@incollection{MichailovHantelmannKloshek, author = {Michailov, Vesselin and Hantelmann, Cord and Kloshek, Alexander}, title = {Impulsr{\"u}hrreibschweißen - ein Verfahren mit neuen M{\"o}glichkeiten}, series = {Große Schweißtechnische Tagung 2011}, booktitle = {Große Schweißtechnische Tagung 2011}, publisher = {DVS Media GmbH}, address = {D{\"u}sseldorf}, isbn = {978-3-87155-267-0}, pages = {171 -- 176}, language = {de} } @misc{ShapovalovHantelmannMichailovetal., author = {Shapovalov, Oleg and Hantelmann, Cord and Michailov, Vesselin and Kodgaspirov, G. E.}, title = {Influence of welding method on fatigue strength and destruction character of aluminum foam sandwiches}, series = {Deformatsiya i Razrushenie materialov}, journal = {Deformatsiya i Razrushenie materialov}, number = {5}, issn = {1814-4632}, abstract = {An influence of the arc welding and the laser welding on fatigue properties and destruction mechanisms of aluminum foam sandwich has been studied. It was found that specimens made by the arc welding had the best fatigue strength. Comparative results of four point bending fatigue tests of the non-welded specimens such as butt welded joints made by different welding methods are presented.}, language = {ru} } @misc{KondratyevMorozovaGolubevetal., author = {Kondratyev, Alex and Morozova, Iuliia and Golubev, Iurii and Hantelmann, Cord and Naumov, Alexander and Michailov, Vesselin}, title = {Микроструктура и механические свойства швов после различных режимов импульсной сварки Al - Mg - Si сплавов трением с перемешиванием}, series = {Metallovedenie i termicheskaya obrabotka metallov}, journal = {Metallovedenie i termicheskaya obrabotka metallov}, number = {11}, issn = {0026-0819}, pages = {25 -- 30}, abstract = {Welded joints of aluminum alloy 6082-T6 formed by the method of pulse friction stir welding are studied. The effect of the power and frequency of the pulses on the microstructure and mechanical properties of the welded joints is determined. Application of an additional pulse during the welding affects the surface quality and the shape of the weld, the distribution of the oxide layer and of particles of the hardening phase, and the grain size in the zone of dynamic recrystallization.}, language = {ru} } @misc{Kondrat’evMorozovaGolubevetal., author = {Kondrat'ev, Sergey and Morozova, Iuliia and Golubev, Iurii and Hantelmann, Cord and Naumov, Alexander and Michailov, Vesselin}, title = {Microstructure and Mechanical Properties of Welds of Al - Mg - Si Alloys After Different Modes of Impulse Friction Stir Welding}, series = {Metal Science and Heat Treatment}, volume = {59}, journal = {Metal Science and Heat Treatment}, number = {11-12}, issn = {0026-0673}, doi = {10.1007/s11041-018-0213-6}, pages = {697 -- 702}, abstract = {Welded joints of aluminum alloy 6082-T6 formed by the method of impulse friction stir welding are studied. The effect of the power and frequency of the pulses on the microstructure and mechanical properties of the welded joints is determined. Application of an additional pulse during the welding affects the surface quality and the shape of the weld, the distribution of the oxide layer and of particles of the hardening phase, and the grain size in the zone of dynamic recrystallization.}, language = {en} } @misc{MichailovFritzscheHantelmannetal., author = {Michailov, Vesselin and Fritzsche, Sebastian and Hantelmann, Cord and Ossenbrink, Ralf}, title = {Aluminium foam sandwiches for lightweight structures}, series = {Metal Science and Heat Treatment}, volume = {60}, journal = {Metal Science and Heat Treatment}, number = {1-2}, issn = {1573-8973}, doi = {10.1007/s11041-018-0238-x}, pages = {44 -- 49}, abstract = {The properties of sandwiches with aluminum foam and the special features of their use in lightweight welded structures are determined. The weldability of such sandwiches in foamed and non-foamed conditions is analyzed under friction stir welding, laser beam welding and short arc welding in protective gas. The process and mechanical properties of the welds are studied. The results are generalized in a catalog that may be useful for materials scientists and designers.