@inproceedings{MarkowskiNarraAyetal., author = {Markowski, Jens and Narra, Satyanarayana and Ay, Peter and Pempel, Harry and M{\"u}ller, Mike}, title = {Automatic disassembly and recycling of lithium-traction-accumulators}, series = {Proceedings, XXVII. IMPC, Santiago de Chile, 2014}, booktitle = {Proceedings, XXVII. IMPC, Santiago de Chile, 2014}, publisher = {GECAMIN}, address = {Santiago de Chile}, pages = {227 -- 236}, abstract = {Within the next few years major changes in mobility are expected. Increasing numbers of electric powered cars, electrobikes and E-Scooters define the transport sector. Recently lithium based traction batteries as storage medium have led into matrurity of series production combining high electrical efficiencies with low weights and compact dimensions. Due to the relatively young development with lithium batteries utilization, only few investigation were conducted regarding their recycling. Conventional battery recycling processes can not be applied due to differences in design and chemistry. So an automated disassembly and processing procedure for lithium traction batteries has been developed in the R/D-project "Li-WERT". Instead of complete smelting of the batteries without pretreatment, an automated disassembly and specific treatment of the material streams was realised, adjusted to the needs of the subsequent recovery technologies. A higher quality, with reduced expenses for the separation of fine-grained or fused material mixes, can be obtained for the individual components. The automated disassembly using an industrial robot significantly reduces dangers for the operating crew. The selective disassembly and beneficiation allows full recovery of the fractions. The batteries will be disassembled to cell level by the industrial robot. Anodes, cathodes, and separation layers are isolated and processed. The technology is designed, that no waste is generated for disposal. The pelletised cathode coating and the other separated metals (stainless steel, copper, aluminum) can be used in respective metallurgical plants. Circuit boards and plug contacts are also coveted secondary raw materials for reuse. The process is modular and offers high flexibility, e. g. for new battery types/ sizes by quick adjustment of the robot and tool change. Adaptation to other cathode materials (e. g. Li[FePO]) is possible. After finishing the R/D-project, a pilot plant for demontage was realised in 2013.}, language = {en} } @inproceedings{MarkowskiAyPempeletal., author = {Markowski, Jens and Ay, Peter and Pempel, Harry and M{\"u}ller, Mike}, title = {Entwicklung eines innovativen Verfahrens zur automatisierten Demontage und Auf-bereitung von Lithium-Ionen-Batterien aus Fahrzeugen}, series = {Recycling und Rohstoffe : Band 5}, booktitle = {Recycling und Rohstoffe : Band 5}, edition = {1. Auflage}, publisher = {TK Verlag Karl Thom{\´e}-Kozmiensky}, address = {Neuruppin}, isbn = {978-3-935317-82-5}, pages = {443 -- 456}, abstract = {Die automobile Antriebstechnik steht in den n{\"a}chsten Jahrzehnten vor tief greifenden Ver{\"a}n-derungen. Nachdem {\"u}ber 125 Jahre der Verbrennungsmotor die vorherrschende Antriebsart darstellte, basieren neue Entwicklungen auf Elektroantrieben oder auf der Kombination ver-schiedener Antriebsformen. Fahrzeuge mit elektrischen Antrieben haben mittlerweile den Status der Serienreife erreicht und werden perspektivisch zunehmend das Straßenbild be-stimmen. Mit der so genannten Lithium-Ionen-Traktionsbatterie wurde in den letzten Jahren ein Spei-chermedium zur Serienreife gef{\"u}hrt, welches einen hohen elektrischen Wirkungsgrad mit kompakten Maßen und geringem Eigengewicht vereinigt. Mit den auf der Nutzung von Li-thium-Akkumulatoren basierenden Antriebskonzepten kann ein entscheidender Schritt zur Umsetzung einer umfassenden Verbreitung der elektrischen Antriebstechnik im Bereich der individuellen Mobilit{\"a}t erfolgen.