@misc{KloeppelMertenHaufeetal., author = {Kl{\"o}ppel, Thomas and Merten, Mathias and Haufe, Andre and Buhl, Johannes and Bambach, Markus}, title = {On the Numerical Prediction of Process-Dependent Properties of Current High-Performance Materials with Material Model *MAT_254 in LS-DYNA}, series = {Procedia Manufacturing : 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing : 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.341}, pages = {1520 -- 1525}, language = {en} } @misc{NguyenBuhlBambach, author = {Nguyen, Lam and Buhl, Johannes and Bambach, Markus}, title = {Multi-bead Overlapping Models for Tool Path Generation in Wire-Arc Additive Manufacturing Processes}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.129}, pages = {1123 -- 1128}, language = {en} } @misc{HamaSalehWeisheitSchleifenbaumetal., author = {Hama-Saleh, Rebar and Weisheit, Andreas and Schleifenbaum, Johannes Henrich and {\"U}nsal, Ismail and Sviridov, Alexander and Bambach, Markus}, title = {Formability Analysis of Micro-Alloyed Sheet Metals Reinforced by Additive Manufacturing}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.317}, pages = {1023 -- 1028}, language = {en} } @misc{MichlSydowBambach, author = {Michl, Dennis and Sydow, Benjamin and Bambach, Markus}, title = {Ring Rolling of Pre-forms Made by Wire-arc Additive Manufacturing}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.275}, pages = {342 -- 348}, language = {en} } @misc{MeinersIhneJuergensetal., author = {Meiners, Frank and Ihne, J{\"o}rg and J{\"u}rgens, Pascal and Hemes, Susanne and Mathes, Michael and Sizova, Irina and Bambach, Markus and Hama-Saleh, Rebar and Weisheit, Andreas}, title = {New Hybrid Manufacturing Routes Combining Forging and Additive Manufacturing to Efficiently Produce High Performance Components from Ti-6Al-4V}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.215}, pages = {261 -- 267}, language = {en} } @misc{HartRawungBuhlBambach, author = {Hart-Rawung, Thawin and Buhl, Johannes and Bambach, Markus}, title = {A Fast Approach for Optimization of Hot Stamping Based on Machine Learning of Phase Transformation Kinetics}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.218}, pages = {707 -- 712}, language = {en} } @misc{MishurovaSydowThiedeetal., author = {Mishurova, Tatjana and Sydow, Benjamin and Thiede, Tobias and Sizova, Irina and Ulbricht, Alexander and Bambach, Markus and Bruno, Giovanni}, title = {Residual Stress and Microstructure of a Ti-6Al-4V Wire Arc Additive Manufacturing Hybrid Demonstrator}, series = {Metals}, volume = {6}, journal = {Metals}, number = {10}, issn = {2075-4701}, doi = {10.3390/met10060701}, language = {en} } @misc{NguyenBuhlBambach, author = {Nguyen, Lam and Buhl, Johannes and Bambach, Markus}, title = {Continuous Eulerian tool path strategies for wire-arc additive manufacturing of rib-web structures with machine-learning-based adaptive void filling}, series = {Additive Manufacturing}, volume = {Vol. 35}, journal = {Additive Manufacturing}, issn = {2214-8604}, doi = {10.1016/j.addma.2020.101265}, pages = {17}, language = {en} } @misc{BambachSizovaSydowetal., author = {Bambach, Markus and Sizova, Irina and Sydow, Benjamin and Hemes, Susanne and Meiners, Frank}, title = {Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing}, series = {Journal of Materials Processing Technology}, journal = {Journal of Materials Processing Technology}, number = {Vol. 282}, issn = {0924-0136}, doi = {10.1016/j.jmatprotec.2020.116689}, pages = {8}, language = {en} } @misc{GagliardiAmbrogioConteetal., author = {Gagliardi, Francesco and Ambrogio, Giuseppina and Conte, Romina and Bambach, Markus}, title = {Extruded joining elements manufactured by friction stir forming: an investigation of the process parameters}, series = {The International Journal of Advanced Manufacturing Technology}, volume = {106}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {11-12}, issn = {1433-3015}, doi = {10.1007/s00170-020-04992-w}, pages = {5559 -- 5570}, language = {en} } @misc{ImranAfzalBuhletal., author = {Imran, Muhammad and Afzal, Muhammad Junaid and Buhl, Johannes and Bambach, Markus and Dunlap, Anthony and Schwedt, Alexander and Aretz, Anke and Wang, Shuhan and Lohmar, Johannes and Hirt, Gerhard}, title = {Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling}, series = {Production Engineering}, volume = {14}, journal = {Production Engineering}, number = {1}, issn = {1863-7353}, doi = {10.1007/s11740-019-00932-0}, pages = {5 -- 16}, language = {en} } @misc{AlimovSizovaBibaetal., author = {Alimov, Artem and Sizova, Irina and Biba, Nikolai and Bambach, Markus}, title = {Prediction of Mechanical Properties of Ti-6Al-4V Forgings Based on Simulation of Microstructure Evolution}, series = {Procedia Manufacturing : 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing : 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/J.promfg.2020.04.326}, pages = {1468 -- 1475}, language = {en} } @misc{AfzalMaqboolHajavifardetal., author = {Afzal, Muhammad Junaid and Maqbool, Fawad and Hajavifard, Ramin and Buhl, Johannes and Walther, Frank and Bambach, Markus}, title = {Modeling the Residual Stresses Induced in the Metastable Austenitic Stainless Steel Disc Springs manufactured by Incremental Sheet Forming by a Combined Hardening Model with Phase Transformation}, series = {Procedia Manufacturing : Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing : Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.300}, pages = {1410 -- 1415}, language = {en} } @misc{BesongBuhlUensaletal., author = {Besong, Lemopi