@misc{LazarevaKovalMuelleretal., author = {Lazareva, I. and Koval, Yuri and M{\"u}ller, P. and M{\"u}ller, Klaus and Henkel, Karsten and Schmeißer, Dieter}, title = {Interface screening and imprint in pol(vinylidene fluoride/trifluoroethylene) ferroelectric field effect transistors}, language = {en} } @misc{MuellerTorgerAllertzetal., author = {M{\"u}ller, Felix and Torger, Bernhard and Allertz, Peter J. and J{\"a}hnichen, Klaus and Keßler, Stefan and M{\"u}ller, Martin and Simon, Frank and Salchert, Katrin and M{\"a}urer, Haike and Pospiech, Doris}, title = {Multifunctional crosslinkable itaconic acid copolymers for enzyme immobilization}, series = {European Polymer Journal}, volume = {102}, journal = {European Polymer Journal}, doi = {10.1016/j.eurpolymj.2018.03.014}, pages = {47 -- 55}, abstract = {UV-Crosslinkable itaconic copolymers are developed to provide new multifunctional materials for coatings which combine crosslinkable functionalities and the possibility to immobilize enzymes. The polymer-immobilized enzymes were used for water treatment to decompose persistent organic molecules. Introduction of suitable comonomers allows tailoring the mechanical and chemical properties for special applications. Copolymers containing MMA and itaconic anhydride were chosen because of the formation of long-term stable anhydride functionalities. These anhydride functionalities are employed to attach enzymes covalently. 4-Benzoylphenyl methacrylate is used as comonomer for UV-initiated crosslinking. Terpolymers are successfully obtained by radical copolymerization in solution. The copolymers are compared to poly(ethylene-alt-maleic anhydride) [P(EMA)] often used with respect to enzyme immobilization, activity and hydrolytic stability. The hydrolysis stability of the copolymers against water is studied by ATR-FTIR spectroscopy. Thin films are prepared on glass substrates in a layer-by-layer procedure by spin-coating. The layer formation is monitored by ATR-FTIR spectroscopy. UV-crosslinking of the copolymer films is performed taking the optimal irradiation dose that avoids polymer degradation. ATR-FTIR spectroscopy verifies the coupling reaction between amino groups of the enzyme and the anhydride groups on the surface of the crosslinked polymer film. The syringaldazine (4-hydroxy-3,5-dimethoxybenzaldehyde azine) test and 2,2´-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) assay demonstrate that the immobilized enzymes maintain their activities. The functional copolymers showed a significant effect in reduction of persistent organic pollutants in contaminated waste water.}, language = {de} } @misc{KovalLazarevaMuelleretal., author = {Koval, Yuri and Lazareva, I. and M{\"u}ller, P. and M{\"u}ller, Klaus and Henkel, Karsten and Friedrich, Daniel}, title = {Field effect transistors on graphitized polymer surfaces}, language = {en} } @inproceedings{SchmeisserMuellerHenkeletal., author = {Schmeißer, Dieter and M{\"u}ller, Sebastian and Henkel, Karsten and M{\"u}ller, Klaus and Wehner, Stefan}, title = {In-situ analysis of moving reaction fronts for the bistable CO oxidation reaction on noble metal catalyst}, series = {Extended Abstracts Book of First International Conference on Materials for Energy}, booktitle = {Extended Abstracts Book of First International Conference on Materials for Energy}, publisher = {Dechema e.V.}, address = {Frankfurt}, isbn = {978-3-89746-117-8}, pages = {S. 932}, abstract = {Experimental data on the reaction kinetics of catalytic processes are prerequisite for modeling of such reactions and their output. We investigate the CO oxidation on some noble metal catalysts, like Iridium(111) and Palladium(111) which is a bistable surface reaction. In a specific range of CO content in the feed gas islands of one or the other adsorbate nucleate and grow, which is recorded with photo electron emission microscopy (PEEM). During these transients the coverage on the surface changes from predominantly oxygen covered to predominantly CO covered resp. vice versa. But the resolution of PEEM and especially its unknown and nonlinear dependence of coverage of the two adsorbates (oxygen and CO) and image intensity make it impossible to extract the changes in coverage. On the other hand the reaction diffusion model based on the Langmuir-Hinshelwood-mechanism delivers the coverage of oxygen and carbon monoxide. The shapeand wall velocity of those islands has been connected perfectly to each other [CPL 423 (2006) 39], but not the absolute coverage and their variation during the reaction. Since the domain wall velocity is small on Iridium(111), this has opened the possibility for a detailed analysis of the changing coverage inside this domain wallutilizing synchrotron radiation and photo electron spectroscopy at BESSY II. The coverage profile of oxygen and CO inside a moving domain wall was measured for both cases using XPS spectra at O1s, C1s and the valence band during thereaction. Comparison with the reaction-diffusion-model and other catalytic surfaces, like Palladium(111) are done.}, language = {en} } @misc{HenkelLazarevaMandaletal., author = {Henkel, Karsten and Lazareva, I. and Mandal, Dipankar and Paloumpa, Ioanna and M{\"u}ller, Klaus and Koval, Yuri and M{\"u}ller, P. and Schmeißer, Dieter}, title = {Electrical investigations on metal/ferroelectric/insulator/semiconductor structures using Poly[vinylidene fluoride trifluoroethylene] as ferroelectric layer for organic nonvolatile memory applications}, language = {en} } @inproceedings{LazarevaKovalMuelleretal., author = {Lazareva, I. and Koval, Yuri and M{\"u}ller, P. and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Field effect transistor of graphitized polyimide with P(VDF-TrFE) as gate insulator}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 43}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 43}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 195}, abstract = {Surfaces of polyimide films were graphitized by low-energy ion irradiation. The conductivity was between 10-5 to 200 S/cm [1]. We prepared field effect transistors using this material. Ferroelectric P(VDF-TrFE) was used as gate insulator. The thickness of P(VDF-TrFE) varied from 120 nm to 1200 nm. Properties of P(VDF-TrFE) were investigated by current-voltage measurements of metal/ P(VDF-TrFE)/metal capacitors. We have found that at room temperature, the coercive field of P(VDF-TrFE) does not depend on the film thickness. At lower temperatures the coercive field increases proportionally to the reciprocal temperature. Remnant polarization is 9.5 µC/cm2. It slightly rises with decreasing temperature. Our recent results of field effect mobility, carrier concentration and threshold voltage are presented. [1] I. Lazareva, Y. Koval, M. Alam, S. Str{\"o}msd{\"o}rfer, P. M{\"u}ller, Appl. Phys. Lett. 90, 262108 (2007)}, language = {en} } @misc{NeyretLeProvostBoesingetal., author = {Neyret, Margot and Le Provost, Ga{\"e}tane and Boesing, Andrea Larissa and Schneider, Florian D. and Baulechner, Dennis and Bergmann, Joana and Vries, Franciska T. de and Fiore-Donno, Anna Maria and Geisen, Stefan and Goldmann, Kezia and Merges, Anna and Saifutdinov, Ruslan A. and Simons, Nadja K. and Tobias, Joseph A. and Zaitsev, Andrey S. and Gossner, Martin M. and Jung, Kirsten and Kandeler, Ellen and Krauss, Jochen and Penone, Caterina and Schloter, Michael and Schulz, Stefanie and Staab, Michael and Wolters, Volkmar and Apostolakis, Antonios and Birkhofer, Klaus and Boch, Steffen and Boeddinghaus, Runa S. and Bolliger, Ralph and Bonkowski, Michael and Buscot, Fran{\c{c}}ois and Dumack, Kenneth and Fischer, Markus and Gan, Huei Ying and Heinze, Johannes and H{\"o}lzel, Norbert and John, Katharina and Klaus, Valentin H. and Kleinebecker, Till and Marhan, Sven and M{\"u}ller, J{\"o}rg and Renner, Swen C. and Rillig, Matthias C. and Schenk, No{\"e}lle V. and Sch{\"o}ning, Ingo and Schrumpf, Marion and Seibold, Sebastian and Socher, Stephanie A. and Solly, Emily F. and Teuscher, Miriam and Kleunen, Mark van and Wubet, Tesfaye and Manning, Peter}, title = {A slow-fast trait continuum at the whole community level in relation to land-use intensification}, series = {Nature Communications}, volume = {15}, journal = {Nature Communications}, number = {1}, issn = {2041-1723}, doi = {10.1038/s41467-024-45113-5}, abstract = {AbstractOrganismal functional strategies form a continuum from slow- to fast-growing organisms, in response to common drivers such as resource availability and disturbance. However, whether there is synchronisation of these strategies at the entire community level is unclear. Here, we combine trait data for 2800 above- and belowground taxa from 14 trophic guilds spanning a disturbance and resource availability gradient in German grasslands. The results indicate that most guilds consistently respond to these drivers through both direct and trophically mediated effects, resulting in a 'slow-fast' axis at the level of the entire community. Using 15 indicators of carbon and nutrient fluxes, biomass production and decomposition, we also show that fast trait communities are associated with faster rates of ecosystem functioning. These findings demonstrate that 'slow' and 'fast' strategies can be manifested at the level of whole communities, opening new avenues of ecosystem-level functional classification.}, language = {en} } @misc{BochAllanBirkhoferetal., author = {Boch, Steffen and Allan, Eric and Birkhofer, Klaus and Bossdorf, Oliver and Bl{\"u}thgen, Nico and Christ-Breulmann, Sabina and Diek{\"o}tter, Tim and Dormann, Carsten F. and Gossner, Martin M. and Hallmann, Christine and Hemp, Andreas and H{\"o}lzel, Norbert and Jung, Kirsten and Klaus, Valentin H. and Klein, Alexandra M. and Kleinebecker, Till and Lange, Markus and M{\"u}ller, J{\"o}rg and Nacke, Heiko and Prati, Daniel and Renner, Swen C. and Rothenw{\"o}hrer, Christoph and Schall, Peter and Schulze, Ernst-Detlef and Socher, Stephanie A. and Tscharntke, Teja and T{\"u}rke, Manfred and Weiner, Christiane N. and Weisser, Wolfgang W. and Westphal, Catrin and Wolters, Volkmar and Wubet, Tesfaye and Fischer, Markus}, title = {Extensive und j{\"a}hrlich wechselnde Nutzungsintensit{\"a}t f{\"o}rdert den Artenreichtum im Gr{\"u}nland}, series = {ANLIEGEN NATUR}, volume = {38}, journal = {ANLIEGEN NATUR}, number = {1}, issn = {1864-0729}, pages = {86 -- 95}, language = {de} } @misc{MuellerPaloumpaHenkeletal., author = {M{\"u}ller, Klaus and Paloumpa, Ioanna and Henkel, Karsten and Schmeißer, Dieter}, title = {A polymer high-k dielectric insulator for organic field effect Transistors}, series = {Journal of Applied Physics}, volume = {98}, journal = {Journal of Applied Physics}, number = {5}, issn = {0021-8979}, pages = {S. 056104}, language = {en} } @misc{SchmeisserHenkelMuelleretal., author = {Schmeißer, Dieter and Henkel, Karsten and M{\"u}ller, Klaus and Tallarida, Massimo}, title = {Interface Reactions in Ultrathin Functional Dielectric Films}, language = {en} } @incollection{MuellerBurkovMandaletal., author = {M{\"u}ller, Klaus and Burkov, Yevgen and Mandal, Dipankar and Henkel, Karsten and Paloumpa, Ioanna and Goryachko, Andriy and Schmeißer, Dieter}, title = {Microscopic and spectroscopic characterization of interfaces and dielectric layers for OFET devices}, series = {Organic Electronics : structural and Electronic Properties of OFETs}, booktitle = {Organic Electronics : structural and Electronic Properties of OFETs}, editor = {W{\"o}ll, Christof}, publisher = {Wiley-VCH}, address = {Weinheim}, isbn = {978-3-527-40810-8}, pages = {445 -- 468}, language = {en} } @article{Mueller, author = {M{\"u}ller, Klaus}, title = {PEEM studies of KCN-etched CuInS2 surfaces}, language = {de} } @misc{HenkelSohalTorcheetal., author = {Henkel, Karsten and Sohal, Rakesh and Torche, Mohamed and Paloumpa, Ioanna and M{\"u}ller, Klaus and Hoffmann, Patrick and Schmeißer, Dieter}, title = {Grenzfl{\"a}chenoptimierung f{\"u}r funktionale D{\"u}nnschichtsysteme: Oxide und Polymere}, series = {Forum der Forschung}, volume = {9}, journal = {Forum der Forschung}, number = {18}, issn = {0947-6989}, pages = {49 -- 56}, language = {de} } @article{MuellerBurkovSchmeisser, author = {M{\"u}ller, Klaus and Burkov, Yevgen and Schmeißer, Dieter}, title = {Photo-Emission-Electron-Microscopy for Characterization of an Operating Organic Electronic Device}, language = {en} } @misc{MuellerHenkelMandaletal., author = {M{\"u}ller, Klaus and Henkel, Karsten and Mandal, Dipankar and Seime, Bernd and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Spin coated organic ferroelectric films for non volatile memories}, language = {en} } @misc{MandalHenkelMuelleretal., author = {Mandal, Dipankar and Henkel, Karsten and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Band gab determination of P(VDF-TrFE) copolymer film by electron energy loss spectroscopy}, language = {en} } @misc{WalterKeulerBlocketal., author = {Walter, Andreas and Keuler, Klaus and Block, Alexander and Knoche, Richard and Block, Alexander and Kotlarski, Sven and M{\"u}ller-Westermeier, Gerhard and Rechid, Diana and Ahrens, Wilfried}, title = {A high resolution reference data set of german wind velocity 1951-2001 and comparison with regional climate model results}, series = {Meteorologische Zeitschrift}, volume = {15}, journal = {Meteorologische Zeitschrift}, number = {6}, issn = {1610-1227}, doi = {10.1127/0941-2948/2006/0162}, pages = {585 -- 596}, language = {en} } @inproceedings{RichterFriedrichPhilipetal., author = {Richter, Matthias and Friedrich, Daniel and Philip, Shine and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Study of P3HT/PCBM based films by NEXAFS}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 194}, abstract = {In this contribution we report on investigations of the electronic structure and composition of regioregular poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) based films by using Near Edge X-Ray Absorption Fine Structure (NEXAFS). The measurements were done at the U49/2-PGM2 beam line of BESSY II, Berlin using TEY (total electron yield) and TFY (total fluorescence yield) detection. The samples were produced by spin casting a mixture of P3HT (dissolved in chloroform) and PCBM (dissolved in chlorobenzene) on ITO (indium tin oxide) coated glass slides. Measurements of pure P3HT and PCBM show all typical excitations, whereas the blended system is a weighted superposition of the related peaks. Analyzing these weighted superposition, we observe in the surface sensitive TEY data an accumulation of P3HT, whereas in the bulk sensitive TFY signal an as expected mixture is found. We also show angular dependent NEXAFS measurements of the P3HT/PCBM blend in order to measure the orientation and distribution of the P3HT polymer. Additionally, we will show a new approach for organic solar cell application by introducing ferroelectric nanoparticles into the mixture.