@inproceedings{WendtSupikZhangetal., author = {Wendt, Jens and Supik, Vladimir and Zhang, Ping and Zhang, Jiulai}, title = {Mechanical Properties of Hot- rolled Magnesium AZ31 Sheets,}, language = {en} } @inproceedings{ZhangWendtZhangetal., author = {Zhang, Ping and Wendt, Jens and Zhang, J. and Holl{\"a}nder, F. and Supik, Vladimir}, title = {Superplasticity in hot-rolled magnesium alloy AZ31 sheets}, series = {Magnesium, proceedings of the 6th International Conference Magnesium Alloys and Their Applications, November 2003 in Wolfsburg}, booktitle = {Magnesium, proceedings of the 6th International Conference Magnesium Alloys and Their Applications, November 2003 in Wolfsburg}, editor = {Kainer, Karl Ulrich}, publisher = {Wiley-VCH}, address = {Weinheim}, isbn = {3-527-30975-6}, pages = {S. 439}, language = {de} } @misc{LiuDongZhangetal., author = {Liu, W. C. and Dong, J. and Zhang, Ping and Zhai, Chun-Quan and Ding, W. J.}, title = {Effect of Shot Peening on Surface Characteristics and Fatigue Properties of T5-treated ZK60 Alloy}, language = {en} } @article{Zhang, author = {Zhang, Ping}, title = {Creep behavior of the die-cast Mg-Al alloy AS21}, language = {en} } @misc{LiuDongZhangetal., author = {Liu, Wen-Cai and Dong, Jie and Zhang, Ping and Jin, Li and Zhai, Chun-Quan and Ding, Wen-Jiang}, title = {Fatigue behavior of hot-extruded Mg-10Gd-3Y magnesium alloy}, series = {Journal of materials research}, volume = {25}, journal = {Journal of materials research}, number = {4}, issn = {2044-5326}, pages = {784 -- 792}, language = {en} } @misc{ZhangLindemannLeyens, author = {Zhang, Ping and Lindemann, Janny and Leyens, Christoph}, title = {Shot peening on the high-strength wrought magnesium alloy AZ80 - Effect of peening media}, language = {en} } @misc{LiuDongZhangetal., author = {Liu, Wen-Cai and Dong, Jie and Zhang, Ping and Zheng, Xing-Wei and Ding, Wen-Jiang and Li, De-Hui and Korsunsky, Alexander M.}, title = {Smooth and notched fatigue performance of aging treated and shot peened ZK60 magnesium alloy}, series = {Journal of materials research}, volume = {25}, journal = {Journal of materials research}, number = {7}, issn = {2044-5326}, pages = {1375 -- 1387}, language = {en} } @misc{ZhangLindemannLeyens, author = {Zhang, Ping and Lindemann, Janny and Leyens, Christoph}, title = {Influence of shot peening on notched fatigue strength of the high-strength wrought magnesium alloy AZ80}, series = {Journal of alloys and compounds}, volume = {497}, journal = {Journal of alloys and compounds}, number = {1-2}, issn = {0925-8388}, pages = {380 -- 385}, language = {en} } @misc{ZhangFloresRenteriaWildetal., author = {Zhang, Ping and Flores Renteria, Arturo and Wild, E. and Reimers, W. and Leyens, Christoph}, title = {Oxidation-resistant Ti-90Al coatings with lotus effect surfacemorphology deposited on a gamma-TiAl alloy}, series = {Scripta Materialia}, volume = {61}, journal = {Scripta Materialia}, number = {12}, issn = {1359-6462}, pages = {1156 -- 1159}, abstract = {Ti-90Al (in at.\%) coatings were deposited on Ti-45Al-8Nb alloy at two different temperatures, 300 and 540 °C. The coatingsputtered at 300 °C consisted of Al and TiAl3 with columnar grain structure. The morphology, chemical composition and microstructureof the coating sputtered at540 °Cwere strongly dependent on the substrate microstructure. The two coating variantsformed oxidation-resistant Al2O3 scales during oxidation. The special morphological features of the coatings make them interestingfor geometrically structuring the surfaces to provoke the lotus effect.}, language = {en} } @misc{LiuDongZhangetal., author = {Liu, W. C. and Dong, J. and Zhang, Ping and Yao, Z. Y. and Zhai, Chun-Quan and Ding, W. J.}, title = {High cycle fatigue behaviour of as-extruded ZK60 magnesium alloy}, language = {en} } @misc{ZhangDingLindemannetal., author = {Zhang, Ping and Ding, W. J. and Lindemann, Janny and Leyens, Christoph}, title = {Mechanical properties of the hot-rolled Mg-12Gd-3Y magnesium alloy}, abstract = {Tensile and high cycle fatigue (HCF) properties of the hot-rolled Mg-12Gd-3Y (wt.