@misc{KolanekTallaridaKaravaevetal., author = {Kolanek, Krzysztof and Tallarida, Massimo and Karavaev, Konstantin and Schmeißer, Dieter}, title = {In situ studies of the atomic layer deposition of thin HfO2 dielectrics by ultra high vacuum atomic force microscope}, language = {en} } @misc{KolanekTallaridaSchmeisser, author = {Kolanek, Krzysztof and Tallarida, Massimo and Schmeißer, Dieter}, title = {Atomic layer deposition of HfO2 investigated in situ by means of a noncontact atomic force microscopy}, language = {en} } @misc{KolanekTallaridaSchmeisser, author = {Kolanek, Krzysztof and Tallarida, Massimo and Schmeißer, Dieter}, title = {Height distribution of atomic force microscopy images as a tool for atomic layer deposition characterization}, series = {Journal of Vacuum Science and Technology : A}, volume = {31}, journal = {Journal of Vacuum Science and Technology : A}, number = {1}, doi = {10.1116/1.4754557}, pages = {01A104-1 -- 01A104-9}, abstract = {The authors propose the analysis of surface height histograms as a tool for the atomic layer deposition (ALD) growth characterization in the initial stage of the process. ALD of HfO2 on a Si(100)/SiO2 substrate was investigated in situ by ultra high vacuum atomic force microscope working in noncontact mode. The ALD cycles, made by using tetrakis-di-methyl-amido-Hf and H2O as precursors, were performed at 230 C. After each ALD cycle, the relation between the film growth and the root mean square surface roughness was studied. Parameters equivalent to HfO2 layer thickness, coverage, and surface roughness of the substrate and deposited material can be calculated in the proposed routine.}, language = {en} } @misc{KolanekTallaridaMichlingetal., author = {Kolanek, Krzysztof and Tallarida, Massimo and Michling, Marcel and Schmeißer, Dieter}, title = {In situ study of the atomic layer deposition of HfO2 on Si}, series = {Journal of Vacuum Science and Technology}, journal = {Journal of Vacuum Science and Technology}, number = {A 30}, issn = {0734-2101}, pages = {01A143-1 -- 01A143-15}, language = {en} } @misc{KlocekKolanekSchmeisser, author = {Klocek, Jolanta and Kolanek, Krzysztof and Schmeißer, Dieter}, title = {Spectroscopic and atomic force microscopy investigations of hybrid materials composed of fullerenes and 3-aminopropyltrimethoxysilane}, series = {Journal of Physics and Chemistry of Solids}, volume = {73}, journal = {Journal of Physics and Chemistry of Solids}, number = {5}, issn = {0022-3697}, pages = {699 -- 706}, language = {en} } @misc{KolanekTallaridaMichlingetal., author = {Kolanek, Krzysztof and Tallarida, Massimo and Michling, Marcel and Karavaev, Konstantin and Schmeißer, Dieter}, title = {Atomic layer deposition reactor for fabrication of metal oxides}, language = {en} } @misc{TallaridaWeisheitKolaneketal., author = {Tallarida, Massimo and Weisheit, Martin and Kolanek, Krzysztof and Michling, Marcel and Engelmann, Hans-J{\"u}rgen and Schmeißer, Dieter}, title = {Atomic layer deposition of nanolaminate oxide films on Si}, series = {Journal of Nanoparticle Research}, volume = {13}, journal = {Journal of Nanoparticle Research}, number = {11}, doi = {10.1007/s11051-011-0319-x}, pages = {5975 -- 5983}, language = {en} } @inproceedings{MichlingKolanekSchmeisseretal., author = {Michling, Marcel and Kolanek, Krzysztof and Schmeißer, Dieter and Tallarida, Massimo}, title = {A growth model for the HfO2 ALD process}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 294}, abstract = {In this contribution we report on our in-situ2 cycle-by-cycle (up to the 25 cycles) investigation of the HfO2 atomic layer deposition (ALD) process using the method of x-ray photoelectron spectroscopy (XPS) and electron energy loss spectroscopy (EELS). We used Tetrakis-Dimethyl-Amino-Hafnium (TDMA-Hf) and H2O as precursors and p-type Si wafer with native oxide as a substrate. The XPS measurements were carried out at BESSY II in Berlin with primary energies of 150 eV and 640 eV and the EELS measurements were done with a primary energy of 50 eV. We measured the O1s, Si2p core level and the valence band including the Hf 4f core level. From the Hf4f to Si2p ratios taken at each energy we developed a growth model for the first monolayer and for the following layers too. From our data we conclude, that in the first monolayer up to the fourth ALD cycle an island growth occurs. The height of these islands is about 0,5nm. After the first monolayer is completed, a layer- by-layer growth can be expected. In order to proof this observation we have simulated the Hf/Si ratio for different excitation energies and found a very good agreement with our measurement data. The EELS data especially the evaluation of the loss function onset confirm our growth model.