@inproceedings{MinhasHalbauerBerger, author = {Minhas, Sarfraz Ul-Haque and Halbauer, Marcel and Berger, Ulrich}, title = {A Multilevel Reconfiguration Concept to Enable Versatile Production in Distributed Manufacturing}, series = {7th International Conference on Digital Enterprise Technology, (DET 2011), Athens, 28 - 30 September 2011}, booktitle = {7th International Conference on Digital Enterprise Technology, (DET 2011), Athens, 28 - 30 September 2011}, isbn = {978-960-88104-2-6}, abstract = {The manufacturing industry is confronting challenges due to high diversity of product variants,reduced product life cycles,short innovation cycles, faster time to market as well as strictenvironmental regulations. These challenges have persuaded manufacturers to exploit conceptsrelated to open innovation, distributed manufacturing, modular and scalable production systemdesign and eco-efficient production. This paper aims at providing a short review of state of the art inreconfiguration of distributed production systems and focuses on new strategies to resolvecomplexities that arise subsequently. In this regard, a reconfiguration concept based on newstrategic objectives has been proposed to enable customized production. The approach will beimplemented and validated in the collaborative projects.}, language = {en} } @inproceedings{LehmannHalbauerEuhusetal., author = {Lehmann, Christian and Halbauer, Marcel and Euhus, Dirk and Overbeck, Daniel}, title = {Milling with industrial robots: Strategies to reduce and compensate process force induced accuracy influences}, series = {Proceedings of the 17th IEEE International Conference on Emerging Technologies \& Factory Automation (ETFA 2012), Krakow, Poland, 17 - 21 September 2012, vol. 2}, booktitle = {Proceedings of the 17th IEEE International Conference on Emerging Technologies \& Factory Automation (ETFA 2012), Krakow, Poland, 17 - 21 September 2012, vol. 2}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-4673-4735-8}, pages = {1075 -- 1078}, abstract = {Industrial robots offer a good basis for machining from a conceptual point of view. However they are rarely utilized for machining applications in industry due to their low stiffness and the bad achievable work piece quality. Available solutions using position control of the tool require costly additional hardware and measurement equipment; force controlled solutions depend on low level controller access that is not commonly available for generic cell setups. This paper proposes a three-step approach to compensate for process force induced accuracy errors: (1) selection of appropriate milling strategies and cutting parameters, (2) an offline compensation of the force induced deviations and (3) a respective online compensation method. Experimental validation of the results has been performed for the first two steps.}, language = {en} } @inproceedings{LehmannOlofssonNilssonetal., author = {Lehmann, Christian and Olofsson, Bj{\"o}rn and Nilsson, Klas and Halbauer, Marcel and Haage, Mathias and Robertsson, Anders and S{\"o}rnmo, Olof and Berger, Ulrich}, title = {Robot Joint Modeling and Parameter Identification Using the Clamping Method}, series = {Proceedings of 7th IFAC Conference on Manufacturing Modelling, Management and Control (MIM)}, booktitle = {Proceedings of 7th IFAC Conference on Manufacturing Modelling, Management and Control (MIM)}, isbn = {978-3-902823-35-9}, pages = {813 -- 818}, language = {en} } @inproceedings{HalbauerLehmannStaedteretal., author = {Halbauer, Marcel and Lehmann, Christian and St{\"a}dter, Jost Philipp and Berger, Ulrich and Leali, Francesco}, title = {Milling strategies optimized for industrial robots to machine hard materials}, series = {2013 IEEE 18th Conference on Emerging Technologies \& Factory Automation (ETFA 2013), Cagliari, Italy, 10 - 13 September 2013, vol. 