@incollection{HirtBambachBlecketal., author = {Hirt, Gerhard and Bambach, Markus and Bleck, Wolfgang and Prahl, Ulrich and Stollenwerk, Jochen}, title = {The development of Incremental Sheet Forming from Flexible Forming to Fully Integrated Production of Sheet Metal Parts}, series = {Advances in Production Technology}, booktitle = {Advances in Production Technology}, editor = {Brecher, Christian}, publisher = {Springer-Verlag}, address = {Berlin ; Heidelberg}, isbn = {978-3-319-12303-5}, pages = {117 -- 129}, language = {en} } @inproceedings{ConradsDaamenHirtetal., author = {Conrads, Laura and Daamen, Markus and Hirt, Gerhard and Bambach, Markus}, title = {Improving the crash behavior of structural components made of advanced high strength steel by local heat treatment}, series = {IDDRG 2016 Challenges in Forming High-Strength Sheets, Linz, Austria, 12-15 June 2016}, booktitle = {IDDRG 2016 Challenges in Forming High-Strength Sheets, Linz, Austria, 12-15 June 2016}, address = {Linz}, isbn = {978-3-200-04630-6}, pages = {155 -- 161}, language = {en} } @misc{TellerBambachHirt, author = {Teller, Marco and Bambach, Markus and Hirt, Gerhard}, title = {A compression-torsion-wear-test achieving contact pressures of up to eight times the initial flow stress of soft aluminium}, series = {CIRP Annals - Manufacturing Technology}, volume = {64}, journal = {CIRP Annals - Manufacturing Technology}, number = {1}, issn = {0007-8506}, doi = {10.1016/j.cirp.2015.04.086}, pages = {289 -- 292}, language = {en} } @misc{RussigBambachHirt, author = {Russig, Christoph and Bambach, Markus and Hirt, Gerhard}, title = {A New Tool Concept for Rotary Peen Forming with Defined Impact Positions}, series = {Key Engineering Materials}, volume = {504-506}, journal = {Key Engineering Materials}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.504-506.925}, pages = {925 -- 930}, language = {en} } @inproceedings{HirtBambachSeurenetal., author = {Hirt, Gerhard and Bambach, Markus and Seuren, Simon and Henke, Thomas and Lohmar, Johannes}, title = {Recent developments in modeling of hot rolling processes: part I - Fundamentals}, series = {The 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013, Shenyang, China, 6-10 July 2013}, booktitle = {The 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013, Shenyang, China, 6-10 July 2013}, editor = {Shi-Hong Zhang, Xiang-Hua Liu and Ming Cheng, Juan Li}, publisher = {AIP Publishing}, address = {Melville, New York}, isbn = {978-0-7354-1156-2}, doi = {10.1063/1.4806828}, pages = {222 -- 230}, language = {en} } @inproceedings{HirtBambachSeurenetal., author = {Hirt, Gerhard and Bambach, Markus and Seuren, Simon and Henke, Thomas and Lohmar, Johannes}, title = {Recent Developments in modeling of hot rolling processes: part II - Applications}, series = {The 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013, Shenyang, China, 6 - 10 July 2013}, booktitle = {The 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013, Shenyang, China, 6 - 10 July 2013}, editor = {Shi-Hong Zhang, Xiang-Hua Liu and Ming Cheng, Juan Li}, publisher = {AIP Publishing}, address = {Melville, New York}, isbn = {978-0-7354-1156-2}, doi = {10.1063/1.4806829}, pages = {231 -- 238}, language = {en} } @incollection{HirtBleckBobzinetal., author = {Hirt, Gerhard and Bleck, Wolfgang and Bobzin, Kirsten and B{\"u}hrig-Polaczek, Andreas and Bambach, Markus and Brecher, Christian}, title = {Hybrid Production Systems}, series = {Integrative Production Technology for High-Wage Countries}, booktitle = {Integrative Production Technology for High-Wage Countries}, editor = {Brecher, Christian}, publisher = {Springer Verlag}, address = {Berlin ; Heidelberg}, isbn = {978-3-642-21066-2}, pages = {435 -- 696}, language = {en} } @incollection{BleckPrahlHirtetal., author = {Bleck, Wolfgang and Prahl, Ulrich and Hirt, Gerhard and Bambach, Markus}, title = {Designing New Forging Steels by ICMPE}, series = {Advances in Production Technology}, booktitle = {Advances in Production Technology}, editor = {Brecher, Christian}, publisher = {Springer Verlag}, address = {Berlin ; Heidelberg}, isbn = {978-3-319-12304-2}, doi = {10.1007/978-3-319-12304-2}, pages = {85 -- 98}, language = {en} } @incollection{HirtBambach, author = {Hirt, Gerhard and Bambach, Markus}, title = {Incremental Sheet Forming - ISF}, series = {Sheet Metal Forming: Processes and applications}, booktitle = {Sheet Metal Forming: Processes and applications}, editor = {Altan, Tailan and Tekkaya, A. Erman}, publisher = {ASM International}, address = {Materials Park, Ohio}, isbn = {978-1-61503-844-2}, pages = {273 -- 285}, language = {en} } @misc{BaillyBambachHirtetal., author = {Bailly, David and