@incollection{HirtBambachBlecketal., author = {Hirt, Gerhard and Bambach, Markus and Bleck, Wolfgang and Prahl, Ulrich and Stollenwerk, Jochen}, title = {The development of Incremental Sheet Forming from Flexible Forming to Fully Integrated Production of Sheet Metal Parts}, series = {Advances in Production Technology}, booktitle = {Advances in Production Technology}, editor = {Brecher, Christian}, publisher = {Springer-Verlag}, address = {Berlin ; Heidelberg}, isbn = {978-3-319-12303-5}, pages = {117 -- 129}, language = {en} } @inproceedings{ConradsDaamenHirtetal., author = {Conrads, Laura and Daamen, Markus and Hirt, Gerhard and Bambach, Markus}, title = {Improving the crash behavior of structural components made of advanced high strength steel by local heat treatment}, series = {IDDRG 2016 Challenges in Forming High-Strength Sheets, Linz, Austria, 12-15 June 2016}, booktitle = {IDDRG 2016 Challenges in Forming High-Strength Sheets, Linz, Austria, 12-15 June 2016}, address = {Linz}, isbn = {978-3-200-04630-6}, pages = {155 -- 161}, language = {en} } @misc{TellerBambachHirt, author = {Teller, Marco and Bambach, Markus and Hirt, Gerhard}, title = {A compression-torsion-wear-test achieving contact pressures of up to eight times the initial flow stress of soft aluminium}, series = {CIRP Annals - Manufacturing Technology}, volume = {64}, journal = {CIRP Annals - Manufacturing Technology}, number = {1}, issn = {0007-8506}, doi = {10.1016/j.cirp.2015.04.086}, pages = {289 -- 292}, language = {en} } @misc{RussigBambachHirt, author = {Russig, Christoph and Bambach, Markus and Hirt, Gerhard}, title = {A New Tool Concept for Rotary Peen Forming with Defined Impact Positions}, series = {Key Engineering Materials}, volume = {504-506}, journal = {Key Engineering Materials}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.504-506.925}, pages = {925 -- 930}, language = {en} } @inproceedings{HirtBambachSeurenetal., author = {Hirt, Gerhard and Bambach, Markus and Seuren, Simon and Henke, Thomas and Lohmar, Johannes}, title = {Recent developments in modeling of hot rolling processes: part I - Fundamentals}, series = {The 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013, Shenyang, China, 6-10 July 2013}, booktitle = {The 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013, Shenyang, China, 6-10 July 2013}, editor = {Shi-Hong Zhang, Xiang-Hua Liu and Ming Cheng, Juan Li}, publisher = {AIP Publishing}, address = {Melville, New York}, isbn = {978-0-7354-1156-2}, doi = {10.1063/1.4806828}, pages = {222 -- 230}, language = {en} } @inproceedings{HirtBambachSeurenetal., author = {Hirt, Gerhard and Bambach, Markus and Seuren, Simon and Henke, Thomas and Lohmar, Johannes}, title = {Recent Developments in modeling of hot rolling processes: part II - Applications}, series = {The 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013, Shenyang, China, 6 - 10 July 2013}, booktitle = {The 11th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2013, Shenyang, China, 6 - 10 July 2013}, editor = {Shi-Hong Zhang, Xiang-Hua Liu and Ming Cheng, Juan Li}, publisher = {AIP Publishing}, address = {Melville, New York}, isbn = {978-0-7354-1156-2}, doi = {10.1063/1.4806829}, pages = {231 -- 238}, language = {en} } @incollection{HirtBleckBobzinetal., author = {Hirt, Gerhard and Bleck, Wolfgang and Bobzin, Kirsten and B{\"u}hrig-Polaczek, Andreas and Bambach, Markus and Brecher, Christian}, title = {Hybrid Production Systems}, series = {Integrative Production Technology for High-Wage Countries}, booktitle = {Integrative Production Technology for High-Wage Countries}, editor = {Brecher, Christian}, publisher = {Springer Verlag}, address = {Berlin ; Heidelberg}, isbn = {978-3-642-21066-2}, pages = {435 -- 696}, language = {en} } @incollection{BleckPrahlHirtetal., author = {Bleck, Wolfgang and Prahl, Ulrich and Hirt, Gerhard and Bambach, Markus}, title = {Designing New Forging Steels by ICMPE}, series = {Advances in Production Technology}, booktitle = {Advances in Production Technology}, editor = {Brecher, Christian}, publisher = {Springer Verlag}, address = {Berlin ; Heidelberg}, isbn = {978-3-319-12304-2}, doi = {10.1007/978-3-319-12304-2}, pages = {85 -- 98}, language = {en} } @incollection{HirtBambach, author = {Hirt, Gerhard and Bambach, Markus}, title = {Incremental Sheet Forming - ISF}, series = {Sheet Metal Forming: Processes and applications}, booktitle = {Sheet Metal Forming: Processes and applications}, editor = {Altan, Tailan and Tekkaya, A. Erman}, publisher = {ASM International}, address = {Materials Park, Ohio}, isbn = {978-1-61503-844-2}, pages = {273 -- 285}, language = {en} } @misc{BaillyBambachHirtetal., author = {Bailly, David and Bambach, Markus and Hirt, Gerhard and Pofahl, Thorsten and Herkrath, Ralf and Heyden, Hans and Trautz, Martin}, title = {Manufacturing of Innovative Self-supporting Sheet-metal Structures Representing Freeform Surfaces}, series = {Procedia CIRP}, volume = {18}, journal = {Procedia CIRP}, issn = {2212-8271}, doi = {10.1016/j.procir.2014.06.106}, pages = {51 -- 56}, language = {en} } @misc{DaamenGuevencBambachetal., author = {Daamen, Markus and G{\"u}ven{\c{c}}, Onur and Bambach, Markus and Hirt, Gerhard}, title = {Development of efficient production routes based on strip casting for advanced high strength steels for crash-relevant parts}, series = {CIRP Annals - Manufacturing Technology}, volume = {63}, journal = {CIRP Annals - Manufacturing Technology}, number = {1}, issn = {0007-8506}, doi = {10.1016/j.cirp.2014.03.025}, pages = {265 -- 268}, language = {en} } @misc{StillePoeplauBecketal., author = {Stille, Sebastian and P{\"o}plau, Julia and Beck, Tilmann and Bambach, Markus and Hirt, Gerhard and Singheiser, Lorenz}, title = {Very high cycle fatigue behavior of riblet structured Alclad 2024 thin sheets}, series = {International Journal of Fatigue}, volume = {63}, journal = {International Journal of Fatigue}, issn = {0142-1123}, doi = {10.1016/j.ijfatigue.2014.01.023}, pages = {183 -- 190}, language = {en} } @misc{BambachPietrygaMikloweitetal., author = {Bambach, Markus and Pietryga, Michael P. and Mikloweit, Alexander and Hirt, Gerhard}, title = {A finite element framework for the evolution of bond strength in joining-by-forming processes}, series = {Journal of Materials Processing Technology}, volume = {214}, journal = {Journal of Materials Processing Technology}, number = {10}, issn = {0924-0136}, doi = {10.1016/j.jmatprotec.2014.03.015}, pages = {2156 -- 2168}, language = {en} } @misc{LohmarBambachHirtetal., author = {Lohmar, Johannes and Bambach, Markus and Hirt, Gerhard and Kiefer, Thomas and Kotliba, Daniel}, title = {The Precise Prediction of Rolling Forces in Heavy Plate Rolling Based on Inverse Modeling Techniques}, series = {Steel Research International}, volume = {85}, journal = {Steel Research International}, number = {11}, issn = {1869-344X}, doi = {10.1002/srin.201300431}, pages = {1525 -- 1532}, language = {en} } @misc{GuevencBambachHirt, author = {G{\"u}ven{\c{c}}, Onur and Bambach, Markus and Hirt, Gerhard}, title = {Coupling of Crystal Plasticity Finite Element and Phase Field Methods for the Prediction of SRX Kinetics after Hot Working}, series = {Steel Research International}, volume = {85}, journal = {Steel Research International}, number = {6}, issn = {1869-344X}, doi = {10.1002/srin.201300191}, pages = {999 -- 1009}, language = {en} } @misc{VoswinckelBambachHirt, author = {Voswinckel, Holger and Bambach, Markus and Hirt, Gerhard}, title = {Improving geometrical accuracy for flanging by incremental sheet metal forming}, series = {International Journal of Material Forming}, volume = {8}, journal = {International Journal of Material Forming}, number = {3}, issn = {1960-6206}, doi = {10.1007/s12289-014-1182-y}, pages = {391 -- 399}, language = {en} } @misc{MertinNaumovMoseckeretal., author = {Mertin, Chris and Naumov, Andreas and Mosecker, Linda and Bambach, Markus and Hirt, Gerhard}, title = {Influence of the Process Temperature on the Properties of Friction Stir Welded Blanks Made of Mild Steel and Aluminum}, series = {Key Engineering Materials}, volume = {611-612}, journal = {Key Engineering Materials}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.611-612.1429}, pages = {1429 -- 1436}, language = {en} } @misc{HenkeHirtBambach, author = {Henke, Thomas and Hirt, Gerhard and Bambach, Markus}, title = {Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process}, series = {Materials Science Forum}, volume = {762}, journal = {Materials Science Forum}, issn = {1662-9752}, doi = {10.4028/www.scientific.net/MSF.762.354}, pages = {354 -- 359}, language = {en} } @misc{VoswinckelBambachHirt, author = {Voswinckel, Holger and Bambach, Markus and Hirt, Gerhard}, title = {Process Limits of Stretch and Shrink Flanging by Incremental Sheet Metal Forming}, series = {Key Engineering Materials}, volume = {549}, journal = {Key Engineering Materials}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.549.45}, pages = {45 -- 52}, language = {en} } @misc{RussigBambachHirt, author = {Russig, Christoph and Bambach, Markus and Hirt, Gerhard}, title = {Experimental Investigations of Different Tool Concepts for Rotary Peen Forming}, series = {Key Engineering Materials}, volume = {549}, journal = {Key Engineering Materials}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.549.53}, pages = {53 -- 60}, language = {en} } @misc{MoseckerGoettmannSaeedAkbarietal., author = {Mosecker, Linda and G{\"o}ttmann, Alexander and Saeed-Akbari, Alireza and Bleck, Wolfgang and Bambach, Markus and Hirt, Gerhard}, title = {Deformation Mechanisms of Ti6Al4V Sheet Material during the Incremental Sheet Forming with Laser Heating}, series = {Key Engineering Materials}, volume = {549}, journal = {Key Engineering Materials}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.549.372}, pages = {372 -- 380}, language = {en} } @misc{HenkeBambachHirt, author = {Henke, Thomas and Bambach, Markus and Hirt, Gerhard}, title = {Die and process design for hot forging of a gear wheel - a case study}, series = {Key Engineering Materials}, volume = {554-557}, journal = {Key Engineering Materials}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.554-557.307}, pages = {307 -- 316}, language = {en} } @misc{GuevencHenkeLaschetetal., author = {G{\"u}ven{\c{c}}, Onur and Henke, Thomas and Laschet, Gottfried and B{\"o}ttger, Bernd and Apel, Markus and Bambach, Markus and Hirt, Gerhard}, title = {Modeling of Static Recrystallization Kinetics by Coupling Crystal Plasticity FEM and Multiphase Field Calculations}, series = {Computer Methods in Material Science}, volume = {13}, journal = {Computer Methods in Material Science}, number = {2}, issn = {1641-8581}, pages = {368 -- 374}, language = {en} } @misc{GoettmannBaillyBergweileretal., author = {G{\"o}ttmann, Alexander and Bailly, David and Bergweiler, Georg and Bambach, Markus and Stollenwerk, Jochen and Hirt, Gerhard and Loosen, P.