@misc{PerezAvilaGonzalezCorderoPerezetal., author = {Perez-Avila, Antonio Javier and Gonzalez-Cordero, Gerardo and P{\´e}rez, Eduardo and Perez-Bosch Quesada, Emilio and Mahadevaiah, Mamathamba Kalishettyhalli and Wenger, Christian and Roldan, Juan Bautista and Jimenez-Molinos, Francisco}, title = {Behavioral modeling of multilevel HfO2-based memristors for neuromorphic circuit simulation}, series = {XXXV Conference on Design of Circuits and Integrated Systems (DCIS), Segovia, Spain}, journal = {XXXV Conference on Design of Circuits and Integrated Systems (DCIS), Segovia, Spain}, doi = {10.1109/DCIS51330.2020.9268652}, abstract = {An artificial neural network based on resistive switching memristors is implemented and simulated in LTspice. The influence of memristor variability and the reduction of the continuous range of synaptic weights into a discrete set of conductance levels is analyzed. To do so, a behavioral model is proposed for multilevel resistive switching memristors based on Al-doped HfO2 dielectrics, and it is implemented in a spice based circuit simulator. The model provides an accurate description of the conductance in the different conductive states in addition to describe the device-to-device variability}, language = {en} } @misc{FritscherKnoedtelMallahetal., author = {Fritscher, Markus and Kn{\"o}dtel, Johannes and Mallah, Maen and Pechmann, Stefan and Perez-Bosch Quesada, Emilio and Rizzi, Tommaso and Wenger, Christian and Reichenbach, Marc}, title = {Mitigating the Effects of RRAM Process Variation on the Accuracy of Artifical Neural Networks}, series = {Embedded Computer Systems: Architectures, Modeling, and Simulation. SAMOS 2021. Lecture Notes in Computer Science}, journal = {Embedded Computer Systems: Architectures, Modeling, and Simulation. SAMOS 2021. Lecture Notes in Computer Science}, publisher = {Springer}, isbn = {978-3-031-04579-0}, issn = {0302-9743}, doi = {10.1007/978-3-031-04580-6_27}, pages = {401 -- 417}, abstract = {Weight storage is a key challenge in the efficient implementation of artificial neural networks. Novel memory technologies such as RRAM are able to greatly improve density and introduce non-volatility and multibit capabilities to this component of ANN accelerators. The usage of RRAM in this domain comes with downsides, mainly caused by cycle-to-cycle and device-to-device variability leading to erroneous readouts, greatly affecting digital systems. ANNs have the ability to compensate for this by their inherent redundancy and usually exhibit a gradual deterioration in the accuracy of the task at hand. This means, that slight error rates can be acceptable for weight storage in an ANN accelerator. In this work we link device-to-device variability to the accuracy of an ANN for such an accelerator. From this study, we can estimate how strongly a certain net is affected by a certain device parameter variability. This methodology is then used to present three mitigation strategies and to evaluate how they affect the reaction of the network to variability: a) Dropout Layers b) Fault-Aware Training c) Redundancy. These mitigations are then evaluated by their ability to improve accuracy and to lower hardware overhead by providing data for a real-word example. We improved this network's resilience in such a way that it could tolerate double the variation in one of the device parameters (standard deviation of the oxide thickness can be 0.4 nm instead of 0.2 nm while maintaining sufficient accuracy.)}, language = {en} } @misc{BogunPerezBoschQuesadaPerezetal., author = {Bogun, Nicolas and Perez-Bosch Quesada, Emilio and P{\´e}rez, Eduardo and Wenger, Christian and Kloes, Alexander and Schwarz, Mike}, title = {Analytical Calculation of Inference in Memristor-based Stochastic Artificial Neural Networks}, series = {29th International Conference on Mixed Design of Integrated Circuits and System (MIXDES), 23-24 June 2022 , Wrocław, Poland}, journal = {29th International Conference on Mixed Design of Integrated Circuits and System (MIXDES), 23-24 June 2022 , Wrocław, Poland}, isbn = {978-83-63578-22-0}, doi = {10.23919/MIXDES55591.2022.9838321}, pages = {83 -- 88}, abstract = {The impact of artificial intelligence on human life has increased significantly in recent years. However, as the complexity of problems rose aswell, increasing system features for such amount of data computation became troublesome due to the von Neumann's computer architecture. Neuromorphic computing aims to solve this problem by mimicking the parallel computation of a human brain. For this approach, memristive devices are used to emulate the synapses of a human brain. Yet, common simulations of hardware based networks require time consuming Monte-Carlo simulations to take into account the stochastic switching of memristive devices. This work presents an alternative concept making use of the convolution of the probability distribution functions (PDF) of memristor currents by its equivalent multiplication in Fourier domain. An artificial neural network is accordingly implemented to perform the inference stage with handwritten digits.}, language = {en} } @misc{UhlmannRizziWenetal., author = {Uhlmann, Max and Rizzi, Tommaso and Wen, Jianan and P{\´e}rez-Bosch Quesada, Emilio and Al Beattie, Bakr and Ochs, Karlheinz and P{\´e}rez, Eduardo and Ostrovskyy, Philip and Carta, Corrado and Wenger, Christian and Kahmen, Gerhard}, title = {LUT-based RRAM model for neural accelerator circuit simulation}, series = {Proceedings of the 18th ACM International Symposium on Nanoscale Architectures}, journal = {Proceedings of the 18th ACM International Symposium on Nanoscale Architectures}, publisher = {ACM}, address = {New York, NY, USA}, doi = {10.1145/3611315.3633273}, pages = {1 -- 6}, abstract = {Neural hardware accelerators have been proven to be energy-efficient when used to solve tasks which can be mapped into an artificial neural network (ANN) structure. Resistive random-access memories (RRAMs) are currently under investigation