}, language = {en} } @misc{HantelmannFritzscheMichailovetal., author = {Hantelmann, Cord and Fritzsche, Sebastian and Michailov, Vesselin and Boywitt, Ralf and Risse, Steffen and P{\"o}ge, Matthias and Vogelsang, J{\"o}rg and Cramer, Heidi}, title = {Geschweißte Konstruktionen aus Aluminiumschaumsandwich}, series = {Schweißen und Schneiden}, volume = {75}, journal = {Schweißen und Schneiden}, number = {12}, issn = {0036-7184}, pages = {912 -- 922}, abstract = {Im vorgestellten Projekt wurden werkstoff- und konstuktionsgerechte Knotenformen aus Aluminiumschaumsandwich (engl. Aluminium Foam Sandwich, AFS) gestaltet und mit unterschiedlichen Schweißverfahren wie dem Metall-Inertgasschweißen und dem R{\"u}hrreibschweißen gef{\"u}gt und gepr{\"u}ft. Im Rahmen der Arbeiten stand dabei die schweißtechnische Verarbeitung von AFS mit anderen Produkten, wie den Strangpressprofilen oder dem Aluminiumvollmaterial, und deren Beanspruchbarkeit im Vordergrund. In umfangreichen Untersuchungen wurden hierzu sowohl die Verbindugsknoten selbst als auch der Sandwichverbund und die Einzelkomponenten des Sandwich, Schaum und Decklagen, anhand der statischen Festigkeit und Schwingfestigkeit bewertet. Zus{\"a}tzlich wurden innere Sch{\"a}digungsmechanismen betrachtet. Mit experimentellen und numerischen Nachweismethoden konnte die anwendungssichere Knotengestaltung, -anbindung und -berechnung der unterschiedlichen Verbindungstypen umgesetzt werden. Die Ergebnisse wurden im Rahmen der Nachweisf{\"u}hrung gegen{\"u}bergestellt und hinsichtlich eines praxisgerechten Einsatzes nach FKM-Richtlinie bzw. Eurocode9 bewertet. Mit den ermittelten Ergebnissen wurde die bisherige Gestaltungs- und F{\"u}gerichtlinie um neue Verbindungstypen erweitert.}, language = {de} } @misc{HantelmannFritzscheMichailovetal., author = {Hantelmann, Cord and Fritzsche, Sebastian and Michailov, Vesselin and Boywitt, Ralf and Risse, Steffen and Paulinus, Dietmar}, title = {Einsatz von Aluminiumschaum-Sandwich-Bauteilen in Schweißkonstruktionen}, series = {Schweissen und Scheiden}, volume = {68}, journal = {Schweissen und Scheiden}, number = {3}, issn = {0036-7184}, pages = {106 -- 114}, language = {de} } @inproceedings{GolubevMorozovaNaumovetal., author = {Golubev, Iurii and Morozova, Iuliia and Naumov, Anton and Hantelmann, Cord and Doynov, Nikolay and Michailov, Vesselin}, title = {Numerical simulation and experimental investigation on Numerical simulation of 6082-T6 aluminum alloy}, series = {Materials Science and Technology 2017, (MS\&T17), Pittsburgh, Pennsylvania, USA, October 8-12, 2017, volume 2}, booktitle = {Materials Science and Technology 2017, (MS\&T17), Pittsburgh, Pennsylvania, USA, October 8-12, 2017, volume 2}, publisher = {Curran Associates, Inc.}, address = {Red Hook, NY}, isbn = {978-1-5108-5058-3}, pages = {987 -- 994}, abstract = {The series of impulse friction stir welding (IFSW) experiments for aluminum alloy 6082-T6 butt joints was performed to obtain micrographs, tensile and hardness test samples and to receive the validation data for a numerical model of the process. Impulse force and frequency were varied to determine the effect of individual process parameters on microstructure evolution and mechanical properties of the welded butt joints. A three-dimensional model was established to simulate temperature distribution, heat generation and contact state between the tool and the workpiece during IFSW. Based on the numerical simulation, the influence of the impulses on heat input, maximum weld temperatures and contact state was found. The combination of impulse force and frequency effected the grain refinement. The influence of impulses on the elongation and hardness of the welded joints during IFSW were determined.