@misc{MaqboolBambach, author = {Maqbool, Fawad and Bambach, Markus}, title = {Revealing the Dominant Forming Mechanism of Single Point Incremental Forming (SPIF) by Splitting Plastic Energy Dissipation}, series = {Procedia Engineering}, volume = {183}, journal = {Procedia Engineering}, issn = {1877-7058}, doi = {10.1016/j.proeng.2017.04.018}, pages = {188 -- 193}, language = {en} } @inproceedings{MaqboolBambach, author = {Maqbool, Fawad and Bambach, Markus}, title = {A Modular Tooling Set-up for Incremental Sheet Forming (ISF) with Subsequent Stress-Relief Annealing under Partial Constraints}, series = {Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Dublin, Ireland, 26-28 April 2017}, booktitle = {Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Dublin, Ireland, 26-28 April 2017}, editor = {Brabazon, Dermot and Naher, Sumsun and Ahad, Inam Ul}, publisher = {AIP Publishing}, address = {Melville, New York}, isbn = {978-0-7354-1580-5}, doi = {10.1063/1.5008090}, language = {en} } @misc{MaqboolBambach, author = {Maqbool, Fawad and Bambach, Markus}, title = {Dominant deformation mechanisms in single point incremental forming (SPIF) and their effect on geometrical accuracy}, series = {International Journal of Mechanical Sciences}, volume = {136}, journal = {International Journal of Mechanical Sciences}, issn = {0020-7403}, doi = {10.1016/j.ijmecsci.2017.12.053}, pages = {279 -- 292}, language = {en} } @misc{MaqboolHajavifardWaltheretal., author = {Maqbool, Fawad and Hajavifard, Ramin and Walther, Frank and Bambach, Markus}, title = {Experimental investigation and finite element modelling of residual stress control in disc springs made of metastable austenitic stainless steel (MASS) using incremental sheet forming (ISF)}, series = {Procedia Manufacturing}, volume = {Vol. 29}, journal = {Procedia Manufacturing}, issn = {2351-9789}, doi = {10.1016/j.promfg.2019.02.099}, pages = {12 -- 20}, language = {en} } @misc{HajavifardMaqboolSchmiedtKalenbornetal., author = {Hajavifard, Ramin and Maqbool, Fawad and Schmiedt-Kalenborn, Anke and Buhl, Johannes and Bambach, Markus}, title = {Integrated Forming and Surface Engineering of Disc Springs by Inducing Residual Stresses by Incremental Sheet Forming}, series = {Materials}, volume = {12}, journal = {Materials}, number = {10}, issn = {1996-1944}, doi = {10.3390/ma12101646}, pages = {19}, language = {en} } @misc{AfzalMaqboolHajavifardetal., author = {Afzal, Muhammad Junaid and Maqbool, Fawad and Hajavifard, Ramin and Buhl, Johannes and Walther, Frank and Bambach, Markus}, title = {Modeling the Residual Stresses Induced in the Metastable Austenitic Stainless Steel Disc Springs manufactured by Incremental Sheet Forming by a Combined Hardening Model with Phase Transformation}, series = {Procedia Manufacturing : Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing : Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.300}, pages = {1410 -- 1415}, language = {en} } @misc{MaqboolMaassBuhletal., author = {Maqbool, Fawad and Maaß, Fabian and Buhl, Johannes and Hahn, Marlon and Hajavifard, Ramin and Walther, Frank and Tekkaya, A. Erman and Bambach, Markus}, title = {Targeted residual stress generation in single and two point incremental sheet forming (ISF)}, series = {Archive of Applied Mechanics}, volume = {91}, journal = {Archive of Applied Mechanics}, number = {8}, issn = {1432-0681}, doi = {10.1007/s00419-021-01935-z}, pages = {3465 -- 3487}, language = {en} } @inproceedings{MaqboolElzeSeidlitzetal., author = {Maqbool, Fawad and Elze, Lars and Seidlitz, Holger and Bambach, Markus}, title = {Comparison of Manufacturing of Lightweight Corrugated Sheet Sandwiches by Hydroforming and Incremental Sheet Forming}, series = {ESAFORM 2016, proceedings of the 19th International ESAFORM Conference on Material Forming, conference date: 27-29 April 2016, Nantes, France}, booktitle = {ESAFORM 2016, proceedings of the 19th International ESAFORM Conference on Material Forming, conference date: 27-29 April 2016, Nantes, France}, publisher = {AIP Publishing}, address = {Melville, NY}, isbn = {978-0-7354-1427-3}, doi = {10.1063/1.4963456}, language = {en} } @misc{MaqboolHajavifardWaltheretal., author = {Maqbool, Fawad and Hajavifard, Ramin and Walther, Frank and Bambach, Markus}, title = {Engineering the residual stress state of the metastable austenitic stainless steel (MASS) disc springs by incremental sheet forming (ISF)}, series = {Production Engineering}, volume = {Vol. 13}, journal = {Production Engineering}, number = {2}, issn = {0944-6524}, doi = {10.1007/s11740-018-0864-6}, pages = {139 -- 148}, language = {en} } @misc{MaqboolBambach, author = {Maqbool, Fawad and Bambach, Markus}, title = {Experimental and Numerical Investigation of the Influence of Process Parameters in Incremental Sheet Metal Forming on Residual Stresses}, series = {Journal of Manufacturing and Materials Processing}, volume = {3}, journal = {Journal of Manufacturing and Materials Processing}, number = {2}, issn = {2504-4494}, doi = {10.3390/jmmp3020031}, pages = {22}, language = {en} }