}, language = {de} } @techreport{SchlummerWagenknechtMarkowski, author = {Schlummer, Martin and Wagenknecht, Udo and Markowski, Jens}, title = {Verkehrsf{\"a}hige Polymer-Recyclate aus der Elektro(nik)altger{\"a}teverwertung durch spektroskopische Sortierung und dichtebasierte St{\"o}rstoffabtrennung}, publisher = {Fraunhofer IVV}, address = {Freising}, pages = {71}, abstract = {Schlussbericht Projekt SpectroDense}, language = {de} } @misc{SchlummerArendsMaeureretal., author = {Schlummer, Martin and Arends, Dagmar and M{\"a}urer, Andreas and Markowski, Jens and Wagenknecht, Udo}, title = {Characterisation and materials flow management for waste electrical and electronic equipment plastics from German dismantling centres}, series = {Waste Management \& Research}, volume = {33}, journal = {Waste Management \& Research}, number = {9}, issn = {1096-3669}, doi = {10.1177/0734242x15588585}, pages = {775 -- 784}, abstract = {Waste electrical and electronic equipment is a complex waste stream and treatment options that work for one waste category or product may not be appropriate for others. A comprehensive case study has been performed for plastic-rich fractions that are treated in German dismantling centres. Plastics from TVs, monitors and printers and small household appliances have been characterised extensively. Based on the characterisation results, state-of-the-art treatment technologies have been combined to design an optimised recycling and upgrade process for each input fraction. High-impact polystyrene from TV casings that complies with the European directive on the restriction of hazardous substances (RoHS) was produced by applying continuous density separation with yields of about 60\%. Valuable acrylonitrile butadiene styrene/ polycarbonate can be extracted from monitor and printer casings by near- infrared-based sorting. Polyolefins and/or a halogen-free fraction of mixed styrenics can be sorted out by density separation from monitors and printers and small household appliances. Emerging separation technologies are discussed to improve recycling results.}, language = {en} } @misc{KloseReinholdLogschetal., author = {Klose, Markus and Reinhold, Romy and Logsch, Florian and Wolke, Florian and Linnemann, Julia and Stoeck, Ulrich and Oswald, Steffen and Uhlemann, Martin and Ballach, Juan and Markowski, Jens and Ay, Peter and Giebeler, Lars}, title = {Softwood lignin as a sustainable feedstock for porous carbons as active material for supercapacitors using an ionic liquid electrolyte}, series = {ACS Sustainable Chemistry \& Engineering}, volume = {5}, journal = {ACS Sustainable Chemistry \& Engineering}, number = {5}, pages = {4095 -- 4102}, language = {en} } @misc{MarkowskiHintze, author = {Markowski, Jens and Hintze, Helene}, title = {R{\"u}ckgewinnung und Aufbereitung der Kathodenbeschichtungen von Lithium-Ionen-Traktionsakkumulatoren}, series = {Technical Days - Aktuelle Entwicklungen und zuk{\"u}nftige Herausforderungen in der Welt des Trockenzerkleinerns und Sichtens - Symposium 2019}, journal = {Technical Days - Aktuelle Entwicklungen und zuk{\"u}nftige Herausforderungen in der Welt des Trockenzerkleinerns und Sichtens - Symposium 2019}, address = {Hanau}, abstract = {Die energie- und ressourcenschonende Aufbereitung von End-of-life-Lithium-Ionenakkus ist ein gesellschaftliches und wirtschaftliches Erfordernis, da mit dem zunehmenden Einsatz von Elektrofahrzeugen die Zahl von ausgedienten oder defekten Li-Traktionsbatterien zunehmen wird. Die klassische Aufbereitung dieser Akkus, insbesondere mit Hochtemperaturverfahren, ist energetisch aufw{\"a}ndig und f{\"u}hrt zudem nur zur partiellen R{\"u}ckgewinnung der Wertelemente, die dann auch erst durch weitere mechanische und chemische Prozesse wieder zu verwendbaren Materialien werden. Die vom Fachgebiet Aufbereitungstechnik der BTU mit verschiedenen Industriepartnern seit 2010 entwickelte Technologie verfolgt einen grundlegend anderen Ansatz. Ausgehend von einer hoch mechanisierten und teilweise automatisierten Demontage der Akkus k{\"o}nnen dabei die Einzelkomponenten weitgehend unzerst{\"o}rt und ohne thermische Sch{\"a}digung oder Verlust brennbarer und leicht fl{\"u}chtiger Anteile zur{\"u}ck gewonnen werden. F{\"u}r die Abtrennung der Kathodenbeschichtung von der Tr{\"a}gerfolie kommt nach der Zellendemontage eine hoch mechanisierte Nassaufbereitung zum Einsatz, bei der mittlerweile vollst{\"a}ndig auf den Einsatz von Chemikalien verzichtet werden kann. Das separierte NMC-Schwarzmaterial soll so aufbereitet werden, dass es zuk{\"u}nftig in Recyclat-Zellen f{\"u}r verschiedene Anwendungen genutzt werden kann. Dazu werden verschiedene Zerkleinerungs- und Sortiertechnologien getestet.