}, title = {A novel approach for temperature control in ISF supported by laser and resistance heating}, series = {The International Journal of Advanced Manufacturing Technology}, volume = {67}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {9}, issn = {0268-3768}, doi = {10.1007/s00170-012-4640-z}, pages = {2195 -- 2205}, language = {en} } @misc{HenkeHirtBambach, author = {Henke, Thomas and Hirt, Gerhard and Bambach, Markus}, title = {Optimization of a Closed Die Forging Process to Manufacture a Gear Wheel by the Use of a Response Surface Model}, series = {Advanced Materials Research}, volume = {922}, journal = {Advanced Materials Research}, issn = {1662-8985}, doi = {10.4028/www.scientific.net/AMR.922.254}, pages = {254 -- 259}, language = {en} } @misc{BambachPietrygaMikloweitetal., author = {Bambach, Markus and Pietryga, Michael P. and Mikloweit, Alexander and Hirt, Gerhard and Karhausen, Kai-Friedrich}, title = {Finite Element Implementation of a Bonding Model and Application to Roll Bonding of Aluminum Sheets of Largely Different Yield Strength}, series = {Materials Science Forum}, volume = {783-786}, journal = {Materials Science Forum}, issn = {1662-9752}, doi = {10.4028/www.scientific.net/MSF.783-786.644}, pages = {644 -- 650}, language = {en} } @misc{RussigBambachHirtetal., author = {Russig, Christoph and Bambach, Markus and Hirt, Gerhard and Holtmann, N.}, title = {Shot peen forming of fiber metal laminates on the example of GLARE®}, series = {International Journal of Material Forming}, volume = {7}, journal = {International Journal of Material Forming}, number = {4}, issn = {1960-6206}, doi = {10.1007/s12289-013-1137-8}, pages = {425 -- 438}, language = {en} } @misc{HenkeBambachHirt, author = {Henke, Thomas and Bambach, Markus and Hirt, Gerhard}, title = {Quantification of uncertainties in grain size predictions of a microstructure-based flow stress model and application to gear wheel forging}, series = {CIRP Annals - Manufacturing Technology}, volume = {62}, journal = {CIRP Annals - Manufacturing Technology}, number = {1}, issn = {0007-8506}, doi = {10.1016/j.cirp.2013.03.121}, pages = {287 -- 290}, language = {en} } @inproceedings{SeurenWillkommBueckeretal., author = {Seuren, Simon and Willkomm, Johannes and B{\"u}cker, Hans and Bambach, Markus and Hirt, Gerhard}, title = {Sensitivity Analysis of a Force and Microstructure Model for Plate Rolling}, series = {Metal Forming 2012, proceedings of the 14th International Conference on Metal forming, September 16 - 19, 2012, Krakow, Poland}, booktitle = {Metal Forming 2012, proceedings of the 14th International Conference on Metal forming, September 16 - 19, 2012, Krakow, Poland}, publisher = {Wiley-VCH}, address = {Weinheim}, isbn = {978-3-514-00797-0}, pages = {91 -- 94}, language = {en} } @inproceedings{BambachSeurenHenkeetal., author = {Bambach, Markus and Seuren, Simon and Henke, Thomas and Heppner, Stephan and Xiong, Wei and Hirt, Gerhard}, title = {Konzepte zur integrierten Modellierung von Gef{\"u}ge- und Fließspannungsentwicklung in der Simulation von Warmumformprozessen}, series = {Tagungsband, 13. RoundTable Simulation in der Umformtechnik, 23. bis 26. April 2012, Bamberg}, booktitle = {Tagungsband, 13. RoundTable Simulation in der Umformtechnik, 23. bis 26. April 2012, Bamberg}, publisher = {Simufact Engineering GmbH}, address = {Hamburg}, isbn = {978-3-9813814-1-2}, pages = {117 -- 139}, language = {de} } @inproceedings{GoettmannKorinthSchaeferetal., author = {G{\"o}ttmann, Alexander and Korinth, Marcus Christopher and Sch{\"a}fer, V. and