@inproceedings{GlaweSchulzGonzalezJuezetal., author = {Glawe, Christoph and Schulz, Falko T. and Gonzalez-Juez, Esteban D. and Schmidt, Heiko and Kerstein, Alan R.}, title = {ODTLES Simulations of Turbulent Flows through Heated Channels and Ducts}, series = {8th International Symposium on turbulence and shear flow phenomena (TSFP8), 28-30 August 2013, Poitiers, France, vol. 2}, booktitle = {8th International Symposium on turbulence and shear flow phenomena (TSFP8), 28-30 August 2013, Poitiers, France, vol. 2}, pages = {1 -- 6}, abstract = {A widely occurring problem in fluid dynamics either in engineering or e.g. hydrology is the turbulent transport through channels and ducts. ODTLES, a stochastic based multi-scale and multi-dimensional model, is a promising tool to describe these flows even including scalar proper- ties like temperature. We are quantifying the ability of ODTLES to describe the heated channel flow with respect to the Prandtl number and the flow through squared ducts with respect to the Reynolds number.}, language = {en} } @inproceedings{GlaweSchmidtKerstein, author = {Glawe, Christoph and Schmidt, Heiko and Kerstein, Alan R.}, title = {ODTLES: A Multi-scale Ansatz for highly turbulent flows}, series = {15 The European turbulence conference, 25-28 august, 2015, Delft, The Netherland}, booktitle = {15 The European turbulence conference, 25-28 august, 2015, Delft, The Netherland}, pages = {2}, abstract = {We use ODTLES, a multi-dimensional extension of the One-Dimensional-Turbulence model (ODT). ODT describes turbulent advection on a 1D sub-domain using a stochastic process for turbulent advection. These 1D sub-domains are coupled to obtain a 3D approach. ODTLES is applied to channel flow. Preliminary results for the pdf of the wall shear stress are compared to DNS.}, language = {en} } @misc{MovagharLinneOevermannetal., author = {Movaghar, Amirreza and Linne, Mark and Oevermann, Michael and Meiselbach, Falko T. and Schmidt, Heiko and Kerstein, Alan R.}, title = {Numerical investigation of turbulent-jet primary breakup using One-Dimensional Turbulence}, series = {International Journal of Multiphase Flow}, volume = {89}, journal = {International Journal of Multiphase Flow}, issn = {1879-3533}, pages = {241 -- 254}, abstract = {Primary breakup to form droplets at liquid surfaces is an important fundamental process to study as it determines the initial properties of the dispersed phase, which affect mixing rates, secondary breakup, droplet collisions, and flow separation within the dispersed flow region. Primary breakup can be regarded as one of the least developed model components for simulating and predicting liquid jet breakup. How- ever, it is of paramount importance in many technical applications, e.g. fuel injection in engines and spray painting. This paper presents a numerical investigation of primary breakup of a turbulent liquid jet in still air at standard conditions using the one-dimensional turbulence (ODT) modeling framework. ODT is a stochastic model that simulates turbulent flow evolution along a notional 1D line of sight by applying instantaneous maps to represent the effect of individual turbulent eddies on property profiles. An important feature of ODT is the resolution of all relevant scales, both temporal and spatial. The restriction to one spatial dimension in ODT permits affordable high resolution of interfacial and single-phase property gradients, which is key to capturing the local behavior of the breakup process and allows simulations at high Reynolds and Weber numbers that are currently not accessible to direct numerical simulations (DNS). This paper summarizes our extensions of the ODT model to simulate geometrically simple jet breakup problems, including representations of Rayleigh wave breakup, turbulent breakup, and shear-driven breakup. Each jet breakup simulation consists of a short temporal channel section to initialize a turbulent velocity profile at the nozzle exit followed by an adjacent jet section. The simulations are carried out for jet exit Reynolds number of 11,500, 23,000, 46,000 and 92,000 while the Weber number is varied within the range 102-107. We present results on breakup statistics including spatial locations of droplet release, droplet sizes and liquid core length. The results on primary breakup are compared to experimental results and models.