@misc{BiswasGarainMaityetal., author = {Biswas, Anirban and Garain, Samiran and Maity, Kuntal and Henkel, Karsten and Schmeißer, Dieter and Mandal, Dipankar}, title = {Influence of In situ Synthesized Bismuth Oxide Nanostructures in Self-poled PVDF-based Nanogenerator for Mechanical Energy Harvesting Application}, series = {Polymer Composites}, volume = {40}, journal = {Polymer Composites}, number = {S1}, issn = {0272-8397}, doi = {10.1002/pc.24628}, pages = {E265 -- E274}, abstract = {A self-poled piezoelectric nanogenerator (NG) based on bismuth oxide (Bi2O3) nanostructures (BNS)-doped poly(vinylidene fluoride) (PVDF) is demonstrated. The in-situ formation of BNS incorporated in the PVDF matrix is realized through a simple solution casting technique that favors the nucleation and stabilization of 99.6\% of the electroactive phase in PVDF (i.e., beta/gamma-phases). The enhancement of the output voltage (3.6 V) and current (2.4mA) of the NG based on a nonelectrically poled BNS containing PVDF composite film is achieved and demonstrated by simple repeated human finger imparting. The improvement of the output performance is influenced by the generation of the electroactive polar beta-phase in PVDF, due to the electrostatic interactions between the -CH2-/-CF2- dipoles of PVDF and the surface charge of the BNS. The NGs are able to charge up capacitors demonstrating that the power generation from such a hybrid device structure can be utilized for powering various portable devices.}, language = {en} } @misc{KotHenkelNaumannetal., author = {Kot, Małgorzata and Henkel, Karsten and Naumann, Franziska and Gargouri, Hassan and Tarnawska, Lidia Lupina and Wilker, Viola and Kus, Peter and Pożarowska, Emilia and Garain, Samiran and Rouissi, Zied and Schmeißer, Dieter}, title = {Comparison of plasma-enhanced atomic layer deposition AlN films prepared with different plasma sources}, series = {Journal of Vacuum Science and Technology A}, volume = {37}, journal = {Journal of Vacuum Science and Technology A}, number = {2}, issn = {0734-2101}, doi = {10.1116/1.5079628}, pages = {11}, abstract = {A comparative study of thin aluminum nitride (AlN) films deposited by plasma-enhanced atomic layer deposition in the SENTECH SI ALD LL system applying either a direct inductively coupled plasma (ICP) or an indirect capacitively coupled plasma (CCP) source is presented. The films prepared with the ICP source (based on a planar triple spiral antenna) exhibit improved properties concerning the growth rate per cycle, total cycle duration, homogeneity, refractive index, fixed and mobile electrical charges, and residual oxygen content compared to the CCP source, where the comparison is based on the applied plasma power of 200 W. The increase of the plasma power to 600 W in the ICP process significantly reduces the residual oxygen content and enhances the electrical breakdown field. The AlN layers grown under these conditions, with a growth rate per cycle of 1.54 {\AA}/cycle, contain residual oxygen and carbon concentrations of about 10\% and 4\%, respectively, and possess a refractive index of 2.07 (at 632.8 nm).}, language = {en} } @misc{RoyGhoshSultanaetal., author = {Roy, Krittish and Ghosh, Sujoy Kumar and Sultana, Ayesha and Garain, Samiran and Xie, Mengying and Bowen, Christopher Rhys and Henkel, Karsten and Schmeißer, Dieter and Mandal, Dipankar}, title = {A Self-Powered Wearable Pressure Sensor and Pyroelectric Breathing Sensor Based on GO Interfaced PVDF Nanofibers}, series = {ACS Applied Nano Materials}, volume = {2}, journal = {ACS Applied Nano Materials}, number = {4}, issn = {2574-0970}, doi = {10.1021/acsanm.9b00033}, pages = {2013 -- 2025}, abstract = {This paper reports a self-powered,flexible, piezo- and pyro-electric hybrid nanogenerator (NG) device that can be fixed on different locations of human skin for detecting static and dynamic pressure variations and can also monitor temperature fluctuations during the respiration process. An efficient and cost-effective fabrication strategy has been developed to create electrospun poly(vinylidene fluoride) (PVDF)/graphene oxide (GO) nanofibers, which are used to create a highly sensitive wearable pressure sensor and pyroelectric breathing sensor. The sensor can accurately and rapidly detect pressures as low as 10 Pa with a high sensitivity (4.3 V/kPa), a key performance indicator for wearable sensors. Importantly, the sensor exhibits a high sensitivity to bending and stretching by finger, wrist, and elbow. The pressure sensor is also highly sensitive to vocal vibrations when attached to the human throat. The device can generate a maximum output power density of∼6.2 mW/m2 when subjected to a compressive stress, which enhances its range of applications. Moreover, it is demonstrated that doping with GO improves the pyroelectric energy harvesting and sensing performance of the device under repeated temperature fluctuations. The PVDF/GO-based nanogenerator has a maximum pyroelectric output power density of∼1.2 nW/m2 and can sense temperature changes during respiration, which makes it promising as a pyroelectric breathing sensor. It is demonstrated that processing of the PVDF-GO self-powered multifunctional pressure and pyroelectric breathing sensor can be up-scaled for fabricating compact and high-performance electronic skins for application in health monitoring, motion detection, and portable electronics.}, language = {en} }