}, language = {en} } @inproceedings{MuellerMilkoBurkovetal., author = {M{\"u}ller, Klaus and Milko, Sergey and Burkov, Yevgen and Schmeißer, Dieter}, title = {Mischkristalle des Systems ZnS-CuInS2 f{\"u}r multispektrale Solarzellen}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {Wir haben CuInS2 (CIS) unterschiedlicher Herstellung (Koverdampfung, Sputtern, Pulsed Laser Deposition, CIS auf Kupferband aufgebracht) untersucht. Neben Tiefenprofilen (durch Sputtern) der Elementverteilung dieser Proben wurden der Einfluss der Temperatur, von aufgedampftem Kupfer und Indium, ebenfalls bei verschiedenen Temperaturen, auf das Verhalten der St{\"o}chiometrie mit spektroskopischen Methoden (XPS, UPS) studiert. Parallel dazu wurde das Verhalten von im Vakuum aufgedampften ZnS und die entsprechenden Oberfl{\"a}chenreaktionen in Abh{\"a}ngigkeit von der Temperatur untersucht und charakterisiert, so dass Aussagen {\"u}ber die Optimierung und Anpassung von Pr{\"a}parationsbedingungen und Parametern zur Herstellung von erstens reinem CIS und zweitens von Mischkristallen des Typs Zn2-xCuxInxS2 m{\"o}glich werden. Zwischen den beiden Endgliedern ZnS und CuInS2 besteht bis auf einen Phasen{\"u}bergang bei etwa 80\% CIS l{\"u}ckenlose Mischbarkeit gem{\"a}ss Zn2-xCuxInxS2 (Bente: Chem.Erde (1991)). Die elektronische Bandl{\"u}cke dieser Mischkristalle l{\"a}sst sich im Vergleich zu reinem CuInS2 in einem Bereich von 3,67 eV (ZnS) bis 1,55 eV (CuInS2) variieren. Damit besteht die M{\"o}glichkeit, durch kontrollierte {\"A}nderung der Zusammensetzung der Schichten die Effizienz von Solarzellen aus diesem Material zu optimieren.}, language = {de} } @misc{BirkhoferDiehlAnderssonetal., author = {Birkhofer, Klaus and Diehl, Eva and Andersson, Jesper and Ekroos, Johan and Fr{\"u}h-M{\"u}ller, Andrea and Machnikowski, Franziska and Mader, Viktoria and Nilsson, Lovisa and Sasaki, Keiko and Rundl{\"o}f, Maj and Wolters, Volkmar and Smith, Henrik G.}, title = {Ecosystem services - current challenges and opportunities for ecological research}, series = {Frontiers in Ecology and Evolution}, volume = {2}, journal = {Frontiers in Ecology and Evolution}, issn = {2296-701X}, doi = {10.3389/fevo.2014.00087}, pages = {35}, language = {en} } @misc{HeitmannGlemnitzBirkhoferetal., author = {Heitmann, Nadja and Glemnitz, Michael and Birkhofer, Klaus and M{\"u}ller, Marina E. H.}, title = {Unselective Transport of Phytopathogenic Fusarium Fungi from Litter and Soil by Ground-Dwelling Arthropods Links Semi-Natural and Agricultural Habitats}, series = {Microorganisms}, volume = {10}, journal = {Microorganisms}, number = {2}, issn = {2076-2607}, doi = {10.3390/microorganisms10020335}, abstract = {The dispersal of propagules, such as fungal spores or seeds by actively moving animals, connects and shapes communities. The dispersal of plant pathogens by arthropods might be a crucial mechanism in the spread of several crop diseases. Ground-dwelling arthropods are potential linkers between fungal communities in semi-natural and agricultural habitats by transporting propagules of Fusarium fungi. We compared the Fusarium communities on the body surface of ground-dwelling arthropods with litter in semi-natural and soil in agricultural habitats with a focus on the Fusarium community. We found three relatively distinct Fusarium communities with moderate overlap. We detected a higher richness of Fusarium species on the body surface of arthropods compared to litter and soil communities. The results suggest that the Fusarium community on the body surface of arthropods relates to the composition observed in litter and soil with limited filtering mechanisms between communities. Ground-dwelling arthropods are relevant agents for the distribution of Fusarium and therefore link fungal communities in adjacent habitats.}, language = {en} } @misc{SchmeisserMuellerHenkel, author = {Schmeißer, Dieter and M{\"u}ller, Klaus and Henkel, Karsten}, title = {Photosensitive and Rectifying Properties of Ga2O3 Described by Polaronic Screened Electrons and Internal Potentials}, series = {Journal of Physical Chemistry C}, volume = {127}, journal = {Journal of Physical Chemistry C}, number = {47}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.3c05785}, pages = {23077 -- 23089}, abstract = {The photosensitive and rectifying properties of Ga2O3 are described by (n-type) intrinsic (π-) electrons. These polaronic screened multiatomic carriers populate the intrinsic defect states within the ionic gap; their spectroscopic evidence is based on resonant photoemission spectroscopy data that also provide the ionicity factor of Ga2O3 and the size of the ionic gap. The π-electron density depends on the internal potential and its photo- and field-induced dipole contributions, and it describes the observed combined ohmic-exponential carrier densities and current-voltage dependences. The π-electron dynamics is caused by pairing and dissociation dipoles in the bulk of Ga2O3. The material properties of the electrode contribute via external chemical potentials and define the criteria for ohmic and rectifying contacts. This quantitative and predictive concept not only convinces by perfect agreement with published experimental data but also points toward the achievable performance limits of UV absorbers and rectifying devices.}, language = {en} } @inproceedings{RachowHagendorfMuelleretal., author = {Rachow, Fabian and Hagendorf, Moritz and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Synthesis of Methanol from CO2 for Power-to-Liquid applications}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, pages = {S. 256}, abstract = {The direct synthesis of methanol [CO2+3H2->CH3OH+H2O] represent a possibility to reduce the global CO2-emission by recycling the CO2 and also to store excess energy from renewable energy sources into a common fuel or chemical feedstock (Power-to-Liquid). For an acceptable conversion rate of CO2 a catalyst is needed, together with high temperatures (>200°C) and high pressure (50-200bar). Methanol is normally produced form synthesis gas, a mixture of CO and H2. By directly using CO2 for the exothermic reaction, we avoid the conversion of CO2 to CO by the reversed water gas shift reaction. We also present new concepts for the conversion from CO2-rich flue gases, eliminating the need for a separation of the CO2. The concept is backed up by measurements in laboratory scale. Here we use a Cu-ZnO catalyst on a ZrO2 substrate prepared by impregnation and compare the results with commercially available catalysts. We achieved a conversion of around 7\% and a selectivity of 60\% at a temperature of 240°C and 45bar. The reaction is thermodynamically limited with a maximum conversion rate of 15\% at 250°C and 50bar. The conversion and the selectivity towards methanol is highly influenced by the catalyst used, the temperature, the pressure as well as the flow rate of the reactants.}, language = {en} } @inproceedings{IsraelRachowSchwiertzetal., author = {Israel, Johannes and Rachow, Fabian and Schwiertz, Carola and Charlafti, Evgenia and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Direct CO2-Methanation of flue gas emitted by conventional power plants}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, pages = {S. 255}, abstract = {The catalytic conversion of CO2 with H2 into CH4 is possible by the Sabatier reaction CO2+4H2→CH4+2H2O. Using excess energy from renewable electricity generation, this approach offers an opportunity for recycling of CO2 as synthetic natural gas. In a new concept, we investigate the performance of the Sabatier reaction as direct methanation of flue gas, emitted by conventional power plants. We investigate the Sabatier process in an upscaled system, with a maximum input flow rate of 45 Nm3/h Gas. The performance is investigated in a simulated composition of flue gas and under real conditions at a lignite power plant in Schwarze Pumpe, Brandenburg, Germany. We can achieve a CO2-conversion of up to 90\%, with approx. 100\% selectivity towards CH4. Under flue gas conditions and at a certain limit of gas flow the system is operated at an autothermal running modus, a steady state equilibrium of exothermic heat production and thermal flow that needs neither external annealing nor cooling.}, language = {en} } @incollection{MuellerIsraelRachowetal., author = {M{\"u}ller, Klaus and Israel, Johannes and Rachow, Fabian and Schmeißer, Dieter}, title = {Sabatier-Based Direct Synthesis of Methane and Methanol Using CO2 from Industrial Gas Mixtures}, series = {Engineering Solutions for CO2 Conversion}, booktitle = {Engineering Solutions for CO2 Conversion}, editor = {Ramirez Reina, Tomas and Odriozola, Jos{\´e} Antonio and Arellano-Garcia, Harvey}, edition = {1}, publisher = {Wiley-VCH}, address = {Weinheim}, isbn = {978-3-527-34639-4}, pages = {253 -- 280}, language = {en} } @techreport{SchmidtDonathWelsetal., author = {Schmidt, Peer and Donath, Ines and Wels, Martin and Pinnau, Sebastian and Grau Turuelo, Constantino and Breitkopf, Cornelia and Hack, Klaus and Baben, Moritz to and Reis, Bruno and M{\"u}ller, Michael and Sergeev, Dmitry and Qi, Jia}, title = {PCM Screening - Evaluierung eutektischer Gemische f{\"u}r den Einsatz als PCM: thermodynamische Modellierung und experimentelle Methoden : Energie Speicher: PCM-Screening : Schlussbericht}, publisher = {TIB - Leibniz-Informationszentrum Technik und Naturwissenschaften}, address = {Hannover}, doi = {10.2314/KXP:177643451X}, pages = {163}, abstract = {Ein wichtiges Ziel der Bundesregierung ist der Ausbau des Anteils erneuerbarer Energien an der gesamten Stromerzeugung. Die Entwicklung optimierter W{\"a}rme- und K{\"a}ltespeicher stellt einen wichtigen Baustein bei der Erreichung dieser Zielstellung dar. Elektrisch betriebene W{\"a}rmepumpen und Kompressionsk{\"a}ltemaschinen sowie dezentrale Klein-BHKW bieten in Verbindung mit entsprechend dimensionierten, thermischen Speichern ein großes Potential zum Lastmanagement in Smart Grids und somit zur Netzintegration von Strom aus erneuerbaren Energien. Die im Projekt entwickelte Methodik zur Suche nach neuen Latentspeichermedien kann f{\"u}r ein breites Anwendungsfeld von Heiz- und K{\"u}hlanwendungen in Geb{\"a}uden bis hin zur Kraftwerkstechnik eingesetzt werden. Innerhalb der F{\"o}rdermaßnahme „Anwendungsorientierte Forschung und Entwicklung zur nichtnuklearen Energieforschung" im 6. Energieforschungsprogramm der Bundesregierung wurde durch die Projektarbeiten das Schwerpunktthema Energiespeicher (3.8) adressiert, wobei der Aspekt der Entwicklung neuer Materialien mit reduzierten Kosten f{\"u}r einen wirtschaftlichen Betrieb im Vordergrund stand. Speziell wurden dabei die Unterpunkte 3.8.4 Thermische Speicher zur Weiterentwicklung, Optimierung und Erprobung von PCM sowie 3.8.5 {\"U}bergeordnete Themen mit Modellen und Simulationswerkzeugen f{\"u}r die Auswahl und Bewertung neuer Speichermaterialien adressiert. Die Projektergebnisse besitzen aber auch Ber{\"u}hrungspunkte mit den Schwerpunkten 3.12 Energieeffizienz in Industrie, Gewerbe, Handel und Dienstleistungen sowie 3.4 Solarthermische Kraftwerke, da mit der entwickelten Screening-Methode f{\"u}r diese Anwendungsf{\"a}lle neue W{\"a}rmespeichermaterialien auf der Basis wasserfreier Salze mit h{\"o}heren Prozesstemperaturen gefunden werden k{\"o}nnen. Durch den Einsatz von Methoden zur Modellierung und Simulation von Prozessen erfolgt gleichermaßen die Umsetzung einer energie- und ressourcenschonenden Forschungst{\"a}tigkeit. Das im Projekt entwickelte Vorgehen hilft dabei, einen {\"a}ußerst sparsamen Einsatz von Chemikalien, eine niedrige Belastung der Umwelt durch verringerten Entsorgungsaufwand der verbrauchten Stoffe sowie einen deutlich geringeren Aufwand und Energieeinsatz f{\"u}r die Messtechnik zu erm{\"o}glichen. Damit wurde zugleich das Schwerpunktthema 3.8.5 Modelle und Simulationswerkzeuge f{\"u}r die Auswahl und Bewertung neuer Speichermaterialien angesprochen.