@inproceedings{Pasternak, author = {Pasternak, Hartmut}, title = {Die Cargolifter-Halle in Brand}, series = {23. Stahlbauseminar 2001, am 16./17. 2. 01 in Neu-Ulm und am 23./14 2. 01 in Wien}, booktitle = {23. Stahlbauseminar 2001, am 16./17. 2. 01 in Neu-Ulm und am 23./14 2. 01 in Wien}, publisher = {Bauakademie}, address = {Biberach}, language = {de} } @inproceedings{PasternakKomann, author = {Pasternak, Hartmut and Komann, Steffen}, title = {About the role of longitudinal stiffeners in silos}, series = {Xth International Scientific - Technical Conference "Metal Structures" - Gdansk 2001}, booktitle = {Xth International Scientific - Technical Conference "Metal Structures" - Gdansk 2001}, language = {en} } @inproceedings{PasternakSchillingKomann, author = {Pasternak, Hartmut and Schilling, S. and Komann, Steffen}, title = {The steel construction of the new CargoLifter Airship Hangar}, series = {Proceedings of the International Conference on Structural Engineering, Mechanics and Computation, 2 - 4 April 2001, vol. 1}, booktitle = {Proceedings of the International Conference on Structural Engineering, Mechanics and Computation, 2 - 4 April 2001, vol. 1}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, isbn = {0-08-043948-9}, pages = {173 -- 182}, language = {en} } @inproceedings{PiekarczykPieciorakPasternaketal., author = {Piekarczyk, Marek and Pieciorak, E. and Pasternak, Hartmut and Kubieniec, Gabriel}, title = {Experimental research and integrated modelling with shell finite elements for sheet roof covering}, series = {Shell Structure: Theory and Applications - SSTA 2009}, booktitle = {Shell Structure: Theory and Applications - SSTA 2009}, publisher = {Taylor \& Francis}, isbn = {978-0-415-54883-0}, pages = {319 -- 322}, language = {en} } @book{PasternakHochFueg, author = {Pasternak, Hartmut and Hoch, Hans-Ullrich and F{\"u}g, Dieter}, title = {Stahltragwerke im Industriebau}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {978-3-433-01849-1}, pages = {304}, language = {de} } @book{PasternakMarosi, author = {Pasternak, Hartmut and Marosi, A.}, title = {Tragverhalten von Hallen mit Flanschstreben}, publisher = {Frauenhofer IRB Verlag}, address = {Stuttgart}, isbn = {978-3-8167-7949-0}, pages = {68}, language = {de} } @misc{MeinzPasternak, author = {Meinz, J{\"o}rg and Pasternak, Hartmut}, title = {Zum vereinfachten rechnerischen Nachweis von Klebverbindungen im Stahlbau}, series = {Bauingenieur}, volume = {86}, journal = {Bauingenieur}, number = {6}, issn = {0005-6650}, pages = {262 -- 268}, language = {de} } @misc{PasternakRobra, author = {Pasternak, Hartmut and Robra, J{\"o}rgen}, title = {Eurocode - Bemessung und Konstruktion von Stahlbauten}, series = {Bauingenieur}, volume = {86}, journal = {Bauingenieur}, number = {7/8}, issn = {0005-6650}, pages = {336 -- 347}, language = {de} } @misc{PasternakRobraBachmann, author = {Pasternak, Hartmut and Robra, J{\"o}rgen and Bachmann, Volkmar}, title = {Wellstegtr{\"a}ger mit gr{\"o}ßeren Stegblechdicken - Fertigungstechnologie und Tragverhalten}, series = {Bauingenieur}, volume = {84}, journal = {Bauingenieur}, number = {10}, issn = {0005-6650}, pages = {415 -- 419}, language = {de} } @misc{PasternakBartholome, author = {Pasternak, Hartmut and Bartholom{\´e}, Susanne Elisabeth}, title = {Versuche zu Stahltr{\"a}gern mit strukturiertem Steg}, series = {Bauingenieur}, volume = {87}, journal = {Bauingenieur}, number = {10}, issn = {0005-6650}, pages = {417 -- 422}, language = {de} } @misc{PasternakMueller, author = {Pasternak, Hartmut and M{\"u}ller, Lars}, title = {Thermovision - Entwicklung eines neuen Verfahrens zur Dehnungsanalyse beanspruchter Stahlbauteile}, series = {Stahlbau}, volume = {71}, journal = {Stahlbau}, number = {7}, issn = {0038-9145}, pages = {523 -- 536}, language = {de} } @misc{PasternakSchwarzlos, author = {Pasternak, Hartmut and Schwarzlos, Anja}, title = {Zur Interaktion zwischen Biegemoment und Normalkraft bei nachgiebigen Verbindungen}, series = {Bauingenieur}, volume = {77}, journal = {Bauingenieur}, number = {5}, issn = {0005-6650}, pages = {199 -- 207}, language = {de} } @misc{PasternakMueller, author = {Pasternak, Hartmut and M{\"u}ller, Lars}, title = {Untersuchung des thermoplastischen Verhaltens verschiedener Baustoffe mit Hilfe der Thermovision}, series = {Bauingenieur}, volume = {78}, journal = {Bauingenieur}, number = {5}, issn = {0005-6650}, pages = {221 -- 230}, language = {de} } @misc{PasternakKomann, author = {Pasternak, Hartmut and Komann, Steffen}, title = {Diskret gelagerte, axialbelastete und {\"u}ber den Auflagern l{\"a}ngsversteifte Kreiszylinderschalen}, series = {Bauingenieur}, volume = {79}, journal = {Bauingenieur}, number = {10}, issn = {0005-6650}, pages = {443 -- 446}, language = {de} } @techreport{PasternakDilger, author = {Pasternak, Hartmut and Dilger, Klaus}, title = {Einsatz der Schweißsimulation zur systematischen Entwicklung verbesserter Modelle f{\"u}r die Berechnung der Tragf{\"a}higkeit komplexer Stahlleichtbaustrukturen}, publisher = {Verlag und Vertriebsgesellschaft mbH}, address = {D{\"u}sseldorf}, isbn = {978-3-942541-31-2}, pages = {181}, language = {de} } @misc{CiupackPasternak, author = {Ciupack, Yvonne and Pasternak, Hartmut}, title = {Kleben, eine innovative F{\"u}getechnik im Stahlbau : Eurocode-basiertes Bemessungskonzept f{\"u}r Stahlklebverbindungen}, series = {BTU News : Zeitung der Brandenburgischen Technischen Universit{\"a}t Cottbus}, volume = {7}, journal = {BTU News : Zeitung der Brandenburgischen Technischen Universit{\"a}t Cottbus}, number = {32}, pages = {S. 35}, language = {de} } @misc{PasternakMeinz, author = {Pasternak, Hartmut and Meinz, J{\"o}rg}, title = {Versuche zu geklebten Verst{\"a}rkungen im Stahlhochbau}, series = {Bauingenieur}, volume = {81}, journal = {Bauingenieur}, number = {5}, issn = {0005-6650}, pages = {212 -- 217}, language = {de} } @misc{RudorfWitrinStimpfleBluemeletal., author = {Rudorf-Witrin, Wolfgang and Stimpfle, Bernd and Bl{\"u}mel, S. and Pasternak, Hartmut}, title = {Von der CargoLifter-Werfthalle zu Tropical Islands - Konstruktion, Herstellung und Montage der neuen ETFE-Folienkissen-Eindeckung}, series = {Bauingenieur}, volume = {81}, journal = {Bauingenieur}, number = {1}, issn = {0005-6650}, pages = {33 -- 42}, language = {de} } @misc{PasternakRobra, author = {Pasternak, Hartmut and Robra, J{\"o}rgen}, title = {Eurocode 3 - Bemessung und Konstruktion von Stahlbauten}, series = {Bauingenieur}, volume = {86}, journal = {Bauingenieur}, number = {7/8}, issn = {0005-6650}, pages = {336 -- 347}, language = {de} } @incollection{PasternakKubieniecPiekarczyk, author = {Pasternak, Hartmut and Kubieniec, Gabriel and Piekarczyk, Marek}, title = {Adhesives in strengthening of steel structures}, series = {Protection of historical buildings, PROHITECH 09, proceedings of the International Conference on Protection of Historical Buildings, Rome, Italy, 21 - 24 June 2009, vol. 1}, booktitle = {Protection of historical buildings, PROHITECH 09, proceedings of the International Conference on Protection of Historical Buildings, Rome, Italy, 21 - 24 June 2009, vol. 1}, publisher = {Taylor \& Francis Group}, address = {London [u.a.]}, isbn = {978-0-415-55803-7}, pages = {551 -- 556}, language = {en} } @misc{BoehmePasternakCsesznak, author = {B{\"o}hme, Wilfried and Pasternak, Hartmut and Cseszn{\´a}k, Andras}, title = {Sanierung einer Schwimmhalle in Potsdam}, series = {Bauingenieur}, volume = {84}, journal = {Bauingenieur}, number = {3}, issn = {0005-6650}, pages = {95 -- 100}, language = {de} } @misc{PasternakKubieniec, author = {Pasternak, Hartmut and Kubieniec, Gabriel}, title = {Plate girders with corrugated webs}, series = {Journal of Civil Engineering and Management}, volume = {16}, journal = {Journal of Civil Engineering and Management}, number = {2}, issn = {0733-9364}, pages = {166 -- 171}, language = {en} } @misc{PasternakBachmannKubieniec, author = {Pasternak, Hartmut and Bachmann, Volkmar and Kubieniec, Gabriel}, title = {Leichte Fachwerktr{\"a}ger - Fertigungstechnologie und Tragverhalten}, series = {Bauingenieur}, volume = {85}, journal = {Bauingenieur}, number = {10}, issn = {0005-6650}, pages = {412 -- 420}, language = {de} } @misc{CiupackPasternak, author = {Ciupack, Yvonne and Pasternak, Hartmut}, title = {Thermisch getrennte Stirnplattenst{\"o}ße}, series = {Bauingenieur}, volume = {88}, journal = {Bauingenieur}, number = {12}, issn = {0005-6650}, pages = {532 -- 525}, language = {de} } @misc{PasternakCiupack, author = {Pasternak, Hartmut and Ciupack, Yvonne}, title = {Development of Eurocode-based design rules for adhesive bonded joints}, series = {International Journal of Adhesion and Adhesives}, volume = {53}, journal = {International Journal of Adhesion and Adhesives}, issn = {1879-0127}, doi = {10.1016/j.ijadhadh.2014.01.011}, pages = {97 -- 106}, language = {en} } @misc{PasternakCiupack, author = {Pasternak, Hartmut and Ciupack, Yvonne}, title = {Kalibrierung von Bemessungskonzepten gem{\"a}ß Eurocode am Beispiel von Klebverbindungen}, series = {Bauingenieur}, volume = {87}, journal = {Bauingenieur}, number = {3}, issn = {0005-6650}, pages = {116 -- 123}, language = {de} } @misc{PasternakBretschneider, author = {Pasternak, Hartmut and Bretschneider, Tino}, title = {Inspektion und Unterhaltung von Hochbautragwerken mit hoher Schadensfolge - Praxisbericht Tropical Islands}, series = {Bauingenieur}, volume = {82}, journal = {Bauingenieur}, number = {12}, issn = {0005-6650}, pages = {536 -- 541}, language = {de} } @misc{PasternakMeinz, author = {Pasternak, Hartmut and Meinz, J{\"o}rg}, title = {Kleben im Stahlbau - zwei Beispiele aus dem Fassadenbau}, series = {Bauingenieur}, volume = {82}, journal = {Bauingenieur}, number = {3}, issn = {0005-6650}, pages = {115 -- 124}, language = {de} } @misc{PasternakHannebauer, author = {Pasternak, Hartmut and Hannebauer, Dina}, title = {Zur Einleitung großer Querkr{\"a}fte in Wellstegtr{\"a}ger}, series = {Bauingenieur}, volume = {79}, journal = {Bauingenieur}, number = {5}, issn = {0005-6650}, pages = {246 -- 252}, language = {de} } @incollection{PasternakHannebauer, author = {Pasternak, Hartmut and Hannebauer, Dina}, title = {Tr{\"a}ger mit profilierten Stegen}, series = {Stahlbau-Kalender 2004}, booktitle = {Stahlbau-Kalender 2004}, publisher = {Verlag Ernst}, address = {Berlin}, isbn = {3-433-01703-4}, pages = {449 -- 492}, language = {de} } @misc{PasternakBluemelStimpfleetal., author = {Pasternak, Hartmut and Bl{\"u}mel, Stefan and Stimpfle, Bernd and Rudorf-Witrin, Wolfgang}, title = {Von der CargoLifter-Werfthalle zu Tropical Islands - Entwurf}, series = {Bauingenieur}, volume = {80}, journal = {Bauingenieur}, issn = {0005-6650}, pages = {461 -- 469}, language = {de} } @incollection{PasternakSchwarzlos, author = {Pasternak, Hartmut and Schwarzlos, Anja}, title = {Kleben von Stahl}, series = {Stahlbau-Kalender 2005}, booktitle = {Stahlbau-Kalender 2005}, publisher = {Verlag Ernst}, address = {Berlin}, isbn = {3-433-01721-2}, pages = {785 -- 818}, language = {de} } @misc{PasternakKrauscheLaunert, author = {Pasternak, Hartmut and Krausche, Thomas and Launert, Benjamin}, title = {Schweißen von Tr{\"a}gern mit dicken Blechen, Teil 2: Schweißen unter Baustellenbedingungen - Montagestoß und Variation der Umgebungstemperatur}, series = {Bauingenieur}, volume = {89}, journal = {Bauingenieur}, number = {12}, issn = {0005-6650}, pages = {537 -- 547}, language = {de} } @inproceedings{PasternakLaunert, author = {Pasternak, Hartmut and Launert, Benjamin}, title = {Erh{\"o}hung der Tragf{\"a}higkeit geschweißter I-Profile aus hochfestem Baustahl - Verbesserte Ans{\"a}tze zur Eigenspannungserfassung}, series = {19. DASt-Forschungskolloquium, 27.