@misc{SoltaniZarrinZahariMahadevaiahetal., author = {Soltani Zarrin, Pouya and Zahari, Finn and Mahadevaiah, Mamathamba Kalishettyhalli and P{\´e}rez, Eduardo and Kohlstedt, Hermann and Wenger, Christian}, title = {Neuromorphic on‑chip recognition of saliva samples of COPD and healthy controls using memristive devices}, series = {Scientific Reports}, volume = {10}, journal = {Scientific Reports}, issn = {2045-2322}, doi = {10.1038/s41598-020-76823-7}, abstract = {Chronic Obstructive Pulmonary Disease (COPD) is a life-threatening lung disease, affecting millions of people worldwide. Implementation of Machine Learning (ML) techniques is crucial for the effective management of COPD in home-care environments. However, shortcomings of cloud-based ML tools in terms of data safety and energy efficiency limit their integration with low-power medical devices. To address this, energy efficient neuromorphic platforms can be used for the hardware-based implementation of ML methods. Therefore, a memristive neuromorphic platform is presented in this paper for the on-chip recognition of saliva samples of COPD patients and healthy controls. The results of its performance evaluations showed that the digital neuromorphic chip is capable of recognizing unseen COPD samples with accuracy and sensitivity values of 89\% and 86\%, respectively. Integration of this technology into personalized healthcare devices will enable the better management of chronic diseases such as COPD.}, language = {en} } @misc{ZanottiPuglisiMiloetal., author = {Zanotti, Tommaso and Puglisi, Francesco Maria and Milo, Valerio and P{\´e}rez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Ossorio, {\´O}scar G. and Wenger, Christian and Pavan, Paolo and Olivo, Piero and Ielmini, Daniele}, title = {Reliability of Logic-in-Memory Circuits in Resistive Memory Arrays}, series = {IEEE Transactions on Electron Devices}, volume = {67}, journal = {IEEE Transactions on Electron Devices}, number = {11}, issn = {0018-9383}, doi = {10.1109/TED.2020.3025271}, pages = {4611 -- 4615}, abstract = {Logic-in-memory (LiM) circuits based on resistive random access memory (RRAM) devices and the material implication logic are promising candidates for the development of low-power computing devices that could fulfill the growing demand of distributed computing systems. However, these circuits are affected by many reliability challenges that arise from device nonidealities (e.g., variability) and the characteristics of the employed circuit architecture. Thus, an accurate investigation of the variability at the array level is needed to evaluate the reliability and performance of such circuit architectures. In this work, we explore the reliability and performance of smart IMPLY (SIMPLY) (i.e., a recently proposed LiM architecture with improved reliability and performance) on two 4-kb RRAM arrays based on different resistive switching oxides integrated in the back end of line (BEOL) of the 0.25- μm BiCMOS process. We analyze the tradeoff between reliability and energy consumption of SIMPLY architecture by exploiting the results of an extensive array-level variability characterization of the two technologies. Finally, we study the worst case performance of a full adder implemented with the SIMPLY architecture and benchmark it on the analogous CMOS implementation.}, language = {en} } @misc{ZahariPerezMahadevaiahetal., author = {Zahari, Finn and P{\´e}rez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Kohlstedt, Hermann and Wenger, Christian and Ziegler, Martin}, title = {Analogue pattern recognition with stochastic switching binary CMOS‑integrated memristive devices}, series = {Scientific Reports}, volume = {10}, journal = {Scientific Reports}, issn = {2045-2322}, doi = {10.1038/s41598-020-71334-x}, pages = {15}, abstract = {Biological neural networks outperform todays computer technology in terms of power consumption and computing speed when associative tasks, like pattern recognition, are to be solved. The analogue and massive parallel in-memory computing in biology differs strongly with conventional transistor electronics using the von Neumann architecture. Therefore, novel bio-inspired computing architectures are recently highly investigated