}, language = {de} } @misc{MuellerRachowGuentheretal., author = {M{\"u}ller, Klaus and Rachow, Fabian and G{\"u}nther, Vivien and Schmeißer, Dieter}, title = {Methanation of Coke Oven Gas with Nickel-based catalysts}, series = {International Journal of Environmental Science}, journal = {International Journal of Environmental Science}, number = {4}, issn = {2367-8941}, pages = {73 -- 79}, abstract = {For a complete transition from fossil to CO₂ neutral energy supply new energy storage concepts are needed that allow energy supply in times of absence of regenerative power production as during dark doldrums. A promising renewable energy storage approach is the power to gas (to power) technique based on the production of synthetic natural gas (also called e-methane) by methanation of CO₂ with H₂. The latter is usually produced by electrolysis. In any power to gas concept, electrolysis is a very critical part, due to its high costs, stability issues, or limited power of required electrolysers. As an alternative source of hydrogen, we investigate the methanation of coke oven gas (COG). COG is a byproduct of the carbon rich coke production from coal for the steel industry, with a high amount of hydrogen (~60vol\%). Coke oven gas furthermore contains CH₄(~25vol\%), CO (5-8vol\%), and CO₂(1-3vol\%), making it an attractive feedstock for the production of synthetic energy carriers like methane. In the present study, the authors investigate the direct conversion of CO and CO₂ from COG into e-methane. Compared to stoichiometric conversion, the COG hydrogen content is too high for catalytic methanation of CO₂. In order to achieve a higher methane yield, the addition of CO₂ from air, flue gas, or coal gasification can compensate the surplus of hydrogen in the coke oven gas. The process is evaluated by the conversion of CO and CO₂, the catalyst selectivity towards higher hydrocarbons for varying temperatures, and the CH₄ yield.}, language = {en} } @misc{KotHenkelMuelleretal., author = {Kot, Małgorzata and Henkel, Karsten and M{\"u}ller, Klaus and Kegelmann, Lukas and Albrecht, Steve and Tsud, Nataliya and K{\´u}s, Peter and Matolinov{\´a}, Iva and Schmeißer, Dieter}, title = {Al2O3-Atomic Layer Deposited Films on CH3NH3PbI3 : Intrinsic Defects and Passivation Mechanisms}, series = {Energy Technology , The Journal of Physical Chemistry C}, volume = {7}, journal = {Energy Technology , The Journal of Physical Chemistry C}, number = {11}, issn = {2194-4288}, doi = {10.1002/ente.201900975}, pages = {10}, abstract = {The initial interaction of atomic layer deposited films of Al2O3 at room temperature on CH3NH3PbI3 (MAPI) films is studied. Synchrotron radiation-based photoelectron spectroscopy is applied to analyze the initial changes in the Al-derived features by comparing samples with different Al2O3 film thicknesses. It is found that polarons and excitons, both intrinsic defects of Al2O3, play a key role in the interface formation. The polaronic states uptake a charge from the MAPI substrate. This charge is transferred to and stabilized in the excitonic state of Al2O3 which is assigned to predominately tetrahedral coordinated Al sites. This charge transfer is initiated by vacancies present in the MAPI substrate and stabilizes a covalent bonding at the Al2O3-MAPI interface but also causes a roughening of the interface which may lead to the formation of grain boundaries. On top of the rough interface, 2D Al2O3 clusters with an increasing number of octahedrally coordinated Al—O bonds grow, and with increasing Al2O3 coverage, they introduce self-healing of the structural defects.}, language = {en} } @incollection{HenkelHaeberleMuelleretal., author = {Henkel, Karsten and Haeberle, J{\"o}rg and M{\"u}ller, Klaus and Janowitz, Christoph and Schmeißer, Dieter}, title = {Preparation, properties and electronic structure of SnO₂}, series = {Single Crystals of Electronic Materials}, booktitle = {Single Crystals of Electronic Materials}, editor = {Fornari, Robert}, publisher = {Elsevier, Woodhead Publishing}, address = {Duxford}, isbn = {978-0-08-102096-8}, pages = {547 -- 572}, abstract = {This chapter reports about tin oxide (SnO₂), a material which belongs to the transparent conducting oxide family and is best characterized by its high conductivity, high carrier mobility, and the ability to form p-type conductivity. We correlate these properties in terms of localized intrinsic electronic defect states which are resolved by resonant photoelectron spectroscopy measurements. We describe SnO₂ in terms of an inhomogeneous, mixed-ionic-covalent semiconductor in which these intrinsic electronic defects state are stabilized.}, language = {en} } @misc{MuellerRachowIsraeletal., author = {M{\"u}ller, Klaus and Rachow, Fabian and Israel, Johannes and Charlafti, Evgenia and Schwiertz, Carola and Schmeißer, Dieter}, title = {Direct Methanation of Flue Gas at a Lignite Power Plant}, series = {International Journal of Environmental Science}, journal = {International Journal of Environmental Science}, number = {2}, issn = {2367-8941}, pages = {425 -- 437}, abstract = {The combustion of fossil fuels results in CO2 emission, which is one of the primary causes of global warming. An important approach for solving this problem is the fixation, the chemical utilization and the recycling of CO2. Therefore, we investigate the catalytic conversion of CO2 with H2 into methane (CH4) with an upscaled test station at a brown coal power plant. In a completely new strategy, we realize the direct conversion of the CO2 content of the flue gas, without a cleaning process like amine scrubbing or optimized combustion like oxyfuel. Our experiments are performed in matters of catalytic performance, heat production and stability of the catalytic Sabatier process, as a function of the gas flow rate. The catalytic performance is investigated with a simulated composition of flue gas and under real conditions directly at the power plant. The CH4 production by the Sabatier process is realized with a maximum input flow rate of near 50Nm3/h, with 30Nm3/h flue gas and 20Nm3/h hydrogen. For these values, the necessary power scale for hydrogen generation by electrolysis is around 100kW. With synthetic and real flue gas, a conversion up to 99\% (for hydrogen surplus) with 100\% selectivity is stabilized. The reaction operates in thermal steady state equilibrium without any external energy supply. In consequence, the process of CO2 recycling could be integrated directly as a post combustion process of conventional power plants, without an expensive capturing step, for example.}, language = {en} } @inproceedings{IsraelRachowSchwiertzetal., author = {Israel, Johannes and Rachow, Fabian and Schwiertz, Carola and Charlafti, Evgenia and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Self restriction oft the Sabatier reaction in large scale}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {A main goal for a sustainable energy supply is a long term energy storage system. One opportunity in this research field is the power to gas concept, where the produced gas can be fed in the existing network of natural gas. Here we show in a technical scale how the direct CO2 conversion to methane according the Sabatier reaction, CO2 + 4 H2 → CH4 + 2H2O , is self organized. At a certain limit of gas flow, a steady state equilibrium of exothermic heat production and thermal flow is reached and the reaction needs no further external annealing. We find for the maximum volume rate at the steady state equilibirum a shift of around 250 ∘C above the optimized temperature of the catalytic supported chemical equilibrium. It is shown that also with this setup the used catalyst works with a stable conversion higher than 80 \% under the reached temperature and given pressure conditions.}, language = {en} } @inproceedings{RachowIsraelSchwiertzetal., author = {Rachow, Fabian and Israel, Johannes and Schwiertz, Carola and Charlafti, Evgenia and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {CO2 Methanation with different gas mixtures}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 539}, abstract = {A key issue in the Energiewende in Germany is the storage of excess energy, as it enables energy management systems to react to fluctuating sources and enhances the flexibility of an energy mix. Power to Gas may be the most reasonable approach to store the energy in the form of hydrogen or synthetic natural gas. We study the direct conversion of CO2 by the Sabatier reaction to gain a methane based mixture which can replace natural gas in CHP plants and gas motors and can help to partially reduce the CO2 emission. In laboratory scale we investigated the performance (with IR and QMS) of Ni-based catalyst for different sources of CO2 like clean CO2, CO2 emitted as flue gas from an Oxyfuel power plant or a synthetic mixture with O2, N2 and SO2 in concentration typical for conventional power plants. Measurements from an up-scaled system are also presented, showing data important for a technical application. Here, we are able to convert more than 200kg CO2/day with conversion rates up to 90\%.}, language = {en} } @misc{MuellerFleigeRachowetal., author = {M{\"u}ller, Klaus and Fleige, Michael and Rachow, Fabian and Schmeißer, Dieter}, title = {Sabatier based CO2-methanation of flue gas emitted by conventional power plants}, series = {Energy Procedia}, volume = {40}, journal = {Energy Procedia}, issn = {1876-6102}, doi = {10.1016/j.egypro.2013.08.028}, pages = {240 -- 248}, abstract = {The hydrogenation CO2+ 4H2 ->CH4 + 2H2O discovered by Paul Sabatier nowadays is discussed as "Power-to-approach" to utilize excess energy from renewable electricity generation. In a laboratory scale, we investigate the Sabatier process in a simulated flue gas atmosphere of conventional base load power plants. The reaction is investigated with regard to conversion rates, yield, selectivity and long-term stability. Using a catalyst based on nickel,we extract selectivities near 100\% with a conversion around 85\%. Beside the influence of oxygen, we investigate further typical contaminations like NO2 and SO2.}, language = {en} } @misc{MuellerStaedterRachowetal., author = {M{\"u}ller, Klaus and St{\"a}dter, Matthias and Rachow, Fabian and Hoffmannbeck, David and Schmeißer, Dieter}, title = {Sabatier-based CO2-methanation by catalytic conversion}, series = {Environmental Earth Sciences}, volume = {70}, journal = {Environmental Earth Sciences}, number = {8}, issn = {1866-6280}, doi = {10.1007/s12665-013-2609-3}, pages = {3771 -- 3778}, abstract = {The catalytic conversion of CO2is an important component for the reintegration of secondary products like CO2 or H2 into the energy supply. An example is the "power to gas'" concept with a conversion of CO2 into CH4. The CO2 is transferred into a carrier of chemical energy, with the possibility to feed the produced CH4 into the existing network of natural gas. At temperatures of around 350 °C, hydrogenation of CO2 to CH4 is possible by the Sabatier reaction CO2+4H2->CH4+H2O. One prerequisite for efficient kinetics of the Sabatier reaction is the application and optimization of catalysts. The focus of catalyst development is given to their performance under the conditions to be expected in the special application. As a part of the project Geoenergy-Research (GeoEn), we address questions related to the catalytic utilization of CO2 produced in the course of the oxyfuel combustion of lignite. In this contribution, we report on the experimental setup in laboratory scale, which enables an advanced characterization of the catalytic performance, including thermodesorption measurements at atmospheric pressure in order to determine the amount of adsorbed CO2 under real conditions. We also show data for activation energies, the catalytic performance as function of temperature and the long time stability of a commercial Ru-based catalyst.