-28.Oktober 2014, Hannover}, booktitle = {19. DASt-Forschungskolloquium, 27.-28.Oktober 2014, Hannover}, publisher = {DASt}, address = {D{\"u}sseldorf}, isbn = {978-3-929371-33-8}, language = {de} } @misc{PasternakKrauscheLaunert, author = {Pasternak, Hartmut and Krausche, Thomas and Launert, Benjamin}, title = {Schweißen von Tr{\"a}gern mit dicken Blechen, Teil 1: Tr{\"a}gerfertigung unter Werksbedingungen - Planung, Herstellung und Simulation}, series = {Bauingenieur}, volume = {89}, journal = {Bauingenieur}, number = {10}, issn = {1436-4867}, pages = {395 -- 404}, language = {de} } @inproceedings{PasternakChwastek, author = {Pasternak, Hartmut and Chwastek, Agnieszka}, title = {Beitrag zur Entwicklung eines Bemessungskonzeptes f{\"u}r Dauerfestigkeitsberechnungen von Reparaturschweißungen}, series = {19. DASt-Forschungskolloquium in Hannover, 27. - 28. Oktober 2014}, booktitle = {19. DASt-Forschungskolloquium in Hannover, 27. - 28. Oktober 2014}, publisher = {Frehner Consulting GmbH Deutschland}, address = {D{\"u}sseldorf [u.a.]}, isbn = {978-3-929371-33-8}, pages = {143 -- 148}, language = {de} } @misc{PasternakSahellie, author = {Pasternak, Hartmut and Sahellie, Samer}, title = {Epoxy- and acrylic-bonded joints for strengthening lightweight steel girders}, series = {Stahlbau}, volume = {84}, journal = {Stahlbau}, number = {8}, issn = {0038-9145}, pages = {577 -- 583}, language = {en} } @misc{PasternakSahellie, author = {Pasternak, Hartmut and Sahellie, Samer}, title = {Expectancy of the lifetime of bonded steel joints due to long-term shear loading}, series = {Archives of Civil and Mechanical Engineering}, volume = {15}, journal = {Archives of Civil and Mechanical Engineering}, number = {4}, issn = {1644-9665}, doi = {10.1016/j.acme.2015.05.004}, pages = {1061 -- 1069}, language = {en} } @misc{PasternakCiupackSchieletal., author = {Pasternak, Hartmut and Ciupack, Yvonne and Schiel, Manuel and Ince, Erdeniz}, title = {Adhesive bonded joints in steel structures}, series = {Steel Construction}, volume = {7}, journal = {Steel Construction}, number = {3}, issn = {1867-0539}, pages = {173 -- 182}, language = {en} } @inproceedings{PasternakSahellie, author = {Pasternak, Hartmut and Sahellie, Samer}, title = {Concentration of the normal stresses in the adherends of adhesively-bonded double lap steel joints due to reducing the width of the bonded area}, series = {14th International Scientific Conference VSU 2014, Sofia, 2014, vol. 2}, booktitle = {14th International Scientific Conference VSU 2014, Sofia, 2014, vol. 2}, publisher = {Univ. of Structural Engineering and Architecture}, address = {Sofia}, pages = {197 -- 202}, language = {en} } @misc{SchlaichBleicherPasternak, author = {Schlaich, Mike and Bleicher, Achim and Pasternak, Hartmut}, title = {Der Porsche Pavillon in Monocoque-Bauweise}, series = {Bauingenieur}, volume = {89}, journal = {Bauingenieur}, number = {1}, issn = {1436-4867}, pages = {1 -- 10}, language = {de} } @misc{PasternakKrauscheNiemann, author = {Pasternak, Hartmut and Krausche, Thomas and Niemann, M.}, title = {Umbau eines Schulgeb{\"a}udes der Heinrich-Nordhoff-Gesamtschule in Wolfsburg}, series = {Bauingenieur}, volume = {89}, journal = {Bauingenieur}, number = {4}, issn = {1436-4867}, pages = {182 -- 185}, language = {de} } @misc{FeldmannGesslerUmmenhoferetal., author = {Feldmann, Markus and Geßler, Achim and Ummenhofer, Thomas and G{\"o}tz, Frank and Bartholom{\´e}, Susanne Elisabeth and Pasternak, Hartmut}, title = {Zum Kleben von CFK-Lamellen im Stahlbau}, series = {BTU Stahlbau-Symposium 2014, Cottbus, 2014}, journal = {BTU Stahlbau-Symposium 2014, Cottbus, 2014}, publisher = {BTU}, address = {Cottbus [u.a.]}, pages = {83 -- 90}, language = {de} } @misc{PasternakChwastek, author = {Pasternak, Hartmut and Chwastek, Agnieszka}, title = {Zur Entwicklung eines Bemessungskonzeptes f{\"u}r die Lebensdauer von Reparaturschweißungen. Teil 1 - Stand der Technik und Versuche}, series = {Bauingenieur}, volume = {90}, journal = {Bauingenieur}, number = {2}, issn = {1436-4867}, pages = {47 -- 54}, language = {de} } @misc{PasternakLaunertKrausche, author = {Pasternak, Hartmut and Launert, Benjamin and Krausche, Thomas}, title = {Welding of girders with thick plates — Fabrication, measurement and simulation}, series = {Journal of Constructional Steel Research}, volume = {Vol. 115}, journal = {Journal of Constructional Steel Research}, issn = {0143-974X}, doi = {10.1016/j.jcsr.2015.08.037}, pages = {407 -- 416}, abstract = {This article presents experimental and numerical results of the fabrication of welded plate girders under workshop conditions. Main concerns are the prediction of imperfections with the aid of simulation tools and/or simplified engineering models. Their impact on the component design is evaluated in a case study. Special focus is put on the effect of residual welding stress. For this, different simplified distributions are compared with results from welding simulation. The findings confirm the thesis that present recommendations on the implementation of weld-induced imperfections must be rated conservative. This suggests that it is necessary to establish new models. Guidance on future problems in this context will be given.}, language = {en} } @misc{PasternakKrausche, author = {Pasternak, Hartmut and Krausche, Thomas}, title = {The Porsche Pavilion in the Autostadt Wolfsburg, Germany}, series = {Procedia Engineering}, journal = {Procedia Engineering}, number = {57}, issn = {1877-7058}, doi = {10.1016/j.proeng.2013.04.010}, pages = {63 -- 69}, language = {en} } @book{NitschkePagelKlassenPasternaketal., author = {Nitschke-Pagel, Thomas and Klassen, Jakob and Pasternak, Hartmut and Launert, Benjamin and Krausche, Thomas}, title = {P 858 - Schweißen dicker Bleche unter Baustellenbedingungen - Beurteilung des Einflusses auf das Tragverhalten von Montagest{\"o}ßen}, publisher = {Verlag und Vertriebsgesellschaft mbH}, address = {D{\"u}sseldorf}, isbn = {978-3-942541-69-5}, abstract = {Beim Aufbau großer Stahlstrukturen im Br{\"u}cken- oder Stahlhochbau wird heute vermehrt auf modulare Fabrikfertigung gesetzt. Ein F{\"u}gen dieser Module auf der Baustelle zu einer Gesamtstruktur ist aber weiterhin notwendig. Als F{\"u}geverfahren wird hier h{\"a}ufig das MAG-Mehrlagenschweißen eingesetzt. Gerade an dicken Blechen stellen Baustellenschweißungen nicht nur besondere Anforderungen an den ausf{\"u}hrenden Betrieb, die Bauleitung und Bau{\"u}berwachung, sondern auch an den Konstrukteur. Wichtig f{\"u}r den Konstrukteur ist die Kenntnis der sich durch Schweißungen einstellenden Schrumpfung der Bauteile, der auftretenden Verz{\"u}ge und Eigenspannungen. Gerade bei Baustellenschweißungen m{\"u}ssen diese Aspekte in der Konstruktionsphase der Einzelkomponenten mit ber{\"u}cksichtigt werden, um die erforderlichen Toleranzen bei der Montage einzuhalten. Eine genaue Kenntnis der durch Schweißungen verursachten Ph{\"a}nomene ist in den Konstruktions- und Montagebetrieben oft nur aus mehrj{\"a}hrigen Erfahrungen vorhanden. Ein grundlegendes, vollst{\"a}ndiges Bild der Abl{\"a}ufe beim Schweißen auf der Baustelle, das es erm{\"o}glicht, dieses Wissen auf neue Konstruktionen zu {\"u}bertragen, fehlt bisher. Insbesondere f{\"u}r die immer {\"o}fter im Br{\"u}cken- und Stahlhochbau eingesetzten h{\"o}herfesten Feinkornbaust{\"a}hle (z.B. S460) ist die Kenntnis des Verhaltens bei Baustellenschweißungen notwendig. Hier setzt der Forschungsantrag an. Mit Hilfe der Schweißsimulation k{\"o}nnen die Auswirkungen von Schweißn{\"a}hten, wie die Entstehung von Verz{\"u}gen und Eigenspannungen am Bauteil, global dargestellt werden. Eine anschließende Struktursimulationen (Festigkeits- und Steifigkeitsberechnungen) mit aus der Schweißsimulation integrierten Ergebnissen bildet die Basis f{\"u}r erg{\"a}nzende Untersuchungen. Montagest{\"o}ße sind außerdem durch Verschmutzung und Witterung negativ beeinflusst. Die Montage kann beispielsweise bei niedrigen Temperaturen unterhalb des Gefrierpunkts durchgef{\"u}hrt werden m{\"u}ssen. Diese Situation wurde in einer Klimakammer simuliert und die Auswirkungen der Umgebungstemperatur bei der Montage auf das Tragverhalten der Verbindung untersucht. F{\"u}r die im Rahmen des Vorhabens untersuchten F{\"a}lle ist kein Einfluss variierender Umgebungstemperaturen bis -10 °C auf die resultierenden Schweißeigenspannungen festzustellen. Der Vergleich von Verzug und Eigenspannung gegen{\"u}ber normativ vorgegeben Toleranzwerten sowie vereinfachten Ingenieurmodellen f{\"u}r die Approximation des Eigenspannungsverlaufs zeigt große Defizite. Bei realit{\"a}tsnaher Implementierung der Eigenspannungen in die Traglastberechnung k{\"o}nnen z.T. große Reserven im Rahmen der nichtlinearen Traglastberechnung ausgenutzt werden.