@incollection{SeidlitzUlkeWinterKukeetal., author = {Seidlitz, Holger and Ulke-Winter, Lars and Kuke, Felix and Ost, Lucas}, title = {Material and Load Path Appropriate Joining Techniques for FRP/Metal Hybrid Structures}, series = {Welding - Materials, Fabrication Processes, and Industry 5.0}, booktitle = {Welding - Materials, Fabrication Processes, and Industry 5.0}, editor = {Kumar, Sanjeev}, edition = {1. Auflage}, publisher = {IntechOpen}, address = {London}, isbn = {978-1-83769-870-7}, doi = {10.5772/intechopen.1002239}, abstract = {Fiber-reinforced plastics (FRP) offer great lightweight construction potential. However, the anisotropic high-performance materials can only be fully utilized through the development of material-specific joining processes. A literature study shows that conventional methods such as screwing, riveting and bolting are unsuitable, since the load-bearing fibers are severed in the joining region. This leads to high-stress concentrations. To reduce these, a method is presented in which through holes are created in thermoplastic FRP by reorienting the fibers in this area around the point of disruption in accordance with the load path. For this purpose, the polymer matrix is softened locally by applying heat and penetrated with a needle or mandrel. Based on this, a technology for material-specific joining of FRP and metals has been developed in the form of thermomechanical flow drill joining. In this process, a mandrel forms a bush from the metal component and deflects the fibers of the locally softened organic sheet to suit the material. Cold metal transfer (CMT) pin welding is presented as another fully automatable joining process. In this method, the softened plastic component is penetrated with the welding wire, displacing the fibers in the joining area and realigning them to suit the load path.}, language = {en} } @misc{SeidlitzOstAmbrosioetal., author = {Seidlitz, Holger and Ost, Lucas and Ambrosio, Marcello and Kuke, Felix and Michailov, Vesselin and Shapovalov, Oleg and Doynov, Nikolay}, title = {Erw{\"a}rmung von Composites simulieren}, series = {Kunststoffe}, journal = {Kunststoffe}, number = {2}, issn = {0023-5563}, pages = {66 -- 70}, abstract = {Neuartige, werkstoffgerechte F{\"u}geverfahren f{\"u}r Faserkunststoffverbunde setzen die Erw{\"a}rmung der Materialien voraus. Um die damit verbundenen komplexen Temperaturfelder und -verl{\"a}ufe vorherzusagen, haben das Fraunhofer IAP und die BTU Cottbus-Senftenberg numerische Verfahren entwickelt. Mit diesen k{\"o}nnen auch verschiedene Strahlungsquellen und Prozessabl{\"a}ufe simuliert werden.}, language = {de} } @misc{ShapovalovOstKukeetal., author = {Shapovalov, Oleg and Ost, Lucas and Kuke, Felix and Doynov, Nikolay and Ambrosio, Marcello and Seidlitz, Holger and Michailov, Vesselin}, title = {Entwicklung und Analyse einer F{\"u}gestrategie f{\"u}r FKV/Metall-Mischverbindungen auf Basis der CMT-Pinschweißtechnik}, series = {Joining Plastics}, volume = {17}, journal = {Joining Plastics}, number = {1}, issn = {1864-3450}, pages = {28 -- 35}, abstract = {Dieser Beitrag stellt eine Entwicklung, Anpassung und Untersuchung der neuartigen Pinschweißtechnik zur Verbindung thermoplastischer Faserkunststoffverbunde mit metallischen F{\"u}gepartnern dar. Die untersuchte F{\"u}getechnik bietet, im Vergleich zu anderen Verfahren, neben einer einseitigen Zug{\"a}nglichkeit, ein hohes Leichtbaupotenzial. An Multimaterial-Einzelpinverbindungen wurden die CMT-Pinschweißbarkeit charakterisiert und unterschiedliche F{\"u}gestrategien erprobt und ausgewertet. Als Bewertungskriterien wurden das Schweißgut sowie der Faser- und Matrixerhalt in Abh{\"a}ngigkeit von den Schweißparametern untersucht. Die mechanische Beanspruchbarkeit der mit dem entwickelten Verfahren erstellten Verbindungen wurde in Scherzugversuchen ermittelt. An Mehrpinverbindungen wurde anschließend der Einfluss der Pinanordnung untersucht und die Auslegung der F{\"u}gezone analysiert. Der F{\"u}geprozess wurde an Funktionsmustern und diese wiederum in 3-Punkt-Biegeversuchen validiert sowie mit dem Kleben verglichen.}, language = {de} } @misc{SeidlitzMichailovOstetal., author = {Seidlitz, Holger and Michailov, Vesselin and Ost, Lucas and Kuke, Felix and Ambrosio, Marcello and Shapovalov, Oleg and Doynov, Nikolay}, title = {Simulation of Composites' Heating}, series = {Kunststoffe international}, volume = {113}, journal = {Kunststoffe international}, number = {4}, issn = {1862-4243}, pages = {60 -- 64}, abstract = {Modern material-compatible joining methods for fiber-reinforced plastics require the heating of the materials. In order to predict the respective complex temperature fields and curves, the Fraunhofer IAP and the BTU Cottbus-Senftenberg have developed numerical methods, which are able to simulate different radiation sources and process sequences as well.}, language = {en} }