in the area of neuromorphic computing. Here, memristive devices, which serve as non-volatile resistive memory, are used to emulate the plastic behaviour of biological synapses. In particular, CMOS integrated resistive random access memory (RRAM) devices are promising candidates to extend conventional CMOS technology in neuromorphic systems. However, dealing with the inherent stochasticity of the resistive switching effect can be challenging for network performance. In this work, the probabilistic switching is exploited to emulate stochastic plasticity with fully CMOS integrated binary RRAM devices. Two different RRAM technologies with different device variabilities are investigated in detail and their use in a stochastic artificial neural network (StochANN) to solve the MINST pattern recognition task is examined. A mixed-signal implementation with hardware synapses and software neurons as well as numerical simulations show the proposed concept of stochastic computing is able to handle analogue data with binary memory cells.}, language = {en} } @misc{PerezAvilaGonzalezCorderoPerezetal., author = {Perez-Avila, Antonio Javier and Gonzalez-Cordero, Gerardo and P{\´e}rez, Eduardo and Perez-Bosch Quesada, Emilio and Mahadevaiah, Mamathamba Kalishettyhalli and Wenger, Christian and Roldan, Juan Bautista and Jimenez-Molinos, Francisco}, title = {Behavioral modeling of multilevel HfO2-based memristors for neuromorphic circuit simulation}, series = {XXXV Conference on Design of Circuits and Integrated Systems (DCIS), Segovia, Spain}, journal = {XXXV Conference on Design of Circuits and Integrated Systems (DCIS), Segovia, Spain}, doi = {10.1109/DCIS51330.2020.9268652}, abstract = {An artificial neural network based on resistive switching memristors is implemented and simulated in LTspice. The influence of memristor variability and the reduction of the continuous range of synaptic weights into a discrete set of conductance levels is analyzed. To do so, a behavioral model is proposed for multilevel resistive switching memristors based on Al-doped HfO2 dielectrics, and it is implemented in a spice based circuit simulator. The model provides an accurate description of the conductance in the different conductive states in addition to describe the device-to-device variability}, language = {en} } @misc{PerezBoschQuesadaRomeroZalizPerezetal., author = {P{\´e}rez-Bosch Quesada, Emilio and Romero-Zaliz, Roc{\´i}o and P{\´e}rez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Reuben, John and Schubert, Markus Andreas and Jim{\´e}nez-Molinos, Francisco and Rold{\´a}n, Juan Bautista and Wenger, Christian}, title = {Toward Reliable Compact Modeling of Multilevel 1T-1R RRAM Devices for Neuromorphic Systems}, series = {Electronics (MDPI)}, volume = {10}, journal = {Electronics (MDPI)}, number = {6}, issn = {2079-9292}, doi = {10.3390/electronics10060645}, pages = {13}, abstract = {In this work, three different RRAM compact models implemented in Verilog-A are analyzed and evaluated in order to reproduce the multilevel approach based on the switching capability of experimental devices. These models are integrated in 1T-1R cells to control their analog behavior by means of the compliance current imposed by the NMOS select transistor. Four different resistance levels are simulated and assessed with experimental verification to account for their multilevel capability. Further, an Artificial Neural Network study is carried out to evaluate in a real scenario the viability of the multilevel approach under study.}, language = {en} } @misc{PechmannMaiVoelkeletal., author = {Pechmann, Stefan and Mai, Timo and V{\"o}lkel, Matthias and Mahadevaiah, Mamathamba Kalishettyhalli and P{\´e}rez, Eduardo and Perez-Bosch Quesada, Emilio and Reichenbach, Marc and Wenger, Christian and Hagelauer, Amelie}, title = {A Versatile, Voltage-Pulse Based Read and Programming Circuit for Multi-Level RRAM Cells}, series = {Electronics}, volume = {10}, journal = {Electronics}, number = {5}, issn = {2079-9292}, doi = {10.3390/electronics10050530}, pages = {17}, abstract = {In this work, we present an integrated read and programming circuit for Resistive Random Access Memory (RRAM) cells. Since there are a lot of different