}, language = {de} } @misc{MarkowskiAckerDuckeetal., author = {Markowski, Jens and Acker, J{\"o}rg and Ducke, Jana and Schelter, Matthias}, title = {Recovery and secondary use of Nickel-Manganese-Cobalt-Material from Cathodes of electric car traction batteries}, series = {59th Annual Conference of Metallurgists : emerging technologies in materials and metallurgical industries : COM 2020}, volume = {2020}, journal = {59th Annual Conference of Metallurgists : emerging technologies in materials and metallurgical industries : COM 2020}, publisher = {Canadian Institute of Mining, Metallurgy and Petroleum}, isbn = {978-1-926872-47-6}, abstract = {Automotive technology is increasingly determined by electric vehicles driven by high-performance lithium ion batteries (LIB). Li-ion batteries equipped with layered oxide cathodes, which are constituted by oxides of nickel, manganese and cobalt, are proven as storage devices that combine high electrical power, high cycling stability and compact dimensions. These batteries contain large amount of valuable elements, such as the cathodes consisting of cobalt and nickel, the electrode carrier foils consisting of copper and aluminium. Therefore, spent LIB's are valuable secondary resources. Thermal processing as the classical recycling-technology for LIB's is energy-intensive and allow only a partial recovery of some value elements. Scientists of the Brandenburg University of Technology (Germany) developed in collaboration with industrial partners (SME) a process, in which the complex system LIB is partly automated dismounted into its basic components. The core of this process is the separation of anodes and cathodes from each other and an almost complete recovery of the cathode material from the foil. The recovered cathode material has an enormous potential for a re-use in new LIB's. By a proper combination of separation and post-treatment the material has a quality that is close to virgin cathode material. Preliminary studies made on LIB's containing a fraction of recycled cathode material up to 50\% show an electrical performance comparable to LIB's made from virgin material.}, language = {en} } @misc{MarkowskiLohseGarcia, author = {Markowski, Jens and Lohse, Anja and Garcia, Javier}, title = {Planning and realization of a plant for the recovery of gold from thin coatings by hydro-biotechnological methods}, series = {GOLD 2022 Conference, Qu{\´e}bec City Convention Centre, July 17-20, 2022}, journal = {GOLD 2022 Conference, Qu{\´e}bec City Convention Centre, July 17-20, 2022}, publisher = {Conferium}, address = {Quebec (Can)}, abstract = {Production waste from the manufacture of printed circuit boards often has gold-containing contact strips and dots whose gold content is very low. Recycling of these gold coatings by means of conventional melting processes is technically hardly possible, since the carrier materials often contain mechanical reinforcements and flame retardants in addition to thermosetting plastics. Furthermore, there would be significant gold losses in the smelting process. Together with two industrial partners, at BTU in the last years a technology was developed, which can be used to decoat gold-bearing waste from PCB-production and contact stripes using biotechnological methods. As a result, a complete and separate recovery of the gold tinsel and the carrier material copper with high purity is possible. The bioleaching process is realized with iron and sulfur oxidizing bacteria, especially Leptospirilum ferrooxidans and Acidithiobacillus ferrooxidans. The first pilot plant with a planned throughput of nearly 2000 kg per year is currently in realization. The biotechnological apparatus consists of a closed leaching reactor (with a capacity of approx. 300 liters of fluid) as the core element and the peripheral equipment (fermenter, cementation reactor, filter systems etc.). Compared to processes using inorganic acids, shorter leaching times can be achieved, partial regeneration and multiple use of the bioleaching solution is possible. After optimizing the conditions, a process time of only 60 hours per leaching-charge is possible. Over a period of 2-3 days, the microorganisms dissolve the copper layers present as gold carriers on the polymer. The dissolved gold flakes are filtered off and the leaching liquid containing copper is fed to the next process stage. There, during approx. 