}, language = {en} } @misc{HantelmannFritzscheMichailovetal., author = {Hantelmann, Cord and Fritzsche, Sebastian and Michailov, Vesselin and Boywitt, Ralf}, title = {Entwicklung geschweißter Konstruktionen aus Aluminiumsandwich}, series = {DVS Congress 2022, Große Schweißtechnische Tagung, DVS Campus ; Kurzfassungen der Vortr{\"a}ge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 ; (Langfassungen der Beitr{\"a}ge auf USB-Karte)}, journal = {DVS Congress 2022, Große Schweißtechnische Tagung, DVS Campus ; Kurzfassungen der Vortr{\"a}ge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 ; (Langfassungen der Beitr{\"a}ge auf USB-Karte)}, publisher = {DVS Media GmbH}, address = {D{\"u}sseldorf}, isbn = {978-3-96144-189-1}, pages = {245 -- 251}, abstract = {Im vorgestellten Projekt wurden werkstoff- und konstruktionsgerechte Knotenformen aus Aluminiumschaumsandwich gestaltet und mit unterschiedlichen Schweißverfahren, wie dem Metall-Inertgas-Schweißen und dem R{\"u}hrreibschweißen, gef{\"u}gt und gepr{\"u}ft. In umfangreichen Untersuchungen wurden die Knoten, der Sandwichverbund und die Einzelkomponenten des Sandwich, Schaum und Decklagen, anhand der statischen Festigkeit und Schwingfestigkeit bewertet. Zus{\"a}tzlich wurden innere Sch{\"a}digungsmechanismen betrachtet. Mit experimentellen und numerischen Nachweismethoden konnte die anwendungssichere Knotengestaltung, -anbindung und -berechnung der unterschiedlichen Verbindungstypen umgesetzt werden. Die Ergebnisse wurden im Rahmen der Nachweisf{\"u}hrung gegen{\"u}bergestellt und hinsichtlich eines praxisgerechten Einsatzes nach FKM-Richtlinie bzw. Eurocode9 bewertet. Mit den ermittelten Ergebnissen wurde die bisherige Gestaltungs- und F{\"u}gerichtlinie um neue Verbindungstypen erweitert.}, language = {de} } @inproceedings{HantelmannFritzscheMichailovetal., author = {Hantelmann, Cord and Fritzsche, Sebastian and Michailov, Vesselin and Paulinus, Dietmar}, title = {Einsatz von Aluminiumschaumsandwich in Schweißkonstruktionen}, series = {DVS Congress 2014, Große Schweißtechnische Tagung, DVS-Studentenkongress, Vortr{\"a}ge der Veranstaltungen in Berlin am 15. und 16. September 2014}, booktitle = {DVS Congress 2014, Große Schweißtechnische Tagung, DVS-Studentenkongress, Vortr{\"a}ge der Veranstaltungen in Berlin am 15. und 16. September 2014}, publisher = {DVS Media GmbH}, address = {D{\"u}sseldorf}, isbn = {978-3-945023-03-7}, language = {de} } @incollection{HantelmannFritzscheMichailovetal., author = {Hantelmann, Cord and Fritzsche, Sebastian and Michailov, Vesselin and Boywitt, Ralf}, title = {Einsatz von Aluminiumschaumsandwich in Schweißkonstruktionen}, series = {DVS Congress 2017 : Große Schweißtechnische Tagung : DVS-Studentenkongress : Vortr{\"a}ge der Veranstaltungen in D{\"u}sseldorf vom 26. bis 29. September 2017}, booktitle = {DVS Congress 2017 : Große Schweißtechnische Tagung : DVS-Studentenkongress : Vortr{\"a}ge der Veranstaltungen in D{\"u}sseldorf vom 26. bis 29. September 2017}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, isbn = {978-3-96144-008-5}, pages = {173}, abstract = {In der vorgestellten Arbeit wird die Anwendbarkeit von Aluminiumschaumsandich in Schweißkonstruktionen vorgestellt. Systematische Betrachtungen zur Schweißbarkeit mittels Laserstrahlschweißen, MSG - Kurzlichtbogen und R{\"u}hrreibschweißen sowohl im gesch{\"a}umten als auch im ungesch{\"a}umten Zustand werden beschrieben. Dazu wurden verschiedene Knotenformen wie I-Stoß- bzw. T-Stoßverbindungen hergestellt und deren mechanischtechnologische Eigenschaften ermittelt. Neben der quasistatischen Pr{\"u}fung, wurde jede Ausf{\"u}hrungsform des Knotens auf deren Schwingfestigkeit hin gepr{\"u}ft und die Anwendbarkeit bestehender Regelwerke wie die FKMRichtlinie oder der Eurocode 9 f{\"u}r die Nachweisf{\"u}hrung betrachtet. Die Ergebnisse sind abschließend in einem Gestaltungskatalog als Hilfsmittel f{\"u}r den Konstrukteur zusammengefasst. Parallel dazu wurden die experimentellen Untersuchungen mittels FEM begleitet. Es wird die FE-Modellentwicklung f{\"u}r die Berechnung des Sandwichverbundes an sich als auch von F{\"u}geknoten dargestellt wie auch die Modellvalidierung mit einem Musterbauteil aus einer Hubarbeitsb{\"u}hne.