}, language = {en} } @inproceedings{MichlingTallaridaKolaneketal., author = {Michling, Marcel and Tallarida, Massimo and Kolanek, Krzysztof and Schmeißer, Dieter}, title = {In-situ EELS and UPS measurements on HfO2 ALD layers}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, abstract = {In this contribution we report on our in-situ cycle-by-cycle (up to 10 cycles) investigations of the HfO2 ALD process using the methods of EELS and UPS. We used TDMA-Hf as a precursor and p-type Si wafer with natural oxide as the substrate. The EELS measurements were done with a primary energy of 52,5 eV and the UPS measurements with He I (21,218 eV). The change in the onset of the loss function is readily observed. Already after two cycles the value approach to the bulk value of HfO2. Upon ALD growth there is a remarkable decrease in the intensity of states within the gap. They are rather smooth and saturate after 10 cycles. With UPS we follow the variation of the VB onset and changes in the secondary electron onset. We summarize our data in a band diagram not based on bulk values but on cycle dependent quantities. With these cycle-by-cycle experiments we study the initial growth of HfO2 especially in the very first cycles.}, language = {en} } @inproceedings{KolanekKaravaevTallaridaetal., author = {Kolanek, Krzysztof and Karavaev, Konstantin and Tallarida, Massimo and Schmeißer, Dieter}, title = {Atomic layer deposition of HfO2 onto SiO2 substrates investigated in-situ by non-contact UHV/AFM}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 248}, abstract = {We investigated in-situ the atomic layer deposition (ALD) of HfO2 onto SiO2 substrates with ultra high vacuum (UHV) non-contact atomic force microscope (NC-AFM). The ALD process was started after detailed analysis of the initial Si(001)/SiO2 substrate. The ALD cycles, made by using tetrakis-di-methyl-amido-Hf (TDMAHf) and water as precursors, were performed on the SiO2 substrate maintained at 230 ∘C. We studied the relation between the film growth and the root mean square surface roughness, surface skewness, kurtosis, fractal dimension and correlation length. In the initial stages of the ALD process with our analysis of the surface height histograms we were capable of determination: HfO2 layer thickness, surface coverage and surface roughness of a substrate and deposited material. Observation of the surface height histograms evolution during deposition allowed us to verify conformal and effective ALD growth on SiO2 substrate. With this detailed analysis of the surface topography we confirmed the completion of the first HfO2 layer after four ALD cycles.}, language = {en} } @inproceedings{KolanekTallaridaKaravaevetal., author = {Kolanek, Krzysztof and Tallarida, Massimo and Karavaev, Konstantin and Schmeißer, Dieter}, title = {In situ measurements of the atomic layer deposition of high-k dielectrics by atomic force microscope for advanced microsystems}, series = {International Students and Young Scientists Workshop "Photonics and Microsystems", 2009, 25 - 27 June 2009, Harz University, Wernigerode, Germany}, booktitle = {International Students and Young Scientists Workshop "Photonics and Microsystems", 2009, 25 - 27 June 2009, Harz University, Wernigerode, Germany}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-4244-4303-1}, pages = {47 -- 51}, language = {en} } @inproceedings{TallaridaKaravaevKolaneketal., author = {Tallarida, Massimo and Karavaev, Konstantin and Kolanek, Krzysztof and Schmeißer, Dieter}, title = {Nobel "in-situ2" Approach to Modified ALD Processes for Nano-functional Metals Oxide Films}, language = {en} } @misc{KaravaevKolanekTallaridaetal., author = {Karavaev, Konstantin and Kolanek, Krzysztof and Tallarida, Massimo and Schmeißer, Dieter}, title = {In-Situ Studies of ALD Growth of Hafnium Oxide Films}, language = {en} } @inproceedings{KolanekKaravaevTallaridaetal., author = {Kolanek, Krzysztof and Karavaev, Konstantin and Tallarida, Massimo and Schmeißer, Dieter}, title = {In-situ investigations of the atomic layer deposition