RRAM technologies in research and the process variations of this new memory technology often spread over a wide range of electrical properties, the proposed circuit focuses on versatility in order to be adaptable to different cell properties. The circuit is suitable for both read and programming operations based on voltage pulses of flexible length and height. The implemented read method is based on evaluating the voltage drop over a measurement resistor and can distinguish up to eight different states, which are coded in binary, thereby realizing a digitization of the analog memory value. The circuit was fabricated in the 130 nm CMOS process line of IHP. The simulations were done using a physics-based, multi-level RRAM model. The measurement results prove the functionality of the read circuit and the programming system and demonstrate that the read system can distinguish up to eight different states with an overall resistance ratio of 7.9.}, language = {en} } @misc{PerezPerezAvilaRomeroZalizetal., author = {P{\´e}rez, Eduardo and P{\´e}rez-{\´A}vila, Antonio Javier and Romero-Zaliz, Roc{\´i}o and Mahadevaiah, Mamathamba Kalishettyhalli and P{\´e}rez-Bosch Quesada, Emilio and Roldan, Juan Bautista and Jim{\´e}nez-Molinos, Francisco and Wenger, Christian}, title = {Optimization of Multi-Level Operation in RRAM Arrays for In-Memory Computing}, series = {Electronics (MDPI)}, volume = {10}, journal = {Electronics (MDPI)}, number = {9}, issn = {2079-9292}, doi = {10.3390/electronics10091084}, pages = {15}, abstract = {Accomplishing multi-level programming in resistive random access memory (RRAM) arrays with truly discrete and linearly spaced conductive levels is crucial in order to implement synaptic weights in hardware-based neuromorphic systems. In this paper, we implemented this feature on 4-kbit 1T1R RRAM arrays by tuning the programming parameters of the multi-level incremental step pulse with verify algorithm (M-ISPVA). The optimized set of parameters was assessed by comparing its results with a non-optimized one. The optimized set of parameters proved to be an effective way to define non-overlapped conductive levels due to the strong reduction of the device-to-device variability as well as of the cycle-to-cycle variability, assessed by inter-levels switching tests and during 1k reset-set cycles. In order to evaluate this improvement in real scenarios, the experimental characteristics of the RRAM devices were captured by means of a behavioral model, which was used to simulate two different neuromorphic systems: an 8×8 vector-matrixmultiplication (VMM) accelerator and a 4-layer feedforward neural network for MNIST database recognition. The results clearly showed that the optimization of the programming parameters improved both the precision of VMM results as well as the recognition accuracy of the neural network in about 6\% compared with the use of non-optimized parameters.}, language = {en} } @misc{MiloAnzaloneZambellietal., author = {Milo, Valerio and Anzalone, Francesco and Zambelli, Cristian and P{\´e}rez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Ossorio, {\´O}scar G. and Olivo, Piero and Wenger, Christian and Ielmini, Daniele}, title = {Optimized programming algorithms for multilevel RRAM in hardware neural networks}, series = {IEEE International Reliability Physics Symposium (IRPS), 2021}, journal = {IEEE International Reliability Physics Symposium (IRPS), 2021}, isbn = {978-1-7281-6894-4}, issn = {1938-1891}, doi = {10.1109/IRPS46558.2021.9405119}, abstract = {A key requirement for RRAM in neural network accelerators with a large number of synaptic parameters is the multilevel programming. This is hindered by resistance imprecision due to cycle-to-cycle and device-to-device variations. Here, we compare two multilevel programming algorithms to minimize resistance variations in a 4-kbit array of HfO 2 RRAM. We show that gate-based algorithms have the highest reliability. The optimized scheme is used to implement a neural network with 9-level weights, achieving 91.5\% (vs. software 93.27\%) in MNIST recognition.