1}, booktitle = {2013 IEEE 18th Conference on Emerging Technologies \& Factory Automation (ETFA 2013), Cagliari, Italy, 10 - 13 September 2013, vol. 1}, publisher = {IEEE}, address = {Piscataway, NJ}, pages = {375 -- 378}, language = {en} } @misc{BergerHalbauerLehmannetal., author = {Berger, Ulrich and Halbauer, Marcel and Lehmann, Christian and St{\"a}dter, Jost Philipp}, title = {Pr{\"a}zisionsfr{\"a}sen mit Industrierobotern - Strategien zur Reduzierung und Kompensation von durch Prozesskr{\"a}ften verursachte Genauigkeits-, Positionier- und Fertigungstoleranzabweichungen}, series = {Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb - ZWF}, volume = {107}, journal = {Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb - ZWF}, number = {7-8}, issn = {0947-0085}, pages = {533 -- 536}, language = {de} } @inproceedings{HalbauerLehmannStaedteretal., author = {Halbauer, Marcel and Lehmann, Christian and St{\"a}dter, Jost Philipp and Berger, Ulrich}, title = {Servicerobotik zum Handhaben biegeschlaffer Teile mittels Tiefenbildsensor}, series = {Automation 2013, 14. Branchentreff der Mess- und Automatisierungstechnik, Kongresshaus Baden-Baden, 25. und 26. Juni 2013}, booktitle = {Automation 2013, 14. Branchentreff der Mess- und Automatisierungstechnik, Kongresshaus Baden-Baden, 25. und 26. Juni 2013}, publisher = {VDI Verlag}, address = {D{\"u}sseldorf}, isbn = {978-3-18-092209-6}, pages = {113 -- 116}, language = {de} } @inproceedings{LehmannHalbauervanderZwaagetal., author = {Lehmann, Christian and Halbauer, Marcel and van der Zwaag, Johnny and Schneider, Ulrich and Berger, Ulrich}, title = {Offline Path Compensation to Improve Accuracy of Industrial Robots for Machining Applications}, series = {Automation 2013, 14. Branchentreff der Mess- und Automatisierungstechnik, Kongresshaus Baden-Baden, 25. und 26. Juni 2013}, booktitle = {Automation 2013, 14. Branchentreff der Mess- und Automatisierungstechnik, Kongresshaus Baden-Baden, 25. und 26. Juni 2013}, publisher = {VDI Verlag}, address = {D{\"u}sseldorf}, isbn = {978-3-18-092209-6}, pages = {147 -- 152}, language = {en} } @misc{StaedterLehmannHalbaueretal., author = {St{\"a}dter, Jost Philipp and Lehmann, Christian and Halbauer, Marcel and Berger, Ulrich and Gnorski, Harry and Schulze, T.}, title = {Automatisierte robotergest{\"u}tzte Gefahrgutverladung im explosionsgesch{\"u}tzten Outdoorbereich}, series = {Technische Sicherheit}, journal = {Technische Sicherheit}, issn = {2191-0073}, pages = {40 -- 46}, language = {de} } @inproceedings{HaageHalbauerLehmannetal., author = {Haage, Mathias and Halbauer, Marcel and Lehmann, Christian and St{\"a}dter, Jost Philipp}, title = {Increasing Robotic Machining Accuracy Using Offline Compensation Based on Joint-Motion Simulation}, series = {Proceedings for the joint conference of ISR 2014, 45th International Symposium on Robotics, Robotik 2014, 8th German Conference on Robotics, 2 - 3 June 2014 parallel to Automatica}, booktitle = {Proceedings for the joint conference of ISR 2014, 45th International Symposium on Robotics, Robotik 2014, 8th German Conference on Robotics, 2 - 3 June 2014 parallel to Automatica}, publisher = {VDE-Verlag}, address = {Berlin [u.a.]}, isbn = {978-3-8007-3601-0}, pages = {347 -- 354}, language = {en} } @inproceedings{Halbauer, author = {Halbauer, Marcel}, title = {Prozessoptimiertes Fr{\"a}sen mit Industrierobotern f{\"u}r die Produktion von morgen}, series = {Bearbeiten mit Industrierobotern, Technologien, Anwendungen, Hard-/Software, Fraunhofer-IPA-Workshop [F 283], 23. April 2013, Stuttgart}, booktitle = {Bearbeiten mit Industrierobotern, Technologien, Anwendungen, Hard-/Software, Fraunhofer-IPA-Workshop [F 283], 23. April 2013, Stuttgart}, publisher = {FpF - Verein zur F{\"o}rderung Produktionstechnischer Forschung}, address = {Stuttgart}, language = {de} }