}, language = {de} } @misc{PasternakKubieniec, author = {Pasternak, Hartmut and Kubieniec, Gabriel}, title = {Implementation of longitudinal welding stresses into structural calculation of steel structures}, series = {JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT}, volume = {22}, journal = {JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT}, number = {1}, issn = {1392-3730}, doi = {10.3846/13923730.2014.994029}, pages = {47 -- 55}, language = {en} } @misc{PasternakSahellie, author = {Pasternak, Hartmut and Sahellie, Samer}, title = {Conversion factors of the temperature effect on the shear strength of adhesively bonded steel joints}, series = {Journal of civil engineering and management}, volume = {22}, journal = {Journal of civil engineering and management}, number = {5}, issn = {1392-3730}, doi = {10.3846/13923730.2015.1068848}, pages = {666 -- 672}, language = {en} } @inproceedings{LaunertRhodePasternaketal., author = {Launert, Benjamin and Rhode, Michael and Pasternak, Hartmut and Kannengießer, Thomas}, title = {Welding residual stresses in high-strength steel. Experimental results}, series = {The International Colloquium on Stability and Ductility of Steel Structures}, booktitle = {The International Colloquium on Stability and Ductility of Steel Structures}, editor = {Dubina, Dan and Ungureanu, Viorel}, edition = {2016 edition}, publisher = {Ernst \& Sohn}, isbn = {978-92-9147-133-1}, pages = {517 -- 524}, abstract = {This article presents the latest results of an ongoing national research project on improved models for the prediction of welding residual stresses of thick-plated welded I-girders. The experimental program is presented and the importance of different influencing factors on the residual stresses is discussed in detail. All results are compared for mild (S355J2+N) and high strength (S690QL) steel. Finally, conclusions for further works are drawn.}, language = {en} } @inproceedings{CiupackPasternakLedeckyetal., author = {Ciupack, Yvonne and Pasternak, Hartmut and Ledecky, Lukas and Mette, Christoph and Stammen, Elisabeth and Dilger, Klaus}, title = {Adhesive bonded steel structures under cyclic loading}, series = {Proceedings of the METNET Seminar 2015 in Budapest, 2015}, booktitle = {Proceedings of the METNET Seminar 2015 in Budapest, 2015}, editor = {Virdi, Kuldeep and Tenhunen, Lauri}, publisher = {HAMK University of Applied Sciences}, address = {H{\"a}meenlinna}, isbn = {978-951-784-762-9}, pages = {90 -- 101}, language = {en} } @inproceedings{JaegerPasternak, author = {J{\"a}ger, A. and Pasternak, Hartmut}, title = {Grundlegende Studien zum Beulverhalten von engringversteiften Kreiszylinderschalen unter Axialdruck}, series = {Offen im Denken, 20. DASt-Forschungskolloquium in Essen, 08./09. M{\"a}rz 2016}, booktitle = {Offen im Denken, 20. DASt-Forschungskolloquium in Essen, 08./09. M{\"a}rz 2016}, publisher = {Deutscher Ausschuß f{\"u}r Stahlbau DASt}, address = {D{\"u}sseldorf}, isbn = {978-3-941687-19-6}, pages = {38 -- 42}, language = {de} } @misc{LaunertRhodeKrommetal., author = {Launert, Benjamin and Rhode, Michael and Kromm, Arne and Pasternak, Hartmut and Kannengießer, Thomas}, title = {Measurement and numerical modeling of residual stresses in welded HSLA component-like I-girders}, series = {Welding in the World}, volume = {61}, journal = {Welding in the World}, number = {2}, issn = {0043-2288}, doi = {10.1007/s40194-016-0413-x}, pages = {223 -- 229}, abstract = {The present contribution shows the residual stress results obtained from experiments with the sectioning method in comparison to global (structural) welding simulation models on component-like (i.e., large scale) I-girders made of structural steel grades S355 and S690QL. Plates were welded by conventional gas metal arc welding using two different heat inputs. In addition, the base material was assumed to be approximately stress-free. Based on these results, conclusions and recommendations for the design of welded I-girders are drawn.}, language = {en} } @misc{LaunertSzczerbaGajewskietal., author = {Launert, Benjamin and Szczerba, Radosław and Gajewski, Marcin and Rhode, Michael and Pasternak, Hartmut and Giżejowski, Marian}, title = {The buckling resistance of welded plate girders taking into account the influence of post-welding imperfections - Part 1: Parameter study}, series = {Materials Testing}, volume = {59}, journal = {Materials Testing}, number = {1}, issn = {0025-5300}, doi = {10.3139/120.110964}, pages = {47 -- 56}, abstract = {Welding is the most important joining technique and offers the advantage of customizable plate thicknesses. On the other hand, welding causes residual stresses and deformations influencing the load carrying capacity. Their consideration in the design requires simple and fast models. Though welding simulation has contributed to accurately access to these values nowadays, their application to large components remains still in a less practicable range. Nevertheless, many studies emphasized the need to make corrections in recently available simplified models. Especially the influence of residual stresses seems somewhat overestimated in many cases if comparing conventional structural steel S355 and high-strength steel S690. In times of computer-aided design, an improved procedure to implement weld-inducted imperfections appears overdue. This will be presented in two parts. The first part illustrates the potential influence of post-welding imperfections exemplified for weak axis buckling in comparison with the general method in accordance with Eurocode 3. Residual stresses and initial crookedness were varied systematically in order to produce a scatter band of capacities. An approach to characterize the borders of these imperfections was undertaken before that. The excessive scattering of reduction factors for the load bearing capacity demonstrates the importance of these variables. Results were finally evaluated against advanced simulation models which will be further detailed in part two of this contribution.}, language = {en} } @inproceedings{CiupackPasternak, author = {Ciupack, Yvonne and Pasternak, Hartmut}, title = {Bonding Technology in Steel Structures, a Summary of Research Activities at Chair of Steel and Timber Structures}, series = {Proceedings of the METNET Seminar 2016 in Castellon}, booktitle = {Proceedings of the METNET Seminar 2016 in Castellon}, editor = {Virdi, Kuldeep and Tenhunen, Lauri}, address = {H{\"a}meenlinna}, isbn = {978-951-784-784-1}, pages = {19 -- 30}, language = {en} } @misc{PasternakLaunertKannengiesseretal., author = {Pasternak, Hartmut and Launert, Benjamin and Kannengießer, Thomas and Rhode, Michael}, title = {Advanced Residual Stress Assessment of Plate Girders Through Welding Simulation}, series = {Procedia Engineering}, volume = {172}, journal = {Procedia Engineering}, issn = {1877-7058}, doi = {10.1016/j.proeng.2017.02.013}, pages = {23 -- 30}, abstract = {This article provides an impression on potentials in applying nowadays welding simulation tools in construction design. This is carried out exemplary on plate girders from two structural steel grades. The calculated residual stresses are compared with measurements by sectioning method. It has been repeatedly stated that present Eurocode models fail to approximate the residual stresses. Especially for high strength steel (HSS) only limited information is available on realistic occurring residual stresses in typical I-girders. The investigations are aimed to give further guidance on these values. A few proposals on advanced models are discussed.}, language = {en} } @inproceedings{PasternakKrausche, author = {Pasternak, Hartmut and Krausche, Thomas}, title = {Design, constructions and assembly of two membrane-cladded double-curved cable net roofs}, series = {6th Structural Engineers World Congress (SEWC 2017), Cancun/Mexico}, booktitle = {6th Structural Engineers World Congress (SEWC 2017), Cancun/Mexico}, publisher = {Universidad Nacional Aut{\´o}noma de M{\´e}xico - UNAM}, pages = {8}, abstract = {For stadium roofs light weight constructions, that are tensioned between a cantilevering steel compression ring, are commonly build around the globe, mostly for social events like sport games and concerts. They allow having no columns in the viewing area and also spanning the whole arena. With the additional use of membranes as the roof shell, the inside of the building will get naturally lighted. With the knowledge of the occurring loads, an economic structure can be found to optimize the edge structure. Frequently the form finding process will use the death loads as decisive action because for only one load case a moment free form can be determined. Other load cases will cause bending in the girder. The process also allows having only supports at the low points and a cantilever arises. These types of roofs will be compared with two exemplary canopies in Germany. The main focus will be on the assembly of the edge girder, which will evoke challenges for planning as well as the actual manufacturing process. The steel edge girder is double curved and has a spatially shape. The welded box exists of 4 to 5 curving plates that have thicknesses from 15mm to 55mm and will vary in their height. Due to welding residual stresses occur during the assembly in the factory as well as on the construction side. For the design of the girders, the residual stresses need to be determined. The identified results of the residual stresses will vary through the plate thickness and will differ for residual longitudinal and residual transverse stresses. The longitudinal residual stresses, as the relevant residual stresses for axial forces, will be farther scrutinized. Due to its complex geometry the challenges of the simulation will be presented for the manufacturing process and the construction site assembly. For the farther investigation the calculated stresses will be taken for a load capacity calculation of a section of the edge girder. Due to the forming geometry and the welding process, both effects need to be considered. This calculation will also show that the edge girder needs to be stiffened in the inside with bulkhead plate's und longitudinal stiffeners. Both authors are involved in the verification of the objects (Customer Centre in the Autostadt Wolfsburg-CC, Schierke-Arena -FA in the Harz Mountains) mentioned below.