Taleb-Araghi, Babak and Bambach, Markus and Hirt, Gerhard}, title = {Manufacturing of Individualized Cranial Implants Using Two Point Incremental Sheet Metal Forming}, series = {Future Trends in Production Engineering, Proceedings of the First Conference of the German Academic Society for Production Engineering (WGP), Berlin, Germany, 8th-9th June 2011}, booktitle = {Future Trends in Production Engineering, Proceedings of the First Conference of the German Academic Society for Production Engineering (WGP), Berlin, Germany, 8th-9th June 2011}, editor = {Schuh, G{\"u}nther and Neugebauer, Reimund and Uhlmann, Eckart}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-642-24490-2}, doi = {10.1007/978-3-642-24491-9_28}, pages = {287 -- 295}, language = {en} } @inproceedings{HirtBambachSeurenetal., author = {Hirt, Gerhard and Bambach, Markus and Seuren, Simon and Henke, Thomas}, title = {Current aspects of modelling in hot rolling}, series = {Conference papers, 4th International Conference on Thermomechanical Processing of Steels : 10 - 12 September 2012, Sheffield, UK}, booktitle = {Conference papers, 4th International Conference on Thermomechanical Processing of Steels : 10 - 12 September 2012, Sheffield, UK}, publisher = {IOM Communications}, address = {London}, pages = {36 -- 38}, language = {en} } @inproceedings{SeurenRomansReckeretal., author = {Seuren, Simon and Romans, T. and Recker, D. and Rosenstock, D. and Bambach, Markus and Hirt, Gerhard}, title = {Void closure in heavy ingots - a comparison of rolling and open die forging}, series = {Proceedings, ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging, 3 - 7 June 2012, Aachen, Germany, Eurogress}, booktitle = {Proceedings, ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging, 3 - 7 June 2012, Aachen, Germany, Eurogress}, address = {Aachen}, pages = {1 -- 5}, language = {en} } @misc{LaugwitzVoswinckelHirtetal., author = {Laugwitz, Marvin and Voswinckel, Holger and Hirt, Gerhard and Bambach, Markus}, title = {Development of tooling concepts to increase geometrical accuracy in high speed incremental hole flanging}, series = {International Journal of Material Forming}, volume = {11}, journal = {International Journal of Material Forming}, number = {4}, issn = {1960-6206}, doi = {10.1007/s12289-017-1356-5}, pages = {471 -- 477}, language = {en} } @misc{BambachVoswinckelHirt, author = {Bambach, Markus and Voswinckel, Holger and Hirt, Gerhard}, title = {A New Process Design for Performing Hole-flanging Operations by Incremental Sheet Forming}, series = {Procedia Engineering}, volume = {81}, journal = {Procedia Engineering}, issn = {1877-7058}, doi = {10.1016/j.proeng.2014.10.325}, pages = {2305 -- 2310}, language = {en} } @misc{LohmarBambachHirt, author = {Lohmar, Johannes and Bambach, Markus and Hirt, Gerhard}, title = {Comparison of Semi-empirical and Dislocation Density based Material Equations for Fast Modeling of Multistage Hot Working of Steel}, series = {Procedia Engineering}, volume = {81}, journal = {Procedia Engineering}, issn = {1877-7058}, doi = {10.1016/j.proeng.2014.09.162}, pages = {268 -- 273}, language = {en} } @misc{ImranAfzalBuhletal., author = {Imran, Muhammad and Afzal, Muhammad Junaid and Buhl, Johannes and Bambach, Markus and Dunlap, Anthony and Schwedt, Alexander and Aretz, Anke and Wang, Shuhan and Lohmar, Johannes and Hirt, Gerhard}, title = {Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling}, series = {Production Engineering}, volume = {14}, journal = {Production Engineering}, number = {1}, issn = {1863-7353}, doi = {10.1007/s11740-019-00932-0}, pages = {5 -- 16}, language = {en} }