Isidore and Buhl, Johannes and {\"U}nsal, Ismail and Bambach, Markus and Polte, Mitchel and Blumberg, Julian and Uhlmann, Eckart}, title = {Development of Tool Paths for Multi-axis Single Stage Incremental Hole-flanging}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.290}, pages = {1392 -- 1398}, language = {en} } @misc{NeumannBrykarczykLenzetal., author = {Neumann, Andreas and Brykarczyk, Daniel and Lenz, Wolfgang and Bambach, Markus and Pfeifer, Herbert}, title = {Using Vault Structure Steels to Improve the Lifetime of Radiant Tubes}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.240}, pages = {1288 -- 1292}, language = {en} } @misc{EmdadiSizovaStryzhyborodaetal., author = {Emdadi, Aliakbar and Sizova, Irina and Stryzhyboroda, Oleg and Hecht, Ulrike and Buhl, Johannes and Bambach, Markus}, title = {Hot Workability of a Spark Plasma Sintered Intermetallic Iron Aluminide Alloy Above and Below the Order-disorder Transition Temperature}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.238}, pages = {1281 -- 1287}, language = {en} } @misc{IsrarBuhlBambach, author = {Israr, Rameez and Buhl, Johannes and Bambach, Markus}, title = {Numerical Analysis of Different Fixation Strategies in Direct Energy Deposition Processes}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming; edited by Markus Bambach}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming; edited by Markus Bambach}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.145}, pages = {1184 -- 1189}, language = {en} } @misc{BambachFuegenschuhBuhletal., author = {Bambach, Markus and F{\"u}genschuh, Armin and Buhl, Johannes and Jensch, Felix and Schmidt, Johannes}, title = {Mathematical Modeling and Optimization for Powder-Based Additive Manufacturing}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.158}, pages = {1159 -- 1163}, language = {en} } @misc{JedynakSviridovBambachetal., author = {Jedynak, Angelika and Sviridov, Alexander and Bambach, Markus and Beckers, Daniel and Graf, Gregor}, title = {On the Potential of Using Selective Laser Melting for the Fast Development of Forging Alloys at the Example of Waspaloy}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.138}, pages = {1149 -- 1153}, language = {en} } @misc{SefidiIsrarBuhletal., author = {Sefidi, Moein Pakdel and Israr, Rameez and Buhl, Johannes and Bambach, Markus}, title = {Rule-Based Path Identification for Direct Energy Deposition}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/jpromfg.2020.04.133}, pages = {1134 -- 1140}, language = {en} } @misc{BreussBuhlMansouriYarahmadietal., author = {Breuß, Michael and Buhl, Johannes and Mansouri Yarahmadi, Ashkan and Bambach, Markus and Peter, Pascal}, title = {A Simple Approach to Stiffness Enhancement of a Printable Shape by Hamilton-Jacobi Skeletonization}, series = {Procedia Manufacturing}, volume = {Vol. 47}, journal = {Procedia Manufacturing}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.147}, pages = {1190 -- 1196}, abstract = {The 3D-Printing technology is ready to produce parts with specific properties like individual stiffness. Based on a predefined outer shape, the inner structure of a printed part defines mainly the mechanical features. By Hamilton-Jacobi skeletonization, a stiffness enhancement of a printable shape can be achieved in a way, that a novel AM-corner includes linear axis function. Originating in the field of shape analysis in computer vision and graphics, the so-called medial axis transform (MAT) is designed for the computation of a structure that resembles the bone structure of biological shapes. The input for MAT computation is typically a shape's boundary. The arising topological skeletons have proven to provide a useful concept for many applications; however, their computation is generally intricate and also known to rely on many parameters, diminishing the accessibility of skeletonization methods. In this work, the classical Hamilton-Jacobi skeletonization approach is adopted to compute a stability enhancing shape structure. As the basic method has not been designed for the context of additive manufacturing, a set of suitable modifications are introduced to design an algorithm that suits our intended purpose. Unlike the traditional skeletonization schemes, the resulting method appears to be robust and in practice almost completely automated as we can identify useful generic parameter settings. By a finite element method (FEM) study, the elastic stress properties of the AM-corner with linear axis function is validated and printed with in metal (1.4404) with the 3D Selected Laser Melting (SLM) system AconityMIDI. The AM-knot with skeletonization guides approximately 20 times better than a standard knot. While the first obtained results are shown as 2.5 dimensional shapes, it is emphasized that the proposed algorithm offers many possibilities for extensions to three dimensions and variations in context of additive manufacturing.}, language = {en} } @misc{BuhlHartRawungBambach, author = {Buhl, Johannes and Hart-Rawung, Thawin and Bambach, Markus}, title = {Nutzung von Neuralen Netzen zur effizienten Auslegung des Pressh{\"a}rtens von 22MnB5}, series = {Tagungsband zum 15. Erlanger Workshop Warmblechumformung, Erlangen, den 17. November 2020}, journal = {Tagungsband zum 15. Erlanger Workshop Warmblechumformung, Erlangen, den 17. November 2020}, publisher = {Lehrstuhl f{\"u}r Fertigungstechnologie, Friedrich-Alexander-Universit{\"a}t Erlangen-N{\"u}rnberg}, address = {Erlangen}, isbn = {978-3-00-066911-8}, pages = {99 -- 112}, language = {de} }