together with several different memristive devices as promising technologies to build such accelerators combined together with complementary metal-oxide semiconductor (CMOS)-technologies in integrated circuits (ICs). While many research groups are actively developing sophisticated physical-based representations to better understand the underlying phenomena characterizing these devices, not much work has been dedicated to exploit the trade-off between simulation time and accuracy in the definition of low computational demanding models suitable to be used at many abstraction layers. Indeed, the design of complex mixed-signal systems as a neural hardware accelerators requires frequent interaction between the application- and the circuit-level that can be enabled only with the support of accurate and fast-simulating devices' models. In this work, we propose a solution to fill the aforementioned gap with a lookup table (LUT)-based Verilog-A model of IHP's 1-transistor-1-RRAM (1T1R) cell. In addition, the implementation challenges of conveying the communication between the abstract ANN simulation and the circuital analysis are tackled with a design flow for resistive neural hardware accelerators that features a custom Python wrapper. As a demonstration of the proposed design flow and 1T1R model, an ANN for the MNIST handwritten digit recognition task is assessed with the last layer verified in circuit simulation. The obtained recognition confidence intervals show a considerable discrepancy between the purely application-level PyTorch simulation and the proposed design flow which spans across the abstraction layers down to the circuital analysis.}, language = {en} } @misc{UhlmannPerezBoschQuesadaFritscheretal., author = {Uhlmann, Max and P{\´e}rez-Bosch Quesada, Emilio and Fritscher, Markus and P{\´e}rez, Eduardo and Schubert, Markus Andreas and Reichenbach, Marc and Ostrovskyy, Philip and Wenger, Christian and Kahmen, Gerhard}, title = {One-Transistor-Multiple-RRAM Cells for Energy-Efficient In-Memory Computing}, series = {21st IEEE Interregional NEWCAS Conference (NEWCAS)}, journal = {21st IEEE Interregional NEWCAS Conference (NEWCAS)}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, isbn = {979-8-3503-0024-6}, issn = {2474-9672}, doi = {10.1109/NEWCAS57931.2023.10198073}, pages = {5}, abstract = {The use of resistive random-access memory (RRAM) for in-memory computing (IMC) architectures has significantly improved the energy-efficiency of artificial neural networks (ANN) over the past years. Current RRAM-technologies are physically limited to a defined unambiguously distinguishable number of stable states and a maximum resistive value and are compatible with present complementary metal-oxide semiconductor (CMOS)-technologies. In this work, we improved the accuracy of current ANN models by using increased weight resolutions of memristive devices, combining two or more in-series RRAM cells, integrated in the back end of line (BEOL) of the CMOS process. Based on system level simulations, 1T2R devices were fabricated in IHP's 130nm SiGe:BiCMOS technology node, demonstrating an increased number of states. We achieved an increase in weight resolution from 3 bit in ITIR cells to 6.5 bit in our 1T2R cell. The experimental data of 1T2R devices gives indications for the performance and energy-efficiency improvement in ITNR arrays for ANN applications.}, language = {en} } @misc{PerezBoschQuesadaRizziGuptaetal., author = {Perez-Bosch Quesada, Emilio and Rizzi, Tommaso and Gupta, Aditya and Mahadevaiah, Mamathamba Kalishettyhalli and Schubert, Andreas and Pechmann, Stefan and Jia, Ruolan and Uhlmann, Max and Hagelauer, Amelie and Wenger, Christian and P{\´e}rez, Eduardo}, title = {Multi-Level Programming on Radiation-Hard 1T1R Memristive Devices for In-Memory Computing}, series = {14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023}, journal = {14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, isbn = {979-8-3503-0240-0}, doi = {10.1109/CDE58627.2023.10339525}, pages = {4}, abstract = {This work presents a quasi-static electrical characterization of 1-transistor-1-resistor memristive structures designed following hardness-by-design techniques integrated in the CMOS fabrication process to assure multi-level capabilities in harsh radiation environments. Modulating the gate voltage of the enclosed layout transistor connected in series with the memristive device, it was possible to achieve excellent switching capabilities from a single high resistance state to a total of eight different low resistance states (more than 3 bits). Thus, the fabricated devices are suitable for their integration in larger in-memory computing systems and in multi-level memory applications. Index Terms—radiation-hard, hardness-by-design, memristive devices, Enclosed Layout Transistor, in-memory computing}, language = {en} } @misc{PerezMaldonadoMahadevaiahetal., author = {P{\´e}rez, Eduardo and Maldonado, David and Mahadevaiah, Mamathamba Kalishettyhalli and Perez-Bosch Quesada, Emilio and Cantudo, Antonio and Jimenez-Molinos, Francisco and Wenger, Christian and Roldan, Juan Bautista}, title = {A comparison of resistive switching parameters for memristive devices with HfO2 monolayers and Al2O3/HfO2 bilayers at the wafer scale}, series = {14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023}, journal = {14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, isbn = {979-8-3503-0240-0}, doi = {10.1109/CDE58627.2023.10339417}, pages = {5}, abstract = {Memristive devices integrated in 200 mm wafers manufactured in 130 nm CMOS technology with two different dielectrics, namely, a HfO2 monolayer and an Al2O3/HfO2 bilayer, have been measured. The cycle-to-cycle (C2C) and device-todevice (D2D) variability have been analyzed at the wafer scale using different numerical methods to extract the set (Vset) and reset (Vreset) voltages. Some interesting differences between both technologies were found in terms of switching characteristics}, language = {en} }