3-4 days, the dissolved copper is recovered by feeding metallic iron (with a sacrificial anode). The microorganisms present in the solution accelerate this process. All process steps take place at moderate temperatures (< 40°C) and in a slightly acidic environment. The separated gold tinsel as main product with a content of over 900 mg/g Au is a suitable input for the precious metal smelter. The copper precipitates in metallic form and can be recovered in high purity (>90\%) as a by-product. Due to the biological leaching and the resulting concentration of the gold components, only < 1 wt.\% of the waste containing precious metals has to be thermally treated. This can significantly reduce the CO 2 -emissions from the gold recycling process compared with thermal processes and with conventional gold mining.}, language = {en} } @inproceedings{MarkowskiPempelAy, author = {Markowski, Jens and Pempel, Harry and Ay, Peter}, title = {Recovery of nickel-containing coatings with hydro-biotechnological methods}, series = {COM 2017, Conference of Metallurgists (MetSoc), The 56th Annual Conference of Metallurgists, hosting World Gold and Nickel-Cobalt, August 27-30, 2017, Hyatt Regency Vancouver, British Columbia, Canada}, booktitle = {COM 2017, Conference of Metallurgists (MetSoc), The 56th Annual Conference of Metallurgists, hosting World Gold and Nickel-Cobalt, August 27-30, 2017, Hyatt Regency Vancouver, British Columbia, Canada}, publisher = {Canadian Institute of Mining, Metallurgy and Petroleum}, address = {Vancouver}, isbn = {978-1-926872-36-0}, abstract = {Metal-coated thermoplastic parts find more and more functional and aesthetic applications in the interior and exterior of cars. The vapor-deposited or electroplated coatings are usually composed of a plurality of nickel- and chromium-containing layers, which are applied to copper-containing carrier layers on the polymers. Previously, recycling processes are mainly focussed at the recovery or thermal utilization of the plastics. Targeted and selective recycling of the metallic coatings is usually not carried out. Together with several SME, BTU developed a process, in which a complete and separate recovery of all components in high purity is possible with biotechnological methods. The bioleaching is carried out with iron and sulfur-oxidizing bacteria, esp. Acidithiobacillus ferrooxidans. The copper-containing layers are dissolved in the solution; chromium- and nickel-containing particles are precipitated as solids. After the bioleaching, a mechanical separation of the individual metal-containing components and their separate workup are carried out. End-products are metallic copper, a nickel- and chromium-containing solid and the cleaned plastics. The bioleaching ensures a high purity of the end products. Through the use of bacteria, which are also found in nature, the process is environmentally friendly. Compared to chemical leaching using inorganic acids, considerably shorter leaching times can be achieved. In addition to the optimization of the leaching process, the R/D-project also includes the development and testing of the apparatus technology.}, language = {en} } @inproceedings{MarkowskiAyPempeletal., author = {Markowski, Jens and Ay, Peter and Pempel, Harry and Logsch, Florian}, title = {Recycling of metal-coated plastic parts from end-of-life-vehicles (ELV) with biotechnological methods}, series = {Proceedings of the XXVIII International Mineral Processing Congress (IMPC 2016), September 11-15, 2016, Qu{\´e}bec City, Canadian Institute of Mining, Metallurgy and Petroleum}, booktitle = {Proceedings of the XXVIII International Mineral Processing Congress (IMPC 2016), September 11-15, 2016, Qu{\´e}bec City, Canadian Institute of Mining, Metallurgy and Petroleum}, isbn = {978-1-926872-29-2}, pages = {Paper 191}, abstract = {Due to the European Directive 2000/53/EC on end-of-life-vehicles, from 2015 on more than 95\% of car materials have to be recycled. In order to recycle the materials back into the economic cycle, it is necessary to produce products with high quality and purity. Plastic components in cars, which are coated with metals by vapour deposition or electroplating, have