}, language = {en} } @misc{StaedterMuellerRachowetal., author = {St{\"a}dter, Matthias and M{\"u}ller, Klaus and Rachow, Fabian and Richter, Matthias and Schmeißer, Dieter}, title = {Ambient pressure thermal desorption spectroscopy (AP-TDS) of NiO/SiO2 catalysts}, series = {Environmental Earth Sciences}, volume = {70}, journal = {Environmental Earth Sciences}, number = {8}, issn = {1866-6280}, doi = {10.1007/s12665-013-2835-8}, pages = {3779 -- 3784}, abstract = {The Sabatier reaction is a key process in the "power-to-gas" application which is considered to con-tribute to future chemical energy storage systems. In this contribution we focus on the catalytic active sites of a NiO catalyst supported on SiO2(NiO/SiO2) which is commonly used in the Sabatier reaction. A novel technique for the characterization of the active sites is presented and dis-cussed using thermal desorption spectroscopy at ambient pressure. This analytical tool is operated under reaction conditions and allows element specific measurements during the catalytic process of CO2 reforming towards methane. Beside the desorption experiments, XPS and XAS measurements of pristine and catalytically used samples are performed to determine the influence of the Sabatier reaction conditions on the surface structure of the catalyst.}, language = {en} } @inproceedings{FleigeMuellerSchmeisser, author = {Fleige, Michael and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Sabatier based CO2-Methanation of flue gas in conventional power plants}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {Already discovered by Paul Sabatier in 1902 the Hydrogenation according to CO2 + 4H2 ->CH4 + 2H2O nowadays is discussed in the course of the 'Power-to-Gas' approach to utilize excess energy from renewable electricity generation in times of oversupply of electricity. We investigate the behavior of this process in a simulated flue gas atmosphere of conventional base load power plants, which could be used as constant sources of the reactant CO2. Therefore the influence of different flue gas compositions such as varying contents of nitrogen and residual oxygen are tested in a laboratory scale. The heterogeneous catalysis process is investigated with regard to conversion rates, yield and selectivity and long-term stability of the Ni-catalyst. Earlier results of stable operating conditions in a 1:1 mixture of nitrogen and reactants, which is a typical ratio for flue gas in conventional power plants, could be confirmed in a first step.}, language = {en} } @inproceedings{IsraelMuellerRachowetal., author = {Israel, Johannes and M{\"u}ller, Klaus and Rachow, Fabian and Beuckert, Guido and Schmeißer, Dieter}, title = {Reaction kinetics of the Sabatier Reaction in a demonstration plant}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {We currently build up a demonstration plant for the direct catalytic conversion of CO2 into methane according to the Sabatier reaction CO2+4H2→CH4+2H2O. We have already reached conversion rates higher than 90\% and a selectivity close to unity in our laboratory experiments with NiO based catalysts. A good long term stability was obtained with a reactant gas flow density of 0.8 l/min cm2· at 350∘C. We will study the process now on a larger scale with a factor 10000. The process is controlled via mass flow controllers with a throughput of 20m3/h H2 and 5m3/h CO2 at an inlet gas pressure of up to 15 bar, the temperature is regulated by a PID multichannel controller. As water is a by-product we use an efficient cooling trap for its separation form the obtained methane. The reaction products are analyzed by a quadrupole mass spectrometer under reaction conditions. We start our experiments in using clean CO2 and H2. Later experiments will involve industrial quality (oxy-fuel) conditions also. Goal of this project is to determine the performance of the catalytic process under conditions which enable an industrial implementation in energy storage concepts. In this contribution we report of the design of a demonstration plant and on first experiments concerning the kinetics within the system.}, language = {en} } @inproceedings{RachowMuellerSchmeisser, author = {Rachow, Fabian and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Sabatier based Methanation of carbon dioxide and Catalyst stability against contaminations}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {The Sabatier-Reaction [CO2+4H2→CH4+2H2O] represents a possible way for the reduction and utilization of CO2 produced in the oxy-fuel combustion process. While using different ruthenium and nickel based catalysts we studied the catalytic performance with quadrupole mass spectroscopy and IR-spectroscopy in terms of conversion of CO2,yield of CH4, selectivity and stability. Conversions of up to 90\% and a selectivity of well above 95\% could be achieved. Further studies focus on the long term stability, especially with the influence of contaminations like SOx and NOx as they may occur in oxy-fuel or flue gas and could greatly reduce the life time of a catalyst. We investigate the limits of Ni based catalysts for those additives. However, technical oxy-fuel gas seems to have no particular effect on the activity of a commonly used NiO-catalyst when compared to quasi pure CO2 , showing only a small drop of performance after five days with a constant conversion rate of over 80\% at the end.}, language = {en} } @misc{MuellerRichterPhilipetal., author = {M{\"u}ller, Klaus and Richter, Matthias and Philip, Shine and Kunst, Manuel and Schmeißer, Dieter}, title = {Excited states in P3HT and P3HT/PCBM blends}, series = {BioNanoScience}, volume = {2}, journal = {BioNanoScience}, number = {1}, issn = {2191-1630}, pages = {42 -- 51}, language = {en} } @misc{MandalMuellerHenkeletal., author = {Mandal, Dipankar and M{\"u}ller, Klaus and Henkel, Karsten and Schmeißer, Dieter}, title = {The effect of X-ray photoelectron spectroscopy measurement on P(VDF-TrFE) copolymer thin films}, series = {Applied Surface Science}, journal = {Applied Surface Science}, number = {261}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2012.07.144}, pages = {209 -- 213}, abstract = {The impact of prolonged X-ray irradiation during X-ray photoelectron spectroscopy (XPS) measurement was investigated on poly(vinylidene-trifluoroethylene) (P(VDF-TrFE)) thin films. It was observed that prolonged X-ray irradiation can accelerate the crosslinking of P(VDF-TrFE) and diminish the ferroelectric phase. Fourier transform infrared spectroscopy (FT-IR) data indicate that the ferroelectric phase diminishes completely after 360 kJ of X-ray irradiation dose and it induces the paraelectric phase. In this work, the main emphasis was given to the optimization of the X-ray irradiation dose during XPS measurements to maintain the ferroelectric phase within the copolymer films.}, language = {en} } @misc{MuellerRichterFriedrichetal., author = {M{\"u}ller, Klaus and Richter, Matthias and Friedrich, Daniel and Paloumpa, Ioanna and Kramm, Ulrike Ingrid and Schmeißer, Dieter}, title = {Spectroscopic characterization of Cobalt-Phthalocyanine electrocatalysts for fuel cell applications}, series = {Solid State Ionics}, journal = {Solid State Ionics}, number = {216}, issn = {1872-7689}, doi = {10.1016/j.ssi.2011.12.013}, pages = {78 -- 82}, abstract = {For polymer-electrolyte-membrane fuel cells (PEM-FC), platinumcatalysts on carbon based substrates are state of the art, due to high electrochemical activity and chemical stability in acid electrolytes. High costs of platinum force investigations of alternative catalysts. With respect to the oxygen reduction reaction, possible candidates are transition metal (TM) complexes like TM-porphyrines or TM-phthalocyanines. Pyrolysis on carbon based substrates improves the catalytic activity. Highest activities were found for Fe or Co as transition metal centers. We present results of the pyrolysis of Co-phthalocyanine (CoPc) on carbon black. Besides an investigation of morphology by scanning electron microscopy (SEM) and chemical composition by energy dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) during pyrolysis, we present a near edge X-ray absorption fine structure (NEXAFS) study of the chemical composition for the related annealing steps. This investigation is accompanied by an electrochemical characterization of the catalytic activity and selectivity. The XPS and NEXAFS data indicate a decomposition of the CoN4(chelate-) complex during pyrolysis. The N1s data for 800 °C show graphite-like, formally pyrrolic and pyridinic like features, without any significant contri-bution of Co. The Co2p data for both, XPS and NEXAFS are dominated by CoO/Co2O3. It can be concluded that during the pyrolysis cobalt particles are formed by the disintegration of CoN4-centers, after pyrolysis these par-ticles become oxidized upon contact with air.}, language = {en} } @inproceedings{MuellerHoffmannbeckKirneretal., author = {M{\"u}ller, Klaus and Hoffmannbeck, David and Kirner, Georg and St{\"a}dter, Matthias and Schmeißer, Dieter}, title = {CO2-Methanation by Catalytic Conversion}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, abstract = {The utilization of CO2 as raw material is an important component of a program for CO2 reduction. A possibility is the production of methane. At a moderate temperature of around 350°C, hydrogenation of CO2 to methane is possible by the Sabatier reaction CO2 + 4H2 ->CH4 +2H2O. Prerequisite for an efficient kinetics of the Sabatier reaction is the application and optimization of catalysts. In this contribution, we present investigations of Ru and Ni catalysts on different substrates. For Ru/Al2O3 catalysts, we found stable operation without degradation within 500 hours with a conversion rate of 80\% at 350°C. For NiO/SiO2 catalysts, a conversion rate of 90\% was found for temperatures of 350-405°C. We also show the investigation of cross sensitivities against SOx and NOx, which are typical contaminations of CO2, generated by the industrial oxyfuel process. In our work the morphology (REM, AFM, specific surface), chemical composition (FTIR, XPS) and phase composition (XRD) of the catalysts are characterized. In addition, we report on thermodesorption (TDS) measurements at atmospheric pressure to determine the amount of adsorbed CO2 under real conditions. The project is funded by the German Ministry of Research and Education (BMBF-GeoEn).}, language = {en} } @inproceedings{PhilipMuellerRichteretal., author = {Philip, Shine and M{\"u}ller, Klaus and Richter, Matthias and Kunst, Marinus and Schmeißer, Dieter}, title = {Study of excited states and a model for exciton-polaron interaction in P3HT}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 47}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 47}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, abstract = {Organic semiconductors efficiently harvest light in the region of the solar spectrum due to a high absorption/extinction coefficient.In our work we study the electronic structure and the charge carrier dynamics of polymeric organic semiconductor regioregular poly(3-hexylthiophen-2,5-diyl) (P3HT), an ideal p-type semiconductor and a widely used conjugated polymer, and blends with the fullerene derivative phenyl-C61-butyric acid methyl ester (PCBM), an electron acceptor material. The study was done with the help of time resolved microwave conductivity (TRMC) for contactless investigation of bulk carrier dynamics, optical spectroscopy, ultraviolet photoelectron spectroscopy(UPS) and high resolution X-ray absorption spectroscopy(XAS) which investigates excited states of rr-P3HT. From the data obtained we could infer the positions of the valence and conduction band, the existence of two excitons as well as the co-existence of one dimensional and two dimensional polarons. Based on our spectroscopic data we propose a model in which the scattering of virtual polarons and excitons are shown to create mobile polaronic charge carriers.}, language = {en} } @inproceedings{PhilipMartinezMuelleretal., author = {Philip, Shine and Martinez, Elias and M{\"u}ller, Klaus and Kunst, Marinus and Schmeißer, Dieter}, title = {Time resolved microwave conductivity measurements of Bulk Heterojunction solar cells}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 301}, abstract = {The time resolved microwave conductivity (TRMC) method was used in order to study the generation and decay kinetics of charge carriers in the Bulk Heterojunction (BHJ) solar cells. The charge carriers were generated with 532nm laser pulses of 10ns FWHM (Full Width at Half Maximum) induced in the cells. The BHJ solar cells used for the measurements had a photoactive layer consisting of a mixture of Poly (3-Hexylthiophene) P3HT and Phenyl-C61-butyric acid methyl ester (PCBM) which was spin coated onto Indium tin oxide (ITO)/glass substrates. In the field of Organic photovoltaic blends, TRMC method is introduced as a new method of direct investigation of the charge carrier lifetime as well as the charge carrier mobility and we were successful in studying the charge carrier lifetime of the reference BHJ solar cells. We also studied the influence of aligned ferroelectric fields on the charge separation in BHJ solar cells. As ferroelectric material, we used the copolymer Poly (vinylidene fluoride - trifluoroethylene) P(VDF-TrFE).