@misc{WangLiRobraetal., author = {Wang, Jian and Li, Zheng and Robra, J{\"o}rgen and Pasternak, Hartmut and Euler, Mathias}, title = {Investigation on Shear Buckling of Corrugated Web Beams with Reinforced Web Openings}, series = {ce/papers}, volume = {5}, journal = {ce/papers}, number = {4}, issn = {2509-7075}, doi = {10.1002/cepa.1800}, pages = {628 -- 634}, abstract = {Corrugated web beams are welded I-sections with thin-walled sinusoidal corrugated webs and flanges made of wide flat steel that have been developed as an alternative to steel girders with flat webs. In comparison with hot-rolled or welded I-beams with flat webs, corrugated web beams are connected with considerable material savings and fully automated production. Assuming the same load-bearing capacity, corrugated web beams are lighter than those with a flat web, since the corrugated web beams can often be loaded up to their plastic resistance without reinforcement of the web. The research on the load-bearing behavior of corrugated web beams without web openings is relatively mature. However, the resistance of corrugated web beams with reinforced web openings, as they are often used in buildings for installations, has not well experimentally been investigated, yet. This paper deals with the shear resistance of corrugated web beams with reinforced square web openings. Three specimens of different geometry with two square web openings were tested. The experiments are compared with a Finite Element Analysis by Abaqus® and with an analytical model allowing simplified calculation. Both models can relatively accurately calculate the shear resistance. The experimental and numerical results show that the increase of the shear resistance of perforated corrugated web beams depends on the wall-thickness and the steel grade of the web opening reinforcement.}, language = {en} } @misc{WangLiEuler, author = {Wang, Jian and Li, Zheng and Euler, Mathias}, title = {Shear force resistance of plate girders with trapezoidally corrugated webs and reinforced web openings}, series = {Nordic Steel Construction Conference 2024, The 15th Nordic Steel Construction Conference, June 26-28, 2024, Lule{\aa}, Sweden}, journal = {Nordic Steel Construction Conference 2024, The 15th Nordic Steel Construction Conference, June 26-28, 2024, Lule{\aa}, Sweden}, doi = {10.5281/zenodo.12209595}, pages = {10}, abstract = {Corrugated web beams are an alternative to steel girders with flat webs. They consist of a welded Isection with a thin-walled trapezoidally corrugated web and flanges made of wide flat steel. In comparison with hot-rolled or welded I-beams with flat webs, corrugated web beams offer significant material savings and are produced fully automated. Assuming the same load-bearing capacity, corrugated web beams are lighter than those with a flat web, since the corrugated web beams can often be loaded up to their plastic resistance without reinforcement of the web. Research on the loadbearing behaviour of corrugated web beams without web openings is well-established. However, the resistance of corrugated web beams with reinforced web openings, which are necessary for installations in buildings, has not been well investigated experimentally yet. This paper examines the shear force resistance of trapezoidally corrugated web beams with reinforced square web openings. Two beam-like specimens with the same geometry but differently reinforced web openings were tested. The experimental results are compared with a Finite Element Analysis using Abaqus® and with an analytical model that allows a simplified calculation. The comparison identifies how the wall thickness of the web opening reinforcement affects the shear force resistance of perforated corrugated web beams.