}, language = {de} } @incollection{GolubevDoynovHantelmannetal., author = {Golubev, Iurii and Doynov, Nikolay and Hantelmann, Cord and Michailov, Vesselin}, title = {W{\"a}rmequellemodell und FE-Temperaturfeldsimulation f{\"u}r das R{\"u}hrreibschweißen}, series = {DVS Congress 2017 : Große Schweißtechnische Tagung : DVS-Studentenkongress : Vortr{\"a}ge der Veranstaltungen in D{\"u}sseldorf vom 26. bis 29. September 2017}, booktitle = {DVS Congress 2017 : Große Schweißtechnische Tagung : DVS-Studentenkongress : Vortr{\"a}ge der Veranstaltungen in D{\"u}sseldorf vom 26. bis 29. September 2017}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, isbn = {978-3-96144-008-5}, pages = {112}, language = {de} } @misc{ShapovalovKodzhaspirovHantelmannetal., author = {Shapovalov, Oleg and Kodzhaspirov, Georgii and Hantelmann, Cord and Michailov, Vesselin}, title = {Effect of a Welding Method on the Fatigue Strength and Fracture of Foam-Aluminum Sandwiches}, series = {Russian Metallurgy (Metally)}, volume = {Vol. 2019}, journal = {Russian Metallurgy (Metally)}, number = {10}, issn = {0036-0295}, doi = {10.1134/S0036029519100239}, pages = {1063 -- 1066}, abstract = {The influence of argon-arc welding and laser welding on the fatigue properties and the fracture of a foam-aluminum sandwich is studied. Argon-arc-welded samples are found to have the highest fatigue strength.}, language = {en} } @misc{GolubevMorozovaNaumovetal., author = {Golubev, Iurii and Morozova, Iuliia and Naumov, Anton and Hantelmann, Cord and Doynov, Nikolay and Michailov, Vesselin}, title = {Numerical Simulation and Experimental Investigation on Impulse Friction Stir Welding of 6082-T6 Aluminum Alloy}, series = {Papers from Materials Science and Technology 2017 (MS\&T17), October 8 - 12, 2017, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania USA}, journal = {Papers from Materials Science and Technology 2017 (MS\&T17), October 8 - 12, 2017, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania USA}, doi = {10.7449/2017/mst_2017_987_994}, pages = {987 -- 994}, abstract = {The series of impulse friction stir welding (IFSW) experiments for aluminum alloy 6082-T6 butt joints was performed to obtain micrographs, tensile and hardness test samples and to receive the validation data for a numerical model of the process. Impulse force and frequency were varied to determine the effect of individual process parameters on microstructure evolution and mechanical properties of the welded butt joints. A three-dimensional model was established to simulate temperature distribution, heat generation and contact state between the tool and the workpiece during IFSW. Based on the numerical simulation, the influence of the impulses on heat input, maximum weld temperatures and contact state was found. The combination of impulse force and frequency effected the grain refinement. The influence of impulses on the elongation and hardness of the welded joints during IFSW were determined.}, language = {en} } @misc{HantelmannFritzscheMichailovetal., author = {Hantelmann, Cord and Fritzsche, Sebastian and Michailov, Vesselin and Boywitt, Ralf and Risse, Steffen and Paulinus, Dietmar}, title = {Utilisation of aluminium foam sandwich components in welded structures}, series = {Welding and Cutting}, journal = {Welding and Cutting}, number = {5}, issn = {1612-3433}, pages = {317 -- 325}, language = {en} }