}, language = {en} } @inproceedings{MbuaMuellerRichteretal., author = {Mbua, Roy and M{\"u}ller, Klaus and Richter, Matthias and Henkel, Karsten and Paloumpa, Ioanna and Schmeißer, Dieter and Kramm, Ulricke}, title = {Investigation of new Catalysts for PEM Fuel Cells}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 483}, abstract = {Increasing green house emissions amplify global warming concerns worldwide. Fuel cells, based on polymer electrolyte membranes (PEM) are part of the solution to this issue. We aim at developing and testing new catalysts for fuel cells. Platinum catalysts perform best in PEM fuel cells to date but they are very expensive. For fuel cells to be perfectly applicable and economically affordable, an alternative catalyst with similar or even greater efficiency should be developed. Metal phthalocyanines are known to be good oxygen reduction catalysts and are associated with high electron transfer properties. We investigated Cobalt Phthalocyanine in its pure state mixed with Carbon Black (CoPc:Carbon Black=1:9) untreated and also after a treatment in N2 at several temperatures, up to 1000°C for 30 minutes. Results of XPS and EDX analyses reveal that the treatment at higher temperatures causes a rearrangement in the chemical states of Co, N and C atoms. Furthermore, results of cycling voltammetry (CV) analysis reveal that CoPc treated in N2 at 800°C exhibited a higher current density, in conclusion, a higher catalytic activity than the untreated CoPc.}, language = {en} } @misc{HenkelSeimePaloumpaetal., author = {Henkel, Karsten and Seime, Bernd and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Optimization of MFIS structures containing poly(vinylidene-fluoride trifluoroethylene) for non-volatile memory applications}, language = {en} } @misc{HenkelSeimePaloumpaetal., author = {Henkel, Karsten and Seime, Bernd and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Buffer layer investigations on MFIS capacitors consisting of ferroelectric poly[vinylidene fluoride trifluoroethylene]}, language = {en} } @inproceedings{PhilipRichterFriedrichetal., author = {Philip, Shine and Richter, Matthias and Friedrich, Daniel and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Spectroscopic investigations of P3HT/PCBM films for organic BHJ solar cells}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 153}, abstract = {Investigations of the electronic structure and composition of regioregular poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) based films using Near Edge X-Ray Absorption Fine Structure (NEXAFS) are presented. The measurements were performed at the U49/2-PGM2 beam line of BESSY II, Berlin recording TEY (total electron yield) and TFY (total fluorescence yield) data. Samples prepared by spin coating a mixture of P3HT dissolved in chloroform and PCBM dissolved in chlorobenzene onto ITO (indium tin oxide) coated glass slides were analyzed. Upon measuring the pure P3HT and PCBM, all reported excitations were observed, whereas the blended system is a weighted superposition of the related peaks. Analyzing the data we calculate the composition of the mixture. We also show angular dependent NEXAFS measurements of the P3HT/PCBM blend in order to measure the orientation and distribution of the P3HT polymer. Additionally, we show a new approach for organic solar cell application. BaTiO3 nanoparticles were incorporated as nanodispersion into the donor-acceptor blend or the ferroelectric copolymer poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) was spincoated as an ultrathin film below the blend.}, language = {en} } @misc{HenkelSeimePaloumpaetal., author = {Henkel, Karsten and Seime, Bernd and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Buffer layer incestigaions on MFIS capacitors consisting of ferroelectric poly[vinylidene fluoride trifluoroethylene]}, series = {IOP conference series : Materials Science and Engineering}, volume = {8}, journal = {IOP conference series : Materials Science and Engineering}, number = {1}, issn = {1757-899X}, pages = {012036}, language = {en} } @inproceedings{KachelRichterPhilipetal., author = {Kachel, Krzysztof and Richter, Matthias and Philip, Shine and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Performance of organic solar cells with a ferroelectric component}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 153}, abstract = {Charge dissociation and recombination are important factors for the efficiency of organic solar cells, even in blended systems of different polymers. As a new approach, the influence of additional blended ferroelectric nanoparticles on the solar cell performance is investigated. The ferroelectric dipole of the nanoparticle causes a local field, which could lead to a longer recombination time of the polaron pairs. As solar cell system we use bulk heterojunction cells or bilayer structures based on regioregular poly(3-hexylthiophene) (P3HT) as the donor and phenyl-C61-butyric acid methyl ester (PCBM) as the acceptor molecule. As ferroelectric additive we use the ferroelectric copolymer poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) or BaTiO3. The copolymer is spincoated as ultrathin film of 20nm, whereas the BaTiO3 is incorporated as nanodispersion into the donor-acceptor blend. We present the solar cell parameters for the different geometries and ferroelectric materials as a function of ferroelectric content and of the alignment of the ferroelectric dipoles after application of an external electric field.}, language = {en} } @inproceedings{RichterMuellerPhilipetal., author = {Richter, Matthias and M{\"u}ller, Klaus and Philip, Shine and Paloumpa, Ioanna and Henkel, Karsten and Schmeißer, Dieter}, title = {Temperature dependence of organic solar cell parameters}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 671}, abstract = {The influence of an annealing step on the parameters of bulk heterojunction organic solar cells is investigated. In order to fabricate the solar cells we use glass coated with ITO (Indiumtinoxide) as a substrate on which the active layer consisting of P3HT and PCBM is spincoated. Al-electrodes are evaporated on top of the active layer. We use PEDOT:PSS as buffer layer. Each sample is annealed at different temperatures for a short time. Between every temperature step the I-V characteristic of the cell is measured. The following parameters are derived afterwards: FF, Isc (density), Voc. Also the efficiency is estimated. The results show a maximum cell efficiency for drying at 100°C for 20sec. A further important step for preparation is the drying procedure of the PEDOT:PSS layer. Here an improvement of about 50\% in cell efficiency is measured after drying at 50°C for 5 days under inert gas atmosphere.}, language = {en} } @inproceedings{HenkelMandalSeimeetal., author = {Henkel, Karsten and Mandal, Dipankar and Seime, Bernd and Paloumpa, Ioanna and Lazareva, I. and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Electrical investigations on MFIS structures consisting P[VDF/TrFE] as ferro-electric layer for non-volatile memory applications}, series = {Proceedings of 15th Workshop on Dielectrics in Microelectronics, Bad Saarow, 23 - 25 June 2008, Bad Saarow (Berlin)}, booktitle = {Proceedings of 15th Workshop on Dielectrics in Microelectronics, Bad Saarow, 23 - 25 June 2008, Bad Saarow (Berlin)}, pages = {159 -- 160}, language = {en} } @article{MuellerMandalHenkeletal., author = {M{\"u}ller, Klaus and Mandal, Dipankar and Henkel, Karsten and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Ferroelectric properties of spin-coated ultrathin (down to 10nm) copolymer films}, language = {en} } @inproceedings{MuellerSchmeisser, author = {M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Carbon-plot-microstructuring for all-polymer-transistors}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {This contribution describes the use of a low-cost technology to form organic microstructures for electronical applications. We demonstrate the principle ability of this method through the fabrication of organic field effect- transistors. With a computer driven plotter, substrates like printing foil and colloidal graphite (diluted in water) for the electrodes, we realized channel lengths of 20+10 micrometers. Compared with transistor devices, fabricated using conventional photolithographic methods and the same semiconducting material, this technique is a hopefull approach to produce microelectronic structures that are low-cost and all-organic.}, language = {en} } @inproceedings{HenkelSeimePaloumpaetal., author = {Henkel, Karsten and Seime, Bernd and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {C(V) and C(t) measurements on MFIS structures consisting P[VDF/TrFE] as ferroelectric layer}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 828}, abstract = {Ferroelectric Field Effect Transistors (FeFETs) are considered as a candidate for future non volatile and non destructive readout memory cells. A possible low cost solution is the use of poly[vinylidene fluoride trifluoroethylene (P[VDF/TrFE]). Using P[VDF/TrFE] we focus on metal ferroelectric insulator semiconductor (MFIS) capacitor structures. In this contribution we will summarize our investigations related to capacitance measurements in dependence of applied bias (C(V)) and time (C(t)). The thickness of the ferroelectric layer as well as the thickness and the material of the buffer layer have been investigated for optimization of the write voltage. CV measurements at higher temperatures deliver decreased flatband voltage shifts within one CV loop resulting in lower memory windows. At temperatures around 100∘C the hysteresis totally vanished, pointing out the ferroelectric behavior of the system. C(t) measurements at a constant bias have been performed for retention analysis of the MFIS stack. After applying a writing pulse we could distinguish between a higher and a lower capacitance state for more than 5 days. This work is supported by Deutsche Forschungsgemeinschaft within priority program 1157 (SCHM 745/11-2).}, language = {en} } @inproceedings{MuellerSchmeisser, author = {M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Elektronenspektroskopie an Kupferindiumdisulfid Oberfl{\"a}chen}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {In diesem Beitrag wird eine Studie vorgestellt, welche die elektronenspektroskopische Untersuchung von CIS-Oberfl{\"a}chen f{\"u}r Solarzellen zum Thema hatte. XPS-UPS Analysen von Cu-reichen CuInS2-D{\"u}nnfilmen zeigten, daß die Variationen der Elementverh{\"a}ltnisse im Verlauf eines kontrollierten Heizprozesses entlang bin{\"a}rer Schnitte des tern{\"a}ren Phasendiagramms Cu-In-S verlaufen. Die Elementverh{\"a}ltnisse bei zus{\"a}tzlich aufgedampftem Kupfer und erh{\"o}hter Temperatur f{\"o}hrten in den Homgenit{\"a}tsbereich von CuInS2. PEEM-Untersuchungen zur Probenmorphologie zeigten, daß ein Sinterprozess w{\"a}hrend der Temperung der Proben bis 550 C und einer Belegung mit Kupfer erfolgt. Mit Differenz-PEEM-Aufnahmen konnten kupferreiche Fremdphasen wie CuS an der Oberfl{\"a}che sichtbar gemacht werden. Die in-situ Charakterisierung des Oberfl{\"a}chenchemismus im Verlauf der Temperung zeigte eine zunehmende Homgenit{\"a}t der Elementverteilung, was auf einen geringer werdenden Anteil von Fremdphasen hindeutet. NEXAFS-Aufnahmen ergaben erstmals Informationen {\"u}ber die Bandstruktur oberhalb der Fermienergie und ebenfalls Hinweise auf Fremdphasen sowie deren Reaktionen bei h{\"o}heren Temperaturen.}, language = {de} } @inproceedings{TorcheMuellerHenkeletal., author = {Torche, Mohamed and M{\"u}ller, Klaus and Henkel, Karsten and Lupina, Grzegorz and Goryako, Andrey and Wollweber, J{\"u}rgen and Schmeißer, Dieter}, title = {Investigations of 3C-SiC growth on Si (001)}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {Carbide was grown on Si (001) - substrates with supply of C2H2. Investigation of the interface Si/SiC (buffer layer) is essential for optimized preparation conditions, leading to a high quality of the growing SiC crystal. In addition to the lattice mismatch of 20 per cent between Si and SiC, which causes defects like dislocations or stacking faults, the chemical homogeneity of this layer is important. XPS was used to characterize the first state of SiC crystal growth on the Si substrate. Carbonizing with C2H2 leads to surface reactions which build up the buffer layer. By using electron spectroscopy, it was possible to characterize the SiC/Si (001) buffer layer, depending on the following reaction parameters: Tsubstrate , PC2H2 , PH2 , the ratio of pressures and the reaction time. The measurements were performed in terms of the content of carbide, oxide and roughness/etching-efficiency (Profilometer) for the reaction parameters above. We found, that the most critical parameter is the temperature of the substrate (Tsubstrate).