}, language = {en} } @misc{GlaweSchmidtKersteinetal., author = {Glawe, Christoph and Schmidt, Heiko and Kerstein, Alan R. and Klein, Rupert}, title = {XLES Part II: From Extended Large Eddy Simulation to ODTLES}, series = {arXiv.org}, journal = {arXiv.org}, pages = {41}, abstract = {In turbulence research and flow applications, turbulence models like RaNS (Reynolds averaged Navier-Stokes) models and LES (Large Eddy Simulation) are used. Both models filter the governing flow equations. Thus a scale separation approach is introduced for modeling purposes with the large scales simulated using a numerical scheme while smaller scales are assumed to be less important and might be modeled more or less easily. Unfortunately small scales are frequently of big importance, e.g. in reactive flows, wall bounded flows, or flows with significant Prandtl or Schmidt number effects. Recent alternatives to these standard models are the class of models based on the one-dimensional turbulence (ODT) idea, like ODTLES. The ability of ODT to capture highly turbulent flows (recently up to Reτ=6×105) allows ODTLES to realize 3D resolutions basically independent of the turbulent intensity. In two papers we provide a formal theory and application of an innovative modeling strategy for highly turbulent flows in domains of moderate complexity: In part I (see Glawe et al. (2015)) a new general filtering approach, called XLES (extended LES), is introduced. Contrary to LES, XLES is based on 2D filtering of the governing equations, whereby additional small scale terms are interpreted numerically. In this work a new ansatz for the ODTLES model is introduced as one special approach in the XLES family of models by incorporating the ODT model into XLES. The ODT model introduces microstructures not captured by the XLES filtered equations. To illustrate the ODTLES model capabilities, turbulent channel and duct flows up to friction Reynolds number Reτ=10000 are studied.}, language = {en} } @misc{KleinSchmidtKerstein, author = {Klein, Marten and Schmidt, Heiko and Kerstein, Alan R.}, title = {Transition to the ultimate regime in a stochastic model for thermal convection with internal sources}, address = {IPAM Workshop: Transport and Mixing in Complex and Turbulent Flows (CTF2021), University of California, Los Angeles, CA, USA}, pages = {1}, language = {en} } @misc{JozefikKersteinSchmidtetal., author = {Jozefik, Zoltan and Kerstein, Alan R. and Schmidt, Heiko and Lyra, Sgouria and Kolla, Hemanth and Chen, Jackie H.}, title = {One-dimensional turbulence modeling of a turbulent counterflow flame with comparison to DNS}, series = {Combustion and Flame}, volume = {162}, journal = {Combustion and Flame}, number = {8}, issn = {1556-2921}, pages = {2999 -- 3015}, language = {en} } @inproceedings{GlaweSchmidtKerstein, author = {Glawe, Christoph and Schmidt, Heiko and Kerstein, Alan R.}, title = {ODTLES: Mulitscale turbulence modeling and buoyant application}, series = {Book of abstracts, 7th European Postgraduate Fluid Dynamics Conference, Ilmenau, Germany, 14th - 17th, July 2014}, booktitle = {Book of abstracts, 7th European Postgraduate Fluid Dynamics Conference, Ilmenau, Germany, 14th - 17th, July 2014}, address = {Ilmenau}, pages = {S.46}, language = {en} } @misc{SchmidtKersteinNedelecetal., author = {Schmidt, Heiko and Kerstein, Alan R. and N{\´e}d{\´e}lec, Renaud and Wunsch, Scott and Sayler, Ben J.