@misc{LechowskiKutukovaGrenzeretal., author = {Lechowski, Bartlomiej and Kutukova, Kristina and Grenzer, Joerg and Panchenko, Iuliana and Krueger, Peter and Clausner, Andre and Zschech, Ehrenfried}, title = {Laboratory X-ray Microscopy of 3D Nanostructures in the Hard X-ray Regime Enabled by a Combination of Multilayer X-ray Optics}, series = {Nanomaterials}, volume = {14}, journal = {Nanomaterials}, number = {2}, issn = {2079-4991}, doi = {10.3390/nano14020233}, abstract = {High-resolution imaging of buried metal interconnect structures in advanced microelectronic products with full-field X-ray microscopy is demonstrated in the hard X-ray regime, i.e., at photon energies > 10 keV. The combination of two multilayer optics—a side-by-side Montel (or nested Kirkpatrick-Baez) condenser optic and a high aspect-ratio multilayer Laue lens—results in an asymmetric optical path in the transmission X-ray microscope. This optics arrangement allows the imaging of 3D nanostructures in opaque objects at a photon energy of 24.2 keV (In-Kα X-ray line). Using a Siemens star test pattern with a minimal feature size of 150 nm, it was proven that features < 150 nm can be resolved. In-Kα radiation is generated from a Ga-In alloy target using a laboratory X-ray source that employs the liquid-metal-jet technology. Since the penetration depth of X-rays into the samples is significantly larger compared to 8 keV photons used in state-of-the-art laboratory X-ray microscopes (Cu-Kα radiation), 3D-nanopattered materials and structures can be imaged nondestructively in mm to cm thick samples. This means that destructive de-processing, thinning or cross-sectioning of the samples are not needed for the visualization of interconnect structures in microelectronic products manufactured using advanced packaging technologies. The application of laboratory transmission X-ray microscopy in the hard X-ray regime is demonstrated for Cu/Cu6Sn5/Cu microbump interconnects fabricated using solid-liquid interdiffusion (SLID) bonding.}, language = {en} } @misc{KutukovaLechowskiGrenzeretal., author = {Kutukova, Kristina and Lechowski, Bartlomiej and Grenzer, Joerg and Krueger, Peter and Clausner, Andr{\´e} and Zschech, Ehrenfried}, title = {Laboratory High-Contrast X-ray Microscopy of Copper Nanostructures Enabled by a Liquid-Metal-Jet X-ray Source}, series = {Nanomaterials}, volume = {14}, journal = {Nanomaterials}, number = {5}, issn = {2079-4991}, doi = {10.3390/nano14050448}, abstract = {High-resolution imaging of Cu/low-k on-chip interconnect stacks in advanced micro-electronic products is demonstrated using full-field transmission X-ray microscopy (TXM). The comparison of two lens-based laboratory X-ray microscopes that are operated at two different photon energies, 8.0 keV and 9.2 keV, shows a contrast enhancement for imaging of copper nanostructures embedded in insulating organosilicate glass of a factor of 5 if 9.2 keV photons are used. Photons with this energy (Ga-Kα radiation) are generated from a Ga-containing target of a laboratory X-ray source applying the liquid-metal-jet technology. The 5 times higher contrast compared to the use of Cu-Kα radiation (8.0 keV photon energy) from a rotating anode X-ray source is caused by the fact that the energy of the Ga-Kα emission line is slightly higher than that of the Cu-K absorption edge (9.0 keV photon energy). The use of Ga-Kα radiation is of particular advantage for imaging of copper interconnects with dimensions from several 100 nm down to several 10 nm in a Cu/SiO2 or Cu/low-k backend-of-line stack. Physical failure analysis and reliability engineering in the semiconductor industry will benefit from high-contrast X-ray images of sub-µm copper structures in microchips.}, language = {en} }