}, language = {en} } @inproceedings{KrauscheLaunertPasternak, author = {Krausche, Thomas and Launert, Benjamin and Pasternak, Hartmut}, title = {Welding effects in unregularly steel box girders}, series = {6th Structural Engineers World Congress (SEWC 2017), Cancun/Mexico}, booktitle = {6th Structural Engineers World Congress (SEWC 2017), Cancun/Mexico}, publisher = {Universidad Nacional Aut{\´o}noma de M{\´e}xico - UNAM}, pages = {6}, abstract = {Several approaches on geometrical and structural imperfections are given in the literature for I sections and rectangular box girders. Those approximations of the residuals stress state can be implemented into the structural analysis using multi-purpose FEM program packages. The knowledge of the stress state of free forming cross sections has still to be determined. To fulfil a safe design, the assumptions mostly will be very conservative due to the lack of the assumed stress state. This will result directly to increased thicknesses or additional stiffening of the plates. Not only the material cost will rise, but also the fabrication costs like welding will be affected. This paper aims to provide an overview on the possibilities in the numerical prediction of weld residual stresses and weld induced deformations for cross sections with unique shapes. With the obtained values the tendencies of the residual stress state and deformations will be used to optimize the design. A representative example on a section used in a steel compression ring of a realized roof is described and analyzed using a simplification of a numerical welding simulation. The reduced simulation of the originally transient weld procedure was held to a practically reasonable level and can be reproduced for similar problems. The calculations used the Abaqus Welding Interface (AWI) to automate working steps in conjunction with the definition of weld passes and their sequencing. The field of the method that is discussed also a need of further investigations to prove its applicability. Some experimental back up is requires to verify the result quality. Nonetheless, this method could already help to show up tendencies or to identify potential critical spots in the design.}, language = {en} } @inproceedings{PasternakJaegerCanas, author = {Pasternak, Hartmut and J{\"a}ger-Ca{\~n}{\´a}s, Andreas}, title = {On the axial buckling of very thin-walled cylindrical shells}, series = {Ce/papers : the online collection for conference papers in civil engineering}, volume = {1}, booktitle = {Ce/papers : the online collection for conference papers in civil engineering}, number = {2-3}, issn = {2509-7075}, doi = {10.1002/cepa.127}, pages = {868 -- 877}, abstract = {Major advances in the buckling analysis of cylindrical shells have been achieved in the last two decades. Eurocode nowadays provides rules for tanks up to r/t = 5000. However, since only few literature has become available in the past, dealing specifically with very thin walled shells in the range between r/t = 1500 and r/t = 10000, code provisions either are quite conservative or, in case of r/t > 5000, do barely exist. Employing modern construction methods, close-to perfect, very thin-walled shells can be built that are out of the scope of the design codes. Therefore, to achieve more economical designs and a better sustainability, sophisticated design tools have to be used. In this paper, modifications and extensions of the current design procedure are proposed to overcome current limitations and drawbacks. A review of experiments with a special focus on cylinders with high r/t-ratios was conducted and modified lower bound approximation curves for the knock-down factor α deduced. They were checked against representative experiments from literature. Test results recalculated using an axisymmetric imperfection to explore their equivalent imperfection depth, proved that even small imperfections drastically reduce the buckling strength. Using a parametric study, the result range of α was extended up to r/t = 10000. The design proposal could be approved and an equation for the determination of an equivalent imperfection depth that relates the dependence of α to the imperfection depth and the r/t-ratio is proposed.}, language = {en} } @misc{GarifullinLaunertHeinisuoetal., author = {Garifullin, Marsel and Launert, Benjamin and Heinisuo, Markku and Pasternak, Hartmut and Mela, Kristo and Pajunen, Sami}, title = {Effect of welding residual stresses on local behavior of rectangular hollow section joints. Part 1 - Development of numerical model}, series = {Bauingenieur}, volume = {93}, journal = {Bauingenieur}, number = {4}, issn = {1436-4867}, pages = {152 -- 159}, abstract = {Welded tubular joints are widely used in structural engineering due to their excellent resistance and stiffness in contrast to open sections, as well as simpler end preparation. Welding residual stresses that occur in these joints after the welding process can affect their structural behavior. Some recent experimental studies have shown that this effect can be considerable. This study numerically evaluates the influence of welding residual stresses on the behavior of rectangular hollow section T joints. The paper consists of two parts. Part I develops and validates a finite element model for the joints directly taking into account welding residual stresses by means of an upstream thermomechanical simulation of the welding process. It is proven that particular attention needs to be paid to the discretization of the model, the material properties and the adequate description of the weld heat input. The validation with experimental results shows that the developed numerical model properly captures the local structural behavior of tubular joints and can be efficiently used for further investigations. Part II employs the constructed model to investigate the effect of welding residual stresses on the resistance and initial stiffness of the considered joints.}, language = {en} } @inproceedings{LedeckyCiupackPasternaketal., author = {Ledecky, Lukas and Ciupack, Yvonne and Pasternak, Hartmut and Geßler, Achim and Feldmann, Markus}, title = {Reduction of Fatigue Crack Growth Rate in Compact Tension Specimens Using Adhesively Bonded CFRP-Strips}, series = {Proceedings of the METNET Seminar 2017 in Cottbus}, booktitle = {Proceedings of the METNET Seminar 2017 in Cottbus}, editor = {Virdi, Kuldeep and Tenhunen, Lauri}, publisher = {H{\"a}me University of Applied Sciences (HAMK)}, address = {H{\"a}meenlinna}, isbn = {978-951-784-794-0}, pages = {30 -- 42}, language = {en} } @inproceedings{CiupackPasternakYilmazetal., author = {Ciupack, Yvonne and Pasternak, Hartmut and Yilmaz, Emre Mehmet and Sternsdorff, Florian and Vayas, Ioannis}, title = {Hybrid Reinforcement Measures and Innovative Measurement Methods in Steel Construction}, series = {Proceedings of the METNET Seminar 2017 in Cottbus}, booktitle = {Proceedings of the METNET Seminar 2017 in Cottbus}, editor = {Virdi, Kuldeep and Tenhunen, Lauri}, publisher = {H{\"a}me University of Applied Sciences (HAMK)}, address = {H{\"a}meenlinna}, isbn = {978-951-784-794-0}, pages = {43 -- 55}, language = {en} } @inproceedings{LiPasternak, author = {Li, Zheng and Pasternak, Hartmut}, title = {Development of a stochastic material model at constant stress distribution in steel construction}, series = {16th International Scientific Conference VSU 2016, Sofia, 2016, vol. 1}, booktitle = {16th International Scientific Conference VSU 2016, Sofia, 2016, vol. 1}, publisher = {VSU}, address = {Sofia}, pages = {193 -- 198}, abstract = {This paper briefly presents the results of theoretical and experimental investigations on the size effect in metal. The Chain of Bundle Model, which is based on a stochastic material model by Weibull and log-normal distribution, will be developed and the possibility to approximately determine the parameter ξ of the model is given. The tests were performed on specimens from the same steel with different sizes. According to the experiments, the relationship between the sizes of the specimens and the strength can be analyzed through probability- and reliability theory. The theoretical and experimental results show that if the volume increases hundredfold, the strength will be reduced to 90\% ~ 95\%. Therefore, the size effect plays an unnegligible role in steel construction.}, language = {en} } @inproceedings{SimonMoradiHildebrandetal., author = {Simon, Flaviu and Moradi, Milad and Hildebrand, J{\"o}rg and Pasternak, Hartmut}, title = {The influence of the welding sequence on the load bearing capacity and stress distribution of square hollow section steel joints}, series = {Simulationsforum 2016, Schweißen und W{\"a}rmebehandlung, Weimar, Tagungsband 08.-10. November 2016}, booktitle = {Simulationsforum 2016, Schweißen und W{\"a}rmebehandlung, Weimar, Tagungsband 08.-10. November 2016}, editor = {Hildebrand, J{\"o}rg and Loose, Tobias and Reich, Michael}, publisher = {Verein zur F{\"o}rderung der numerischen Analyse der W{\"a}rmebehandlungs- und Schweißprozesse e.V.}, address = {Weimar}, isbn = {978-3-00-054805-5}, pages = {176 -- 187}, abstract = {The aim of this contribution is to investigate the influence of welding sequencing patterns on the load bearing capacity of a S355 steel square hollow section (SHS) T-Joint. The failure and the joint behavior under loading condition are analyzed. The FE-software SYSWELD v2014 is used for the thermo-mechanical simulation of the welding process. The type of welding process used is metal active gas (MAG) welding. A fillet weld with a throat thickness of 5 mm is performed. After the welding simulation, the results in terms of stresses and distortion are validated with the experimental data. Due to the geometrical characteristics of this type of joint, a compressive test is performed. A load is applied on the upper surface the vertical member (brace). The force-displacement behavior is plotted and discussed. The differences and influencing parameters are identified. The model is prepared for the subsequent sensitivity study which will be done in the software OptiSLang, which is developed by Dynardo GmbH.