of HfO2 with UHV/AFM}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 160}, abstract = {We studied in-situ the atomic layer deposition (ALD) of HfO2 with ultra high vacuum (UHV) atomic force microscope (AFM), using the ALD reactor developed by our group [1, 2]. The reactor was attached to the Omicron Large Sample-UHV/AFM system in the AFM-Lab of the Angewandte Physik-Sensorik chair at the BTU-Cottbus. We investigated different Si(001)/SiO2 substrates and surface preparation techniques performed before the ALD process. After each ALD cycle (using TDMAHf and H2O as precursors), we studied the influence of the HfO2 growth on the root mean square (RMS) roughness; the surface fractal dimension and the height histogram: the surface skewness and kurtosis. We focused on the influence of the substrate temperature on the surface topography during the ALD. The in-situ studies of the ALD process with the UHV/AFM system correlated with the experiments performed with photoelectron spectroscopy can be used for understanding the fundamental properties of the ALD of HfO2 on Si(001). [1] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Appl. Phys. 104, 064116 (2008); [2] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Vac. Sci. Technol. B, accepted for publication.}, language = {en} } @inproceedings{TallaridaKaravaevKolaneketal., author = {Tallarida, Massimo and Karavaev, Konstantin and Kolanek, Krzysztof and Schmeißer, Dieter}, title = {Basics of the atomic layer deposition of HfO2 onto Si/SiO2 substrates: in-situ investigations with XPS, XAS and UHV-AFM}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S. 159}, abstract = {We developed a reactor for investigating in-situ the atomic layer deposition (ALD) of HfO2. X-ray photoelectron and X-ray absorption spectra were collected after each ALD cycle using synchrotron radiation at the beamline U49-2/PGM2 - BESSY II, Berlin. The morphology of the substrate and thin film surfaces was investigated after each ALD cycle with an UHV-AFM microscopy attached to the ALD reactor. We studied the ALD on differently prepared substrates, at different substrate temperatures, and using different Hf-precursors (HfCl4, TEMAHf, TDMAHf). We observed the evolution of the Si/SiO2/HfO2 system during the formation of the first three Hf-oxide layers [1]; we detected the incorporation of Cl into the Hf-oxide films and proposed a mechanism responsible for the Cl contamination [2]; we found evidence of the interfacial-SiO2 growth during the initial ALD cycles and of dipole formation at the HfO2/SiO2 interface. In this contribution we illustrate the basics of the technique used, and discuss the physical-chemical properties of ALD on the basis of the experimental results. [1] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Appl. Phys. 104, 064116 (2008); [2] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Vac. Sci. Technol. B, accepted for publication.}, language = {en} } @inproceedings{TallaridaKaravaevKolaneketal., author = {Tallarida, Massimo and Karavaev, Konstantin and Kolanek, Krzysztof and Schmeißer, Dieter}, title = {In-situ experimental approach to the study of atomic layer deposition with atomic force microscope, X-ray photoelectron and X-ray absorption spectroscopy}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, pages = {S.176}, abstract = {We describe our experimental approach to the investigation of atomic layer deposition (ALD). ALD is a powerful deposition technique for growing conformal thin films of composite materials with atomically accurate thickness on large area [1]. Despite the enormous industrial interest growing around ALD, its fundamental properties were not yet properly studied. We developed an ALD reactor for the in-situ investigations using XPS, XAS and AFM as experimental techniques. We studied the chemical-physical properties of the growing thin films after each deposition cycle. Here, we illustrate the recent results concerning the ALD of HfO2 obtained using different Hf-precursors on various substrates [2]. We show how the in-situ investigations could deliver an important insight into the fundamental characteristics of ALD and how these information could be used to modify and optimize the deposition parameters. [1] M. Leskel{\"a}, M. Ritala, Thin Solid Films, 409, 138, 2002; [2] M. Tallarida, K. Karavaev, and D. Schmeisser, J. Appl. Phys. 104, 064116 (2008).