a wide circulation (e.g., as cladding panel or trim strip for interiors and exteriors). In the end-of-life-vehicle recycling process, these plastic-metal composites are not considered in usual technologies (car shredder) and are not separated from Automotive Shredder Residue. These parts can be separated by optical or HF-detection sorting and then introduced to a specific treatment. Experiments with a specially developed bioleaching configuration showed that the thin coatings, which consist mainly of copper, nickel and chromium, can be removed efficiently from the polymer base materials by a bioleaching solution with Acidothiobacillus ferrooxidans as a leaching agent. The solution used was produced in special fermenters with a 9K-nutrient salt media. During the bioleaching process at 35°C maximum temperature, most of the copper is dissolved and the other metals accumulate as metal sludge. The bacterial cultures based on A. ferrooxidans are robust and resilient. After a 48-hour bioleaching period while the composites were stirred regularly with ventilation, the plastic particles were completely free from metallic coatings. The metal components are separated for further use: undissolved components (mainly Ni and Cr) are separated by decantation of the solution; dissolved copper recovey is carried out by cementation of copper. The cementated solid contains ~98\% Cu, along with small amounts of other metals. With the bioleaching process, good separation and re-utilization of the metallic coatings is possible. The cleaned plastic parts were prepared by compounding for new applications with injection-moulding.}, language = {en} } @misc{MarkowskiArellanoGarciaMeissneretal., author = {Markowski, Jens and Arellano-Garcia, Harvey and Meissner, Andr{\´e} and Acker, J{\"o}rg}, title = {Comparative studies on the quality of recovered secondary graphites from the recycling of lithium-ion traction batteries}, series = {Sustainable Minerals}, journal = {Sustainable Minerals}, publisher = {Mining Engineering}, address = {Falmouth (UK)}, abstract = {Automotive technology is increasingly determined by drives based on electric motors in combination with batteries. The lithium-ion traction battery is a storage medium that combines high electrical efficiency with compact dimensions and relatively low weight. For the recycling of the cathode coatings (esp. Ni, Mn, Co) and peripheral battery components a variety of recycling options already exist. The graphite coating of the anodes has hardly been the focus of research activities to date. State of the art is currently the melting of the complete Copper-anode foils including graphite coating, whereby the graphite contributes only as a carbon carrier to the recycling of the copper. Separation and reuse of the very high-quality graphite on an industrial scale has not yet taken place. At the BTU, a methodology has been developed, with which recovered anode graphites from traction batteries can be comprehensively characterised chemically and mechanically-physically. On this basis, targeted preparation for secondary applications is possible. The secondary graphites achieve a quality that allows them to be reused as second-use anode material and for other applications.}, language = {en} } @inproceedings{Markowski, author = {Markowski, Jens}, title = {Characterisation and materials flow management for WEEE plastics from German dismantling centres}, series = {ISWA World Congress, Antwerpen, 2015}, booktitle = {ISWA World Congress, Antwerpen, 2015}, publisher = {Interafval, Belgium}, language = {en} } @inproceedings{MarkowskiNarraAyetal., author = {Markowski, Jens and Narra, Satyanarayana and Ay, Peter and Hein, Christian and Weber, Alfred}, title = {Production of agglomerates from iron-containing fines from the ASR-recycling processes for its use in blast furnaces}, series = {XXVI International Mineral Processing Congress - IMPC 2012 : New Delhi, India, September 24 - 28, 2012, vol. 1}, booktitle = {XXVI International Mineral Processing Congress - IMPC 2012 : New Delhi, India, September 24 - 28, 2012, vol. 1}, address = {New Delhi}, isbn = {81-901714-3-7}, abstract = {The EU Directive 2000/53/EC on end-of life vehicles (ELVs) states that in 2015 at least 85 wt.