}, language = {en} } @misc{PetrykDykaPerezetal., author = {Petryk, Dmytro and Dyka, Zoya and P{\´e}rez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Kabin, Ievgen and Wenger, Christian and Langend{\"o}rfer, Peter}, title = {Evaluation of the Sensitivity of RRAM Cells to Optical Fault Injection Attacks}, series = {EUROMICRO Conference on Digital System Design (DSD 2020), Special Session: Architecture and Hardware for Security Applications (AHSA)}, journal = {EUROMICRO Conference on Digital System Design (DSD 2020), Special Session: Architecture and Hardware for Security Applications (AHSA)}, isbn = {978-1-7281-9535-3}, issn = {978-1-7281-9536-0}, doi = {10.1109/DSD51259.2020.00047}, pages = {8}, language = {en} } @misc{PerezMahadevaiahPerezBoschQuesadaetal., author = {P{\´e}rez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Perez-Bosch Quesada, Emilio and Wenger, Christian}, title = {Variability and Energy Consumption Tradeoffs in Multilevel Programming of RRAM Arrays}, series = {IEEE Transactions on Electron Devices}, volume = {68}, journal = {IEEE Transactions on Electron Devices}, number = {6}, issn = {0018-9383}, doi = {10.1109/TED.2021.3072868}, pages = {2693 -- 2698}, abstract = {Achieving a reliable multi-level programming operation in resistive random access memory (RRAM) arrays is still a challenging task. In this work, we assessed the impact of the voltage step value used by the programming algorithm on the device-to-device (DTD) variability of the current distributions of four conductive levels and on the energy consumption featured by programming 4-kbit HfO2-based RRAM arrays. Two different write-verify algorithms were considered and compared, namely, the incremental gate voltage with verify algorithm (IGVVA) and the incremental step pulse with verify algorithm (ISPVA). By using the IGVVA, a main trade-off has to be taken into account since reducing the voltage step leads to a smaller DTD variability at the cost of a strong increase in the energy consumption. Although the ISPVA can not reduce the DTD variability as much as the IGVVA, its voltage step can be decreased in order to reduce the energy consumption with almost no impact on the DTD variability. Therefore, the final decision on which algorithm to employ should be based on the specific application targeted for the RRAM array.}, language = {en} } @misc{OssorioVinuesaGarciaetal., author = {Ossorio, {\´O}scar G. and Vinuesa, Guillermo and Garcia, Hector and Sahelices, Benjamin and Due{\~n}as, Salvador and Cast{\´a}n, Helena and P{\´e}rez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Wenger, Christian}, title = {Performance Assessment of Amorphous HfO2-based RRAM Devices for Neuromorphic Applications}, series = {ECS Transactions}, volume = {102}, journal = {ECS Transactions}, number = {2}, issn = {1938-6737}, doi = {10.1149/10202.0029ecst}, pages = {29 -- 35}, abstract = {The use of thin layers of amorphous hafnium oxide has been shown to be suitable for the manufacture of Resistive Random-Access memories (RRAM). These memories are of great interest because of their simple structure and non-volatile character. They are particularly appealing as they are good candidates for substituting flash memories. In this work, the performance of the MIM structure that takes part of a 4 kbit memory array based on 1-transistor-1-resistance (1T1R) cells was studied in terms of control of intermediate states and cycle durability. DC and small signal experiments were carried out in order to fully characterize the devices, which presented excellent multilevel capabilities and resistive-switching behavior.}, language = {en} } @misc{PerezBoschQuesadaPerezMahadevaiahetal., author = {Perez-Bosch Quesada, Emilio and P{\´e}rez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Wenger, Christian}, title = {Memristive-based in-memory computing: from device to large-scale CMOS integration}, series = {Neuromorphic Computing and Engineering}, volume = {1}, journal = {Neuromorphic Computing and Engineering}, number = {2}, issn = {2634-4386}, doi = {10.1088/2634-4386/ac2cd4}, pages = {8}, abstract = {With the rapid emergence of in-memory computing systems based on memristive technology, the integration of such memory devices in large-scale architectures is one of the main aspects to tackle. In this work we present a study of HfO2-based memristive devices for their integration in large-scale CMOS systems, namely 200 mm wafers. The DC characteristics of single metal-insulator-metal devices are analyzed taking under consideration device-to-device variabilities and switching properties. Furthermore, the distribution of the leakage current levels in the pristine state of the samples are analyzed and correlated to the amount of formingless memristors found among the measured devices. Finally, the obtained results are fitted into a physic-based compact model that enables their integration into larger-scale simulation environments.