}, language = {en} } @misc{KlocekKolanekHenkeletal., author = {Klocek, Jolanta and Kolanek, Krzysztof and Henkel, Karsten and Zschech, Ehrenfried and Schmeißer, Dieter}, title = {Influence of the fullerene derivatives and cage polyhedral oligomeric silsesquioxanes on 3-aminopropyltrimethoxysilane based hybrid nanocomposites chemical, morphological and electrical properties}, series = {Journal of Physics and Chemistry of Solids}, volume = {74}, journal = {Journal of Physics and Chemistry of Solids}, number = {1}, issn = {0022-3697}, doi = {10.1016/j.jpcs.2012.08.013}, pages = {135 -- 145}, abstract = {In this study we produced 3-aminopropyltrimethoxysilane based hybrid nanocomposites using fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as nanodopants. Additionally, we modified obtained material with incompletely condensed cage polyhedral oligomeric silsesqiuox-anes (POSS) in order to improve its properties. Thin films were deposited by means of the spin-coating method. The films were characterized by atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and capacitance-voltage (CV) measurements. We observed that a properly chosen PCBM concentration may be a crucial factor to obtain high quality APTMS based films by the spin-coating technique. XPS revealed the presence of the C-NH-C species within POSS containing films indicating chemical interaction between the amino group of APTMS and the POSS molecules. AFM results suggest that at high POSS monomer concentration in the range of 1\% the creation of fractal-shaped aggregates takes place. The CV characterization of the samples exhibits a decrease of the APTMS based films dielectric constant due to the POSS and PCBM contribution. The combination of the applied methods delivers complementary information concerning the properties of the analyzed films.}, language = {en} } @misc{KlocekHenkelKolaneketal., author = {Klocek, Jolanta and Henkel, Karsten and Kolanek, Krzysztof and Zschech, Ehrenfried and Schmeißer, Dieter}, title = {Spectroscopic and capacitance-voltage characterization of thin aminopropylmethoxysilane films doped with copper phthalocyanine, tris(dimethylvinylsilyloxy)-POSS and fullerene cages}, series = {Applied surface science}, volume = {258}, journal = {Applied surface science}, number = {10}, issn = {0169-4332}, pages = {4213 -- 4221}, language = {en} } @inproceedings{BroczkowskaKlocekFriedrichetal., author = {Broczkowska, K. and Klocek, Jolanta and Friedrich, Daniel and Henkel, Karsten and Kolanek, Krzysztof and Urbanowicz, A. and Schmeißer, Dieter and Miller, M. and Zschech, Ehrenfried}, title = {Fullerene based materials for ultra-low-k application}, series = {International Students and Young Scientists Workshop "Photonics and Microsystems", Szklarska, Poreba, Poland, 25 - 27 June 2010}, booktitle = {International Students and Young Scientists Workshop "Photonics and Microsystems", Szklarska, Poreba, Poland, 25 - 27 June 2010}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-4244-8324-2}, pages = {39 -- 43}, language = {en} } @misc{KlocekHenkelKolaneketal., author = {Klocek, Jolanta and Henkel, Karsten and Kolanek, Krzysztof and Broczkowska, K. and Schmeißer, Dieter and Miller, M. and Zschech, Ehrenfried}, title = {Studies of the chemical and electrical properties of fullerene and 3-aminopropyltrimethoxysilane based low-k materials}, series = {Thin Solid Films}, volume = {520}, journal = {Thin Solid Films}, number = {7}, issn = {0040-6090}, pages = {2498 -- 2504}, language = {en} } @misc{KlocekHenkelKolaneketal., author = {Klocek, Jolanta and Henkel, Karsten and Kolanek, Krzysztof and Zschech, Ehrenfried and Schmeißer, Dieter}, title = {Annealing influence on siloxane based materials incorporated with fullerenes, phthalocyanines and silsesquioxanes}, series = {BioNanoScience}, volume = {2}, journal = {BioNanoScience}, number = {1}, issn = {2191-1630}, pages = {52 -- 58}, language = {en} } @misc{KolanekHermannDudeketal., author = {Kolanek, Krzysztof and Hermann, Peter and Dudek, Piotr T. and Gotszalk, Teodor and Chumakov, Dmytro and Weisheit, Martin and Hecker, Michael and Zschech, Ehrenfried}, title = {Local anodic oxidation by atomic force microscopy for nano-Raman strain measurements on silicon-germanium thin films}, series = {Thin Solid Films}, volume = {518}, journal = {Thin Solid Films}, number = {12}, issn = {0040-6090}, pages = {3267 -- 3272}, language = {en} }