}, language = {en} } @inproceedings{ShlychkovaPasternak, author = {Shlychkova, Darita and Pasternak, Hartmut}, title = {Numerical analysis of lightweight structured sandwich beams made of steel}, series = {16th International Scientific Conference VSU 2016, Sofia, 2016, vol. 1}, booktitle = {16th International Scientific Conference VSU 2016, Sofia, 2016, vol. 1}, publisher = {VSU}, address = {Sofia}, pages = {318 -- 323}, abstract = {Using a special technology it is possible to produce thin "honeycomb" structured plates. Such plates have been used e.g. for the roof of the sport complex "Olimp" in Odessa. That roof gives an extraordinary impression. That is why the question: how do structured plates behave as beams with C-section under concentrated force in the middle of the upper flange? In an ongoing project, two of those structured plates were assembled in different ways trough point welding. "Sandwich" beams were modelled and calculated using the nonlinear finite elements. Using Abaqus software load deformation curves for each beam and local stability were analyzed. Those sandwich beams may be used in exhibition stand construction.}, language = {en} } @inproceedings{LedeckyCiupackPasternaketal., author = {Ledecky, Lukas and Ciupack, Yvonne and Pasternak, Hartmut and Fischer, Vitali and Stammen, Elisabeth and Dilger, Klaus}, title = {Untersuchungen zum Tragverhalten und der Lebensdauer von Klebverbindungen im Stahlbau unter zyklischen Belastungen (LebKleb)}, series = {17. Kolloquium Gemeinsame Forschung in der Klebtechnik, Tagungsband, 14. - 15. Februar 2017}, booktitle = {17. Kolloquium Gemeinsame Forschung in der Klebtechnik, Tagungsband, 14. - 15. Februar 2017}, publisher = {DECHEMA}, address = {Frankfurt am Main}, pages = {37 -- 38}, language = {de} } @inproceedings{LedeckyCiupackPasternaketal., author = {Ledecky, Lukas and Ciupack, Yvonne and Pasternak, Hartmut and Mette, Christoph and Stammen, Elisabeth and Dilger, Klaus}, title = {Untersuchungen zum Tragverhalten und der Lebensdauer von Klebverbindungen im Stahlbau unter zyklischen Belastungen (LebKleb)}, series = {16. Kolloquium Gemeinsame Forschung in der Klebtechnik, K{\"o}ln, 2016}, booktitle = {16. Kolloquium Gemeinsame Forschung in der Klebtechnik, K{\"o}ln, 2016}, publisher = {DECHEMA}, address = {Frankfurt am Main}, pages = {39 -- 41}, language = {de} } @misc{CiupackPasternakMetteetal., author = {Ciupack, Yvonne and Pasternak, Hartmut and Mette, Christoph and Stammen, Elisabeth and Dilger, Klaus}, title = {Adhesive bonding in steel construction - Challenge and innovation}, series = {Procedia Engineering}, volume = {172}, journal = {Procedia Engineering}, issn = {1877-7058}, doi = {10.1016/j.proeng.2017.02.048}, pages = {186 -- 193}, language = {en} } @misc{StojkovićFolićPasternak, author = {Stojković, Nenad and Folić, Radomir and Pasternak, Hartmut}, title = {Mathematical model for the prediction of strength degradation of composites subjected to constant amplitude fatigue}, series = {International Journal of Fatigue}, volume = {103}, journal = {International Journal of Fatigue}, issn = {0142-1123}, doi = {10.1016/j.ijfatigue.2017.06.032}, pages = {478 -- 487}, language = {en} } @techreport{LaunertPasternakRhodeetal., author = {Launert, Benjamin and Pasternak, Hartmut and Rhode, Michael and Kromm, Arne and Kannengießer, Thomas}, title = {Erh{\"o}hung der Tragf{\"a}higkeit geschweißter I-Tr{\"a}ger aus hochfestem Baustahl durch verbesserte Ans{\"a}tze zur Ber{\"u}cksichtigung von Eigenspannungen}, pages = {4}, language = {de} } @misc{LaunertPasternak, author = {Launert, Benjamin and Pasternak, Hartmut}, title = {Weld residual stresses effects in the design of welded plate girders: Simulation and Implementation}, series = {Ce/papers}, volume = {1}, journal = {Ce/papers}, number = {2-3}, issn = {2509-7075}, doi = {10.1002/cepa.144}, pages = {1039 -- 1047}, abstract = {Eurocode 3 offers different possibilities on a numerically-aided design of welded plate girders. In this, a geometrically and materially nonlinear analysis of the imperfect structure (GMNIA) provides the theoretically highest possible degree of realism. A correct implementation of "imperfections" is of critical importance in the practical application of this method. The current design rules are based on long term experience in terms of traditional ("old") welding procedures and regular ("low strength") steel grades. Thus, they provide very approximate (but safe) rules for these structures. With the introduction of modern shop welding operations and materials, many of these assumptions seem to be over-conservative. A revision of these rules is being processed in different national and international research projects. This particular study focusses on the weld residual stresses and their effects in conventional steel S355 and high strength steel S690. Metal active gas (MAG) welding under shop welding conditions was used. The measurement of weld residual stresses on component-like samples (carried out by the BAM Bundesanstalt f{\"u}r Materialforschung und -pr{\"u}fung in Berlin) has been widely published. The hereupon based (simplified) welding simulation as part of a subsequent structural analysis is shown here. A novel numerical approach how to directly incorporate the results into large structural components models is presented. The capacity analysis is performed on a simple example for weak-axis buckling. The results indicate significant improvements in the utilization of load-bearing capacity and underline the superior buckling assignment for the S690 compared to conventional S355. The experimental validation of the findings is currently being prepared.}, language = {en} } @misc{KrauscheLaunertPasternak, author = {Krausche, Thomas and Launert, Benjamin and Pasternak, Hartmut}, title = {A study on the prediction of welding effects in steel box girders}, series = {Ce/papers}, volume = {1}, journal = {Ce/papers}, number = {2-3}, issn = {2509-7075}, doi = {10.1002/cepa.500}, pages = {4410 -- 4416}, abstract = {For standard sections including I-girders and rectangular box girders, several approaches on geometrical and structural imperfections are given in the literature, which can be implemented in a numerical analysis. For complex sections, as found in many of today's lightweight roof structures, these assumptions are conservative due to the sections typically unique shape, which leads to increased thicknesses or additional stiffening of the plates. This, on the other hand, can significantly affect fabrication costs. This paper aims to provide an overview on the possibilities in the numerical prediction of weld residual stresses and weld-induced deformations for these sections. The obtained values can be used in a subsequent numerical analysis to understand the structural behavior and optimize the design. A representative example on a section used in a steel compression ring is described and analyzed using the numerical welding simulation. A simplification of the originally transient weld procedure is used in order to reduce computation times to a practically reasonable level. In this context, the Abaqus Welding Interface (AWI) helps to automate working steps in conjunction with the definition of weld passes and their sequencing, which shall be shown in here. The applicability of this method is discussed showing also a need of further investigations in this field. This is especially with regard to result quality, which requires some experimental back-up. Nonetheless, this method could already help to show up tendencies or to identify potential critical spots in the design.}, language = {en} } @misc{CiupackLedeckyPasternaketal., author = {Ciupack, Yvonne and Ledeck{\´y}, Luk{\´a}š and Pasternak, Hartmut and Fischer, Vitali and Stammen, Elisabeth and Dilger, Klaus}, title = {Bonded steel joints under cyclic loading: Study on structural behaviour and fatigue}, series = {ce/papers}, volume = {1}, journal = {ce/papers}, number = {2/3}, issn = {2509-7075}, doi = {10.1002/cepa.87}, pages = {505 -- 513}, language = {en} } @inproceedings{LiPasternak, author = {Li, Zheng and Pasternak, Hartmut}, title = {Reliability analysis of size effect on flexural members with stochastic finite element method}, series = {12th International Conference on Structural Safety \& Reliability, Vienna, Austria, 6-10 August 2017}, booktitle = {12th International Conference on Structural Safety \& Reliability, Vienna, Austria, 6-10 August 2017}, editor = {Bucher, Christian and Ellingwood, Bruce R. and Frangopol, Dan M.