}, language = {en} } @misc{MahadevaiahPerezLiskeretal., author = {Mahadevaiah, Mamathamba Kalishettyhalli and P{\´e}rez, Eduardo and Lisker, Marco and Schubert, Markus Andreas and Perez-Bosch Quesada, Emilio and Wenger, Christian and Mai, Andreas}, title = {Modulating the Filamentary-Based Resistive Switching Properties of HfO2 Memristive Devices by Adding Al2O3 Layers}, series = {Electronics : open access journal}, volume = {11}, journal = {Electronics : open access journal}, number = {10}, issn = {2079-9292}, doi = {10.3390/electronics11101540}, pages = {14}, abstract = {The resistive switching properties of HfO2 based 1T-1R memristive devices are electrically modified by adding ultra-thin layers of Al2O3 into the memristive device. Three different types of memristive stacks are fabricated in the 130 nm CMOS technology of IHP. The switching properties of the memristive devices are discussed with respect to forming voltages, low resistance state and high resistance state characteristics and their variabilities. The experimental I-V characteristics of set and reset operations are evaluated by using the quantum point contact model. The properties of the conduction filament in the on and off states of the memristive devices are discussed with respect to the model parameters obtained from the QPC fit.}, language = {en} } @misc{PerezMahadevaiahPerezBoschQuesadaetal., author = {P{\´e}rez, Eduardo and Mahadevaiah, Mamathamba Kalishettyhalli and Perez-Bosch Quesada, Emilio and Wenger, Christian}, title = {In-depth characterization of switching dynamics in amorphous HfO2 memristive arrays for the implementation of synaptic updating rules}, series = {Japanese Journal of Applied Physics}, volume = {61}, journal = {Japanese Journal of Applied Physics}, issn = {0021-4922}, doi = {10.35848/1347-4065/ac6a3b}, pages = {1 -- 7}, abstract = {Accomplishing truly analog conductance modulation in memristive arrays is crucial in order to implement the synaptic plasticity in hardware-based neuromorphic systems. In this paper, such a feature was addressed by exploiting the inherent stochasticity of switching dynamics in amorphous HfO2 technology. A thorough statistical analysis of experimental characteristics measured in 4 kbit arrays by using trains of identical depression/potentiation pulses with different voltage amplitudes and pulse widths provided the key to develop two different updating rules and to define their optimal programming parameters. The first rule is based on applying a specific number of identical pulses until the conductance value achieves the desired level. The second one utilized only one single pulse with a particular amplitude to achieve the targeted conductance level. In addition, all the results provided by the statistical analysis performed may play an important role in understanding better the switching behavior of this particular technology.}, language = {en} } @misc{PerezMaldonadoPerezBoschQuesadaetal., author = {P{\´e}rez, Eduardo and Maldonado, David and Perez-Bosch Quesada, Emilio and Mahadevaiah, Mamathamba Kalishettyhalli and Jimenez-Molinos, Francisco and Wenger, Christian}, title = {Parameter Extraction Methods for Assessing Device-to-Device and Cycle-to-Cycle Variability of Memristive Devices at Wafer Scale}, series = {IEEE Transactions on Electron Devices}, volume = {70}, journal = {IEEE Transactions on Electron Devices}, number = {1}, issn = {0018-9383}, doi = {10.1109/TED.2022.3224886}, pages = {360 -- 365}, abstract = {The stochastic nature of the resistive switching (RS) process in memristive devices makes device-to-device (DTD) and cycle-to-cycle (CTC) variabilities relevant magnitudes