@inproceedings{StyervoyedovPaloumpaSchmeisser, author = {Styervoyedov, Andriy and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Composition and thermal stability of thin functional oxidic (Pr, La, Y) and metallic (Ru, Ti) layers on Si and SiC substrates}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {Thin Pr-, La- and Y- based oxide layers for applications as gate dielectric in metal-oxide-semiconductor (MOS) structures are investigated with x-ray photoelectron spectroscopy. The films with a thickness of around 2nm have been prepared on Si and SiC wafers by various chemical deposition methods based on nitrate solutions. In addition, we report on Ti- and Ru- based metal contacts prepared in the same way. The film composition is analysed and annealing steps in vacuum up to 900∘C have been applied to test their thermal stability. The interface characteristics, surface composition and thermal stability of MOS functional multilayers have been studied and will be presented.}, language = {en} } @inproceedings{HenkelPaloumpaMuelleretal., author = {Henkel, Karsten and Paloumpa, Ioanna and M{\"u}ller, Klaus and Schmeißer, Dieter}, title = {P(VDF/TrFE) as a ferroelectric dielectric for Organic Field effect Transistors in MFIS structure}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {MFIS structures consisting of metal, ferroelectric poly[vinylidene fluoride trifluoroethylene](P[VDF/TrFE]), insulator, semiconductor (Si) are fabricated and the influence of the polarization of the P(VDF/TrFE) on the CV characteristics of these structures is investigated. We find a characteristic ferroelectric hysteresis in the CV curves upon increasing the voltage scan window (e.g.-U...U,U=6...30V, |UP(VDF/TrFE)|≤15V, dP(VDF/TrFE)=300 nm). A writing process with adequate electric fields causes large shifts in the flatband voltage ( Δ UFB>4V for the quoted example before) which are stable over days. We report on our investigations which focus on the switching behavior by varying the parameters like polymer thickness, writing field strength and time, long time stability, reversing voltage and insulating material (SiO2, PMMA (Polymethylmetacrylate)). This material combination is favorable for transfer into our full organic concept of field effect transistors for application as a nondestructive readout memory (NDRO) cell.}, language = {en} } @inproceedings{MuellerPaloumpaHenkeletal., author = {M{\"u}ller, Klaus and Paloumpa, Ioanna and Henkel, Karsten and Schmeißer, Dieter}, title = {Organic Field Effect Transistors with polymer high-k dielectric insulator}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {Organic field effect transistors consisting of the copolymer poly(vinylidene fluoridetrifluoroethylene) (P(VDF-TrFE)) and P3HT (poly(3-hexlythiophene)) as active layer have been fabricated. The influence of P(VDF-TrFE) on the transconductance of organic field effect transistors was investigated and enhanced gate effects are observed compared to similar transistors with PMMA (Polymethylmetacrylate) as gate dielectric. Due to the high dielectric constant of P(VDF-TrFE) (DK=12) an operation voltage smaller than for a conventional organic dielectric like PMMA (DK=3.3) was observed. The thickness of the spincoated dielectric layers is in the range of 2microns and in consequence, no significant hysteresis was found, a prerequisite for transistor operation.}, language = {en} } @inproceedings{GeussMuellerPaloumpaetal., author = {Geuss, Markus and M{\"u}ller, Klaus and Paloumpa, Ioanna and Schmeißer, Dieter}, title = {Surface Potential profiling on operating full organic thin film transistors by Kelvin probe force microscopy}, series = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, booktitle = {Verhandlungen der Deutschen Physikalischen Gesellschaft}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, abstract = {Kelvin-AFM is employed to study all polymer organic thin film transistors which are promising candidates for low cost - low performance applications like active matrix displays, sensors or single-serving devices. We use bottom contact source-drain- electrode structures of different organic materials like carbon-black or graphite plotted on a printing foil. Semiconducting regioregular Poly(3-Hexylthiophene-2,5-diyl) (P3HT) was subsequently deposited by spin coating. Surface potential profiles across the transistor channel were measured by Kelvin-AFM for various source-drain potential differences and signs. We found that contact resistances cause characteristic steps in the surface potential near the channel edges which vary with the electrode material. Furthermore, nonlinearities appear in the potential gradient which possibly give evidence for lateral inhomogeneities of the carrier mobilities. In summary, surface potential imaging with high lateral resolution ( approx. 100 nm) is introduced as a powerful tool for the characterisation of the transistor performance and the selection of suitable low cost electrode materials.}, language = {en} }