@misc{SasseSchleussOssenbrinketal., author = {Sasse, Ina and Schleuß, Leander and Ossenbrink, Ralf and Michailov, Vesselin}, title = {Joining of structured sheet metals - Remote laser beam welding in comparison with resistance spot welding}, series = {Welding and Cutting}, volume = {13}, journal = {Welding and Cutting}, number = {1}, pages = {43 -- 47}, abstract = {One main problem of thin-walled, large-area sheet components for lightweight construction solutions is the inadequate stiffness. One approach for a solution is provided by structured sheet metals which have an increased flexural stiffness due to three-dimensionally incorporated structures. The areas of application of the structured sheet metals (e.g. in subassemblies in automobile, rail vehicle and tank construction) necessitate adapted welding technologies. Since few systematic investigations have been conducted on structured sheet metals in the field of joining technology until now, there is a lack of knowledge about the further processing of these sheets by means of welding technology. The aims of the presented investigations are to make it possible to utilise these modern semi-finished products industrially using remote laser beam welding and to compare this with resistance spot welding. Both are important joining processes in the areas of applications interesting for structured sheet metals and thus constitute key technologies for industrial utilisation. Resistance spot welding has already been qualified for utilisation on structured sheet metals [1]. In addition, investigations were conducted into the remote laser beam welding of structured and flat sheets. These investigations encompass the possibilities of joining structured and flat joining members by means of remote laser beam welding as well as the assessment of the joint strength in tensile shear and peel tests. Thereafter, the results of the investigations are compared with the resistance spot welding of structured sheet metals and specific application recommendations are derived.}, language = {en} } @inproceedings{SasseSchleussOssenbrinketal., author = {Sasse, Ina and Schleuß, Leander and Ossenbrink, Ralf and Michailov, Vesselin}, title = {F{\"u}gen strukturierter Bleche - Remote-Laserstrahlschweißen im Vergleich zum Widerstandspunktschweißen}, series = {DVS Congress 2013, Große Schweißtechnische Tagung, DVS-Studentenkongress}, booktitle = {DVS Congress 2013, Große Schweißtechnische Tagung, DVS-Studentenkongress}, publisher = {DVS-Verlag}, address = {D{\"u}sseldorf}, isbn = {978-3-87155-614-2}, pages = {98 -- 103}, language = {de} } @misc{DreibatiOssenbrinkMichailov, author = {Dreibati, Ossama and Ossenbrink, Ralf and Michailov, Vesselin}, title = {Quantification of cold cracking parameters of high strength steels by physical simulation under welding conditions}, series = {Quarterly journal of the Japan Welding Society}, volume = {31}, journal = {Quarterly journal of the Japan Welding Society}, number = {4}, issn = {0288-4771}, doi = {10.2207/qjjws.31.148s}, pages = {148 -- 152}, abstract = {Cold cracks in welds are the result of the formation of brittle microstructure as martensite in the presence of diffusible hydrogen as well as of tensile stresses. Cold cracks occur when the combination of cold crack influence parameters (CCIP) overcomes a critical limit. In this study, critical combinations of CCIP were identified with an enhanced test procedure under welding conditions. The test is based on the physical simulation technique of heat affected zone (HAZ) and it is carried out using the test and simulation center Gleeble 3500. Thereby, laboratory special specimens are charged with hydrogen from pure hydrogen atmosphere in the initial stage of the test. Rigidly restraint specimen section is subjected to different weld temperature cycles. Through the thermal exposure, the desired microstructure of HAZ is set in the test zone of the restraint specimen section. A plastic deformation takes place owing to the prevented expansion during heating and contraction of the specimen during cooling. Consequently, compressive or tensile reactions stresses arise in the deformed zone. Cracked specimen represents a critical combination of the CCIP. The quantitative cold crack criterion separates the cold crack susceptible combinations from those non susceptible.}, language = {en} } @misc{MichailovDreibatiOssenbrinketal., author = {Michailov, Vesselin and Dreibati, Ossama and Ossenbrink, Ralf and Schweizer, Frank}, title = {Rechnergest{\"u}tzte Vorhersage der Kaltrissneigung laserstrahlgeschweißter Bauteile aus hochfesten St{\"a}hlen - Teil 1}, series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, volume = {65}, journal = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, number = {11}, issn = {0036-7184}, pages = {776 -- 781}, language = {de} } @inproceedings{SchleussSpringerZoekeetal., author = {Schleuß, Leander and Springer, Katrin and Zoeke, J{\"o}rg and Ossenbrink, Ralf and Michailov, Vesselin}, title = {Qualifizierung von w{\"a}rmearmen MSG-Schweißverfahren f{\"u}r Leichtbaukonstruktionen mit strukturierten Halbzeugen}, series = {Internationaler Fachkongress der Schweiß- und Verbindungstechnik Join-Ex 2012 Wien, 10. + 11. Oktober 2012, Congress Center der Messe Wien}, booktitle = {Internationaler Fachkongress der Schweiß- und Verbindungstechnik Join-Ex 2012 Wien, 10. + 11. Oktober 2012, Congress Center der Messe Wien}, publisher = {Schweißtechnische Zentralanstalt e.V.