}, publisher = {TU-MV Media Verlag}, address = {Vienna}, isbn = {978-3-903024-28-1}, language = {en} } @inproceedings{StapelfeldLaunertPasternaketal., author = {Stapelfeld, Christoph and Launert, Benjamin and Pasternak, Hartmut and Doynov, Nikolay and Michailov, Vesselin}, title = {Numerische Festigkeitsberechnung einer versteiften Struktur unter Ber{\"u}cksichtigung realit{\"a}tsnaher geometrischer und struktureller Imperfektionen}, series = {110 Jahre DASt und 21. DASt-Forschungskolloquium an der Technischen Universit{\"a}t Kaiserslautern, 6./7. M{\"a}rz 2018}, booktitle = {110 Jahre DASt und 21. DASt-Forschungskolloquium an der Technischen Universit{\"a}t Kaiserslautern, 6./7. M{\"a}rz 2018}, publisher = {Deutscher Ausschuß f{\"u}r Stahlbau DASt}, address = {D{\"u}sseldorf}, isbn = {978-3-941687-27-1}, pages = {245 -- 249}, abstract = {Die Festigkeitsberechnung von Strukturen, zum Beispiel Platten oder Schalen, mittels der Finite-Elemente-Methode geh{\"o}rt schon seit l{\"a}ngerem zum Stand der Technik. Ber{\"u}cksichtigt werden bei der Berechnung sowohl geometrische Nichtlinearit{\"a}ten als auch das nichtlineare Verhalten des Werkstoffs. Die geometrischen und strukturellen Imperfektionen werden bei der Ermittlung der Festigkeit zumeist in ausschließlich geometrischen Imperfektionen, wie bspw. Kombinationen aus Fertigungstoleranzen und den Ergebnissen von Beulanalysen zusammengefasst. Zur Rechtfertigung dieser Vorgehensweise werden die geometrischen Imperfektionen gem{\"a}ß DIN EN 1993-1-5 erh{\"o}ht. In einem Kommentar zur selben Norm findet sich ebenfalls eine Empfehlung zur Ber{\"u}cksichtigung von Schweißimperfektionen in Form von vereinfachten L{\"a}ngseigenspannungsverl{\"a}ufen. Diese werden in Abh{\"a}ngigkeit der Fließgrenzspannung des Werkstoffs bei Raumtemperatur und der Dicken der F{\"u}gepartner angenommen. Sowohl die Annahme rein geometrischer Imperfektionen als auch die Ber{\"u}cksichtigung vereinfachter Eigenspannungszust{\"a}nde, sind mit Sicherheitszuschl{\"a}gen behaftet. Durch eine realit{\"a}tsn{\"a}here Ber{\"u}cksichtigung von strukturellen und geometrischen Imperfektionen, hervorgerufen durch Schweißprozesse, kann die tats{\"a}chliche Tragf{\"a}higkeit einer Struktur wesentlich exakter bestimmt werden. Inhalt dieses Artikels ist die Anwendung eines analytisch-numerischen Hybridmodells zur Schweißimperfektionsberechnung an einer doppelt versteiften Platte und einer anschließenden Festigkeitsanalyse. Eingangs wird das analytische Modell vorgestellt und auf die grundlegenden physikalischen Zusammenh{\"a}nge eingegangen. Es folgt die Erl{\"a}uterung des Kopplungsalgorithmus zwischen analytischem Modell und der numerischen Berechnung. Angewendet an der doppelt versteiften Platte, wird ein realit{\"a}tsnaher geometrischer und struktureller Imperfektionszustand berechnet. Eine anschließende Traglastanalyse gibt Aufschluss {\"u}ber das Verformungsverhalten unter achsialer Krafteinwirkung. Zur Bewertung der Ergebnisse wird ein Modell gleicher geometrischer Abmessungen und Werkstoffkennwerte aus der Literatur herangezogen. Berechnet wurden die ersten 6 Eigenformen mittels analytischer und numerischer Modelle sowie die Last-Verformungskurven unter der Annahme unterschiedlicher geometrischer Imperfektionen. Um die Vergleichbarkeit der Ergebnisse zu sichern, wird eingangs die Lagerung des Modells sowie der Kraftangriffspunkt in L{\"a}ngsrichtung invers, durch den Vergleich der ersten 6 Beulformen sowie der Last-Verformungskurven dreier Imperfektionen, bestimmt. Darauf aufbauen wird die Last-Verformungskurve f{\"u}r einen {\"u}berlagerten Imperfektionszustand berechnet, wobei die geometrischen Imperfektionen aus den Fertigungstoleranzen abgeleitet und die strukturellen idealisiert, gem{\"a}ß DIN EN 1993-1-5, gew{\"a}hlt werden. Abschließend werden alle Last-Verformungskurven einander gegen{\"u}bergestellt. Anhand des Vergleichs kann quantifiziert werden, wie konservativ die einzelnen angenommenen Imperfektionen sind und wie sich der Verformungsverlauf darstellt, berechnet man diesen unter Verwendung realit{\"a}tsnaher geometrischer und struktureller Imperfektionen.}, language = {de} } @inproceedings{JaegerCanasPasternak, author = {J{\"a}ger-Ca{\~n}{\´a}s, Andreas and Pasternak, Hartmut}, title = {Zum Tragverhalten ringversteifter Schalen unter Axialdruck}, series = {110 Jahre DASt und 21. DASt-Forschungskolloquium an der Technischen Universit{\"a}t Kaiserslautern, 6./7. M{\"a}rz 2018}, booktitle = {110 Jahre DASt und 21. DASt-Forschungskolloquium an der Technischen Universit{\"a}t Kaiserslautern, 6./7. M{\"a}rz 2018}, publisher = {Deutscher Ausschuß f{\"u}r Stahlbau DASt}, address = {D{\"u}sseldorf}, isbn = {978-3-941687-27-1}, pages = {227 -- 232}, abstract = {Ringsteifen werden typischerweise bei d{\"u}nnwandigen Tanks am Mantel befestigt, um auch f{\"u}r starken Wind und/oder Unterdruck eine ausreichende Beulsicherheit sicherzustellen. Eine Vielzahl an Ver{\"o}ffentlichungen zum Thema Ringsteifen besch{\"a}ftigt sich ausschließlich mit den vorher genannten Lastf{\"a}llen. Dagegen ist der traglaststeigernde Einfluss der Ringsteifen im Lastfall Axialdruck kaum erforscht. Experimentell wurde vor allem in den 1960er und 1970er Jahren gegen{\"u}ber unversteiften Schalen, f{\"u}r eng-ringversteifte ein erheblich verbessertes Tragverhalten nachgewiesen. Der eingeschr{\"a}nkte Parameterbereich der Untersuchungen verhindert jedoch die Anwendung der Erkenntnisse im Metallbau, wo, aufgrund der Fertigungskosten, eher wenige, daf{\"u}r kr{\"a}ftigere Ringsteifen eingesetzt werden. Der Beitrag baut auf den experimentellen Studien als Grundlage auf und erweitert die Erkenntnisse mittels numerischer Parameterstudien von eng-ringversteiften Schalen auf Kreiszylinder mit Steifenabst{\"a}nden bis zum Zehnfachen der klassischen Beulhalbwellenl{\"a}nge 1.73√rt. Es wird gezeigt, dass auch mit versteiften Schalen, bei denen der Steifenabstand gr{\"o}ßer als zwei Beulhalbwellenl{\"a}ngen ist, noch Tragf{\"a}higkeitssteigerungen gegen{\"u}ber der unversteiften Schale erreicht werden k{\"o}nnen. Erwartungsgem{\"a}ß sind die Zugewinne an Traglast bei enger versteiften Kreiszylindern am gr{\"o}ßten, wobei vor allem d{\"u}nnwandige Strukturen von der verringerten Imperfektionssensitivit{\"a}t profitieren. Die Ergebnisse, angewandt auf die Baupraxis, erlauben eine wirtschaftlichere Bemessung von Tanks und Silos mit Ringsteifen, sofern Axialdruck eine bemessungsrelevante Lastsituation darstellt. Dies ist in der Regel bei {\"u}berdachten Silos und windbelasteten Flachbodentanks der Fall. Daf{\"u}r ist kein zus{\"a}tzlicher Konstruktionsaufwand notwendig, da lediglich die ohnehin vorhandene Struktur vorteilhafter ausgenutzt wird.}, language = {de} } @misc{PartovPasternakPetkovetal., author = {Partov, Doncho and Pasternak, Hartmut and Petkov, Milen and Nikolov, Radoslav and Dimitrova, Antoaneta}, title = {About the history of orthotropic bridge decks}, series = {Annual of the University of Architecture, Civil Engineering and Geodesy, Sofia}, volume = {51}, journal = {Annual of the University of Architecture, Civil Engineering and Geodesy, Sofia}, number = {4}, issn = {1310-814X}, pages = {295 -- 311}, abstract = {Тhe development of steel bridges after the WWII is characterized by new constructive forms like: steel roadway closed sections, new static systems considering the roadway as a plate rather than a beam grid, new computational methods covering rod statics and statics of continuum, and determining the internal forces of the roadway as internal forces of an orthotropic plate. Moreover, the main girders, the roadway and the horizontal links connect statically and constructively in a whole monolithic structure. Thus, the construction follows better the real distribution of internal forces in steel structure. Loading possibility of high-quality steel material is well used, by which the economic effect of the construction increases significantly compared to the riveted old bridges. The application of this theory in Bulgaria in the period 1976 - 1992 allowed the Bulgarian bridge construction to build several unique by their size steel road bridges of steel orthotropic decks.}, language = {en} } @misc{GarifullinLaunertHeinisuoetal., author = {Garifullin, Marsel and Launert, Benjamin and Heinisuo, Markku and Pasternak, Hartmut and Mela, Kristo and Pajunen, Sami}, title = {Effect of welding residual stresses on local behavior of rectangular hollow section joints. Part 2 - Parametric studies}, series = {Bauingenieur}, volume = {93}, journal = {Bauingenieur}, number = {5}, issn = {1436-4867}, pages = {207 -- 213}, abstract = {Welding residual stresses that occur in tubular joints after the welding process affect their structural behavior. To ensure that these stresses do not negatively act on the load-bearing capacity of joints, their influence should be carefully investigated. This paper represents the second part of a study that numerically evaluates the structural behavior of rectangular hollow section T joints taking into account welding residual stresses. The finite element model developed in Part 1 is now used to evaluate their effect on the resistance and initial stiffness of tubular joints. The conducted parametric analyses show that welding residual stresses have a positive influence of 1-19 \% on the plastic resistance of tubular joints and insignificantly reduce their initial stiffness. At the same time, the behavior of the considered joints is found not to depend on the welding sequence.}, language = {en} } @misc{LiLaunertPasternak, author = {Li, Zheng and Launert, Benjamin and Pasternak, Hartmut}, title = {Application of the stochastic finite element method in welding simulation}, series = {Welding in the World}, volume = {62}, journal = {Welding in the World}, number = {5}, issn = {0043-2288}, doi = {10.1007/s40194-018-0596-4}, pages = {905 -- 912}, abstract = {Due to the uncertain microscopic structure of the material, the strength of the material exhibits strong randomness. This randomness results in uncertain response of the structure in the sequentially coupled thermal-mechanical analysis by welding simulation. Because of the limitations of deterministic welding simulation, the stochastic finite element method with random field will be introduced into the welding simulation, so that the welded structure can be more accurately calculated in the stability and reliability structural analysis. Particularly, it is necessary to propose reasonable distributions of residual stress from welding simulations based on statistical and reliability theories. This paper is intended to implement the stochastic finite element method in the welding simulation using a general-purpose simulation program and to demonstrate the potential of the proposed approach. Furthermore, the statistical distribution function of the welding simulation response is obtained by maximum entropy fitting method. Then, a numerical example is presented by the proposed method.