-\% of a vehicle has to be reused or recycled. This result in the obligatory need to separate additionally metallic and other components of the automotive shredder residues (ASR), so that they can be professionally prepared for recycling and reuse further. Currently the iron-containing fines of ASR are deposited as it is not possible to process in blast furnaces due to its particle size (< 4 mm), composition and material properties. Additionally problems are also caused in handling and transportation (dust) of the material. This work focuses mainly on the ASR materials utilization in blast furnaces. Material was further separated into two consecutive fractions by carrying out repeated crushing and magnetic separation twice. The two fractions have significantly higher iron content (up to 75 wt.-\%) compared to the initial material mixture. The materials were assessed for their usage in blast furnaces based on the possible pelletisation with and without binders, stability of pellets, shape and size of pellets, etc. Pelletisation of the material was carried out with a single mould pellet press. Further lignite coal was added to the mixture as additive which improved the pelletisation behavior and the mechanical stability of pellets. Lignite coal was chosen as reducing agent in the blast furnace process contributing towards additional savings in energy supplied. The experiments reveal that the production of pellets from iron-containing fines is possible with a lignite coal admixture of about 15 wt.-\%. These pellets displayed good mechanical stability and can be used in blast furnace processes in recovery of the recyclable metals which are currently not recycled. The recycling of not yet recyclable metals would reduce the deposition and can be easily adopted into the economic cycle by their utilization.}, language = {en} } @inproceedings{KleinStollbergMarkowskietal., author = {Klein, Robert and Stollberg, Christian and Markowski, Jens and Willscher, S. and Ay, Peter}, title = {Biodissolution for recovery of precious metals from electronic scrap}, series = {Proceedings of the XXIII International Mineral Processing Congress, Istanbul, Turkey 3-8 September 2006, Vol. 2}, booktitle = {Proceedings of the XXIII International Mineral Processing Congress, Istanbul, Turkey 3-8 September 2006, Vol. 2}, editor = {{\"O}nal, G{\"u}ven}, publisher = {Promed Advertising Agency}, address = {Istanbul}, isbn = {975-7946-29-X}, pages = {1557 -- 1560}, language = {en} } @inproceedings{KleinStollbergMarkowskietal., author = {Klein, Robert and Stollberg, Christian and Markowski, Jens and Willscher, S. and Ay, Peter}, title = {Recovery of metals from circuit boards with biodissolution}, series = {10th Conference on Environment and Mineral Processing, 22.6.-24.6.2006, VB-TU Ostrava, Czech Republic}, booktitle = {10th Conference on Environment and Mineral Processing, 22.6.-24.6.2006, VB-TU Ostrava, Czech Republic}, publisher = {Technical University of Ostrava}, address = {Ostrava}, language = {en} } @inproceedings{MarkowskiLogschAyetal., author = {Markowski, Jens and Logsch, Florian and Ay, Peter and Kanthak, Manfred and M{\"u}ller, Bodo}, title = {Recycling of non-ferrous metals, precious metals and rare earth metals from MSW}, series = {Proceedings, XXVII. IMPC, Santiago de Chile, 2014}, booktitle = {Proceedings, XXVII. IMPC, Santiago de Chile, 2014}, publisher = {GECAMIN}, address = {Santiago de Chile}, pages = {237 -- 245}, abstract = {Presently the global commodity situation for non ferrous-, precious- and rare metals is characterized by a strong increase in onsumption and a simultaneous shortage of materials derived from primary sources. So the use of secondary raw materials gains is important due to economic and ecological reasons. Non Ferrous-, precious- and rare earth metals were detected in household waste (Municipal solid waste, MSW) for years. In MSW-treatments plants NF-metals are actually mostly separated from dried fractions. The separation of these metals is carried out with the aim of removing particles which disrupt further processing. A selective enrichment of individual non-ferrous metals has not been carried out previously. The separated fractions contain mixtures of Al, Cu, Zn, Pb, Sn, alloys, precious metals (e. g. Au, Ag, Pt) and rare metals (Ga, In, Nd etc.) along with considerable amounts