}, address = {Wien}, pages = {75 -- 83}, language = {de} } @misc{KazakSchleussOssenbrinketal., author = {Kazak, Fedor and Schleuß, Leander and Ossenbrink, Ralf and Michailov, Vesselin and Weiß, Sabine}, title = {Particularities of testing structured sheet metals in 3-point bending tests}, series = {Materials Testing}, volume = {58}, journal = {Materials Testing}, number = {6}, issn = {0025-5300}, doi = {10.3139/120.110883}, pages = {495 -- 500}, abstract = {Thin sheet metals from deep drawing steel DC04 are very often used in the production of car body and case parts. Quality improvement of sheet metal components by new constructive solutions (structuring) as well as adapted joining technology is going on. Structured sheet metals differ from each other by their high bending stiffness. At the same time, they show certain anisotropy due to the structure. Therefore a typical testing method of structured semi-finished parts (single sheet metals, sandwiches)is the bending test. The literature review revealed that in many studies no special demands on tests of structured materials were made. This concerns particularly the structure arrangement, structure direction and structure location of the specimen relative to the mandrel position during bending tests, i. e., the direction of the fixed load relative to the structure. The aim of this study was to determine the influence of the test specification on flexural behavior. In the present paper, honeycomb-structured sheet metals were examined using 3-point bending tests. Bending stiffness and lightweight potential were calculated with respect to the location of load application and compared for different structure arrangements,directions and locations. The influence of the anisotropy on flexural behavior of the honeycomb-patterned sheet metals was moderate.}, language = {en} } @misc{ZhangDoynovOssenbrinketal., author = {Zhang, Wei and Doynov, Nikolay and Ossenbrink, Ralf and Michailov, Vesselin}, title = {Physical and FE-Simulation of Thermal Shock Behaviour of Refractory Ceramics}, series = {refractories WORLDFORUM}, volume = {8}, journal = {refractories WORLDFORUM}, number = {2}, issn = {1868-2405}, pages = {110 -- 117}, language = {en} } @inproceedings{ZhangPrieferOleninaetal., author = {Zhang, Wei and Priefer, Marian and Olenina, Mariia and Ossenbrink, Ralf and Michailov, Vesselin}, title = {Additive manufacturing by laser beam build-up welding}, series = {6th International Conference on Additive Technologies - iCAT 2016, N{\"u}rnberg, Germany, 29. - 30. November 2016}, booktitle = {6th International Conference on Additive Technologies - iCAT 2016, N{\"u}rnberg, Germany, 29. - 30. November 2016}, isbn = {978-961-285-537-6}, pages = {324 -- 327}, language = {en} } @inproceedings{ZhangDoynovOssenbrinketal., author = {Zhang, Wei and Doynov, Nikolay and Ossenbrink, Ralf and Michailov, Vesselin and Scheithauer, Uwe and Michaelis, Alexander}, title = {Investigation of thermal shock behaviour of refractory ceramics based on the calcium-aluminate}, series = {14th Biennial Worldwide Congress Unified International Technical Conference on Refractories (UNITECR) 2015, Vienna, Austria, September 15-18, 2015}, booktitle = {14th Biennial Worldwide Congress Unified International Technical Conference on Refractories (UNITECR) 2015, Vienna, Austria, September 15-18, 2015}, address = {Hannover}, isbn = {978-3-9815813-1-7}, language = {en} } @misc{AtangaZhangDreibatietal., author = {Atanga, Valetine Kubong and Zhang, Wei and Dreibati, Ossama and Doynov, Nikolay and Ossenbrink, Ralf and Michailov, Vesselin and Scheffler, Michael}, title = {Alumina-mullite Materials for Refractory Applications: Microstructure, Physical and Finite Element Simulation of Thermal Shock Behaviour}, series = {refractories WORLDFORUM}, volume = {4}, journal = {refractories WORLDFORUM}, number = {1}, issn = {1868-2405}, pages = {159 -- 164}, language = {en} } @misc{GenchevDoynovOssenbrinketal., author = {Genchev, Gancho Vladimirov and Doynov, Nikolay and Ossenbrink, Ralf and Michailov, Vesselin}, title = {Modelling the Local Microstructure Properties due to Multi-Pass Welding}, series = {Materials Science Forum}, volume = {Vol. 879}, journal = {Materials Science Forum}, issn = {0255-5476}, doi = {10.4028/www.scientific.net/MSF.879.595}, pages = {595 -- 600}, language = {en} } @inproceedings{SeidlitzFritzscheSchleussetal., author = {Seidlitz, Holger and Fritzsche, Sebastian and Schleuß, Leander and Ossenbrink, Ralf and Michailov, Vesselin}, title = {Neuartige F{\"u}getechnologie zum Herstellen von hochbelastbaren Multi-Material-Bauweisen aus textilverst{\"a}rkten Kunststoffen und Metallen bei einseitiger Zug{\"a}nglichkeit der F{\"u}gestelle}, series = {DVS Congress 2016, Große Schweißtechnische Tagung, Vortr{\"a}ge der Veranstaltungen in Leipzig am 19. und 20. September 2016}, booktitle = {DVS Congress 2016, Große Schweißtechnische Tagung, Vortr{\"a}ge der Veranstaltungen in Leipzig am 19. und 20. September 2016}, publisher = {DVS-Verlag}, address = {D{\"u}sseldorf}, isbn = {978-3-945023-74-7}, pages = {424 -- 428}, language = {de} } @inproceedings{GenchevDoynovOssenbrinketal., author = {Genchev, Gancho Vladimirov and Doynov, Nikolay and Ossenbrink, Ralf and Michailov, Vesselin}, title = {Schweißtechnische Simulation der lokalen Eigenschaften in der W{\"a}rmeeinflusszone von Mehrlagenschweißungen}, series = {ANSYS Conference \& 33rd CADFEM Users' Meeting, 24. - 26. Juni, Bremen, conference proceedings}, booktitle = {ANSYS Conference \& 33rd CADFEM Users' Meeting, 24. - 26. Juni, Bremen, conference proceedings}, publisher = {CADFEM GmbH}, address = {Grafing}, language = {de} }