}, language = {en} } @misc{WangEuler, author = {Wang, Jian and Euler, Mathias}, title = {Trapezstegtr{\"a}ger mit versteiften quadratischen Steg{\"o}ffnungen}, series = {24. DASt-Forschungskolloquium, 5. und 6. M{\"a}rz 2024}, journal = {24. DASt-Forschungskolloquium, 5. und 6. M{\"a}rz 2024}, address = {D{\"u}sseldorf}, pages = {102 -- 106}, abstract = {Im Rahmen des Beitrags wird das Tragverhalten von Trapezstegtr{\"a}gern mit quadra tischen {\"O}ffnungen und {\"O}ffnungskr{\"a}nzen (umlaufende Versteifung) als Verst{\"a}r kungsmaßnahme untersucht. Die Ergebnisse aus zwei Traglastversuchen und einer umfangreichen numerischen Parameterstudie (FE-Berechnungen) zum Tragverhal ten von Trapezstegtr{\"a}gern mit versteiften quadratischen Steg{\"o}ffnungen werden vor gestellt. In der Parameterstudie werden die Einfl{\"u}sse der Kranzdicke und der geo metrischen Imperfektionen auf die Querkrafttragf{\"a}higkeit der Trapezstegtr{\"a}ger un tersucht. Schlussendlich wird ein praxisnaher Bemessungsvorschlag zur Ermittlung der Querkrafttragf{\"a}higkeit von Trapezstegtr{\"a}gern mit versteiften Steg{\"o}ffnungen vor gestellt.}, language = {de} } @misc{WangEulerPasternaketal., author = {Wang, Jian and Euler, Mathias and Pasternak, Hartmut and Li, Zheng and Krausche, Thomas and Launert, Benjamin}, title = {Bending capacity of single and double-sided welded I-section girders: Part 1: Experimental investigations}, series = {Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems : Proceedings of The Eighth International Conference on Structural Engineering, Mechanics and Computation, 5-7 September 2022, Cape Town, South Africa}, journal = {Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems : Proceedings of The Eighth International Conference on Structural Engineering, Mechanics and Computation, 5-7 September 2022, Cape Town, South Africa}, publisher = {CRC Press}, address = {Boca Raton}, isbn = {978-1-00-334845-0}, doi = {10.1201/9781003348443-159}, pages = {975 -- 980}, abstract = {The lateral-torsional buckling resistance of welded steel girders is affected by their residual stresses and geo-metric imperfections. Generally, both influences are mainly controlled by the manufacturing process, in partic-ular the welding of the girder. This paper presents experimental investigations on four laterally unbraced welded steel girders with thin-walled I-sections, whose flange-to-web junctions are welded from one or two sides to evaluate the fabrication influence. The investigations include lateral-torsional buckling tests under combined bending and torsion loading caused by three-point bending due to an eccentric vertical single force. The geometric imperfections of the welded test girders are determined by 3D laser scanning. The test results show that the influence of the geometric imperfections and the residual stresses on the lateral-torsional buck-ling resistance is limited for the tested girders.}, language = {en} } @misc{WangLiEuler, author = {Wang, Jian and Li, Zheng and Euler, Mathias}, title = {Investigation on shear buckling of steel welded I-section beams with reinforced web openings}, series = {ce/papers}, volume = {6}, journal = {ce/papers}, number = {3-4}, doi = {10.1002/cepa.2361}, pages = {1754 -- 1760}, language = {en} } @misc{WangLiPasternaketal., author = {Wang, Jian and Li, Zheng and Pasternak, Hartmut and Euler, Mathias}, title = {Shear Buckling Behavior of Tapered Steel Plate Girders with Sinusoidally Corrugated Webs}, series = {ce/papers}, volume = {6}, journal = {ce/papers}, number = {3-4}, issn = {2509-7075}, doi = {10.1002/cepa.2534}, pages = {1787 -- 1792}, language = {en} } @misc{WangLiPasternaketal., author = {Wang, Jian and Li, Zheng and Pasternak, Hartmut and Euler, Mathias}, title = {Querkrafttragf{\"a}higkeit von Wellstegtr{\"a}gern mit versteiften quadratischen Steg{\"o}ffnungen}, series = {Bauingenieur}, volume = {98}, journal = {Bauingenieur}, number = {11}, issn = {0005-6650}, doi = {10.37544/0005-6650-2023-11-31}, pages = {343 -- 353}, abstract = {Die Ergebnisse aus drei Traglastversuchen und einer umfangreichen numerischen Parameterstudie (FE-Berechnungen) zum Tragverhalten von Wellstegtr{\"a}gern mit quadratischen Steg{\"o}ffnungen werden vorgestellt. Es werden versteifte Steg{\"o}ffnungen mit einem umlaufenden Versteifungskranz betrachtet. In der Parameterstudie werden die Einfl{\"u}sse der Steg{\"o}ffnungsgeometrie, der Tr{\"a}gergeometrie und der Position der Steg{\"o}ffnung auf die Querkrafttragf{\"a}higkeit der Wellstegtr{\"a}ger untersucht.}, language = {de} }