}, language = {en} } @inproceedings{MandalMuellerSchmeisser, author = {Mandal, Dipankar and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Dipole orientation of the P[VDF-TrFE] co-polymer films: A NEXAFS study}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 840}, abstract = {Ferroelectric properties of copolymers of vinylidene fluoride with trifluoroethylene (P[VDF-TrFE]) has become great deal of interest due to potential use in non volatile memory technology. Permanent dipoles (formed between the alternating hydrogen and fluorine atom within the copolymer) ordering of orientation are crucial for device efficiency. Here we focus on thickness dependence dipole orientation in these co-polymer films. In our systematic studies, we found there is prominent dipole re-orientation effect also for the intrinsic films (~10 nm thickness) before applying the electric field. It is observed after the application of the field, the dipoles re-oriented in opposite direction. Therefore, we conclude that the lowest thickness of the film should have well grown crystalline lamellae structure. As a result, c-axis of crystallites acts as well define manner in plane of the surface and for that reason the b-axis is more free. Because the b-axis is parallel to the polarization direction, it is easy to get a preferred orientation of the dipoles. For thicker films (here up to 100 nm), the average orientation effect is hindered, so a very low re-orientation effect has been observed. For this investigation, we used Near Edge X-ray Absorption Spectroscopy, at the U 49/2-PGM beam line of BESSY-II, Berlin. This work is supported by DFG within SPP1157 (SCHM 745/11-2).}, language = {en} } @inproceedings{MuellerMandalHenkeletal., author = {M{\"u}ller, Klaus and Mandal, Dipankar and Henkel, Karsten and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Interface reactions of ferroelectric copolymer layers with different electrode materials}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 830}, abstract = {The ferroelectric copolymer poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) is a possible material for low cost applications as organic nonvolatile memory element. We present an XPS interface investigation of the copolymer/electrode interface. Below 100nm film thickness, interface phenomena becomes important. Possible interface reactions could lead to a reduction of the ferroelectric functionality.We present a comparative study of the two interfaces Al/P(VDF-TrFE) and PEDOT:PSS/P(VDF-TrFE). The result is a clear indication of a surface reaction in between the Aluminum-electrodes. In contrast, for PEDOT:PSS the measurements shows a layer by layer formation of the interface PEDOT:PSS/PVDF without any reaction. Second, we present a study of remanent polarization of ultrathin spincoated films of the copolymer, in a thickness range from 5 to 100mn, with organic electrodes like PEDOT:PSS. The measurements are carried out by using the flatband shift of a capacitance-voltage (CV) characteristic. This shift of flatband voltage is used as value for the electric polarization of the polymer.}, language = {en} } @inproceedings{MuellerPaloumpaSchwiertzetal., author = {M{\"u}ller, Klaus and Paloumpa, Ioanna and Schwiertz, Carola and Jahnke, Agnes and Schmeißer, Dieter}, title = {All Polymer Field-Effect-Transistors based on Low-Cost-Microstructuring}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {Thin film transistors with P3HT as active layer have been prepared by spin coating. The electrodes for source and drain have been prepared by a low cost plotting method with colloidal graphite or carbon black as the conducting material. PEDOT or carbon black was used as gate electrode. The devices, prepared by different methods and materials have been characterized by electrical measurements, for example, their transfer and output characteristics. Furthermore, the influence of different materials on effects like hysteresis or reproducibility will be compared. In addition, we describe a project investigating new types of biosensors with functionalized gate electrodes. Exchanges of dipole moments or charges by immobilisation of biomolecules will change the electrical characteristic of the transistor, which leads to a sensing signal proportional to their amount.}, language = {en} } @inproceedings{MuellerBurkovSchmeisser, author = {M{\"u}ller, Klaus and Burkov, Yevgen and Schmeißer, Dieter}, title = {Spectromicroscopic Characterisation of All Polymer Transistor Structures}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {In order to optimize organic field effect transistors, the characterization of surfaces in terms of their roughness or chemical composition is very important. We report on high resolution spectromicroscopic mapping of organic thin film transistors by photoemission electron microscopy (PEEM). It was shown that PEEM is a useful technique to characterize the surface morphology (roughness), the chemical homogeneity or the composition of structures in between the source and drain electrodes. Mapping of surface potentials, especially at the interface electrode/channel is possible. We compare different preparation methods and the characterization at applied voltages is also shown. The transistors itself were prepared by a new low cost method. The electrodes for source and drain have been prepared by a plotting method with colloidal graphite or carbon black as the conducting material. P3HT was used as active layer and has been prepared by spin coating.}, language = {en} } @inproceedings{GeussMuellerPaloumpaetal., author = {Geuss, Markus and M{\"u}ller, Klaus and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Surface Potential profiling on operating full organic thin film transistors by Kelvin probe force microscopy}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {Kelvin-AFM is employed to study all polymer organic thin film transistors which are promising candidates for low cost - low performance applications like active matrix displays, sensors or single-serving devices. We use bottom contact source-drain- electrode structures of different organic materials like carbon-black or graphite plotted on a printing foil. Semiconducting regioregular Poly(3-Hexylthiophene-2,5-diyl) (P3HT) was subsequently deposited by spin coating. Surface potential profiles across the transistor channel were measured by Kelvin-AFM for various source-drain potential differences and signs. We found that contact resistances cause characteristic steps in the surface potential near the channel edges which vary with the electrode material. Furthermore, nonlinearities appear in the potential gradient which possibly give evidence for lateral inhomogeneities of the carrier mobilities. In summary, surface potential imaging with high lateral resolution ( approx. 100 nm) is introduced as a powerful tool for the characterisation of the transistor performance and the selection of suitable low cost electrode materials.}, language = {en} } @inproceedings{SohalHenkelMuelleretal., author = {Sohal, Rakesh and Henkel, Karsten and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Growth and Characterization of 3C-SiC thin films on Si substrates}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {This work reports on the growth and characterization of cubic silicon carbide thin films. A cold wall low pressure chemical vapour deposition (LPCVD) system has been used to grow the cubic silicon carbide. The two step method, carbonization and subsequent growth, has been used to grow good quality 3C-SiC thin films. The composition and structure of deposited thin films have been analysed by Fourier Transform Infrared Spectroscopy (FTIR), XPS and X-Ray Diffractometry (XRD). The structural quality of the films has been optimized as a function of substrate temperature during carbonization and growth. X-rays diffraction measurements shows that the grown layers are highly oriented crystalline cubic silicon carbide.}, language = {en} } @inproceedings{MuellerBurkovSchmeisser, author = {M{\"u}ller, Klaus and Burkov, Yevgen and Schmeißer, Dieter}, title = {Surface potential profiling on organic thin film transistors by photoemission-electron-microscopy (PEEM)}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {Surface potential imaging with Photoemission-electron-microskopy (PEEM) in high lateral resolution is introduced as a new tool for the characterisation of organic transistor structures. We use source-drain- electrode structures of different organic materials like carbon-black or graphite plotted on a printing foil. Semiconducting regioregular Poly(3-Hexylthiophene-2,5-diyl) (P3HT) was deposited by spin coating. For our measurements we used radiation of a standard high pressure Hg-lamp (4,9 eV) and synchrotron radiation at the BESSYII-U49/2 beam line. In contrast to Kelvin-AFM measurements of the surface potential, PEEM enables a simultaneous analysis of chemical composition by photoelectron spectroscopy. UPS, for example, at zero potential gives information on chemical homogeneity of the organic semiconductor in lateral resolution. PEEM images at applied voltages, compared with UPS-spectra, gives informations on doping profiles in the semiconductor, for example. In conclusion, PEEM should be a complementary method for characterisation of the surface potential with Kelvin-AFM. In addition, PEEM gives opportunities for measurements of chemical composition in the working state of the transistor (applied voltages).}, language = {en} } @inproceedings{HenkelPaloumpaMuelleretal., author = {Henkel, Karsten and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {P(VDF/TrFE) as a ferroelectric dielectric for Organic Field effect Transistors in MFIS structure}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {MFIS structures consisting of metal, ferroelectric poly[vinylidene fluoride trifluoroethylene](P[VDF/TrFE]), insulator, semiconductor (Si) are fabricated and the influence of the polarization of the P(VDF/TrFE) on the CV characteristics of these structures is investigated. We find a characteristic ferroelectric hysteresis in the CV curves upon increasing the voltage scan window (e.g.-U...U,U=6...30V, |UP(VDF/TrFE)|≤15V, dP(VDF/TrFE)=300 nm). A writing process with adequate electric fields causes large shifts in the flatband voltage ( Δ UFB>4V for the quoted example before) which are stable over days. We report on our investigations which focus on the switching behavior by varying the parameters like polymer thickness, writing field strength and time, long time stability, reversing voltage and insulating material (SiO2, PMMA (Polymethylmetacrylate)). This material combination is favorable for transfer into our full organic concept of field effect transistors for application as a nondestructive readout memory (NDRO) cell.}, language = {en} } @inproceedings{MuellerPaloumpaHenkeletal., author = {M{\"u}ller, Klaus and Paloumpa, Ioanna and Henkel, Karsten and Schmeißer, Dieter}, title = {Organic Field Effect Transistors with polymer high-k dielectric insulator}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {Organic field effect transistors consisting of the copolymer poly(vinylidene fluoridetrifluoroethylene) (P(VDF-TrFE)) and P3HT (poly(3-hexlythiophene)) as active layer have been fabricated. The influence of P(VDF-TrFE) on the transconductance of organic field effect transistors was investigated and enhanced gate effects are observed compared to similar transistors with PMMA (Polymethylmetacrylate) as gate dielectric. Due to the high dielectric constant of P(VDF-TrFE) (DK=12) an operation voltage smaller than for a conventional organic dielectric like PMMA (DK=3.3) was observed. The thickness of the spincoated dielectric layers is in the range of 2microns and in consequence, no significant hysteresis was found, a prerequisite for transistor operation.}, language = {en} } @article{MuellerMandalSchmeisser, author = {M{\"u}ller, Klaus and Mandal, Dipankar and Schmeißer, Dieter}, title = {No interfacial layer for PEDOT electrodes on PVDF: Characterization of reactions at the interface P(VDF/TrFE)/Al and P(VDF/TrFE)/PEDOT:PSS}, language = {en} } @article{MuellerHenkelSchmeisser, author = {M{\"u}ller, Klaus and Henkel, Karsten and Schmeißer, Dieter}, title = {Organic field effect transistors with ferroelectric hysteresis}, language = {en} } @inproceedings{SeimeHenkelPaloumpaetal., author = {Seime, Bernd and Henkel, Karsten and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Buffer layer investigation of MFIS stacks with an organic ferroelectric layer}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 42}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 42}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 216}, abstract = {Ferroelectric field effect transistors are considered as future non volatile and non destructive readout memory cells. Conventional Perowskite-type ferroelectric materials are shown to work but they need expensive high temperature and high partial pressure processing steps inducing also unintentional and undefined interfacial layers.A possible low cost solution is the use of poly[vinylidene fluoride trifluoroethylene (P[VDF/TrFE]). This is a ferroelectric polymer which can be spin coated at room temperature onto silicon suited with well defined buffer layers. Using P[VDF/TrFE] we focus on metal ferroelectric insulator semi-conductor (MFIS) structures. In MFIS structure a part of the programming voltage drops over the buffering insulator. We report on attempts to minimize this fraction by optimizing the voltage divider over the buffer and the ferroelectric layers. CV measurements for different thickness of the buffer (10-235nm) and the ferroelectric layer(100nm-1μm) and for different permittivity values of the buffer layer(SiO2, Al2O3, HfO2) will be presented. This work is supported by Deutsche Forschungsgemeinschaft within priority program 1157 (DSCH 745/11-1).