}, title = {One-dimensional turbulence simulation of a laboratory analog of radiatively induced cloud-top entrainment}, language = {en} } @inproceedings{GlaweKleinKersteinetal., author = {Glawe, Christoph and Klein, Rupert and Kerstein, Alan R. and Schmidt, Heiko}, title = {Towards the simulation of gravity waves using the One-Dimensional Turbulence model}, series = {EGU General Assembly 2012, held 22-27 April, 2012 in Vienna}, booktitle = {EGU General Assembly 2012, held 22-27 April, 2012 in Vienna}, language = {en} } @inproceedings{StollbergSchmidtNamangoetal., author = {Stollberg, Christian and Schmidt, M. and Namango, Saul and Pohl, R. and Ay, Peter}, title = {Conditioning, Identification and Automatic Sorting of Plastic Automotive Parts for Productive Recycling}, series = {International Automobile Recycling Congress, IARC 2002, Geneva, Switzerland, March 13 - 15, 2002, proceedings}, booktitle = {International Automobile Recycling Congress, IARC 2002, Geneva, Switzerland, March 13 - 15, 2002, proceedings}, publisher = {ICM AG}, address = {Muri}, language = {en} } @misc{DudekLupinaKozłowskietal., author = {Dudek, Piotr T. and Lupina, Grzegorz and Kozłowski, Grzegorz and Zaumseil, Peter and Bauer, Jakob and Fursenko, Oksana and Dabrowski, Jarek Marek and Schmidt, R. and Lippert, Gunther and M{\"u}ssig, Hans-Joachim and Schr{\"o}der, Thomas and Schmeißer, Dieter and Zschech, Ehrenfried}, title = {Atomic-scale engineering of future high-k dynamic random access memory dielectrics: The example of partial Hf substitution by Ti in BaHfO3}, series = {Journal of Vacuum Science and Technology / B}, volume = {29}, journal = {Journal of Vacuum Science and Technology / B}, number = {1}, issn = {2166-2754}, language = {en} } @misc{BoehlerRosencrantzWolfetal., author = {B{\"o}hler, Stefan and Rosencrantz, Sophia and Wolf, Karina and Heinemann, Robert and Schmidt, Peer and Ganster, Johannes and B{\"u}sse, Thomas and Balko, Jens and Rosencrantz, Ruben R.}, title = {Active protease formulation in commodity polymers withstands melt processing into compounds and blown films}, series = {Materials Today Communications}, volume = {34}, journal = {Materials Today Communications}, issn = {2352-4928}, doi = {10.1016/j.mtcomm.2022.105018}, pages = {1 -- 9}, abstract = {Integrating enzymes into thermoplastic polymers is challenging due to their lack of robustness with respect to temperature and shear fields during conventional melt processing. In the present study, blown films from low-density polyethylene (LDPE) were prepared containing a technical protease from Bacillus sp. First, LDPE/protease compounds were produced followed by blown film extrusion, both processes at melt mass temperatures of 130 °C or higher. Enzyme activity was proven, both for the LDPE/protease compound and the blown film. The highest enzyme activity in the compound was determined for processing at 132 °C and a screw speed of 75 rpm. The influence of melt temperature and shear fields was studied in detail. Enzyme activities were determined for melt temperatures up to 160 °C and for screw speeds ranging from 75 to 300 rpm during compounding by twin-screw extrusion. The process was also applied for biobased and biodegradable polyesters, where similar protease activity after compounding was verified. Electron microscopy, X-ray diffraction, nuclear magnetic resonance spectroscopy and differential scanning calorimetry served to analyze components and morphology of the enzyme formulation used here. It is proposed that the porous morphology of the protease particles is beneficial for the enzyme to remain active after processing. Additionally, the polymer matrix surrounding the particles protects the protease at elevated temperatures, which can be attributed to thermal insulation. Thus, the right combination of a suited technical enzyme formulation with appropriate mild melt compounding conditions allows enzymes to be incorporated into thermoplastics and retain their activity. This opens the way to use the abundant biological functions of enzymes in thermoplastic applications.}, language = {en} } @inproceedings{BlehOstendorfMertenetal., author = {Bleh, D. and Ostendorf, Ralf and Merten, A. and Grahmann, Jan and Schenk, Harald and Kunzer, M. and Schmidt, R. and Wagner, J.}, title = {Miniaturization of a fast tunable external cavity QCL with customized gratings and MOEMS components}, series = {International Quantum Cascade Lasers School \& Workshop (IQCLSW), Policoro, Italy}, booktitle = {International Quantum Cascade Lasers School \& Workshop (IQCLSW), Policoro, Italy}, pages = {1 -- 2}, language = {en} } @inproceedings{SchmidtEgbersRath, author = {Schmidt, J.-R. and Egbers, Christoph and Rath, H. J.}, title = {Experiments on the isothermal flow in wide spherical gaps}, language = {en} }