to be quantified and modeled. To accomplish this aim, robust and reliable parameter extraction methods must be employed. In this work, four different extraction methods were used at the production level (over all the 108 devices integrated on 200-mm wafers manufactured in the IHP 130-nm CMOS technology) in order to obtain the corresponding collection of forming, reset, and set switching voltages. The statistical analysis of the experimental data (mean and standard deviation (SD) values) was plotted by using heat maps, which provide a good summary of the whole data at a glance and, in addition, an easy manner to detect inhomogeneities in the fabrication process.}, language = {en} } @misc{DoraiSwamyReddyPerezBaronietal., author = {Dorai Swamy Reddy, Keerthi and P{\´e}rez, Eduardo and Baroni, Andrea and Mahadevaiah, Mamathamba Kalishettyhalli and Marschmeyer, Steffen and Fraschke, Mirko and Lisker, Marco and Wenger, Christian and Mai, Andreas}, title = {Optimization of technology processes for enhanced CMOS-integrated 1T-1R RRAM device performance}, series = {The European Physical Journal B}, volume = {97}, journal = {The European Physical Journal B}, publisher = {Springer Science and Business Media LLC}, issn = {1434-6028}, doi = {10.1140/epjb/s10051-024-00821-1}, pages = {9}, abstract = {Implementing artificial synapses that emulate the synaptic behavior observed in the brain is one of the most critical requirements for neuromorphic computing. Resistive random-access memories (RRAM) have been proposed as a candidate for artificial synaptic devices. For this applicability, RRAM device performance depends on the technology used to fabricate the metal-insulator-metal (MIM) stack and the technology chosen for the selector device. To analyze these dependencies, the integrated RRAM devices in a 4k-bit array are studied on a 200 mm wafer scale in this work. The RRAM devices are integrated into two different CMOS transistor technologies of IHP, namely 250 nm and 130 nm and the devices are compared in terms of their pristine state current. The devices in 130 nm technology have shown lower number of high pristine state current devices per die in comparison to the 250 nm technology. For the 130 nm technology, the forming voltage is reduced due to the decrease of HfO2 dielectric thickness from 8 nm to 5 nm. Additionally, 5\% Al-doped 4 nm HfO2 dielectric displayed a similar reduction in forming voltage and a lower variation in the values. Finally, the multi-level switching between the dielectric layers in 250 nm and 130 nm technologies are compared, where 130 nm showed a more significant number of conductance levels of seven compared to only four levels observed in 250 nm technology.}, language = {en} } @misc{PerezBoschQuesadaMahadevaiahRizzietal., author = {Perez-Bosch Quesada, Emilio and Mahadevaiah, Mamathamba Kalishettyhalli and Rizzi, Tommaso and Wen, Jianan and Ulbricht, Markus and Krstic, Milos and Wenger, Christian and P{\´e}rez, Eduardo}, title = {Experimental Assessment of Multilevel RRAM-based Vector-Matrix Multiplication Operations for In-Memory Computing}, series = {IEEE Transactions on Electron Devices}, volume = {70}, journal = {IEEE Transactions on Electron Devices}, number = {4}, issn = {0018-9383}, doi = {10.1109/TED.2023.3244509}, pages = {2009 -- 2014}, abstract = {Resistive random access memory (RRAM)-based hardware accelerators are playing an important role in the implementation of in-memory computing (IMC) systems for artificial intelligence applications. The latter heavily rely on vector-matrix multiplication (VMM) operations that can be efficiently boosted by RRAM devices. However, the stochastic nature of the RRAM technology is still challenging real hardware implementations. To study the accuracy degradation of consecutive VMM operations, in this work we programed two RRAM subarrays composed of 8x8 one-transistor-one-resistor (1T1R) cells following two different distributions of conductive levels. We analyze their robustness against 1000 identical consecutive VMM operations and monitor the inherent devices' nonidealities along the test. We finally quantize the accuracy loss of the operations in the digital domain and consider the trade-offs between linearly distributing the resistive states of the RRAM cells and their robustness against nonidealities for future implementation of IMC hardware systems.