}, language = {en} } @misc{StapelfeldLaunertPasternaketal., author = {Stapelfeld, Christoph and Launert, Benjamin and Pasternak, Hartmut and Doynov, Nikolay and Michailov, Vesselin}, title = {Traglastberechnung versteifter Platten und Schalen unter Ber{\"u}cksichtigung realer Schweißimperfektionen}, series = {Bauingenieur}, volume = {93}, journal = {Bauingenieur}, number = {10}, issn = {0005-6650}, pages = {403 -- 411}, abstract = {Imperfektionen, die bei Traglastberechnungen Ber{\"u}cksichtigung finden m{\"u}ssen, haben ihre Ursachen in Herstellungs- und Fertigungstoleranzen oder werden durch das Schweißen und den damit zumeist einhergehenden Nachbehandlungen in den Bauteilen hervorgerufen. Durch die W{\"a}rmewirkung des Schweißens entstehen sowohl sehr große Verformungen als auch signifikante Zug und Druckspannungen. Der strukturelle und geometrische Imperfektionsgrad wird somit maßgeblich von der Anzahl und der Lage der Schweißn{\"a}hte sowie den Schweißparametern bestimmt. F{\"u}r die Ber{\"u}cksichtigung in Traglastberechnungen ist ein physikalisch fundiertes Modell erforderlich, welches die Schweißimperfektionen schnell und pr{\"a}zise berechnet. Das gekoppelte analytisch numerische Hybridmodell erf{\"u}llt diese Kriterien. Die mathematischen Grundlagen des analytischen Modells sowie die Kopplung mit der numerischen Finite-Elemente-Berechnung werden eingangs vorgestellt und die Anwendung zur Berechnung von Verz{\"u}gen an einer Schiffsektion demonstriert. Darauffolgend wird das Hybridmodell an einer eben und einer gekr{\"u}mmten versteiften Platte zur Berechnung der Schweißimperfektionen angewendet. Anschließende Traglastberechnungen sowie der Vergleich mit den Ergebnissen unter der Annahme einer geometrischen Ersatzimperfektion in Form des kritischsten Eigenwerts gibt Auskunft dar{\"u}ber, welches Potenzial die realit{\"a}tsnahe direkte Ber{\"u}cksichtigung von Schweißimperfektionen birgt.}, language = {de} } @misc{MoradiPasternak, author = {Moradi, Milad and Pasternak, Hartmut}, title = {A Study on the Influence of Various Welding Sequence Schemes on the Gain in Strength of Square Hollow Section Steel T-Joint}, series = {Journal of Welding and Joining}, volume = {35}, journal = {Journal of Welding and Joining}, number = {4}, issn = {2466-2232}, doi = {10.5781/JWJ.2017.35.4.7}, pages = {41 -- 50}, language = {en} } @misc{CiupackPasternak, author = {Ciupack, Yvonne and Pasternak, Hartmut}, title = {Some Remarks about the New Generation of prEN 1993-1-1}, series = {27th Annual International Conference on Composites / Nano Engineering ICCE-27}, journal = {27th Annual International Conference on Composites / Nano Engineering ICCE-27}, pages = {3}, language = {en} } @misc{DoynovStapelfeldMichailovetal., author = {Doynov, Nikolay and Stapelfeld, Christoph and Michailov, Vesselin and Pasternak, Hartmut and Launert, Benjamin}, title = {Distortion analysis of large scaled welded structures}, series = {Mathematical Modelling of Weld Phenomena 12 : selected peer reviewed papers from the 12th International Seminar Numerical Analysis of Weldability : September 23-26, 2018, Graz, Schloss Seggau - Austria}, journal = {Mathematical Modelling of Weld Phenomena 12 : selected peer reviewed papers from the 12th International Seminar Numerical Analysis of Weldability : September 23-26, 2018, Graz, Schloss Seggau - Austria}, editor = {Sommitsch, Christof and Enzinger, Norbert and Mayr, Peter}, publisher = {Verlag der Technischen Universit{\"a}t Graz}, address = {Graz}, isbn = {978-3-85125-615-4}, doi = {10.3217/978-3-85125-615-4}, pages = {254 -- 280}, abstract = {The work presents an innovative approach for simulation of welding induced distortions, which allows taking into consideration the local effects of the welding process as well as the global interactions in the structure. The approach bases on an integration of analytical and numerical calculation's procedures in a hybrid model, realized with the aid of the inherent strain concept. The analytical procedure calculates the shrinkage strain components and area of the plastic deformed zone, caused by welding. The calculated strains are then transferred to the global finite element model in order to predict the distortions and stresses in the structure after every welding stage, as well as their final state. The consideration of welding scenarios, weld sequence, clamping conditions and the assembling stages is done by taking into account the intermediate variation of the strain state during the manufacturing steps. The article gives the theoretical basis of the analytical model. The consideration of the essential physical relations is put into discussion. The application of the model is illustrated on complex structures. Its reliability and practicability are demonstrated by means of a validation study.}, language = {en} } @misc{ShoushtarianMofradShlychkovaCiupacketal., author = {Shoushtarian Mofrad, Ashkan and Shlychkova, Darita and Ciupack, Yvonne and Pasternak, Hartmut}, title = {FE Modelling of Sandwich Panels with Screwed Joint at Elevated Temperatures}, series = {XVIII ANNIVERSARY INTERNATIONAL SCIENTIFIC CONFERENCE BY CONSTRUCTION AND ARCHITECTURE VSU'2018, At Sofia, Bulgaria}, journal = {XVIII ANNIVERSARY INTERNATIONAL SCIENTIFIC CONFERENCE BY CONSTRUCTION AND ARCHITECTURE VSU'2018, At Sofia, Bulgaria}, pages = {6}, abstract = {Understanding and predicting sandwich structure behavior in fire has been of particular interest to researchers for a long time. Sandwich panel joints are playing an important role since they not only connect sandwiches to a bearing structure, but also play a key role in stabilization of the whole building. This paper presents an investigation of a sandwich panel behavior. The sandwich panel consist of two steel layers and PIR core between them and is connected to a HEA 160 flange with the help of a screw. Using ABAQUS software, this connection is modelled and deformation fields with temperature distribution area are analyzed. The modelling process includes many stages associated with each other: static, heat transfer and sequential analysis that includes both previous analyses.}, language = {en} } @misc{ShlychkovaPasternak, author = {Shlychkova, Darita and Pasternak, Hartmut}, title = {Numerical analysis and laboratory experiments of lightweight structured sandwich beams made of steel}, series = {Proceedings VII International Scientific Conference VSU 2017, 8-9 Juni 2017, Sofia, Bulgaria}, volume = {Volume 1}, journal = {Proceedings VII International Scientific Conference VSU 2017, 8-9 Juni 2017, Sofia, Bulgaria}, address = {Sofia, Bulgaria}, issn = {1314-071X}, pages = {252 -- 260}, abstract = {Using special technology it is possible to produce thin steel plates with a 3-D structure - hexagonal staggered pattern. Such sheets find a range of application in automotive and aerospace industry. The question is: Can we use those sheets also for building applications? Therefore their behaviour under external loads has to be studied. As an example beams with C-section made of structured sheets under concentrated force in the middle of the upper flange are investigated. This article provides information about load capacity of beams, assembled from structured plates with different thickness. Using Abaqus software beams were modelled and deformation fields for each of them were analyzed. To compare computer calculations with actual results, real sized beams made of structured sheets were constructed in laboratory and bending tests were conducted.}, language = {en} } @misc{LoebjinskiRugPasternak, author = {Loebjinski, Maria and Rug, Wolfgang and Pasternak, Hartmut}, title = {The influence of an improved strength grading in situ on modelling timber strength properties}, series = {Proceedings of the International Conference on Structural Health Assessment of Timber Structures, SHATiS´2019}, journal = {Proceedings of the International Conference on Structural Health Assessment of Timber Structures, SHATiS´2019}, publisher = {Universidade do Minho Departamento de Engenharia Civi}, address = {Guimar{\~a}es, Portugal}, isbn = {978-989-54496-2-0}, pages = {619 -- 628}, language = {en} } @misc{LoebjinskiLinkeRugetal., author = {Loebjinski, Maria and Linke, Gunter and Rug, Wolfgang and Pasternak, Hartmut}, title = {Redevelopment of a wooden roof construction under preservation order}, series = {Proceedings of the International Conference on Structural Health Assessment of Timber Structures, SHATiS´2019}, journal = {Proceedings of the International Conference on Structural Health Assessment of Timber Structures, SHATiS´2019}, publisher = {Universidade do Minho Departamento de Engenharia Civi}, address = {Guimar{\~a}es, Portugal}, isbn = {978-989-54496-2-0}, pages = {912 -- 921}, language = {en} } @misc{SternsdorffCiupackYilmazetal., author = {Sternsdorff, Florian and Ciupack, Yvonne and Yilmaz, Emre Mehmet and Pasternak, Hartmut and Vayas, Ioannis}, title = {Investigations on beam-to-column connections reinforced with adhesively bonded CFRP lamellas}, series = {7th International Conference Civil Engineering - Science and Practice (GNP), Kolašin, 10.-14. March 2020, Book of abstracts}, journal = {7th International Conference Civil Engineering - Science and Practice (GNP), Kolašin, 10.-14. March 2020, Book of abstracts}, pages = {8}, abstract = {Against the background of the earthquake-proof design of steel structures, it makes sense to use structures with sufficient ductility and energy dissipation capacity. The joints are often a weak point in such systems. Methods for reinforcing beam-to-column connections with the aid of adhesively bonded CFRP products are the subject of the work. Advantages of such reinforcement methods are the avoidance of residual stresses (compared to welded steel lamellas), avoidance of cross-sectional weakening (in comparison to bolted solutions) and, above all, the possibility of retrofitting existing steel structures.}, language = {en} } @misc{ShoushtarianMofradShlychkovaCiupacketal., author = {Shoushtarian Mofrad, Ashkan and Shlychkova, Darita and Ciupack, Yvonne and Pasternak, Hartmut}, title = {Study of Bending, Translational and Torsional Stiffness of Sandwich Panels in Fire}, series = {7th International Conference Civil Engineering - Science and Practice (GNP), Kolašin, 10-14 March 2020, Book of abstracts}, journal = {7th International Conference Civil Engineering - Science and Practice (GNP), Kolašin, 10-14 March 2020, Book of abstracts}, pages = {8}, language = {en} } @misc{PasternakCiupack, author = {Pasternak, Hartmut and Ciupack, Yvonne}, title = {Use of CFRP for the Rehabilitation of Fatigue Damaged Steel Structures - Only a Nice Idea?