilipRichterFriedrichetal., author = {Philip, Shine and Richter, Matthias and Friedrich, Daniel and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Spectroscopic investigations of P3HT/PCBM films for organic BHJ solar cells}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 153}, abstract = {Investigations of the electronic structure and composition of regioregular poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) based films using Near Edge X-Ray Absorption Fine Structure (NEXAFS) are presented. The measurements were performed at the U49/2-PGM2 beam line of BESSY II, Berlin recording TEY (total electron yield) and TFY (total fluorescence yield) data. Samples prepared by spin coating a mixture of P3HT dissolved in chloroform and PCBM dissolved in chlorobenzene onto ITO (indium tin oxide) coated glass slides were analyzed. Upon measuring the pure P3HT and PCBM, all reported excitations were observed, whereas the blended system is a weighted superposition of the related peaks. Analyzing the data we calculate the composition of the mixture. We also show angular dependent NEXAFS measurements of the P3HT/PCBM blend in order to measure the orientation and distribution of the P3HT polymer. Additionally, we show a new approach for organic solar cell application. BaTiO3 nanoparticles were incorporated as nanodispersion into the donor-acceptor blend or the ferroelectric copolymer poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) was spincoated as an ultrathin film below the blend.}, language = {en} } @inproceedings{RichterFriedrichPhilipetal., author = {Richter, Matthias and Friedrich, Daniel and Philip, Shine and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Study of P3HT/PCBM based films by NEXAFS}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 194}, abstract = {In this contribution we report on investigations of the electronic structure and composition of regioregular poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) based films by using Near Edge X-Ray Absorption Fine Structure (NEXAFS). The measurements were done at the U49/2-PGM2 beam line of BESSY II, Berlin using TEY (total electron yield) and TFY (total fluorescence yield) detection. The samples were produced by spin casting a mixture of P3HT (dissolved in chloroform) and PCBM (dissolved in chlorobenzene) on ITO (indium tin oxide) coated glass slides. Measurements of pure P3HT and PCBM show all typical excitations, whereas the blended system is a weighted superposition of the related peaks. Analyzing these weighted superposition, we observe in the surface sensitive TEY data an accumulation of P3HT, whereas in the bulk sensitive TFY signal an as expected mixture is found. We also show angular dependent NEXAFS measurements of the P3HT/PCBM blend in order to measure the orientation and distribution of the P3HT polymer. Additionally, we will show a new approach for organic solar cell application by introducing ferroelectric nanoparticles into the mixture.}, language = {en} } @inproceedings{RichterMuellerPhilipetal., author = {Richter, Matthias and M{\"u}ller, Klaus and Philip, Shine and Paloumpa, Ioanna and Henkel, Karsten and Schmeißer, Dieter}, title = {Temperature dependence of organic solar cell parameters}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 671}, abstract = {The influence of an annealing step on the parameters of bulk heterojunction organic solar cells is investigated. In order to fabricate the solar cells we use glass coated with ITO (Indiumtinoxide) as a substrate on which the active layer consisting of P3HT and PCBM is spincoated. Al-electrodes are evaporated on top of the active layer. We use PEDOT:PSS as buffer layer. Each sample is annealed at different temperatures for a short time. Between every temperature step the I-V characteristic of the cell is measured. The following parameters are derived afterwards: FF, Isc (density), Voc. Also the efficiency is estimated. The results show a maximum cell efficiency for drying at 100°C for 20sec. A further important step for preparation is the drying procedure of the PEDOT:PSS layer. Here an improvement of about 50\% in cell efficiency is measured after drying at 50°C for 5 days under inert gas atmosphere.}, language = {en} } @inproceedings{MbuaMuellerRichteretal., author = {Mbua, Roy and M{\"u}ller, Klaus and Richter, Matthias and Henkel, Karsten and Paloumpa, Ioanna and Schmeißer, Dieter and Kramm, Ulricke}, title = {Investigation of new Catalysts for PEM Fuel Cells}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 483}, abstract = {Increasing green house emissions amplify global warming concerns worldwide. Fuel cells, based on polymer electrolyte membranes (PEM) are part of the solution to this issue. We aim at developing and testing new catalysts for fuel cells. Platinum catalysts perform best in PEM fuel cells to date but they are very expensive. For fuel cells to be perfectly applicable and economically affordable, an alternative catalyst with similar or even greater efficiency should be developed. Metal phthalocyanines are known to be good oxygen reduction catalysts and are associated with high electron transfer properties. We investigated Cobalt Phthalocyanine in its pure state mixed with Carbon Black (CoPc:Carbon Black=1:9) untreated and also after a treatment in N2 at several temperatures, up to 1000°C for 30 minutes. Results of XPS and EDX analyses reveal that the treatment at higher temperatures causes a rearrangement in the chemical states of Co, N and C atoms. Furthermore, results of cycling voltammetry (CV) analysis reveal that CoPc treated in N2 at 800°C exhibited a higher current density, in conclusion, a higher catalytic activity than the untreated CoPc.}, language = {en} }