}, language = {en} } @misc{MaldonadoCantudoPerezetal., author = {Maldonado, David and Cantudo, Antonio and P{\´e}rez, Eduardo and Romero-Zaliz, Rocio and Perez-Bosch Quesada, Emilio and Mahadevaiah, Mamathamba Kalishettyhalli and Jimenez-Molinos, Francisco and Wenger, Christian and Roldan, Juan Bautista}, title = {TiN/Ti/HfO2/TiN Memristive Devices for Neuromorphic Computing: From Synaptic Plasticity to Stochastic Resonance}, series = {Frontiers in Neuroscience}, volume = {17}, journal = {Frontiers in Neuroscience}, issn = {1662-4548}, doi = {10.3389/fnins.2023.1271956}, abstract = {We characterize TiN/Ti/HfO2/TiN memristive devices for neuromorphic computing. We analyze different features that allow the devices to mimic biological synapses and present the models to reproduce analytically some of the data measured. In particular, we have measured the spike timing dependent plasticity behavior in our devices and later on we have modeled it. The spike timing dependent plasticity model was implemented as the learning rule of a spiking neural network that was trained to recognize the MNIST dataset. Variability is implemented and its influence on the network recognition accuracy is considered accounting for the number of neurons in the network and the number of training epochs. Finally, stochastic resonance is studied as another synaptic feature.It is shown that this effect is important and greatly depends on the noise statistical characteristics.}, language = {en} } @misc{PerezBoschQuesadaRizziGuptaetal., author = {Perez-Bosch Quesada, Emilio and Rizzi, Tommaso and Gupta, Aditya and Mahadevaiah, Mamathamba Kalishettyhalli and Schubert, Andreas and Pechmann, Stefan and Jia, Ruolan and Uhlmann, Max and Hagelauer, Amelie and Wenger, Christian and P{\´e}rez, Eduardo}, title = {Multi-Level Programming on Radiation-Hard 1T1R Memristive Devices for In-Memory Computing}, series = {14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023}, journal = {14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, isbn = {979-8-3503-0240-0}, doi = {10.1109/CDE58627.2023.10339525}, pages = {4}, abstract = {This work presents a quasi-static electrical characterization of 1-transistor-1-resistor memristive structures designed following hardness-by-design techniques integrated in the CMOS fabrication process to assure multi-level capabilities in harsh radiation environments. Modulating the gate voltage of the enclosed layout transistor connected in series with the memristive device, it was possible to achieve excellent switching capabilities from a single high resistance state to a total of eight different low resistance states (more than 3 bits). Thus, the fabricated devices are suitable for their integration in larger in-memory computing systems and in multi-level memory applications. Index Terms—radiation-hard, hardness-by-design, memristive devices, Enclosed Layout Transistor, in-memory computing}, language = {en} } @misc{PerezMaldonadoMahadevaiahetal., author = {P{\´e}rez, Eduardo and Maldonado, David and Mahadevaiah, Mamathamba Kalishettyhalli and Perez-Bosch Quesada, Emilio and Cantudo, Antonio and Jimenez-Molinos, Francisco and Wenger, Christian and Roldan, Juan Bautista}, title = {A comparison of resistive switching parameters for memristive devices with HfO2 monolayers and Al2O3/HfO2 bilayers at the wafer scale}, series = {14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023}, journal = {14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, isbn = {979-8-3503-0240-0}, doi = {10.1109/CDE58627.2023.10339417}, pages = {5}, abstract = {Memristive devices integrated in 200 mm wafers manufactured in 130 nm CMOS technology with two different dielectrics, namely, a HfO2 monolayer and an Al2O3/HfO2 bilayer, have been measured. The cycle-to-cycle (C2C) and device-todevice (D2D) variability have been analyzed at the wafer scale using different numerical methods to extract the set (Vset) and reset (Vreset) voltages. Some interesting differences between both technologies were found in terms of switching characteristics}, language = {en} }