Bambach, Markus and Hirt, Gerhard and Pofahl, Thorsten and Herkrath, Ralf and Heyden, Hans and Trautz, Martin}, title = {Manufacturing of Innovative Self-supporting Sheet-metal Structures Representing Freeform Surfaces}, series = {Procedia CIRP}, volume = {18}, journal = {Procedia CIRP}, issn = {2212-8271}, doi = {10.1016/j.procir.2014.06.106}, pages = {51 -- 56}, language = {en} } @misc{DaamenGuevencBambachetal., author = {Daamen, Markus and G{\"u}ven{\c{c}}, Onur and Bambach, Markus and Hirt, Gerhard}, title = {Development of efficient production routes based on strip casting for advanced high strength steels for crash-relevant parts}, series = {CIRP Annals - Manufacturing Technology}, volume = {63}, journal = {CIRP Annals - Manufacturing Technology}, number = {1}, issn = {0007-8506}, doi = {10.1016/j.cirp.2014.03.025}, pages = {265 -- 268}, language = {en} } @misc{StillePoeplauBecketal., author = {Stille, Sebastian and P{\"o}plau, Julia and Beck, Tilmann and Bambach, Markus and Hirt, Gerhard and Singheiser, Lorenz}, title = {Very high cycle fatigue behavior of riblet structured Alclad 2024 thin sheets}, series = {International Journal of Fatigue}, volume = {63}, journal = {International Journal of Fatigue}, issn = {0142-1123}, doi = {10.1016/j.ijfatigue.2014.01.023}, pages = {183 -- 190}, language = {en} } @misc{BambachPietrygaMikloweitetal., author = {Bambach, Markus and Pietryga, Michael P. and Mikloweit, Alexander and Hirt, Gerhard}, title = {A finite element framework for the evolution of bond strength in joining-by-forming processes}, series = {Journal of Materials Processing Technology}, volume = {214}, journal = {Journal of Materials Processing Technology}, number = {10}, issn = {0924-0136}, doi = {10.1016/j.jmatprotec.2014.03.015}, pages = {2156 -- 2168}, language = {en} } @misc{LohmarBambachHirtetal., author = {Lohmar, Johannes and Bambach, Markus and Hirt, Gerhard and Kiefer, Thomas and Kotliba, Daniel}, title = {The Precise Prediction of Rolling Forces in Heavy Plate Rolling Based on Inverse Modeling Techniques}, series = {Steel Research International}, volume = {85}, journal = {Steel Research International}, number = {11}, issn = {1869-344X}, doi = {10.1002/srin.201300431}, pages = {1525 -- 1532}, language = {en} } @misc{GuevencBambachHirt, author = {G{\"u}ven{\c{c}}, Onur and Bambach, Markus and Hirt, Gerhard}, title = {Coupling of Crystal Plasticity Finite Element and Phase Field Methods for the Prediction of SRX Kinetics after Hot Working}, series = {Steel Research International}, volume = {85}, journal = {Steel Research International}, number = {6}, issn = {1869-344X}, doi = {10.1002/srin.201300191}, pages = {999 -- 1009}, language = {en} } @misc{VoswinckelBambachHirt, author = {Voswinckel, Holger and Bambach, Markus and Hirt, Gerhard}, title = {Improving geometrical accuracy for flanging by incremental sheet metal forming}, series = {International Journal of Material Forming}, volume = {8}, journal = {International Journal of Material Forming}, number = {3}, issn = {1960-6206}, doi = {10.1007/s12289-014-1182-y}, pages = {391 -- 399}, language = {en} } @misc{MertinNaumovMoseckeretal., author = {Mertin, Chris and Naumov, Andreas and Mosecker, Linda and Bambach, Markus and Hirt, Gerhard}, title = {Influence of the Process Temperature on the Properties of Friction Stir Welded Blanks Made of Mild Steel and Aluminum}, series = {Key Engineering Materials}, volume = {611-612}, journal = {Key Engineering Materials}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.611-612.1429}, pages = {1429 -- 1436}, language = {en} } @misc{HenkeHirtBambach, author = {Henke, Thomas and Hirt, Gerhard and Bambach, Markus}, title = {Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process}, series = {Materials Science Forum}, volume = {762}, journal = {Materials Science Forum}, issn = {1662-9752}, doi = {10.4028/www.scientific.net/MSF.762.354}, pages = {354 -- 359}, language = {en} } @misc{VoswinckelBambachHirt, author = {Voswinckel, Holger and Bambach, Markus and Hirt, Gerhard}, title = {Process Limits of Stretch and Shrink Flanging by Incremental Sheet Metal Forming}, series = {Key Engineering Materials}, volume = {549}, journal = {Key Engineering Materials}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.549.45}, pages = {45 -- 52}, language = {en} } @misc{RussigBambachHirt, author = {Russig, Christoph and Bambach, Markus and Hirt, Gerhard}, title = {Experimental Investigations of Different Tool Concepts for Rotary Peen Forming}, series = {Key Engineering Materials}, volume = {549}, journal = {Key Engineering Materials}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.549.53}, pages = {53 -- 60}, language = {en} }