\%) magnesium alloyhave been investigated. The magnesium alloy exhibits a fatigue strength of about 150 MPa, which ismuch higher than that of the commercial Mg-8Al-Zn alloy AZ80. Aging heat-treatment (T5) improvedthe fatigue life of the Mg-12Gd-3Y alloy. Fatigue cracks nucleated at the intense slip bands in theas-rolled alloy. After T5 treatment, however, the fatigue crack nucleation site shifted to the phase boundariesbetween MgGdY particles and Mg matrix. T5 heat-treatment retarded the crack initiation and thusimproved the fatigue life of the Mg-12Gd-3Y alloy.}, language = {de} } @inproceedings{LiuDongZhang, author = {Liu, W. C. and Dong, J. and Zhang, Ping}, title = {Effect of Shot Peening on High Cycle Fatigue Performance of Mg-10Gd-3Y-0.5Zr Magnesium Alloy}, series = {Magnesium Technology 2010, Proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of TMS}, booktitle = {Magnesium Technology 2010, Proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of TMS}, editor = {Agnew, Sean A.}, publisher = {The Minerals, Metals \& Materials Society}, address = {Pennsylvania}, isbn = {978-0-87339-746-9}, pages = {255 -- 260}, language = {en} } @inproceedings{ZhangLindemannLeyens, author = {Zhang, Ping and Lindemann, Janny and Leyens, Christoph}, title = {Surface rolling on the high-strength wrought magnesium alloy AZ80}, language = {en} } @misc{DueringKarabetViehwegeretal., author = {D{\"u}ring, Michael and Karabet, Andrey and Viehweger, Bernd and Lindemann, Janny and Zhang, Ping}, title = {Magnesium-Knetlegierungen : Innovative Leichtbauwerkstoffe f{\"u}r den Automobilbau}, series = {Forum der Forschung}, volume = {10}, journal = {Forum der Forschung}, number = {19}, issn = {0947-6989}, pages = {41 -- 46}, abstract = {Wenngleich der Verwendung von Mg-Knetlegierungen im Automobilbau ein großes Potenzial zugesprochen wird, ist deren Einsatz bislang von geringer Bedeutung geblieben. Im Rahmen des vom BMBF-gef{\"o}rderten Verbundforschungsvorhabens "MIA-Magnesium im Automobilbau" wurden daher in Zusammenarbeit der Firmen DaimlerChrysler AG, ThyssenKrupp Umformtechnik GmbH, Otto Fuchs Metallwerke KG, Honsel GmbH \& Co. KG, GP Innovation GmbH, OSK Kiefer GmbH sowie der BTU Cottbus die Grundlagen f{\"u}r die prototypische Fertigung von Bauteilen aus den Mg-Knetlegierungen des Typs AZ31 und AZ 80 erarbeitet.}, language = {de} } @article{ZhangLindemannLeyens, author = {Zhang, Ping and Lindemann, Janny and Leyens, Christoph}, title = {Influence of texture and microstructure on mechanical properties of high-strength wrought magnesium alloy AZ80}, language = {en} } @inproceedings{ZhangLindemannKieferetal., author = {Zhang, Ping and Lindemann, Janny and Kiefer, A. and Leyens, Christoph}, title = {Mechanical surface treatments on the high-strength wrought magnesium alloy AZ80}, series = {Proceedings of the 9th International Conference on Shot Peening, Paris, 6 - 9 September 2005}, booktitle = {Proceedings of the 9th International Conference on Shot Peening, Paris, 6 - 9 September 2005}, isbn = {978-2-907669-37-5}, pages = {308 -- 313}, language = {en} } @article{ZhangLindemann, author = {Zhang, Ping and Lindemann, Janny}, title = {Effect of roller burnishing on the high cycle fatigue performance of the high-strength wrought magnesium alloy AZ80}, language = {en} } @misc{BlumLiZengetal., author = {Blum, Wolfgang and Li, Yujiao and Zeng, X. H. and Zhang, Ping and Grossmann, Berthold von and Haberling, Christoph}, title = {Creep deformation mechanisms in high-pressure die-cast magnesium-aluminum-base alloys}, series = {Metallurgical and Materials Transactions / A}, volume = {36}, journal = {Metallurgical and Materials Transactions / A}, number = {7}, issn = {1543-1940}, doi = {10.1007/s11661-005-0036-0}, pages = {1721 -- 1728}, language = {en} } @misc{HaagWannerClemensetal., author = {Haag, M. and Wanner, Alexander and Clemens, Helmut and Zhang, Ping and Kraft, Oliver and Arzt, Eduard}, title = {Creep of aluminum-based closed-cell foams}, series = {Metallurgical and Materials Transactions A}, volume = {34A}, journal = {Metallurgical and Materials Transactions A}, number = {12}, issn = {1073-5623}, doi = {10.1007/s11661-003-0182-1}, pages = {2809 -- 2817}, language = {en} }