@misc{FrankenSommerhoffWillemsetal., author = {Franken, Tim and Sommerhoff, Arnd and Willems, Werner and Matrisciano, Andrea and Lehtiniemi, Harry and Borg, Anders and Netzer, Corinna and Mauß, Fabian}, title = {Advanced Predictive Diesel Combustion Simulation Using Turbulence Model and Stochastic Reactor Model}, series = {SAE technical paper}, journal = {SAE technical paper}, issn = {0148-7191}, doi = {10.4271/2017-01-0516}, language = {en} } @misc{NetzerFrankenLehtiniemietal., author = {Netzer, Corinna and Franken, Tim and Lehtiniemi, Harry and Mauß, Fabian and Seidel, Lars}, title = {Numerical Analysis of the Impact of Water Injection on Combustion and Thermodynamics in a Gasoline Engine using Detailed Chemistry}, series = {SAE technical papers}, journal = {SAE technical papers}, number = {2018-01-0200}, issn = {0148-7191}, doi = {10.4271/2018-01-0200}, pages = {14}, language = {en} } @inproceedings{FrankenNetzerPasternaketal., author = {Franken, Tim and Netzer, Corinna and Pasternak, Michal and Mauß, Fabian and Seidel, Lars and Matrisciano, Andrea and Borg, Anders and Lehtiniemi, Harry and Kulzer, Andr{\´e} Casal}, title = {Assessment of Water Injection in a SI Engine using a Fast Running Detailed Chemistry Based Combustion Model}, series = {Symposium of Combustion Control 2018, Aachen}, booktitle = {Symposium of Combustion Control 2018, Aachen}, address = {Aachen}, pages = {10}, language = {en} } @misc{FrankenNetzerMauss, author = {Franken, Tim and Netzer, Corinna and Mauß, Fabian}, title = {Water Injection in Spark-Ignition Engines, FVV Autumn Conference 2018}, language = {en} } @misc{FrankenNetzerPasternaketal., author = {Franken, Tim and Netzer, Corinna and Pasternak, Michal and Mauß, Fabian and Seidel, Lars and Matrisciano, Andrea and Borg, Anders and Lehtiniemi, Harry and Kulzer, Andr{\´e} Casal}, title = {Simulation of Spark-Ignited Engines with Water Injection using the Stochastic Reactor Model, 37th International Symposium on Combustion}, language = {en} } @misc{VaccaBargendeChiodietal., author = {Vacca, Antonino and Bargende, Michael and Chiodi, Marco and Netzer, Corinna and Gern, Maike Sophie and Kauf, Georg Malte and Kulzer, Andr{\´e} Casal and Franken, Tim}, title = {Analysis of Water Injection Strategies to Exploit the Thermodynamic Effects of Water in Gasoline Engines by Means of a 3D-CFD Virtual Test Bench}, publisher = {SAE International}, address = {Neapel}, doi = {10.4271/2019-24-0102}, abstract = {CO2 emission constraints taking effect from 2020 lead to further investigations of technologies to lower knock sensitivity of gasoline engines, main limiting factor to increase engine efficiency and thus reduce fuel consumption. Moreover the RDE cycle demands for higher power operation, where fuel enrichment is needed for component protection. To achieve high efficiency, the engine should be run at stoichiometric conditions in order to have better emission control and reduce fuel consumption. Among others, water injection is a promising technology to improve engine combustion efficiency, by mainly reducing knock sensitivity and to keep high conversion rates of the TWC over the whole engine map. The comprehension of multiple thermodynamic effects of water injection through 3D-CFD simulations and their exploitation to enhance the engine combustion efficiency is the main purpose of the analysis. As basis for the research a single cylinder engine derived from a 1l turbocharged 3-cylinders engine is used to evaluate indirect and direct water injection. The entire engine flow field is reproduced and analyzed with 3D-CFD simulations and numerical models are employed to separate the influence of chemical and thermodynamic properties. Measurements are performed with different injectors for indirect/direct water injection in the single-cylinder engine in order to assess water break-up, wall wetting, spray interaction and penetration. Several injection strategies, such as varying start of injection, injection pressure, and water to fuel ratio, are tested at the single-cylinder engine test bench. Detailed gas phase chemistry is employed to link flame front speed with water concentration and knocking occurrence. These results are correlated with the 3D-CFD simulation of mixture formation, in-cylinder flow and water distribution for two different operating points (part load and maximum power) in order to study water behavior, with focus on the evaporation process, in-cylinder pressure and temperature profile, as well as the combustion development, during multiple engine cycles.}, language = {en} } @misc{FrankenNetzerMaussetal., author = {Franken, Tim and Netzer, Corinna and Mauß, Fabian and Pasternak, Michal and Seidel, Lars and Borg, Anders and Lehtiniemi, Harry and Matrisciano, Andrea and Kulzer, Andr{\´e} Casal}, title = {Multi-objective optimization of water injection in spark-ignition engines using the stochastic reactor model with tabulated chemistry}, series = {International Journal of Engine Research}, volume = {20}, journal = {International Journal of Engine Research}, number = {10}, issn = {2041-3149}, doi = {10.1177/1468087419857602}, pages = {1089 -- 1100}, abstract = {Water injection is investigated for turbocharged spark-ignition engines to reduce knock probability and enable higher engine efficiency. The novel approach of this work is the development of a simulation-based optimization process combining the advantages of detailed chemistry, the stochastic reactor model and genetic optimization to assess water injection. The fast running quasi-dimensional stochastic reactor model with tabulated chemistry accounts for water effects on laminar flame speed and combustion chemistry. The stochastic reactor model is coupled with the Non-dominated Sorting Genetic Algorithm to find an optimum set of operating conditions for high engine efficiency. Subsequently, the feasibility of the simulation-based optimization process is tested for a three-dimensional computational fluid dynamic numerical test case. The newly proposed optimization method predicts a trade-off between fuel efficiency and low knock probability, which highlights the present target conflict for spark-ignition engine development. Overall, the optimization shows that water injection is beneficial to decrease fuel consumption and knock probability at the same time. The application of the fast running quasi-dimensional stochastic reactor model allows to run large optimization problems with low computational costs. The incorporation with the Non-dominated Sorting Genetic Algorithm shows a well performing multi-objective optimization and an optimized set of engine operating parameters with water injection and high compression ratio is found.}, language = {en} }