}, series = {XX International Scientific Conference VSU'2020 on Construction and Architecture Book of Abstracts}, journal = {XX International Scientific Conference VSU'2020 on Construction and Architecture Book of Abstracts}, editor = {Georgiev, Vanyo and Stoynova, Iliana}, issn = {1314-071X}, pages = {9}, language = {en} } @inproceedings{StapelfeldLaunertPasternaketal., author = {Stapelfeld, Christoph and Launert, Benjamin and Pasternak, Hartmut and Doynov, Nikolay and Michailov, Vesselin}, title = {The Influence of Geometrical and Welding Imperfections on the Strength of Stiffened Structures}, series = {High Performance Steel Structures Research Council (HPSSRC), Delft, Netherlands, 2018}, booktitle = {High Performance Steel Structures Research Council (HPSSRC), Delft, Netherlands, 2018}, pages = {191 -- 201}, abstract = {The strength calculation of stiffened plates and shells via finite element simulation has been part of the state of the art for a long time. Geometrical nonlinearities as well as the nonlinear material behavior are considered within the calculation. To simplify, both types of imperfections, geometrical and structural ones, are mostly combined in these strength calculations being considered as equivalent geometrical imperfections. Values for standard cases are included in EN 1993-1-5 in case of plated structures or 1-6 in case of shells. A second possibility is the separate definition of fabrication tolerances and residual stresses, as far as they are known. With increasing complexity of the structure, less information are however available on geometrical and particularly structural imperfections. Nevertheless, by means of a more realistic consideration of these values, the actual ultimate load can be determined significantly more exactly and the performance of high performance steel structures is increased. In the investigated cases, deformations and stresses arise mainly due to welding. Therefore, the topic of this article is the application of an analytical numerical hybrid model for predicting imperfections induced by welds. This is presented on an example of a stiffened steel structure and a subsequent ultimate load calculation. At the beginning the analytical model, its physical basis as well as the physical interrelationships are introduced and explained. This is followed by the explanation of the coupling procedure between the analytical model and the numerical calculation for the calculation of weld-induced deformations and residual stresses. The significance of the hybrid model is proven by means of a few sample applications. For a realistic determination of the weld imperfections in the investigated stiffened structure, the coupled hybrid model is used afterwards. An ultimate load analysis gives information about the load carrying behavior under axial loading. The results are compared with the results of an ultimate load analysis from a literature example assuming different eigenvalues with different scaling. The results underline the potential additional utilization of load bearing capacity by this new approach.}, language = {en} } @inproceedings{LiPasternakPartov, author = {Li, Zheng and Pasternak, Hartmut and Partov, Doncho}, title = {Influence of statistical size effect in steel on structural safety}, series = {Proceedings of 16th International Conference on New Trends in Statics and Dynamics of Buildings}, booktitle = {Proceedings of 16th International Conference on New Trends in Statics and Dynamics of Buildings}, editor = {Jendželovsk{\´y}, Norbert and Grmanov{\´a}, Alžbeta}, publisher = {Slovak University of Technology}, address = {Bratislava}, isbn = {978-80-227-4845-2}, abstract = {This paper present the investigation of the statistical size effect in steel structure and the corresponding reliability. This study described the randomness of material properties through two different ways. These two proposed simulation methods, which are an extension and supplement to traditional simulation methods, can effectively simulate the statistical size effect for the tensile and flexural components in steel structures. The test results show that the variations of the yield and tensile strength increase with the decreasing specimen volume. Besides, the structural component strength is not only related to the specimen volume, but also the stress distribution. It is found by studying the influence of statistical size effect on structural reliability that the strength, which is obtained by small specimens through statistical analysis in the laboratory, is no more accurately applicable to large construction. The core idea is that the stochastic material proper-ties are directly embedded in mechanical calculations to develop a more accurate and economical design method for steel structure.}, language = {en} } @inproceedings{PartovPasternakGrekovetal., author = {Partov, Doncho and Pasternak, Hartmut and Grekov, Petar and Nikolov, Radoslav and Dimitrova, Antoaneta}, title = {About the Theory of Orthotropic Steel Plate Established by Wilhelm Cornelius and its Application for Analysis of Two Steel Bridges With Orthotropic Decks in Varna}, series = {X Jubilee International Scientific Conference „Civil Engineering Design and Construction", Sept. 20-22, 2018, Varna, Bulgaria}, booktitle = {X Jubilee International Scientific Conference „Civil Engineering Design and Construction", Sept. 20-22, 2018, Varna, Bulgaria}, pages = {469 -- 481}, language = {en} } @inproceedings{LoebjinskiKoehlerRugetal., author = {Loebjinski, Maria and K{\"o}hler, Jochen and Rug, Wolfgang and Pasternak, Hartmut}, title = {Development of an optimization-based and practice orientated assessment scheme for the evaluation of existing timber structures}, series = {Life-Cycle Analysis and Assessment in Civil Engineering: Towards an Integrated Vision}, booktitle = {Life-Cycle Analysis and Assessment in Civil Engineering: Towards an Integrated Vision}, editor = {Caspeele, Robby and Taerwe, Luc and Frangopol, Dan M.}, publisher = {Taylor \& Francis Group}, address = {London}, isbn = {978-1-138-62633-1}, pages = {353 -- 360}, language = {en} } @inproceedings{LedeckyCiupackPasternaketal., author = {Ledecky, Lukas and Ciupack, Yvonne and Pasternak, Hartmut and Geßler, Achim and Feldmann, Markus and Kasper, Yann and Albiez, Matthias and Ummenhofer, Thomas}, title = {Untersuchungen zur Erm{\"u}dungsrisssanierung mit aufgeklebten CFK-Lamellen im Stahlbau}, series = {110 Jahre DASt und 21. DASt-Forschungskolloquium an der Technischen Universit{\"a}t Kaiserslautern}, booktitle = {110 Jahre DASt und 21. DASt-Forschungskolloquium an der Technischen Universit{\"a}t Kaiserslautern}, publisher = {Deutscher Ausschuß f{\"u}r Stahlbau DASt}, address = {D{\"u}sseldorf}, isbn = {978-3-941687-27-1}, pages = {116 -- 121}, language = {de} } @inproceedings{ZivaljevicLuxorPasternak, author = {Zivaljevic-Luxor, Natasa and Pasternak, Hartmut}, title = {Roofs for archaeological sites integration into public space of metropolitan area}, series = {International Scientific Conference, Nis, Serbia, 31.08-01-09.2018}, booktitle = {International Scientific Conference, Nis, Serbia, 31.08-01-09.2018}, pages = {10}, language = {en} } @inproceedings{JaegerCanasPasternak, author = {J{\"a}ger-Ca{\~n}{\´a}s, Andreas and Pasternak, Hartmut}, title = {On the buckling behavior of ring-stiffened shells under axial compression}, series = {8th International Conference on Thin-Walled Structures, ICTWS 2018, Lisbon, Portugal, July 24-27, 2018}, booktitle = {8th International Conference on Thin-Walled Structures, ICTWS 2018, Lisbon, Portugal, July 24-27, 2018}, pages = {13}, language = {en} } @inproceedings{StapelfeldLaunertPasternaketal., author = {Stapelfeld, Christoph and Launert, Benjamin and Pasternak, Hartmut and Doynov, Nikolay and Michailov, Vesselin}, title = {Strength Calculation of Stiffened Structures Taking Into Consideration Realistic Weld Imperfections}, series = {European Conference on Residual Stresses 2018, ECRS-10, Leuven, Belgium, 11-14th September, 2018}, booktitle = {European Conference on Residual Stresses 2018, ECRS-10, Leuven, Belgium, 11-14th September, 2018}, editor = {Seefeldt, Marc}, publisher = {Materials Research Forum LLC}, address = {Millersville, PA}, isbn = {978-1-945291-88-3}, doi = {10.21741/9781945291890-39}, pages = {245 -- 250}, abstract = {The topic of this article is the application of an analytical numerical hybrid model for a realistic prediction of imperfections induced by welds. At the beginning, the analytical model, its physical basis as well as the physical interrelationships are explained. This is followed by the explanation of the coupling procedure between the analytical model and the numerical calculation. Afterwards, the coupled hybrid model is applied on the investigated stiffened curved structure for the determination of the weld imperfections. An ultimate load analysis gives information about the load carrying behavior under axial loading. The results are compared against the traditional approach using eigenmode-based imperfections. The comparison underlines the potential additional utilization of load bearing capacity by this new approach.}, language = {en} } @inproceedings{LoebjinskiRugPasternak, author = {Loebjinski, Maria and Rug, Wolfgang and Pasternak, Hartmut}, title = {Possibilities for a modification of partial safety factors for existing timber structures}, series = {World Conference on Timber Engineering, Seoul, 20 - 23 Aug 2018}, booktitle = {World Conference on Timber Engineering, Seoul, 20 - 23 Aug 2018}, pages = {7}, language = {en} } @misc{WangLiPasternaketal., author = {Wang, Jian and Li, Zheng and Pasternak, Hartmut and Euler, Mathias}, title = {Querkrafttragf{\"a}higkeit von Wellstegtr{\"a}gern mit versteiften quadratischen Steg{\"o}ffnungen}, series = {Bauingenieur}, volume = {98}, journal = {Bauingenieur}, number = {11}, issn = {0005-6650}, doi = {10.37544/0005-6650-2023-11-31}, pages = {343 -- 353}, abstract = {Die Ergebnisse aus drei Traglastversuchen und einer umfangreichen numerischen Parameterstudie (FE-Berechnungen) zum Tragverhalten von Wellstegtr{\"a}gern mit quadratischen Steg{\"o}ffnungen werden vorgestellt. Es werden versteifte Steg{\"o}ffnungen mit einem umlaufenden Versteifungskranz betrachtet. In der Parameterstudie werden die Einfl{\"u}sse der Steg{\"o}ffnungsgeometrie, der Tr{\"a}gergeometrie und der Position der Steg{\"o}ffnung auf die Querkrafttragf{\"a}higkeit der Wellstegtr{\"a}ger untersucht.}, language = {de} }