of contaminations. The R\&D project "NE-Rec" selectively processes the coarsely separated non-ferrous-metal-conglomerates increasing the concentration of targeted metals. Metals and metal mixtures are concentrated by sorting steps and the impurities are discharged from the process. Still contaminated precious metals are then subjected to a wet-chemical treatment. So metals can be specifically brought into solution or can be precipitated to separate unwanted components (inerts, polymers, foreign metals). Further the relevant metals will be concentrated by thermal-metallurgical processes. The technology, developed in the R\&D project, enables identification, separation and processing of non-ferrous metals, precious metals and REM in household waste and transfers them into further processable individual fractions.}, language = {en} } @misc{MarkowskiLohseWagner, author = {Markowski, Jens and Lohse, Anja and Wagner, Holger}, title = {Aggregate for the recovery of gold from thin coatings by hydro-biotechnological methods}, series = {Biomining´21, MEI Conferences, 1 Freeman Collins Drive, Trescobeas Road Falmouth, Cornwall, UK}, journal = {Biomining´21, MEI Conferences, 1 Freeman Collins Drive, Trescobeas Road Falmouth, Cornwall, UK}, editor = {Wills, Barry}, publisher = {MEI Conferences}, address = {Falmouth, UK}, abstract = {Together with industrial partners, a complex apparatus was developed at the Brandenburg Technical University Cottbus-Senftenberg, which can be used to decoat gold-bearing waste from PCB- produc-tion waste and contact stripes using biotechnological methods. As a result, a complete and separate recovery of the gold flakes and the carrier material copper with high purity is possible. The bioleaching process is done with iron and sulfur oxidizing bacteria, especially Acidithiobacillus ferrooxidans, Leptospirilum ferrooxidans and Acidithiobacillus thiooxidans. Compared to processes using inorganic acids, shorter leaching times can be achieved, partial regenera-tion and multiple use of the bioleaching solution is possible (more than 10 times with the same leach-ing solution). After optimizing the conditions a process time of only 60 hours was reached. The sepa-rated gold tinsel with a content of over 900 mg/g Au is then fed into a precious metal smelter. Due to the biological leaching and the resulting concentration of the gold components, only < 1 wt.\% of the waste containing precious metals has to be thermally treated.}, language = {en} } @techreport{NarraAyMarkowskietal., author = {Narra, Satyanarayana and Ay, Peter and Markowski, Jens and Glaser, Claudia}, title = {Grundlagenuntersuchungen: Innovative Makroverkapselung von G{\"a}rresten}, publisher = {BTU, LS Aufbereitungstechnik}, address = {Cottbus}, pages = {56}, language = {de} } @misc{MarkowskiAbendrothLapushynskaetal., author = {Markowski, Jens and Abendroth, Christian and Lapushynska, Alina and Lohse, Anja}, title = {Experiences from the commissioning of a bioleaching plant for the recovery of gold from printed circuit boards}, series = {Biomining´23 - 11th International Symposium on Biomining}, journal = {Biomining´23 - 11th International Symposium on Biomining}, publisher = {Mining Engineering}, address = {Falmouth (UK)}, abstract = {Production waste from the manufacture of PCB often contains gold-containing contact-strips, whereby the gold content is < 1 \%. Recycling of these gold coatings with conventional melting processes is technically hardly, since the carrier materials often contain mechanical reinforcements and flame retardants in addition to thermosetting plastics. With mechanical recycling, gold losses of 50\% are possible. Therefore, a bioleaching plant for the recovery of gold and copper as preliminary stage for the smelting process has been in operation on m\&k´s site since May 2022. The bioleaching is realized with iron and sulfur oxidizing bacteria, e.g. Leptospirilum ferrooxidans. The apparatus consists of a 400 litres-leaching bioreactor and peripheral equipment (fermenter, cementation, filters). The plant can process up to 10 kg of gold-containing PCB waste per batch, while simultaneously regenerating a second batch of bioleaching fluid. The process can recover up to 450 mg goldtinsel and 25 g copperpowder per Kilogramm input.}, language = {en} }