}, language = {en} } @inproceedings{MandalMuellerSeifarthetal., author = {Mandal, Dipankar and M{\"u}ller, Klaus and Seifarth, Olaf and Hoffman, Patrick and Henkel, Karsten and Schmeißer, Dieter}, title = {Study of reactions at the interface P(VDF/TrFE)/Al and P(VDF/TrFE)/PEDOT:PSS}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 42}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 42}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 797}, abstract = {Due to potential use in non volatile memory application, Poly(vinylidene fluoride/trifluoroethylene) (P(VDF-TrFE)) is a great deal of interest, especially to produce organic field effect transistors (OFET). Right now it was found that Aluminum is one of the cost-effective inorganic electrode candidate. On the other hand, poly(3,4 ethylenedioxythiophene):poly(4-styrenesulfonate)(PEDOT:PSS) shows promising behavior for the application as organic electrode. In part of our investigations we have systematically studied surface interactions of organic ferroelectric thin films (P(VDF-TrFE))with inorganic (Al) and organic layers (PEDOT:PSS). By X-ray photoelectron spectroscopy (XPS) is has been found that there is a interfacial reaction with Al and the copolymer. In contrast, for electrodes, made of PEDOT: PSS, we found not such kind of behavior. In this case, we found no evidence for any surface reaction. Furthermore, we present our results concerning the orientation of permanent dipoles in the co-polymer (formed between hydrogen and fluorine atom). Here, we use Near-edge X-ray absorption fine structure (NEXAFS) analysis at the U 49/2 - PGM2 beam line of the BESSY-II Synchrotron. This work is supported by Deutsche Forschungsgemeinschaft (DFG) within priority program 1157 (DSCH 745/11-1).}, language = {en} } @inproceedings{GoriachkoMuellerPaloumpaetal., author = {Goriachko, Andrii and M{\"u}ller, Klaus and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Scanning Kelvin Probe Microscopy Investigations of Au-P3HT-Au structures for Organic Field Effect Transistors}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {We report on the scanning Kelvin probe microscopy (SKPM) investigation of the source-channel-drain structures of organic field effect transistor (OFET). A poly-3-hexyl-thiophen (P3HT) organic semiconductor film, spin-coated on a glass-substrate and 65 nm thick, is used as a 2 mkm channel between Au source (drain) electrodes. Depending on the preparation conditions, the P3HT film consists of either amorphous nm-seized molecular clsuters or mkm-long chains. The SKPM allows mapping of electric potential along with the surface topography on the DC-biased structures (8V applied between source and drain). It reveals a linear potential fall in the channel region as well as the abscence of potential jumps (contact resistance) in the electrode/channel regions. This is a direct indication of the top-gate OFET type advantage, which the given structure is suited for. Due to the high spatial resolution of the UHV-based SKPM, doping inhomogenities of the p-type P3HT semiconductor as well as the space charge region on the electron injecting electrode are observed. In addition we present SKPM investigations of the structure with source and drain electrodes but without a semiconductor, showing electric field configuration for the given electrodes geometry.}, language = {en} } @article{MuellerPaloumpaSchmeisseretal., author = {M{\"u}ller, Klaus and Paloumpa, Ioanna and Schmeißer, Dieter and Henkel, Karsten}, title = {Organic thin film transistors with polymer high-k dielectric insulator}, language = {en} } @article{Mueller, author = {M{\"u}ller, Klaus}, title = {PEEM imaging contrast in an operating organic electronic device}, language = {en} } @article{Mueller, author = {M{\"u}ller, Klaus}, title = {Spectro-Microscopic Characterisation of CuInS2 Surfaces}, abstract = {hotoemission electron microscopy (PEEM) is used to study CuInS2 surfaces. CuInS2 (CIS) is used as polycrystalline absorber layer for thin film solar cells. A characterisation in terms of morphological information, elemental distribution, and of doping inhomogeneities at the surface is very important. We demonstrate that the method is capable for such surface studies in high lateral resolution. The use of synchrotron radiation allows the visualization of chemical inhomogeneities in single grains. By taking PEEM images around the absorption edges of Cu, In, or S, we are able to map elemental distributions, separated from morphology-dependent information in the PEEM image.}, language = {en} } @article{MuellerScheerSchmeisseretal., author = {M{\"u}ller, Klaus and Scheer, R. and Schmeißer, Dieter and Burkov, Yevgen}, title = {Preparation of stoichiometric CuInS2-Surfaces}, series = {Thin Solid Films}, volume = {451-452}, journal = {Thin Solid Films}, issn = {0040-6090}, pages = {120 -- 123}, language = {en} } @misc{MuellerBurkovSchmeisser, author = {M{\"u}ller, Klaus and Burkov, Yevgen and Schmeißer, Dieter}, title = {PEEM and my-NEXAFS of Cu-In-S2-surfaces}, series = {Thin Solid Films}, volume = {431-432}, journal = {Thin Solid Films}, issn = {0040-6090}, pages = {307 -- 311}, abstract = {Polycrystalline CuInS2 samples are an ideal system for photoemission electron microscope studies. The polycrystalline grains have a diameter of approximately 5 small mu, Greekm and the system is expected to be highly inhomogeneous because of the existence of many sub-phases. We used a recently established procedure to reproducibly obtain stoichiometric CuInS2-surfaces and follow the changes in the morphology, the elemental inhomogeneous distribution, and the development of the electronic structure upon its preparation. We find that the individual grains trend to coagulate, the surface composition becomes more homogeneous, and identify characteristic features of the unoccupied DOS.}, language = {en} } @article{MuellerMilkoSchmeisser, author = {M{\"u}ller, Klaus and Milko, S. and Schmeißer, Dieter}, title = {Preparation of stoichiometric CuInS2-surfaces - an XPS, UPS-study}, series = {Thin Solid Films}, volume = {431-432}, journal = {Thin Solid Films}, issn = {0040-6090}, pages = {312 -- 316}, abstract = {CuInS2 films are investigated with photoelectron spectroscopy. We find significant deviation from the stoichiometric composition depending on the preparation on the films. For Cu-rich films (start composition) we show that by Ar sputtering and annealing the surface composition varies along a binary cut of the Cu-In-S ternary phase diagram. We also present a novel technique which brings the surface composition close to the stoichiometric stability range of the CuInS2 phase. The technique used the evaporation of Cu on the sputter cleaned surface.}, language = {en} } @misc{MuellerPaloumpaSchmeisser, author = {M{\"u}ller, Klaus and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Carbon-plot-microstructuring for all-polymer-transistors}, series = {Synthetic Metals}, volume = {138}, journal = {Synthetic Metals}, number = {1-2}, issn = {0379-6779}, pages = {271 -- 273}, abstract = {This contribution describes the use of a low-cost technology to produce organic microstructures for electronically applications. With a computer driven plotter, substrates like printing foil and colloidal graphite (diluted in water) for the electrodes, we realised channel lengths of 20±10 microm. Compared with transistor devices, fabricated using conventional photolithographic methods and the same semiconducting material, this technique is a hopeful approach to produce microelectronic structures that are low-cost and all-organic.}, language = {en} } @inproceedings{MuellerPaloumpaSchmeisser, author = {M{\"u}ller, Klaus and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Carbon-Plot-Micostructuring for All-Polymer-Transistors}, language = {en} } @misc{AubeleGrillEggertetal., author = {Aubele, Maria and Grill, Eva and Eggert, Thomas and Schneider, Erich and Strobl, Ralf and Jahn, Klaus and M{\"u}ller, Martin and Holle, Rolf and Linkohr, Birgit and Heier, Margit and Ladwig, Karl-Heinz and Lehnen, Nadine}, title = {Symptoms in unilatral vestibular hypofunction are associated with number of catch-up saccades and retinal errors: results from the population-based KORA FF4study}, series = {Frontiers in Neurology}, volume = {2023}, journal = {Frontiers in Neurology}, number = {14}, issn = {1664-2295}, pages = {8}, abstract = {Objective: The presence and intensity of symptoms vary in patients with unilateral vestibular hypofunction. We aimed to determine which saccadic and vestibulo-ocular reflex parameters best predict the presence of symptoms in unilateral vestibular hypofunction in order to better understand vestibular compensation and its implications for rehabilitation therapy. Methods: Video head impulse test data were analyzed from a subpopulation of 23 symptomatic and 10 currently symptom-free participants with unilateral vestibular hypofunction, embedded in the KORA (Cooperative Health Research in the Region of Augsburg) FF4 study, the second follow-up of the KORA S4 population-based health survey (2,279 participants). Results: A higher number of catch-up saccades, a higher percentage of covert saccades, and a larger retinal error at 200 ms after the onset of the head impulse were associated with relevant symptoms in participants with unilateral vestibular hypofunction (p = 0.028, p = 0.046, and p = 0.038, respectively). After stepwise selection, the number of catch-up saccades and retinal error at 200 ms remained in the final logistic regression model, which was significantly better than a null model (p = 0.014). Age, gender, saccade amplitude, saccade latency, and VOR gain were not predictive of the presence of symptoms. Conclusion: The accuracy of saccadic compensation seems to be crucial for the presence of symptoms in unilateral vestibular hypofunction, highlighting the role of specific gaze stabilization exercises in rehabilitation. Early saccades, mainly triggered by the vestibular system, do not seem to compensate accurately enough, resulting in a relevant retinal error and the need for more as well as more accurate catch-up saccades, probably triggered by the visual system.}, language = {en} } @inproceedings{HenkelTorcheSchwiertzetal., author = {Henkel, Karsten and Torche, Mohamed and Schwiertz, Carola and Paloumpa, Ioanna and Sohal, Rakesh and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {Inorganic and organic layers for high-k and organic memory applications}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 41}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 41}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 127}, abstract = {We report about organic and inorganic MIS stacks for new possibilities for high frequency and high power applications as well as for non volatile memory cell. The organic stack contains a ferroelectric polymer as the functional layer. Poly[vinylidene fluoride trifluoroethylene] (P[VDF/TrFE]) is spin coated from a solution onto oxidised silicon substrates. We report on the polarisation induced flatband voltage shifts. For the inorganic stack our attempt is to combine higk-k dielectrics with high band gap semiconductors (SiC). Praseodymium oxide layers are prepared by electron beam evaporation from Pr6O11 powder and in situ controlling of interface and volume composition (XPS). Praseodymium silicate layers were prepared either by metal evaporation onto a thin ox- ide on top of the semiconductor and following annealing steps or by a wet chemical process out of aqueous Pr(NO3)3 solutions. Using spectro-scopic characterisation we investigate the stability of the various inter-faces within the stacks as well as the reactivity of the metal electrodes on thin Pr2O3. We report the results of electrical characterisation consisting of permittivity values, leakage current and density of interface states.}, language = {en} } @inproceedings{MuellerHenkelPaloumpaetal., author = {M{\"u}ller, Klaus and Henkel, Karsten and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {P(VDF/TrFE) as ferroelectric insulation layer for organic field effect transistors}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 41}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 41}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 101}, abstract = {The ferroelectric polymer poly(vinylidene fluoride trifluoroethylene)(P(VDF-TrFE)) is used as insulating material for organic field effect tran-sistors (OFET) and metal-insulator-semiconductor (MIS)-structures. For the MIS-structures, we find the typical hysteresis in the CV charac-teristic upon increasing the voltage scan window. Based on these results, we fabricate OFET with regioregular poly(3-hexlythiophene)(P3HT) as organic semiconductor. The transistors are constructed in bottom gate architecture with thin layers of spincoated P(VDF-TrFE) as gate insulation (100nm). The drain-source current of the OFET is reversible affected by the polarized gate, which gives opportunities for organic nonvolatile memory elements. We present characteristic features like the hysteretic drain current response or the data retention. Furthermore, we present measurements with Kelvin probe force microscopy, a method which gives informations on the lateral distributions of the surface potential.}, language = {en} } @misc{MuellerGoryachkoBurkovetal., author = {M{\"u}ller, Klaus and Goryachko, Andriy and Burkov, Yevgen and Schwiertz, Carola and Ratzke, Markus and K{\"o}ble, J. and Reif, J{\"u}rgen and Schmeißer, Dieter}, title = {Scanning Kelvin Probe Microscopy and Photoemission electron microscopy of organic source-drain structures}, series = {Synthetic Metals}, volume = {146}, journal = {Synthetic Metals}, number = {3}, issn = {0379-6779}, pages = {377 -- 382}, abstract = {n order to optimize organic field effect transistors (OFETs), the characterisation of active-layer surfaces in terms of their roughness, chemical composition and distribution of surface potentials is important. We report on high-resolution microscopic mapping of organic source-drain structures with P3HT as the semiconductor by scanning Kelvin probe microscopy (SKPM) and photoemission electron microscopy (PEEM). It was shown that PEEM is able to characterise the surface morphology (roughness), the chemical homogeneity and the composition of organic structures. The two-dimensional mapping of surface potentials by SKPM with applied source-drain voltages is shown to be an important ingredient of OFETs failure mode analysis.}, language = {en} } @incollection{MuellerBaerHenkeletal., author = {M{\"u}ller, Klaus and B{\"a}r, Werner and Henkel, Karsten and Jahnke, Agnes and Schwiertz, Carola and Schmeißer, Dieter}, title = {Organische Feldeffekttransistoren als Transducer in der Biosensorik}, publisher = {w.e.b.-Univ.-Verl.}, address = {Dresden}, isbn = {3-935712-92-8}, pages = {119 -- 223}, language = {de} } @misc{MuellerBaerHenkeletal., author = {M{\"u}ller, Klaus and B{\"a}r, Werner and Henkel, Karsten and Jahnke, Agnes and Schwiertz, Carola and Schmeißer, Dieter}, title = {Organische Feldeffekttransistoren als Transducer in der Biosensorik}, series = {Technisches Messen}, volume = {70}, journal = {Technisches Messen}, number = {12}, issn = {0171-8096}, doi = {10.1524/teme.70.12.565.20261}, pages = {565 -- 568}, abstract = {In diesem Beitrag wird der Einsatz neuartiger Sensortypen f{\"u}r die medizinische Diagnostik beschrieben. Diese Sensoren sollen komplett organisch sein und auf dem Prinzip des Feldeffekttransistors basieren. Als Modellsystem f{\"u}r die Anwendung in der Biosensorik soll die Einsatzm{\"o}glichkeit dieser Sensoren in der nicht-invasiven Diagnostik der Helicobacter-pylori-Infektion {\"u}berpr{\"u}ft werden.}, language = {de} } @misc{MuellerHenkelMikaloetal., author = {M{\"u}ller, Klaus and Henkel, Karsten and Mikalo, Ricardo Pablo and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Elektronik mit organischen Materialien}, publisher = {BTU Cottbus, Eigenverlag}, abstract = {Plastikelektronik, flexible Solarzellen, intelligente Kleidung, neuartige und maßgeschneiderte Transducer f{\"u}r die Gas-, Fl{\"u}ssigkeits- und Biosensorik, all dies sind Anwendungen, die ohne halbleitende Polymere nicht denkbar w{\"a}ren und die Bereiche erschließen, in denen zur Zeit eine regelrechte Goldgr{\"a}berstimmung herrscht. Mit wichtigen Beitr{\"a}gen im Grundlagen- und Anwendungsbereich nimmt die BTU Cottbus an dieser Entwicklung teil, u. a. auch durch eine Kooperation mit dem Institut f{\"u}r Mikrobiologie des Carl-Thiem-Klinikums Cottbus.In diesem Artikel werden die Voraussetzungen f{\"u}r die Konstruktion organischer Feldeffekt-Transistoren mit gassensitiver Gate-Elektrode vorgestellt. Untersuchungen zur elektronischen Struktur des organischen Halbleiters Poly(3-Hexylthiophen), die Anwendung dieses Materials als aktive Schicht in organischen Feldeffekt-Transitoren, die Gassensitivit{\"a}t von Polypyrrolelektroden auf Quarz-Mikrowaagen und die Mikrorstukturierung organischer Elektroden werden beschrieben.}, language = {de} } @inproceedings{MuellerHenkelPaloumpaetal., author = {M{\"u}ller, Klaus and Henkel, Karsten and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Low-cost-Plot-Technologie fur die Mikrostrukturierung von Gassensoren}, series = {Sensoren im Fokus neuer Anwendungen, 5. Dresdner Sensor-Symposium, 10. - 12. Dezember 2001, Dresden}, booktitle = {Sensoren im Fokus neuer Anwendungen, 5. Dresdner Sensor-Symposium, 10. - 12. Dezember 2001, Dresden}, publisher = {w.e.b. Universit{\"a}tsverlag}, address = {Dresden}, isbn = {3-935712-71-5}, pages = {166 -- 169}, abstract = {Bei der Herstellung von Mikrosensoren ist die Strukturierung von Elektroden oder elektrischen Zu-leitungen mit einem hohen Miniaturisierungsgrad ein entscheidender Punkt. Dazu m{\"u}s-sen h{\"a}ufig teure Verfahren (Lithographie, Maskentechniken) herangezogen werden.Dieser Beitrag beschreibt eine low-cost-Technologie zur Herstellung organischer Mikrostrukturen f{\"u}r elektronische und messtechnische Anwendungen im Bereich der Sensorik. Geplottete Strukturen mit Polypyrrol und Poly(3,4-Ethylen-Dioxy-Thiophen), dotiert mit Polystyrolsulfonat (PEDOT/PSS) wurden als Widerstandssensoren f{\"u}r die Detektion von Luftfeuchte ein-gesetzt. Die prinzipielle Ein-satzm{\"o}glichkeit unserer Technik im Bereich der organischen Elektronik konnten wir mit dem Bau organischer Feldeffekttransistoren nachweisen. Mit einem computergesteu-erten Plotter des Typs Rol-land DXY-1150A, Plot-Kapillaren f{\"u}r das Tuschezeichnen, handels{\"u}blichen Folien f{\"u}r wasserl{\"o}sliche Tinten als Substrat und kolloidalen Graphit als leitendes Material konnten wir Aufl{\"o}sungen, das heißt insbesondere Kanalbreiten bzw. Elektrodenabst{\"a}nde im Bereich von 20+10\%B5m (auf 2cm L{\"a}nge) her-stellen.}, language = {de} } @article{MuellerHoffmannMilkoetal., author = {M{\"u}ller, Klaus and Hoffmann, Patrick and Milko, S. and Burkov, Yevgen and Schmeißer, Dieter}, title = {PEEM and µ-NEXAFS of Cu-In-S-Surfaces}, abstract = {The composition of CuInS2-films tends to differ from the ideal ratio of 1:1:2. A molecularlyvariation of dm=[Cu]/[In]-1 not equal 0 occurs due to the formation of binary phases as segregation's at the surface, as crystallites in the bulk of the film or at the surface of grains [1]. Furthermore, the range of homogeneity of the phase CuInS2 is relatively large caused by a low enthalpy of formation of defects like Cu-vacancies [2]. Segregation's at surfaces can be removed by KCN etching or by an electrochemical process [3, 4] We investigated the effect of an in-situ-heat-treatment of samples, prepared in the Cu-rich regime with additional amounts of copper, deposited on the surface of the Cu-In-S-films.We used Cu-In-S-films on molybdenum, prepared from precursors of Cu/In and a following reactive annealing-process in a sulphur-atmosphere. The experiments were performed as follows: The surface of the films was cleaned in situ to remove CuS-Phases by Argon-bombardment. The thin layers of additional Copper were prepared by evaporation of copper metal in Knudsen-cells. The thickness of this copper-films is in the range of monolayers, revealed by a calibration with copper on iron-substrates. After this deposition the samples were heated up to several temperatures (up to 550 ºC) for ten minutes, respectively. Here the molybdenum back-contact was used as electrical heater.}, language = {en} } @misc{SchmeisserTallaridaHenkeletal., author = {Schmeißer, Dieter and Tallarida, Massimo and Henkel, Karsten and M{\"u}ller, Klaus and Mandal, Dipankar and Chumakov, Dmytro and Zschech, Ehrenfried}, title = {Characterization of oxidic and organic materials with synchrotron radiation based XPS and XAS}, language = {en} } @misc{MuellerBrandlCadotteetal., author = {M{\"u}ller, J{\"o}rg and Brandl, Roland and Cadotte, Marc W. and Heibl, Christoph and B{\"a}ssler, Claus and Weiß, Ingmar and Birkhofer, Klaus}, title = {A replicated study on the response of spider assemblages to regional and local processes}, series = {Ecological Monographs}, volume = {92}, journal = {Ecological Monographs}, number = {3}, issn = {1557-7015}, doi = {10.1002/ecm.1511}, pages = {1 -- 19}, abstract = {Understanding species richness variation among local communities is one of the central topics in ecology, but the complex interplay of regional processes, environmental filtering, and local processes hampers generalization on the importance of different processes. Here, we aim to unravel drivers of spider community assembly in temperate forests by analyzing two independent data sets covering gradients in elevation and forest succession. We test the following four hypotheses: (H1) spider assemblages within a region are limited by dispersal, (H2) local environment has a dominant influence on species composition and (H3) resources, and (H4) biotic interactions both affect species richness patterns. In a comprehensive approach, we studied species richness, abundance, taxonomic composition, and trait-phylogenetic dissimilarity of assemblages. The decrease in taxonomic similarity with increasing spatial distance was very weak, failing to support H1. Functional clustering of species in general and with canopy openness strongly supported H2. Moreover, this hypothesis was supported by a positive correlation between environmental and taxonomic similarity and by an increase in abundance with canopy openness. Resource determination of species richness (H3) could be confirmed only by the decrease of species richness with canopy cover. Finally, decreasing species richness with functional clustering indicating effects of biotic interactions (H4) could only be found in one analysis and only in one data set. In conclusion, our findings indicate that spider assemblages within a region are mainly determined by local environmental conditions, while resource availability, biotic interactions and dispersal play a minor role. Our approach shows that both the analysis of different aspects of species diversity and replication of community studies are necessary to identify the complex interplay of processes forming local assemblages.}, language = {en} } @misc{KoenigMuellerHoeschler, author = {K{\"o}nig, Paul and M{\"u}ller, Phillip and H{\"o}schler, Klaus}, title = {Assessment of (hybrid)-electric drive-train architectures for future aircraft applications}, series = {Journal of Physics: Conference Series}, volume = {2526}, journal = {Journal of Physics: Conference Series}, issn = {1742-6596}, doi = {10.1088/1742-6596/2526/1/012023}, abstract = {Future regional aircraft and propulsion systems will have to address both a growing market and stricter environmental constraints. Besides the increase of component efficiencies, the technological transformation from conventional to (hybrid)-electric propulsion systems represents a paradigm shift with great potential for the aviation industry. In this context, economic, market-relevant as well as technological boundary conditions for the electrical and mechanical components are developed in this paper for a reference regional aircraft and are based on current research results from different institutions. The propulsion performance analysis of a conventional turboprop is compared and evaluated with a serial-hybrid and a fully-electric configuration (both battery-electric), status today as well as status ~2035, as an example, whereby the presented process can also be applied to other hybrid configurations too. An energy-optimised propulsion and operating concept is derived with regard to minimum resulting system weight. The results of this analysis help to define necessary boundary conditions for future subsystem investigations and identify key research items, especially in the field of the battery.}, language = {en} } @incollection{Mueller, author = {M{\"u}ller, Klaus}, title = {Untersuchungen auf der Akropolis von Assos}, series = {Assos - Neue Forschungsergebnisse zur Baugeschichte und Arch{\"a}ologie der s{\"u}dlichen Troas}, booktitle = {Assos - Neue Forschungsergebnisse zur Baugeschichte und Arch{\"a}ologie der s{\"u}dlichen Troas}, editor = {Arslan, Nurettin and Mohr, Eva-Maria and Rheidt, Klaus}, publisher = {Habelt}, address = {Bonn}, isbn = {978-3-7749-3951-6}, pages = {53 -- 83}, language = {de} }